DPM 2012 R2 Reporting Server locations
I' m just looking to see what is and what is and not supported for a DPM 2012 R2 Topology for the SSRS.
When using multiple DPM servers with SSRS installed locally on the DPM server. Does each SSRS instance need a separate ReportServerDB on a remote SQL server running the SQL DB Engine. Or can they report to the 1 ReportServer DB on the remote SQL server?
I know I can have each SSRS instance installed on each DPM server point to the same SQL Server but creating multiple ReportServer databases.
Thanks
Hi,
Single DPM server with SQL installed locally = SSRS is used locally.
Multiple DPM servers sharing a remote SQL server instance = SSRS will also be shared in same SQL instance.
Multiple DPM Servers sharing a clustered SQL Server instance = SSRS will need to be on separate non-clustered SQL Server. For each DPM server using the same standalone SQL Server instance - the SSRS will be shared.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?
Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session EndedHi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
Dear All,
Error while trying to access report server location. Illegel characters in path.
Report server location is:
How to fix this issue. Could you pls send me step by step
ThanksServer Name should give like
http://localhost:9704/xmlpserver
Thanks
Edited by: Raj on Feb 9, 2011 9:05 PM -
Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?
Hi,
Can DPM 2012 SP1 be installed onto Server 2012 R2? i.e. is it compatible and also is it supported by Microsoft?
If so are there any official documents or links provided by Microsoft for this installation scenario?
I would have installed DPM 2012 R2 onto Server 2012 R2 but this is not possible due to DPM 2012 R2 not supporting Server 2008 protected servers!
Thanks,
Microsoft PartnerHi,
DPM 2012 SP1 is not supported running on Windows server 2012 R2.
System requirements for System Center 2012 SP1 - DPM
http://technet.microsoft.com/en-us/library/jj651645.aspx
Can you tell me how many Windows 2008 servers you need to protect and what is preventing you from upgrading them to Windows 2008 R2 ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
MMC has stopped working dpm 2012 r2 reporting tab
Hi,
I have a dpm 2012 R2 server. But i can't open the reporting tab. When i try to open it, it crashes imidiatly with the following error:
Description:
AppName: mmc AppVer: 4.2.1205.0 ModName: mmc.exe
ModVer: 6.3.9600.16384 StackHash: 9EAE70C3
Problem signature:
Problem Event Name: DPMException
Application Name: mmc
Application Version: 4.2.1205.0
Module Name: mmc.exe
Module Version: 6.3.9600.16384
Exception Name: System.NullReferenceException
Exception Point: Microsoft.Internal.EnterpriseStorage.Dls.UI.ReportingPage.Reporting.RefreshListView
Other: 9EAE70C3
OS Version: 6.3.9600.2.0.0.400.8
Locale ID: 1043
I can succesfully browse to:
http://dpmservername/Reports_MSDPM2012
then i can click any report and they all work.
Does someone know how to solve this??
Thanks.Hi
If you update to the latest rollup for DPM R2 SP1 does it work? -
Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Josephi have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph -
Sharepoint 2013 and SSRS 2012 Integration - Report Server Content Types not displayed
Hello, Everyone:
I installed SSRS 2012 on our Sharepoint 2013 application server following the step-by-step instruction from the posting below:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Everything goes well after STEP 3 is completed.
I did see the reporting services started and SSRS service application created.
However, when I created a new site and tried to enable the predefined Reporting Services content types, I do not see the Shared data source (.rsds) files, report models (.smdl), and Report Builder report definition (.rdl) 3 types of files listed at
all.
Further more, when I go to the Provision Subscriptions and Alerts page, I keep getting a "SQL Server Agent state cannot be determined" error, even though the username and password provided is the admin user
for the database.
Any experience of what is wrong with the SSRS - Sharepoint integration? Please help!
TinaHello, Treavor:
Now that the content types problem is resolved, I need to come back to the
Provision Subscriptions and Alerts page.
I guess I'm a little confused about what is being asked for the Provision Subscriptions and Alerts page.
The user I provided on the Provision Subscriptions and Alerts page is my user-defined sysadmin role. And the page takes that.
When I downloaded the SQL script, it was trying to give the automatically generated user "sa-SPDevContentAppPo" permission.
Which user are we using to detect the SQL Server Agent?
Thanks again!
Tina -
About DPM 2012 R2 report settings
Hi Expert,
I
configure reporting
in
the status
report,
I click on
Schedule,
enter
E-mail and
click
OK,
error,
How to
solve？
Details please refer to the picture
Thanks in advance!Hi,
It could be caused if the Reporting Services Server account works improperly, such as password expired, locked etc.
The Reporting Services Service Account should be changed to run under a domain account.
Open Reporting Service Configuration Manager from Start Menu->SQL Server 2008->Configuration Tools.
Select the service account to be a domain account having permissions to send mail from SMTP server.
Note: You can also simply create a new domain admin account and use it for testing.
Set the SMTP settings from the DPM Administrator Console or the Reporting Service Configuration Manager.
Enter the SMTP server as SMTPHost.
Ensure that the account is the same as the service account.
Set the SQL Service to run under any domain account from SQL Server Configuration Manager
Open reporting configuration file. By default it will be at C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPM2010\Reporting Services\ReportServer\rsreportserver.config. Change the SMTP Authenticate tab to 2.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Excel rendering not correctly for SQL SERVER 2012 (and reporting server)
hi
I have a tablix that has a category, subcategory and total items column. The total items are grouped into subcategories which are in turn grouped into categories. When using the wizard we explicitly indicate that the subtotals and totals should NOT be displayed.
When displayed in SSRS on IE and we expand/collapse all the categories this works fine, however when we export these to an excel file using the export button we notice that the subcategories total is displayed with an empty cell when we toggle all the subcategories
under one category.
It seems that it used to be a SSRS2008 r2 problem but is that still the case for 2012 and what can I do to fix this?
help would be much appreciated.
thanks
eddy
eddy.aHi eddy,
Based on my test, I can reproduce the same issue in SSRS 2012. When exporting to Microsoft EXCEL, excel will add an extra row for each group, if we use the “=Sun(fields!column.value)” in the details row, then the extra row will display the total of this
group, if we use the fields!column.value in the details row, then the extra row will display the first value of this group.
Please refer to the work around to fix the issue: add an extra row to the bottom of the tablix, outside of the group below. Then, set the border style with “None” value of these text box.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/508823/reporting-services-2008-group-by-export-to-excel-duplicate-rows-csv-ok-pdf-ok
If the issue is persist, I recommend you that submit a feedback at
https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
DPM 2012 Replace secondary server
DPM
2012R2 UR 3
I had a secondary server die, and am trying to re-setup thee secondary server and
am running into problems
I am attempting to backup my 2 primary DPM servers (DPM1 and DPM2) with a 3rd DPM
server (DPM3).
I run in to 2 issues.
Through the console, i will install the agent on DPM1 and DPM2, and it says
it installed successfully. Then I will go and try to configure protection for that server:
It lists the server I "installed" the agent on, and shows it as a DPM server
However, when i expand the server to list the items to back up it throws an error
"DPM is unable to enumerate contents in 06eb093b9b0d43cebb20ad33fa7d83d3,
ect ect" It will allow me to backup the SQL server and the C
drive.
What I think is going on is that the agent is not being installed on the primary dpm
server (DPM1 and DPM2).
So I manually try to install the agent on DPM1 and I get another error that says
"Protection agent cannot be installed on machine where dpm is installed
DPM"on the DPM server I am trying to backup I get the following error in the Application log:
The description for Event ID 945 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Unable to connect to the DPM database because of a general database failure. Make sure that SQL Server is running and that it is configured correctly.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>9188</Seq><TimeCreated>10/30/2014 2:23:41 AM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlException</ExceptionType><ExceptionMessage>Invalid
object name '##017127d2_c270_4cd3_9ee0_5ddc0adabb88tmp_tbl_ProtectedPS'.</ExceptionMessage><ExceptionDetails>System.Data.SqlClient.SqlException (0x80131904): Invalid object name '##017127d2_c270_4cd3_9ee0_5ddc0adabb88tmp_tbl_ProtectedPS'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.AMServerInfo.GenerateProtectedPSServerIDs(SqlContext ctx)
at Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.ProtectedPSs.GeneratePSInfoXml(Object obj)</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table
NuttyBar -
SCOM 2012 R2 Reporting Services High Availability Configuration Setting
Can u guys tell me how I can make a scom 2012 r2 report server high availability configuration kindly share the steps or screen of it.
SCOM reporting feature is depend on SQL reporting and as a result you may refer to SQL reporting service high availability.
For detail, pls. refer
http://technet.microsoft.com/en-us/library/bb522745.aspx
http://www.mssqltips.com/sqlservertip/2335/scale-out-sql-server-2008-r2-reporting-services-farm-using-nlb-part-1/
http://www.mssqltips.com/sqlservertip/2336/scale-out-ssrs-r2-farm-using-windows-network-load-balancing-part-2/
http://technet.microsoft.com/en-us/library/hh882437.aspx
Roger -
SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid
Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support -
Reporting server installation issue
Hello,
I have a problem while installing SCOM 2012 R2 Reporting server. My configuration is as follows:
1) 3 servers - 1 database server on SQL 2012 Standard SP2 + 2 SCOM 2012 R2 Management servers
2) all servers on Windows 2012 R2 Standard
3) Windows Firewall is disabled on all servers
4) DB server + Reporting server is installed on SQL server
5) I am able to access SQL Reporting server URLs
6) Account I am using to install is local admin on SQL and SCOM management server and has public and sysadmin role in SQL
During the installation I got error messages below. Any idea?
[17:05:40]: Error: :ModifySRSServiceAccount failed.: Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BE, Exception.Message:
[17:05:40]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
String srsDBName)
[17:05:40]: Warn: :Message:SetSRSSecurity Exception Exception: . Will retry..
[17:05:40]: Debug: :Now Sleeping for : 60000 milliseconds
[17:06:40]: Debug: :More: 4 rety to go..Hi,
Did you install SCOM reporting on the SQL server which has SQL Reporting service running?
Have you followed the link below:
http://www.rickygao.com/step-by-step-installing-system-center-2012-r2-operation-manager/
In which step you got this error. How about changing another admin account to install the reporting server?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Recently I have updated a DPM 2012 SP1 standalone server to DPM 2012 R2. That it’s self was a challenge... Following the upgrade most of the protection groups required consistency checks. For some time I have been having problems performing these consistency
checks on remote servers over a 10Meg link.
On the DPM server I would kick off a ping to the remote host, then start a consistency check. Within a few seconds I would start to get dropped pings, and very large ping response times, 3000ms plus. Within 3 minutes the pings would time out completely and
no connections can be made to the remote server, RDP etc. However any other server on the network can connect to the remote client. Eventually the DPM jobs times out and sometime later the pings also return.
The resolution to this has taken some digging but this is what I have found. The DPM agent update does not seem to fully work and requires a reinstall. Here is my process:
Logon to remote client server
Install .net 4 (a raw install of the client requires this, may not be needed when done via DPM)
Via Add Remove Programs, remove DPM agent
Clean up Reg
Delete "HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager"
Delete "HKLM\System\CurrentControlSet\Services\DPM**" (However this key is not there for me)
Back onto DPM Server
Modified protection groups as required to remove all instances of the client server
Remove Agent for client server
Install agent via DPM (watch for the glitch right at the end where it does a failed, then succeed…)
REBOOT client server
Add back into protection group
Consistency check kicked off automatically
This seems to have fixed the issue.Hi,
The prerequisite required for DPM 2012 SP1 that must be installed is a re-rerelease of UR3 which is 4.1.3317.0 - please download and install the update specified.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.comUsing:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com
Maybe you are looking for
-
Uplugging Power - screen shuts off
Hi, Sometimes when I unplug the power chord on my MBP the screen goes blank (kinda flickers out). I can also hear a click when this happens. Is this normal behaviour?
-
My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time
-
Problems fecthing with xmltable using xmlnamespaces
Hi, I've the following XML save in a table in a XMLTYE field <ORU_R01 xmlns="urn:hl7-org:v2xml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <MSH> <MSH.1>|</MSH.1> <MSH.7> <TS.1>200804090000</TS.1> </MSH.7> </MSH> </ORU_RO1> When I've tried
-
I use java -Xmx128m -Xms64m my.Application to start my.Application with more than standard memory assigned. When I try the same in Forte, it doesn't work (Build -> SetArguments). But I remember, that it once worked, when I had an older Version of For
-
Does anyone know why my CVS directories are being blown away when I save .numbers files. I don't get the same problem with other applications like graffle, which also uses directories for files.. The best solution I have found so far is to use OnMyCo