DPM 2012 R2 backup of Workgroup computer error

Hi, we have a Workgroup server that we had successfully backed up to a DPM 2012 Server.
Since then we have built 2 brand new DPM 2012 R2 servers.
I have uninstalled the DPM 2012 agent from the Workgroup computer and have installed the new DPM 2012 R2 agent successfully.
However, when i try to Attach the agent I am getting 'Unable to contact the protection agent on server' errors.
I have run the Set-DPMServer -IsNonDomainServer command correctly so the Firewall rules are there ( I have also turned the FW off to test but same error results). I am using the same account details created via Set-DPMserver to attach the agent on the DPM
server.
The Event Logs on the DPM 2012 R2 server show DCOM errors (Event 10028, DCOM was unable to communicate with the computer using any of the configured protocols; requested by PID 5e4 (C:\Program Files\Microsoft System Center 2012
R2\DPM\DPM\bin\msdpm.exe).)
I have even uninstalled the 2012 R2 agent and re-installed the 2012 agent and that attaches fine, no problem.
Can anyone help/advise?
David

Hi,
That is correct, ISCSI / Vfc attached or Pass-through disks are not included in host level backups. You have install a DPM agent inside the guest and protecting the volumes seperatly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 (ID 104 Details: Internal error code: 0x809909FF)

We are running DPM 2012 R2 on Windows Server 2012 R2
We have a Protection Group:Servers (9 members) where 5 servers always give the same error message, when we try to run a synchronization job with consistency check. With other 4 server everything is fine. (All 9 servers: Windows Server 2012 R2)
All servers have "Windows Server Backup" feature installed
Error message:
The replica of Microsoft Hyper-V \Online\S022 Reports on S022 Reports.SynCrust.********.eu is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can
recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
Any help would be appreciated

Just wanted to add some further details to this thread...
As suggested in
this article, Windows Server Backup has been installed on all 3 cluster nodes. I have also tried disabling/enabling the WinRE agent, as it suggests, with no effect.
The Virtual Machine I am trying to back up is running Windows Server 2008 R2 with the latest updates, and has integration services version 6.3.9600 installed.
Additional searching led me to
this article, which states "DPM works seamlessly with Hyper-V VSS writer to ensure that consistent versions of virtual machines are captured and protected without affecting virtual machine access." It doesn't clarify if this is the method used
when backing up VMs stored in a CSV, however. Regardless, the Hyper-V VSS writer is not listed when issuing
vssadmin list providers
I went through the steps outlined in
this article to install the writer, but even after following said steps, the writer still does not appear as registered on the Windows Server 2012 R2 cluster node via the above command.
I should also mention that
this prereqs article mentions that the Hyper-V role should be installed on the DPM server. The hardware I'm using has an old AMD Sempron 3400+ CPU, so I'm unable to install this role on the DPM. The article states "DPM protects Hyper-V virtual
machines even without the role, but you cannot perform item-level recovery (ILR) unless the role is installed.", so it's doubtful that lack of the role would cause this issue; MindaugasKa, is the Hyper-V role installed on your DPM?
Despite the effort of upgrading my storage server to Windows Storage Server Standard 2012 R2, my cluster nodes to Windows Server 2012 R2 Datacenter, and my DPM to 2012 R2, the
nightmare continues...

DPM 2012 table backup

Dear all,
I have intertied a DPM 2012 server which is perform short (to disk) and long (tape) backups. However the tape backups always seem to fail with various errors / warning. I have noticed that the server has fire streamer and a physical tape drive setup,
I would like to remove fire streamer and also get some granular logon on the errors so that I can perform some analysis.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can DPM 2012 R2 backup SQL Server 2012 AlwaysOn enabled databases

Is it possible to use DPM 2012 R2 for backing up
SQL Server 2012 AlwaysOn enabled databases ?
Because if Alwayson configured for any Database , particular database is not available to select for backup.

Hi,
Yes, starting with DPM 2012 SP1 SQL AlwaysOn enabled databases can be protected as long as they are not part of sharepoint farm. DPM shows the Availability Groups under Cluster Group.
You must explicitly add the system account NTAuthority\System or NT AUTHORITY\DPMRA to the Sysadmin group on SQL Server.
Protecting SQL Server Data
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

DPM 2012 R2 Consistency Check (Replica Inconsistent) Error for Failover Cluster

I have a SCDPM 2012 R2 instance running against a Windows Server 2012 R2 Failover Cluster on the network.
However, any new/migrated Roles/Virtual machines that I add under an existing protection group always gives me an error saying that the replica is inconsistent.
I've verified the following :
1. All windows updates are applied on the cluster hosts & the DPM server.
2. The VSS and DPMRA services are running on the hosts & DPM server.
3. The Windows Server Backup feature has been installed on all the machines as well.
4. The short term storage disks attached to the DPM server are LUNs and there is enough free space on those.
What else am I missing that could be causing the Replica to be inconsistent - considering that these are new VMs on the hosts themselves - is there a way to force a fresh replica to be created?

Do not remove any of the providers they come with the system. There is just something wrong with that VM, your trying to backup, as it could take the initial replica creation.
Check all of the following
1) Make sure you have enough C drive space on the guest - need space to create a snapshot
2) Check the vssadmin list wirters for any errors
If none of the above, rerun the consistency check when no other backup is running. Check the Application log on the host for any vss failures
Ensure you have all the DPM hotfixes - I am compiling a list since i've been thru many DPM issues.
Great product when you get it going but like any product there are bumps in the road :)
ANNCEX

DPM 2012 R2 backup Causes Redirected CSV IO on SOFS Cluster.

Hi, I have a Scale out Storage Spaces Server with 2 nodes, and a 10 node 2012 R2, Hyper-V cluster using this via SMB3.0
I also have installed a DPM2012 R2 backup server.
the DPM agent is installed on all nodes of all servers and I have followed the pre-requisite from Microsoft for setting up DPM backup of SMB Hyper-V machines.
The DPM backups all work fine. but occasionaly I get these errors on the SOFS cluster.
Cluster Shared Volume 'Volume3' ('Cluster Disk 4') has entered a paused state because of '(c0130021)'. All I/O will temporarily be queued until a path to the volume is reestablished.
I really thought this issue had been resolved in this revision, this doesn't seem to cause any issues with my VM's that I can notice. and all DPM backups are working fine, but it still causes me concern.
has anyone else seen this or have any suggestions what I can try to resolve.
Regards
Mark Green

We also encounter this issue. We use Windows Server 2012 R2 and SCVMM 2012 R2 (with RU1). Be carefull with this issue, because it can cause serious issues. Btw, note that Windows Server 2012 R2 used Direct I/O instead of Redirected I/O.
If you can't find a full fix as we are in right now, there are two things that might offer a work-around for you:
Disabled ODX (if your storage system does not support it):
Deploy Windows Offloaded Data Transfers
http://technet.microsoft.com/en-us/library/jj200627.aspx
Serialize virtual machine backups per node
Migrate to a hardware VSS provider
http://technet.microsoft.com/en-us/library/hh758027.aspx
The second option works best, because this issue mostly occurs when you run a backup of many VMs at once. It it not a full fix and makes you backup windows much longer, but can avoid you other problems. Also keep a close eye on this link:
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://support.microsoft.com/kb/2920151
Boudewijn Plomp, BPMi Infrastructure & Security

DPM 2012 SP1 Backup to Cloud

I realize I'm going to be a little ahead of where the software is on this one but on the subjects of backups, DPM, Instead of pointing DPM to the azure public cloud can I use our Private Cloud (Windows 2012, System Center 2012 SP1 + Azure Services for
Windows Server)?
Thanks
Si
Simon Stearn - Militant South - Agile Architecture

I assume that when you say Azure Services for Windows Server, you are referring to Windows Azure Pack?
If you are doing this on premise then I think you would need to stick to the conventional DPM-to-DPM model?
I can't personally imagine that the DPM team will add the ability to use the Cloud Backup feature with an on premise Azure cloud as the capability for on premise off-site backup is already there in DPM-to-DPM.
Thanks,
Richard
Richard Green | MCSA 2012, MCSE 2003, MCTS Desktop Virtualization, VCP5-DV http://richardjgreen.net

Secondary DPM 2012 server throws Datasource enumeration details error when trying to open Primary DPM server

I have just installed 2 fresh servers.
DPM1
DPM2
DPM1 is online and working great but when I setup DPM2 I installed the agent to DPM1 so that I could have a secondary server to backup all of DPM1 information. When creating the protection group I double clicked on DPM1 and received this.
Any help would really be appreciated.

Hi
Why dont you backup DPM sql database to a share then backup the share with DPM2?

Manual install of DPM 2012 SP1 protection Agent and how to automatically approve Microsoft Software License term ?

Hi All,
When installing manually protection agent DPM 2012 SP1 on new target computer, I get "Microsoft Software License terms" to accept...
Is there a way to automatically approve the license ? I try various commands like :
/quiet
/quiet /eula:yes
/quiet /AcceptEula:yes
Mike, if you're around any
suggestion is welcome :)
Stephane.
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog

Thks Geaux-Tigers,
it works like a charm :)
I also found the DPM technet link: http://technet.microsoft.com/en-us/library/jj650955.aspx
DpmAgentInstaller.exe [/q] [<DPM server name>] [/IAcceptEula]
Stephane
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog

DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Joseph

i have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph

DPM 2012 R2 failing on backup of BMR and System State

We are running DPM 2012 R2 on Windows Server 2012 and I am trying to protect another Windows 2012 Server with a Bare Metal Recovery and system state but it fails on initial synchronization. I get the following error in DPM:
DPM failed to create the backup. If you are backing up only System State, verify if there is enough free space on the protected computer to store the System State backup. On protected computers running Windows Server2008, verify that Windows Server
Backup (WSB) is installed and that it is not performing any other backup or recovery task. (ID 30214 Details: Internal error code: 0x80990ED0)
This is a new server and there is 65.7 GB of 99.9 GB free on the C drive. 131 of 136 GB free on the F drive. The P drive only has 100 MB free of 36.3 GB but that is where the pagefile is located, nothing else is on the P drive.
Would that be a problem or is that irrelevant?
The replica volume is 30 GB and the recovery point volume is 6.06 GB. I tried increasing the replica volume all the way up to 200 GB and the recovery point volume to 30 GB but that didn't matter.
Why is this not working?

Hi,
Try this and troubleshoot any errors along the way.
1) Set up a network share on a remote machine
\\server\bmrshare
2) From an administrative command prompt on the Protected Server you want the BMR backup for, type:
wbadmin.exe start backup -allcritical -backuptarget:\\server\bmrshare
This should show you the list of volumes included in the BMR backup and ask "Do you want to start the backup operation?. - Type
Y to continue..
3) Once completed, see how large the BMR backup is on the remote server, then resize the DPM replica accordingly to accommodate the size of the manual BMR backup.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Crashes after upgrade - Tape Backup

Hello guys,
I have recently upgraded from DPM 2012 SP1 to DPM 2012 R2 Rollup 3 on Windows 2012 R2 (in-place upgrade)
The basic procedure was to backup the DB, uninstall DPM, install DPM 2012 R2, restore the DB. re-sync all the inconsistent replicas and upgrade server agents. When it comes to the offsite tape backup for whatever reason every time the tape backup
commences it fails instantly with the below error and reports "Backup to Tape Failed"
"Event Log shows MSDPM Error ID 945"
It appears to be failing due to a missing stored procedure 'dbo.prc_SMTE_ComputeDailyTrend'. The stored procedure does not exist on other DPM servers. I'm guessing this is something hanging around in the DB from prior to the upgrade but I can't
seem to track it down. Does anyone have any ideas upon how to resolve the issue?
The description for Event ID 945 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Unable to connect to the DPM database because of a general database failure. Make sure that SQL Server is running and that it is configured correctly.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>84123</Seq><TimeCreated>25/10/2014 23:01:01</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlException</ExceptionType><ExceptionMessage>Could
not find stored procedure 'dbo.prc_SMTE_ComputeDailyTrend'.</ExceptionMessage><ExceptionDetails>System.Data.SqlClient.SqlException (0x80131904): Could not find stored procedure 'dbo.prc_SMTE_ComputeDailyTrend'.
   at Microsoft.Internal.EnterpriseStorage.Dls.SummaryManager.SummaryManagerMachine.OnStart(ErrorInfo& eInfo)
   at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.SimpleStateMachine.Start(Message msg)
   at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.Fsm.Engine.ChangeState(Message msg)
   at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.TaskInstance.Process(Object dummy)
   at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.FsmThreadFunction.Function(Object taskThreadContextObj)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
ClientConnectionId:fbd15cf8-5b7b-4438-befe-a3a54426d371</ExceptionDetails></FatalServiceError>

For this issue, you can refer below link
http://blogs.technet.com/b/dpm/archive/2012/01/30/fix-the-dpm-console-crashes-and-logs-event-id-945-when-making-any-changes.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Backup fails for a Hyper-V guest with VSS Writer failures using DPM 2012 R2 - Hyper-V guest has Oracle application installed,

I am trying to backup a VM which before it had Oracle installed backed up with no problems. It is a Windows 2008 R2 server which sites on an 8 node Hyper-V 2012 R2 cluster (with CSVs). I am using DPM 2012 R2 to run the backups which have been
successful for the last few weeks but then Oracle was installed and the backups have failed since then.
The job fails and a large number of VSS writers go into a 'Failed' state with the 'Last Error' showing as 'Timed out'. I then get 4 popups appear each referring to a 'temporary' drive which appears briefly in Disk Management with a RAW file system.
These pops say "You need to format the disk in drive X: before you can use it. Do you want to format it?" (where
X: is replaced by the drive letter assigned to each 'temporary' drive).
The System event log is populated with a large number of warnings with Event 51, Disk, stating "An error was detected on device \Device\Harddisk<number>\DR<number> during a paging operation". There are also a
few warnings for Ntfs (eventid 57) stating that "The system failed to flush data to the transaction log. Corruption may occur."
Prior to these warnings there are 5 other warnings for partmgr (eventid 58) stating "The disk signature of disk
<number x> is equal to the disk signatuire of disk <number y>" and 4 errors (eventid 1, VDS Basic Provider), "Unexpected failure. Error code: 490@01010004".
There is a script which is run to stop the Oracle application on the server and if this is run then the backups will complete successfully. We have been troubleshooting this by running a certain amount of the script and seeing which part affects the
backup and it seems that if the Weblogic (wls_reports) service is stopped then the backup will succeed but if it is running then the backup will fail and the above symptoms occur.
Another point which may help is that there is a pre-production server which resides on a Windows 2008 R2 Hyper-V standalone server, has the same scripts and installation of Oracle but backs up without any issues.
I have experienced VSS writer failures before with VM backups but I have not seen this before. It is not intermittent and I can find no work around to alleviate the problem of having no backup (except stopping this service or shutting the server down,
but as it is a production server this is not practical).
If anyone has experienced this before or have any suggestions / advice it would be much appreciated.
Thanks
Chris

Hi Chris
I have exactly the same issue.
2008 R2 Server running Oracle
6 node 2012 R2 Hyper-V Cluster with CSV
Exact same errors and popup "format disk" message.
DPM2012 R2
I also have some other VM's on the same cluster which do back up through DPM
The only difference I can see is the server which has the issue has a legacy network adapter.
Production server so cannot make any changes until later but will add new adapter and report back.
Interesting about the Weblogic service, may test this also.
Cheers
Kev.

DPM 2012 R2 backup of Workgroup computer error

Similar Messages

Maybe you are looking for