DPM 2012 R2 Long Term not backing up on correct day

Howdy,
I have created a Protection group w/both short and long term protections. The short term backup is to disk, Monday through Thursday, and the long term backup up is on Fridays to tape. (See images below) Seems simple enough, however for some reason the long
term Friday shows up on Thursday the same time the the short term backups are run. I didn't know that was possibly, but more importantly why is this happening?
I've done as much research as I can do on the web, I'm hoping someone here can weigh in. Thanks in advance.

Hi Janaka,
This is by design, all Long term tape backups are taken from the last successful disk based backup. In your case, your last disk based backup is Thursday, and no data has changed since then, so DPM will mount Thursdays disk based recovery point and
copy it to tape and the time of the recovery point will be the same as Thursday since the version of the data is exactly the same.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

DPM 2012 SP1 long term backup fails when protected server reboots

Hi,
we're using DPM 2012 SP1 with Short-term and long-term protection.
We use a daily short-term backup to disk and a weekly long-term to tape.
We are noticing that when a long-term tape backup is running, it fails when we reboot one of the protected servers.
Is anyone else having this issue ? I assumed the long-term tape backup will be created from a disk-recovery point.

Hi,
What is the detailed error code in the properties of the failed initial replica or consistency check job ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 catalog failing, not all database items are available for restore

I recently started protecting my SharePoint 2013 site using DPM 2012 R2. I was able to get item level recovery working, but not all of the database items are showing in the recovery section. I go get the warning "DPM failed to gather item
level catalog for 1 database(s) of the SharePoint Farm Some of the recovery points for these databases in the farm would be associated with an earlier successful catalog. (ID 3133)"
I have looked on the SharePoint front end web server in the WssCmdletsWrapperCurr log file and I do not see any exception there.
It it is strange because I do get the option to restore some items, just not all of them. Any help would be greatly appreciated.

Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 long backup to tape job randomly fail after installing SCCM 2012 Client

Hello,
I'm managing a two nodes 2012 R2 file server cluster that contains a 16To CSV. I'm using DPM 2012 R2 to backup this entire shared volume directly to LTO 4 tapes, the job last about 55h.
Since SCCM 2012 client has been installed(I don't manage it), the tape jobs are failing ramdomly after several hours with the error:
Type: Tape backup
Status: Failed
Description: The DPM service was unable to communicate with the protection agent on serverX.xxxx.xxx . (ID 52 Details: The semaphore timeout period has expired (0x80070079))
More information
End time: 19/07/2014 03:11:06
Start time: 18/07/2014 22:00:00
Time elapsed: 05:11:05
Data transferred: 768 289,56 MB
Cluster node serverX.xxxx.xxx
Source details: G:\
Protection group members: 1
Details
Protection group: File Server Tape Protection
Library: Quantum PX500 Series Medium Changer
Tape Label (Barcode): File Server Tape Protection-00000230 (000043L4)
If I uninstall SCCM 2012 client, no more issue, backups succeed. I've asked our SCCM team, no specific task has been scheduled or deployed in SCCM.
I can't see anything abnormal in logs.
Any idea?

I have disabled "Configuration Manager Maintenance" and I have also tried to set the registry value HKLM\Software\Microsoft\CCM\CcmEval\NotifyOnly to TRUE and still the same issue.
I can't find any correlated errors in the Windows event logs, task scheduler history neither in the DPM logs.
I've increased the log level of DPM by following the following procedure
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/how-to-collect-dpm-verbose-logs.aspx
Now i'm suspecting the maintenance job of Windows 2012 R2, i'll try to disabled this task. But the fact is that I don't have this backup issue if SCCM 2012 client is not installed.
I'm waiting for next logs and will keep you informed

My MacBook Pro is currently online via wifi, but the airport utility doesn't recognize the airport time capsule base station and has not backed up in 10 days

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

I currently have an iPhone 5, 16gb. I Do Not want to Loose any photos or albums by deleting them from my phone and not backing them up correctly. My iCloud backup is only storing my "Photo Stream" and I can not locate them in iTunes after I sync/Back up.

I currently have an iPhone 5, 16gb. My storage is almost full on my phone. There are only 80 mg available. I am new to icloud and also have always had trouble navigating around iTunes. (Even after endlessly reading through support and help topics as well as calling) My concern is about Not Losing any of my photos if I delete them from my phone. I have to delete a large portion of my camera roll as well as the Album Folders I have created. Although it would be great if there was a way to just keep my albums still. I have already backed them up to an external hard-drive, my computer and a geek stick. I'm not trying to be too paranoid about these photos, but, they are all of my 3 children. There are over 4000 pictures stored on my phone. Some photos go back as far as 2009. Can you offer any information about backing up my Camera Roll, not just "Photo Stream", and albums I've created On my phone? I read that it's good to back photos up on both iTunes as well as icloud. I even purchased extra icloud storage to back them all up. I do regularly back up/sync, my phone to my computers. However, I cannot even locate where they are stored on iTunes, let alone look at them. And as far as my iCloud backup, it only stores the new pictures from "Photo Stream". Please offer any advice you may have. I do not use up a lot of storage on my phone other than Photos and Contacts (it's a work phone). I would definitely be able to sleep better knowing my children can one day see these pictures of themselves. I appreciate your time. Thank you,

First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have?

Photo library is not backing up when icloud backs up

MY iPad Air 8.1.1 and my iPhone 5s 8.1.1 both give me a message saying, " icloud photo library has not backed up in 16 days. Connect to wifi and backup." iCloud backs up daily. Why are my photos not included in this backup. I have iCloud Drive turned on. Should I turn it off? Help!

Try deleting your existing backup and backing up again. An inability to back up to iCloud can be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt. Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

DPM 2012 - stand alone drive - Short/Long term protection to tape

We are migrating from BE to DPM 2012. I'm trying to configure DPM 2012 for both short term & long term protection - both using tape (stand alone drive). The goal is:
Daily backups (Mon, Tue, Wed, Thu) - 2 weeks retention
Weekly backup (Friday) - 4 weeks retention
Monthly backup (last weekly backup) on every month - 15 m onths retention
I've configured the short term protection for daily and weekly backups. Monthly backups are configured under long term protection. Daily and weekly backups are working as expected. However when it comes time for the Monthly, the DataSet copy jobs are failing.
As I understand it, DPM is expecting another drive to copy the weekly backup tape.
How I can achieve above goals ? Backup to disk is not an option.

Hi,
Any time DPM schedules a dataset copy job, you will need more than one tape drive, there is no way around that requirement.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2010 Short and Long Term goals

My question is related to size restrictions.
Our existing DPM 2010 is setup with two protections groups, System State, and a Default (file) protection group. Both are set up the same. A co worker recently had to re-create a protection group due to his negligence and deleted it without looking at how
it was setup in the first place, since then I've been having errors in backing up to tape:
Synchronization frequency is set to just before recovery point
Short term goals are:
Recovery points are at 8:00 AM, 12:00PM, 6:00PM Everyday, Express Full is 8:00PM Everyday
Long term goals are:
Retention range 2 weeks, Frequency Weekly (1 recovery point every 1 week for the last 2 weeks)
Full backups are set to Saturday at 11:00 PM
Here's the thing, we have 3x3TB external drives that, historically have been swapped out weekly (Monday mornings, using Firestreamer for tape emulation). Since the co-worker broke, and re-created the protection groups, when we view DPM Console on Monday
morning, we see that the backup jobs are failing, the 3TB drive is full.
Could this 3TB drive be full due to this weekly swapping out when it is set to a retention range of 2 weeks? Obviously, it could be because the protection group actually contains that much data, but I'm trying to wrap my head around sync frequency, recovery
points and how that works into recovery goals.
Any help is appreciated.

Hi,
Right. After the registry key is added, all new recovery points written to tape will show they expire at midnight (12:00am) on they day they expire so any tape jobs that run later that day will be able to use that tape after the expiry
date.
To prevent tape jobs from failing because there are no tapes available, you can also add this registry value.
During a new tape backup or if a tape becomes full and there are no other tapes marked free, Free (contains data) or expired in the library, DPM will raise an alert to prompt for another free tape to continue backup. The same is true during a
restore, if the needed tape is not in the library an alert will be raised. By Default, DPM It will wait for
1 hour before failing the job.
This prompting timeout can be configured by the registry entry “PromptingTimeOut” under “HKLM\Software\Microsoft\Microsoft Data Protection Manager\1.0\Prompting”
PromptingTimeOut:REG_Dword:43200000 (dec) = 12hrs
The Formula is (#hrs * 1000 * 60 * 60)
1HR = 1*1000*60*60 = 3600000 decimal
So for each hour to wait, multiply by 3600000.
8hrs = 28800000 decimal
Restart the DPMRA service.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

TS3694 Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad. iTunes says "could not back up ... because a session could not be started". I'm on w7x64, updated.

Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad.
For all devices, iTunes says "could not back up ... because a session could not be started".
I'm on w7x64, updated.
I have already tried to re-install, reboot, stop/restart Apple mobile devices service, without success.
Thanks!

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Hi I want to buy an unlocked iPhone 5in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.

Hi I want to buy an unlocked iPhone 5 in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.
Thank you

Apple Online Store sells unlocked iPhone in the following countries: Australia, Austria, Belgium (French, Dutch), Brazil, Canada (English, French), China, Czech Republic, Denmark, Finland, France, Germany, Hong Kong (English, Chinese), Hungary, Ireland, Italy, Luxembourg, Malaysia, Mexico, New Zealand, Netherlands, Norway, Poland, Portugal, Singapore, Spain, Sweden, Switzerland (French, German), Taiwan, Thailand, United Arab Emirates, United Kingdom, and United States.
You can probably be absolutely sure any other source will be carrier locked
It also appears that only Zain offer unlocking (of all the ME carriers ) in Jordan and Bahrain
A ME iPhone 5 ( A1429 GSM )will not work on US LTE when you return

Some free tapes are not used by backup job - dpm 2012 r2

Hi,
I have DPM 2012 R2 with IBM TotalStorage 3572 tape library. It is 8 slot tape library. All was working with initial 8 tapes I added to tape library. I had one Protection group to be archived on 8 tapes. I was doing Daily and weekly backups. Every 2nd week
I would do a weekly backup and keep it for 2 weeks i.e. I need 2 tapes for weekly backups. All was working ok until I introduced two new weekly tapes as a replacement for 2 weekly tapes in library. Because of disaster recovery procedure - I have to take
weekly tapes out of library and store them in disaster recovery location for some time. So I pulled out 2 weekly tapes and added 2 new tapes. New tapes were marked free and they are showing as Free tapes.
Now - the trouble is that these 2 free tapes are not used by backup job and instead - backup job writes weekly backup on any of the available Daily tapes (like from 4-5 days ago) instead of using one of the Free tapes that are available.
I'd like the backup job (Protection group) to use Free tapes first and only if there are no available free tapes - to go and do backup on Daily tape or ask for a free tape.
I am probably doing something wrong here - so I would really appriciate if anyone can help me with this? Any ideas?
Thanks,
Damir.
D.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

System Center DPM 2012 R2 Issue backing up Exchange 2010

I was previously using System Center DPM 2010 to back up an Exchange 2010 server without any issues. we recently upgraded to DPM 2012 R2 and I followed all of the steps to install it properly on the Exchange Server. However, DPM cannot see the Exchange DB correctly and it is not allowing it run the cleanup (eseutil.exe) on the Exchange Server, leading to space issues. What do I need to do to resolve this issue?
This topic first appeared in the Spiceworks Community

Hi,
This is a documentation error and will get it addressed. DPM 2012 R2 RTM does still support page file VHD exclusion same as DPM 2012 SP1.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How do I delete my old iPhone backup since I can not back up my new phone. Will I lose any pictures? Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up. Thanks, been trying to do this for a long time.

I want to delete my old iPhone backup since I can not back up my new phone. Will I lose any pictures? Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up. Thanks, been trying to do this for a long time.

Deleting the backup only permanently deletes the backup from iCloud. It doesn't do anything to the data currently in your account or on your devices. To delete it, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of the device that you want to delete the backup for, then tap Delete Backup.
You can't see anything in an iCloud backup, if that's want you're asking. You can only restore it to your device. You can, of course, see your other iCloud data.

DPM 2012 R2 Long Term not backing up on correct day

Similar Messages

Maybe you are looking for