DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail

Hi,
It could be a coincidence, but ever since installing Update rollup 4 onto DPM 2012 R2, (which was at UR3 I believe) I haven't been able to complete an Exchange express full backup or consistency check with verification using Eseutil checked. If I have the
eseutil check enabled I get the following error:
Type: Consistency check
Status: Failed
Description: Data consistency verification check failed for LOGS of Exchange Mailbox Database Mailbox Database 2011112513 on SERVER.xxx. (ID 30146 Details: The process cannot access the file because it is being used by another process (0x80070020))
Disabling the eseutil verification allows it to succeed, but I'm not happy to continue with that for too long.
I've had this running for many years and this is the first real issue with exchange, its a single stand alone exchange database.
Any ideas?
Thanks,
Andreas

Andreas,
the error is stating that something else has a handle to a file or files during the ESEUtil check. Typically this is AV. I have also seen where the Exchange limits are exceeded and that causes the issue.
Please ensure you have the DPM AV exclusions for the DPM server and I would advise the DPMRA.exe on the PS. You can also trying disabling or removing AV as a test.
DPM AV exclusions -
http://technet.microsoft.com/en-us/library/hh757911.aspx
You may also want to test using eseutil against the logs outside DPM and see if that fails with similar issue. Let us know. Thanks
Regards, A.Nadar, This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

Hi,
i have problem with Outlook Uses who have Full Access on other mailbox.
An authentication window pop up very time a user start Outlook.
If i remove the access everything is ok.
if i insert manual the mailbox everything is ok
The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
Before the update, was no issue.
i will appreciated any help
Thanks

Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Installing Update Rollup 7 for Exchange Server 2010 SP3

Hi,
I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
Thannks!
Wave~Chaser

Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks

Microsoft Exchange Server 2010 SP3 update to Update Rollup 8-v2 for Exchange Server 2010 SP3

i have Microsoft Exchange Server 2010 SP3 and i would like to update to Update Rollup 8-v2 for Exchange Server 2010 SP3.
what is the best way to do so?
my current env:
Name : xxxxxxxx
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, HubTransport
Site : domain/Configuration/Sites/xxx
Name : yyyyyyyy
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/yyy
Name : cccccccc
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/ccc
Name : dddddddd
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : ClientAccess
Site : domain/Configuration/Sites/ddd
Name : iiiiiiii
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/iii
thanks
Mayson

Consider referring to the articles below and that explains it all.
Install the Latest Update Rollup for Exchange 2010 - https://technet.microsoft.com/en-us/library/ff637981.aspx
Applying Service Pack and Rollup Updates on Exchange Server 2010 (Part 1) - http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/applying-service-pack-and-rollup-updates-exchange-server-2010-part1.html
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

No mail after roll up 4 for Exchange Server 2010 SP3 KB2905616

Hi
Exchange 2010 on SBS 2011.
After auto application of roll up 4 thee are no emails. Although all exchange services are running. Restarting server did no help. Running mail trouble shooter comes up with 'Server Does Not Support Secure Connections'. OWA is also not working with below
error;
Couldn't find a base theme (folder name=base)
Request
Url: https://remote.theicebox.com:443/owa/auth/error.aspx?url=https://remote.theicebox.com/OWA/&reason=0
OWA version: 14.3.174.1
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaThemeManagerInitializationException
Exception message: Couldn't find a base theme (folder name=base)
Call stack
Microsoft.Exchange.Clients.Owa.Core.ThemeManager.LoadThemeFiles()
Microsoft.Exchange.Clients.Owa.Core.OwaApplicationBase.ExecuteApplicationStart(Object sender, EventArgs e)
How can I solve this please?
Regards

Hi,
Thanks for your response.
It's great to hear the good news.
Best regards,
Amy
Amy Wang
TechNet Community Support

Uninstall Rollup 4 for Exchange Server 2010

When one of our CAS servers got patched they installed Rollup 4 for Exchange Server 2010 SP3.
Is it ok to unintall the Rollup 4 update? I am not able to update other servers for another month and I need all servers to have the same build.

Hi dirkbucket,
Yes you can go ahead and uninstall the rollup from the exchange server that got installed. This will not result any impact. Once uninstalled please perform complete reboot.
As uninstallation of patches is applicable till Exchange 2010 version on getting them reverted.
"To remove Update Rollup 3 for Exchange Server 2010 RTM, use Add or Remove Programs in
Control Panel. Then, remove update 981401."
Find the url for ref: http://support.microsoft.com/kb/981401/en-us
In Exchange 2013 you will not able to perform reverting of CU other than rebuilding it :(
Exchange Queries

Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
Can someone help me which update i can install after this, can i start with
Update Rollup 1 for Exchange Server 2010 SP1.
Many thanks in advance

My recommendation will be:
Remove update roll-up 5
Install SP1 check that everything is working
Install SP2 check that everything is working
Install SP3 check that everything is working
I think it will be risky for you to go straight to SP3.
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

Hello,
Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
http://www.microsoft.com/en-us/download/details.aspx?id=41394

(1) I had to roll it back:
The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors. It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem. Rolling
back the update and rebooting the server seemed to resolve the issue.
Issues reported before the general mailflow stopping for everyone:
Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
(2)
ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
When he tries to open an e-mail, he gets an error message.
If he tries to mark an e-mail unread, he gets a different message.
Thanks Ben

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

Cumulative Update 5 for Exchange Server 2013 (KB2936880)

Hi,
i have installed exchange server 2013 on separate servers, I deployed the Mailbox role on the first server, and the CAS role on the second server.
I checked the edition using the exchange management shell on the mailbox server and on the CAS server:
>>>
[PS] C:\Windows\system32>Get-ExchangeServer | fl name,edition,admindisplayversion
Name : EXMBX
Edition : Standard
AdminDisplayVersion : Version 15.0 (Build 516.32)
Name : EXCAS
Edition : Standard
AdminDisplayVersion : Version 15.0 (Build 516.32)
<<<
My question is, is it possible to update this current edition to the "Cumulative update 5 for Exchange Server 2013 (KB293688) ?
if it is, in my case, on which servers should i install this update ? on the Mailbox server ? or on the CAS server ?
i appreciate you fast response,
Thanks.

Hello,
It doesn't matter which build you choose: you should first update the mailbox role and then CAS. The best option is to have same version of all your Exchange servers (e.g. CU5).
It is not necessary to install Exchange binaries on DC.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

SBS 2011 - Update Rollup 6 for Exchange Server 2010 Service Pack 2

I wonder if I have to install this rollup, since the server is already up-to-date using Windows Update? The KB article (http://support.microsoft.com/kb/2746164/en-us) doesn't mention that.
In this article, under 'Prerequisites' it says you have to "remove all interim updates". What updates are they?
Simon

Firstly, I will do an introduction of interim update.
An interim update is a fix that resolves a problem that is considered critical to the functioning of Exchange. It is built specially for a particular service pack and Rollup. This means internally there could be loads of interim updates for a particular fix.
If you have multiple problems on a server that requires interim builds, you cannot just add a second interim build. You can only install one interim update per server. You have to get a combined interim build that included both fixes. Currently MS supports
up to 3 fixes in a combined IU. The good news is that interim builds can be seen in Add/Remove in the control panel so you do not end up checking file versions.
See more details in the following link: http://blogs.technet.com/b/mlines/archive/2008/12/30/interim-updates.aspx
That is to say, the interim update is different from Exchange Rollups
You don't have to unstall anything to apply this Roll Up. Rollup Updates are always important and should be applied. If you are running SP2 for exchange 2010 and if their a rollup available to install for exchange , my suggestion woiuld be to install as it
will keep your exchange server upto date.

Update Rollup 6/7 for Exchange Server 2010 SP2

Our config :
Version 14.2 (Build 247.5)
2 Mailbox servers (DAG), 2 CAS/HUB Servers using a NLB, 2 edge
my question is the following:
can i go directly to rullp 7 without installing 2,4, 5, 6 or I have to install all rollup ?
and what's the bests practices for installing rollup ?

Hello,
You can install rollup 7 directly without installing rollup 2,4, 5, 6.
You should install rollup 7 on your Exchange 2010 server roles in the following order: Client Access/ Hub Transport ,Mailbox and Edge Transport.
Please refer to the following article to install rollup 7 on CAS Array Members. (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does
not guarantee the accuracy of this information.)
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-cas-arrays/
Please refer to the following steps to install rollup 7 on Database Availability Group Members.
=============================================================
1. Run the StartDagServerMaintenance.ps1 script on the server being updated.
2. Install the update rollup .
3. Run the StopDagServerMaintenance.ps1 script .
4. Re-balance the DAG, as needed .
Here is the article for your reference.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Send As, Send on Behalf and Full Access for Exchange server 2010/2013

[This FAQ contains 2 parts]
Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
Common issue and Troubleshooting on the three permission.
[Testing and Watching]
Based on following blog, I decide to test on my lab:
Full Mailbox Access Rights + Send On Behalf = Send As ?
http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
Description on my lab and test:
Exchange 2010 + Outlook 2010
Exchange 2013 + Outlook 2013
Senders: A01, A02, … , A07, A08
Recipient: A09
A01 grand permission to other senders.
Two methods:
a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
Result as following forms:
1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
To A09.
2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
To A09.
[Common Issue]
1. [Issue]
Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Details as following pic:
[Troubleshooting]
1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
2. [Issue]
Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
Your message did not reach some or all of the intended recipients.
Subject: xxx
Sent: xx/xx/2014 8:20 AM
The following recipient(s) cannot be reached: A09
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Details as below:
[Troubleshooting]
1) Also check the Send As permission configuration first.
2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
\Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
5) Restart Outlook.
Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
From field.
3. [Issue]
Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
message is copied to the Sent Items folder of both A01 and A0x.
[Troubleshooting]
This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2632409/en-us
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
vs additional account defaults to different methods). Check the screenshot:
And please post this somewhere more visible, like blog/wiki page.

SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
Mailbox All Database Services - Default-First-Site-Name
Mailbox Database Service - Management - test.local
Mailbox Database Service - PublicFolders - test.local
Mailbox Database Service - Users - test.local
Mailbox Many Database Service - Default-First-Site-Name
OfflineAddressBook Service - Default-First-Site-Name
Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
log on Exchange server itself.

Hi There,
Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
Also is Agent proxy enabled ?
Also is the Action account of the Agents System or Domain account ?
Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
Gautam.75801

Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

Hi
Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange Active Manager Server instances are created.
Will any can tell me why i am not getting any instance for MSExchange Active Manager on Exchange Server 2010 SP1.
Thanks
Sandeep Gupta
Sandeep Gupta

We are getting the below error on HUB/CAS server past 4 days continuosly.
Event ID- 106
Source - MSExchange Common
Description -
Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
categoryName)
Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
Could some one help me on the same.
Above steps can be follow to avoid this error???
Thanks in Advance.

DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail

Similar Messages

Maybe you are looking for