DPM 2012 R2 journal wrap error

Hi,
i try to backup my active directory Using DPM 2012 R2.Below error has occurred.
A journal wrap error has occurred on the change journal, and therefore DPM is unable to track any more changes or may have missed some changes for the data source C:\ on DC-Name.domin (ID 30117 Details: Internal error code: 0x809909D1)

Hi,
In the alert, Click the link to run synchronization with consistency check.
If the problem persists, you can increase the change journal size or configure the current protection group to synchronize more often. To change the synchronization schedule, select the protection group in the Protection task area, and in the Actions pane,
click Modify protection group. To change the change journal size, click Modify disk allocation, select the Protected Server tab, click Modify, and then change the space allocated.
If you consistently get that error, then it may be antivirus s/w that is causing the USN to wrap.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Server 2012 in Journal Wrap - how to resolve

Server 2012 AD controller running in 2008R2 native domain. Even logged showed that DFSR was not replicating.
Ran the command in event log.
After running the command, my Domain is in Journal wrap. How do I correct that on a 2012 server?
Command and output:
wmic /namespace:\\root\microsoftdfs path dfsrVolumeConfig where volumeGuid="8D7CDF6C-EAC3-11E2-93E8-806E6F6E6963" call ResumeReplication
Executing (\\SRV-DC2\root\microsoftdfs:DfsrVolumeConfig.VolumeGuid="8D7CDF6C-EAC
3-11E2-93E8-806E6F6E6963")->ResumeReplication()
Method execution successful.
Out Parameters:
instance of __PARAMETERS
ReturnValue = 0;
Journal wrap event:
The DFS Replication service stopped replication on the replicated folder at local path C:\Windows\SYSVOL\domain.
Additional Information:
Error: 9073 (Content set initialization is pending journal wrap task to resume journal read)
Additional context of the error:
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: A0619EF8-0AF7-4316-80E6-DEBB7B816600
Replication Group Name: Domain System Volume
Replication Group ID: 41C2BF18-BF26-48A0-942F-630AF2EC4472
Member ID: F258A22F-33D4-46CC-A5F0-029E06D54A99
thanks
The Mirazon Group

The root cause of this was discovered to be Veeam backup. We got parts of the fix from a few different replies.
Basically stop DFSR service on other dc’s.
To perform an authoritative synchronization of DFSR-replicated SYSVOL, we set:
msDFSR-Enabled=FALSE
msDFSR-options=1
More details:
http://support.microsoft.com/kb/2218556
The option “msDFSR-Options”=1 is what makes a SYSVOL as primary or in other words as authoritative. Not using this option implies the non-authoritative restore.
Here’s the screen shot of what this setup looked like to clear everything up.
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe"
stroked="f"><v:stroke joinstyle="miter"><v:formulas></v:formulas></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:1200pt;height:603pt;"
type="#_x0000_t75"><v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\MICHAE~1.PAT\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png">
</v:imagedata></v:shape>
The Mirazon Group
A couple of the Mirazon engineers working from the information we found here, let to the answer.
thanks

DPM 2012 UR3 Agent Update Error: HRESULT E_FAIL...DCOM Error

My DPM Server is Windows 2008 R2 SP1 with a locally installed SQL and DPM Server and fully patched. My Workstations are all Windows 7 Ultimate x64, fully patched. I have manually installed the DPM RTM Agent and pushed the UR2 update from the DPM Server
without any challenges or issues. I have SCEP running with process exclusions for the DPM services on the WS and DPM Server. I’ve been running DPM 2012 RTM and then UR2 without any issues or challenges to-date.
I have recently updated my DPM 2012 Server from UR2 to UR3 and pushed out all the Agent Updates, which appeared to go successfully from the DPM Console perspective. I spot checked a few systems, 1 workstation (WS) and 1 server, everything looked good. A
couple of days after this I noticed 2 of my workstations failed backing up to Tape. I noticed the recovery options available for these WS’s have stopped updating hours after pushing the UR3 Agent update. The 2 WS’s I'm troubleshooting have a little different
scenario. I have 2 other WS’s that were updated in the same manner and are working perfectly.
Both WS cannot connect to the DPM Server and displays this DCOM Error:
"ERROR:ERROR HRESULT E_FAIL has been returned from a call to a COM component."
The 1st WS DPM Client has a Yelow Sign over-lay and "Administrator has not configured backups." when you hover over it.
The 2nd WS does not the Yellow Sign over-lay.
All the properties of the Local DPM Client Console 'Summary and Protected item' tabs are not updated on the 1st WS but are on the 2nd WS.
1st WS process:
The Recovery Tab shows the available recover dates to choice from.
I can expand one of the backup dates, folders and copy a file to this system.
I can view my previous recovery Points from the console dating back to when I updated the Agents.
I’ve validated the DCOM settings on both WS's compared to a WS that is working, they are the same.
I uninstalled the agent manually, then copied and reinstalled the new UR3 Agent Version with the same outcome.
I uninstalled the new version and reinstalled the previous version, same error.
I then proceeded with upgrading UR2 agent version installing the UR3 version over the top, same error.
I logged on to this WS as the Domain Admin, removed and reinstalled the UR3 version, same error.
I removed, applied and then re-added the DPM server to the local WS DPM and DCOM Groups.
I removed, applied and then re-added the WS from the Groups on the DPM Server.
I’m able to see, ping and view other backup folders presented on the DPM server on this WS.
In the DPM Console I am able to connect to this Workstation successfully from the Administrative, Agent Space.
The DPMClientProtectionCurr.errlog file shows this repeatedly:
0FC0
065C    10/13   05:02:32.499
03        service.cpp(298)
[000000000021FD90]
ACTIVITY
CService::AnnounceServiceStatus
0FC0
0D18    10/13   05:02:33.059
33        dlsclientprotection.cpp(778)
[00000000002BC850]
NORMAL
Connecting to DPM Server: (<Server.FQDN>)
0FC0
0D18    10/13   05:02:33.171
33        dlsclientprotection.cpp(861)
[00000000002BC850]
WARNING         Failed: Hr: = [0x80004005] : Failed to set client OS details - ClientName:<WS.FQDN>, ClientOSVersion:6.1.7601, OSType:2, AgentVersion: 4.0.1920.0
0FC0
0D18    10/13   05:02:33.171
33        dlsclientprotection.cpp(1490)
[00000000002BC850]
WARNING         Failed: Hr: = [0x80004005] : Failed to get connection to DPM server: lVal : ConnectToDPMServer(bstrClientMachineName, &pIUnknown, &fConnectionSuccessful, &dCurrentStatus,
exceptionResult)
The
DPMRACurr.eerlog show this for both WS's:
0EF0 1110 10/13 04:05:02.157 22 genericthreadpool.cpp(824) [000000000093C360]  NORMAL Hr: = [0x80070002] CGenericThreadPool::m_dwMaximumNumberOfThreads[20]
0EF0 1110 10/13 04:05:02.157 03 miscellaneousutils.cpp(918)   NORMAL Error:ERROR_UNKNOWN_PRODUCT, While detecting DPM version. Assuming DPM isnt installed.
And this one repeatedly:
0BE8 08EC 10/13 13:59:40.404 29 radefaultsubtask.cpp(382) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID does not exist, {DB3F138D-DE37-414D-BADC-5A161C6E7E1C}
0BE8 08EC 10/13 13:59:40.404 05 defaultsubtask.cpp(546) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceivedSpecific(pCommand,
pOvl)
0BE8 08EC 10/13 13:59:40.404 05 defaultsubtask.cpp(751) [00000000002F1640] 4F801526-72F2-4460-8760-F9D6E127FECB WARNING Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceived(pAgentOvl)
The 2nd WS Process:
I did not remove or touch the local agent installation because the information is populated on this client’s agent properties fields.
I can see the folder selections I’ve chosen to be backed up by the protection group configuration.
When i open the Agent UI I receive the sam DCOM error.
I also receive a different error message on this WS when I try and do a Sync Now from the General Tab: Failed to trigger synchronization.
I was able to perform a consistency check on this WS that completed successfully from the DPM server.
I’ve validated the networking configuration settings are correct.
I flushed local DNS cache.
Thanks,
Paul

Hi,
I have a Windows 7 x64 machine that exhibits this problem. It seems that it is not caused on the client side but on the server side.
In our case the server logs the following every time the client tries to connect:
WARNING   Verify disconnected client failed with exception: System.ArgumentException: Das Element wurde bereits hinzugefügt. Schlüssel im Wörterbuch: "<machinename>". Hinzuzufügender Schlüssel: "<machinename>".
(Translation: Element has already been added. Key in Table: "<machinename>". Key to be added: "<machinename>".
I have uninstalled the agent on the client several times. One time I have seen the following error message on the server side:
Deployment.cs(2815)           NORMAL   Removing all agent records for server[<machinename>] from table InstalledAgent.
ntlmutils.cpp(185)           WARNING   Failed: Hr: = [0x80070002] : Error trying to open key [HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\NtlmAuthData\<machinename>]
SchedulerImpl.cs(166)           NORMAL   Entering DeRegister, JobDefID: bafe2b8b-53b2-4694-aa28-9e2c6c152d51
Catalog.cs(1006)           WARNING   No retry on exception The specified @name ('') does not exist. while executing sp_delete_alert
Catalog.cs(1013)           WARNING   SqlException encountered, SqlRetryCommand diag details - SqlCommandText => Name=msdb.dbo.sp_delete_alert, CommandType=StoredProcedure
Catalog.cs(1013)           WARNING   CommandDiagInfo => CanRetry=False, CommandTimeout=3600
Catalog.cs(1013)           WARNING   CommandParams   => Count=2, InTx=True
Catalog.cs(1013)           WARNING         Param[0]   => ParameterName=@name | Value= | Size=0 | DbType=NVarChar | Direction=Input | IsNullable=False
Catalog.cs(1013)           WARNING         Param[1]   => ParameterName=@RETURN_VALUE | Value=1 | Size=0 | DbType=Int | Direction=ReturnValue | IsNullable=False
EventManager.cs(98)           NORMAL   Publishing event from SchedulerImpl.cs(838): JobScheduleChange, [JobDefID=bafe2b8b-53b2-4694-aa28-9e2c6c152d51]
Errors on the client side appear the moment the agent is re-added to the DPM server (I use "connect agent" instead of "install agent"). After that moment I get the message "Error connection to the DPM server. Error: a COM-component returned E_FAIL" every time
I open the DPM client. This is mirrored by the Verify error mentioned above on the server side.
To me it seems that parts of the machine config are still in the MSDB after removal (maybe caused by the registry error). If this client is connected again, the orphaned database entries cause the Verify error
If that's true, how could we get rid of those entries? Would it help to rename the client?
Uwe

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057)) After DPM 2012 SP1 to R2 Upgrade

Hi,
We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.
Now in File Protection Group, we receive error
"An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".
This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.
We tried,
Deleted entire protection group and recreated ,
Ran consistency job 2 to 3 times.
Ran Synchronize with consistency check.
But every time It failed. Before upgrade it was working fine.
Thanks

Hi
I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057)
issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here
http://support.microsoft.com/kb/2904687/en-us
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your
question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

DPM 2012 setup to remote SQL 2012. SSL cert error

First of all, the category I selected, which was for SQL server reporting services was as close as I could get. There wasn't a way to select System Center DPM server from the list. As this relates to the Report Server portion of the setup, I chose this category.
I am setting up DPM 2012 SP1 on a single use server (Windows Server 2102 R2 Standard) and remotely connecting to a new DB server (MSSQL 2012). I keep getting error ID:812 when trying to install, and the logs show that it is trying to set up report server,
but that it cannot establish a trust relationship for SSL/TLS.
* Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS
secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
I'm not clear on how to proceed. Invalid cert means it wants something very specific.
I have installed a domain issued cert from the DC on the SQL reporting server and have bound that cert to SSL using report server configuration. I then imported the cert into the DPM server in the trusted and personal certs. The DPM server has our DC as
a trusted source. That clearly doesn't work.
Thinking I may not be able to use a self-signed cert, I then installed our wildcard cert onto both the SQL server and the DPM server. I ran through the Report Server configuration again and bound that wildcard. This is a Godaddy wildcard cert.
Same problem no matter what I do. Clearly, this is matter of a cert issue, but I'm lost. There are zero instructions I've found on how to ensure Windows server 2012 cert requirements are met as it relates to SQL and DPM.
Thanks for your advice.
Kaden

Hi Kaden,
This thread is for reporting service and I hope i can provide some useful informaiton from reporting service side while i don't work on DPM at all. You may still need to find out the forum for the DPM and check there.
Regardingless of DPM, Reporting Service can usually create HTTP link and HTTPS link together. For the HTTP one, a certificate is needed. HTTPS is not needed excep you have the concern with security.
Usually application like DPM/SCOM will connect to the web service link provided by Reporting Service and work on that.
If the application requires a HTTPS link, then same thing has to be setup on reporting.
You need to install a certificate and add it to trust store and then configure reporting service to listening on HTTPs 443 port from the reporting service configuration manager.
You can find the steps here.http://technet.microsoft.com/en-us/library/ms345223(v=sql.110).aspx
After you create the HTTPS link successful, try to open the https web service link both remotely or locally from IE. If you can open it there without any error, reporting service is working fine.
For some applications, they would need special certificates installed on reporting service and used. You may check with the related product on this then.
In a summary, if you can configure a HTTPS link for reporting service can open it correctly, configuration steps on reporting service is fine.
If there is still any error from DPM, you would need check additional resource from DPM part.
Thanks,

DPM 2012 R2 (ID 104 Details: Internal error code: 0x809909FF)

We are running DPM 2012 R2 on Windows Server 2012 R2
We have a Protection Group:Servers (9 members) where 5 servers always give the same error message, when we try to run a synchronization job with consistency check. With other 4 server everything is fine. (All 9 servers: Windows Server 2012 R2)
All servers have "Windows Server Backup" feature installed
Error message:
The replica of Microsoft Hyper-V \Online\S022 Reports on S022 Reports.SynCrust.********.eu is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can
recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
Any help would be appreciated

Just wanted to add some further details to this thread...
As suggested in
this article, Windows Server Backup has been installed on all 3 cluster nodes. I have also tried disabling/enabling the WinRE agent, as it suggests, with no effect.
The Virtual Machine I am trying to back up is running Windows Server 2008 R2 with the latest updates, and has integration services version 6.3.9600 installed.
Additional searching led me to
this article, which states "DPM works seamlessly with Hyper-V VSS writer to ensure that consistent versions of virtual machines are captured and protected without affecting virtual machine access." It doesn't clarify if this is the method used
when backing up VMs stored in a CSV, however. Regardless, the Hyper-V VSS writer is not listed when issuing
vssadmin list providers
I went through the steps outlined in
this article to install the writer, but even after following said steps, the writer still does not appear as registered on the Windows Server 2012 R2 cluster node via the above command.
I should also mention that
this prereqs article mentions that the Hyper-V role should be installed on the DPM server. The hardware I'm using has an old AMD Sempron 3400+ CPU, so I'm unable to install this role on the DPM. The article states "DPM protects Hyper-V virtual
machines even without the role, but you cannot perform item-level recovery (ILR) unless the role is installed.", so it's doubtful that lack of the role would cause this issue; MindaugasKa, is the Hyper-V role installed on your DPM?
Despite the effort of upgrading my storage server to Windows Storage Server Standard 2012 R2, my cluster nodes to Windows Server 2012 R2 Datacenter, and my DPM to 2012 R2, the
nightmare continues...

DPM 2012 R2 backup of Workgroup computer error

Hi, we have a Workgroup server that we had successfully backed up to a DPM 2012 Server.
Since then we have built 2 brand new DPM 2012 R2 servers.
I have uninstalled the DPM 2012 agent from the Workgroup computer and have installed the new DPM 2012 R2 agent successfully.
However, when i try to Attach the agent I am getting 'Unable to contact the protection agent on server' errors.
I have run the Set-DPMServer -IsNonDomainServer command correctly so the Firewall rules are there ( I have also turned the FW off to test but same error results). I am using the same account details created via Set-DPMserver to attach the agent on the DPM
server.
The Event Logs on the DPM 2012 R2 server show DCOM errors (Event 10028, DCOM was unable to communicate with the computer using any of the configured protocols; requested by PID 5e4 (C:\Program Files\Microsoft System Center 2012
R2\DPM\DPM\bin\msdpm.exe).)
I have even uninstalled the 2012 R2 agent and re-installed the 2012 agent and that attaches fine, no problem.
Can anyone help/advise?
David

Hi,
That is correct, ISCSI / Vfc attached or Pass-through disks are not included in host level backups. You have install a DPM agent inside the guest and protecting the volumes seperatly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 VSS Errors

We have our DPM 2012 R2 installation on Windows 2008 R2 servers. We encounter failures some of the time on our Full Express Backups on Friday evenings where we get VSS errors in the event logs.
Event 12298
Event 12289
We haven't encountered these issues until recently. Is there any idea on how to remedy these. I just installed DPM 2012 R2 this week so I am hoping it helps. But does anyone know if there is a hotfix or something for this in case it does not. I read about
these events having a hotfix for Windows 2003 servers but not Win2K8?

Event 12289
Volume Shadow Copy Service error: Unexpected error DeviceIoControl(\\?\Volume{XXXXXXX]). hr = 0x80070057, The parameter is incorrect.
Operation:
Processing EndPrepareSnapshots
Context:
Execution Context: System Provider
Event 12298
Volume Shadow Copy Service error: The I/O writes cannot be held during the shadow copy creation period on volume \\?\Volume{XXXXXXXXX}\. The volume index in the shadow copy set is 0. Error details: Open[0x00000000, The operation completed successfully.
], Flush[0x00000000, The operation completed successfully.
], Release[0x00000000, The operation completed successfully.
], OnRun[0x80042314, The shadow copy provider timed out while holding writes to the volume being shadow copied. This is probably due to excessive activity on the volume by an application or a system service. Try again later when activity on the volume is reduced.

Pagefile exclusion for VHDs is not functional System Center DPM 2012 R2

The Release Notes for Data Protection Manager in System Center 2012 R2 state that:
Pagefile exclusion for VHDs is not functional
Description: Pagefile exclusion for virtual hard disk files (VHDs) is not functional.
Workaround: None.
I feel silly asking this in the forums, but my mind just can't wrap around the fact that this feature (that was just recently added in DPM 2012 SP1) is broken in the new release of 2012 R2. Does anyone with actual knowledge of the product have any
additional info on this issue? Do we need to wait for a service pack to fix it or are there possibly ANY workarounds or situations where it might be used?
TIA

Hi,
This is a documentation error and will get it addressed. DPM 2012 R2 RTM does still support page file VHD exclusion same as DPM 2012 SP1.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 upgrade to 2012 SP1

I'm trying to update my DPM 2012 server to DPM 2012 SP1 (with UR3).To install SP1, i need the DPM 2012 UR3 (KB2751230) installed, however each time i get "The DPM installation Failed"
[Log Extract]
MSI (s) (4C:70) [14:25:51:688]: Product: Microsoft System Center 2012 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2751230' could not be installed. Error code 1603. Additional information is available in the log file
C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2751230.log.
MSI (s) (4C:70) [14:25:51:689]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 - Data Protection Manager. Product Version: 4.0.1908.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft Data
Protection Manager 2010 Update - KB2751230. Installation success or error status: 1603.
MSI (s) (4C:70) [14:25:51:689]: Note: 1: 1729
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:691]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:691]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:691]: Product: Microsoft System Center 2012 - Data Protection Manager -- Configuration failed.
[/Log]
I saw this post and it didnt help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ef8342a8-7a90-4eb1-b905-56deb0402d77/dpm-2012-update-rollup-3-could-not-be-installed
I have sysadmin rights on the DB, and am a domain admin, running the install as admin. I have also tried running it without the backup of the db, but that didnt work at all.
Can someone point me in the right direction?

Hi
Can you search the DataProtectionManager-KB2751230.log from the bottom up for the string: InstallExecute. Return value 3.
The real cause of the failure will be right above that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Backup fails for a Hyper-V guest with VSS Writer failures using DPM 2012 R2 - Hyper-V guest has Oracle application installed,

I am trying to backup a VM which before it had Oracle installed backed up with no problems. It is a Windows 2008 R2 server which sites on an 8 node Hyper-V 2012 R2 cluster (with CSVs). I am using DPM 2012 R2 to run the backups which have been
successful for the last few weeks but then Oracle was installed and the backups have failed since then.
The job fails and a large number of VSS writers go into a 'Failed' state with the 'Last Error' showing as 'Timed out'. I then get 4 popups appear each referring to a 'temporary' drive which appears briefly in Disk Management with a RAW file system.
These pops say "You need to format the disk in drive X: before you can use it. Do you want to format it?" (where
X: is replaced by the drive letter assigned to each 'temporary' drive).
The System event log is populated with a large number of warnings with Event 51, Disk, stating "An error was detected on device \Device\Harddisk<number>\DR<number> during a paging operation". There are also a
few warnings for Ntfs (eventid 57) stating that "The system failed to flush data to the transaction log. Corruption may occur."
Prior to these warnings there are 5 other warnings for partmgr (eventid 58) stating "The disk signature of disk
<number x> is equal to the disk signatuire of disk <number y>" and 4 errors (eventid 1, VDS Basic Provider), "Unexpected failure. Error code: 490@01010004".
There is a script which is run to stop the Oracle application on the server and if this is run then the backups will complete successfully. We have been troubleshooting this by running a certain amount of the script and seeing which part affects the
backup and it seems that if the Weblogic (wls_reports) service is stopped then the backup will succeed but if it is running then the backup will fail and the above symptoms occur.
Another point which may help is that there is a pre-production server which resides on a Windows 2008 R2 Hyper-V standalone server, has the same scripts and installation of Oracle but backs up without any issues.
I have experienced VSS writer failures before with VM backups but I have not seen this before. It is not intermittent and I can find no work around to alleviate the problem of having no backup (except stopping this service or shutting the server down,
but as it is a production server this is not practical).
If anyone has experienced this before or have any suggestions / advice it would be much appreciated.
Thanks
Chris

Hi Chris
I have exactly the same issue.
2008 R2 Server running Oracle
6 node 2012 R2 Hyper-V Cluster with CSV
Exact same errors and popup "format disk" message.
DPM2012 R2
I also have some other VM's on the same cluster which do back up through DPM
The only difference I can see is the server which has the issue has a legacy network adapter.
Production server so cannot make any changes until later but will add new adapter and report back.
Interesting about the Weblogic service, may test this also.
Cheers
Kev.

DPM 2012 Install Fails, The Database was not Created ID 811

Hi.
I've tried installing DPM on a Standalone Server (SQL + DPM), and get the "Database was not Created" error. I initially tried DPM 2012 R2, and found that there is an issue with Disjoint Namespaces, so went to DPM 2012 SP1, but still getting
the same error.
The Install Account has full access rights (sysadmin) to the DPM SQL Instance, however cannot seem to get it right. The account using to do the install has full Enterprise admin, Domain Admin, Backup Operators & Administrators rights.
When opeining SQL Managemet studio, I can see the database has been created but the setup fails and requires me to revert.Here is the last few lines of the Install Log File, please help I always mark as answer.
2014-10-01 08:54:49 PM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
[2014-10-01 08:54:49 PM] Information : Creating tables
[2014-10-01 08:54:49 PM] Information : Execute the SQL script
[2014-10-01 08:54:49 PM] Data : FileName = "D:\Program Files\Microsoft System Center 2012\DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[2014-10-01 08:54:49 PM] Data : Arguments = -b -E -d DPMDB_S_PRODBACKUP -i MiniSetupDBConfiguration.sql -r -S S-PRODBACKUP\SCDPM
[2014-10-01 08:54:49 PM] Data : Error code = 0
[2014-10-01 08:54:49 PM] Information : Adding DPM Server entry in tbl_AM_Server table
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
[2014-10-01 08:54:50 PM] Data : Database connection string = Integrated Security=SSPI;server=S-PRODBACKUP\SCDPM;Pooling=false;database=DPMDB_S_PRODBACKUP;Pooling=false
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Registering DPM category
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding ConsiderOfflineMediaToCheckOffsiteReady to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Add job definitions
[2014-10-01 08:54:52 PM] Information : Creating schedules
[2014-10-01 08:55:00 PM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
from HRESULT: 0x800706BE)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
[2014-10-01 08:55:00 PM] * Exception : => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: DatabaseCreateFailed; 0; None
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: DatabaseCreateFailed; 0; None
[2014-10-01 08:55:02 PM] *** Error : The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
[2014-10-01 08:55:02 PM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
[2014-10-01 09:33:51 PM] Data : Error Code Web Link =
http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft System Center Data Protection Manager&ProdVer=4.1.3313.0&EvtID=811&EvtSrc=MSDPM&LCID=1033&P2wAppId=p2wMsdpmEE

Hi,
Check the SQL Agent account on the remote SQL server and make sure the user account syntax is in the form of UserName\DomainName and not UserName@DomainName - if it is change it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Bug: Unable to backup a VM with the same name as an old VM

Scenario:
You have a VM called "Virtual Machine 1" running on a Windows Server 2012 R2 Hyper-V cluster and you backup this virtual machine using DPM 2012 R2.
You remove "Virtual Machine 1" from DPM, selecting delete replicas and expire all tape backups, and then delete the VM from the cluster as it is no longer required.
Later you create a new virtual machine called "Virtual Machine 1" on the same cluster. You attempt to backup the VM with DPM however when attempting to add the VM to a protection group you get the error "DPM cannot access the path \Online\Virtual
Machine 1 because part of the path has been deleted or renamed. Check the path and enter it again". Refreshing the data source/clearing the cache doesn't help
The only solution I could find that worked was to delete the data source record in DPMDB..tbl_IM_DataSource for the virtual machine. This also required deleting records that referenced the DataSourceId in other tables.

Hi
yo need to clear the Cache on the ProtectionGroup Wizard.
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Some free tapes are not used by backup job - dpm 2012 r2

Hi,
I have DPM 2012 R2 with IBM TotalStorage 3572 tape library. It is 8 slot tape library. All was working with initial 8 tapes I added to tape library. I had one Protection group to be archived on 8 tapes. I was doing Daily and weekly backups. Every 2nd week
I would do a weekly backup and keep it for 2 weeks i.e. I need 2 tapes for weekly backups. All was working ok until I introduced two new weekly tapes as a replacement for 2 weekly tapes in library. Because of disaster recovery procedure - I have to take
weekly tapes out of library and store them in disaster recovery location for some time. So I pulled out 2 weekly tapes and added 2 new tapes. New tapes were marked free and they are showing as Free tapes.
Now - the trouble is that these 2 free tapes are not used by backup job and instead - backup job writes weekly backup on any of the available Daily tapes (like from 4-5 days ago) instead of using one of the Free tapes that are available.
I'd like the backup job (Protection group) to use Free tapes first and only if there are no available free tapes - to go and do backup on Daily tape or ask for a free tape.
I am probably doing something wrong here - so I would really appriciate if anyone can help me with this? Any ideas?
Thanks,
Damir.
D.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 journal wrap error

Similar Messages

Maybe you are looking for