DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

We have a DPM 2012 R2 Server with SQL Server 2012 installed locally.
We tried to install Rollup 4 for DPM 2012 R2 (KB3009516) using Windows Update
and it failed with error code 0x80070643. Now when we open the DPM Console
it is totally empty (no Protection Groups, Servers, Disks, just like a fresh install).
In the eventlog we get a lot of Errors and warnings:
Event 941 (MSDPM)
Unable to connect to the DPM database. Make sure that SQL Server is running and that it is configured correctly.
Cannot open database "DPMDB" requested by the login. The login failed.
Event 4209 (MSDPM)
The description for Event ID 4209 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM Writer encountered an internal error. Please restart the DPM Writer service, and then try the backup operation again. For additional troubleshooting information, review the application event log and the DPM Troubleshooting Guide.
Event 107 (Report Server Windows Service (MSSQLSERVER)
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event 274 (SQLISService110)
Microsoft SSIS Service:
Registry setting specifying configuration file does not exist.
Attempting to load default config file.
Then there are some Errors/warnings from SQLSERVERAGENT about failed scheduled Jobs.
I think the failed Installation changed some database Settings, so that now the DPM Console
cant access the database anymore.
I would be happy if someone can help me getting this Server working again!

Our biggest problem is, that the DPM is not working any more. So there is no chance to backup the SQL Server via DPM.
I think the main problem is that DPM have no access to the database. Every time I start the DPM Application, I get an error "verify that the DPM service is running on this computer". In the eventlog are many errors that the msdpm service was unable
to connect to DPM Database. Another "information" is that the user 'nt authority\system' failed to open the database of dpm.
We've tried to reinstall the DPM but its still the same problem. I suppose that is a corrupt database.
Tomorrow I try to restore the database and hope it will be the solution of our problem.

Similar Messages

Unable to Connect to Database (after server has been re-started)

Hi, I use Essbase Admin Services 7.1.3 and the server was not responding, therefore our IT guys re-started it. Since then I am unable to connect to one of the applications. I have tried to start/Stop the application but it just says "Application did not start". There are 6 databases in this application altogether (3 data and 2 Currency). The application has been there for about 3 years (it holds historic sales data) and there has never been any problems with it. When I tried to Start the application, in the message panel at the bottom it says "Error: 1013015 Unable to Connect to Database (2003)". It's as if there is a problem with this 2003 database but the 2002 and 2004 database are OK. Has anyone ever had this problem and knows how to rectify it?? Thanks in advance. Sarah

It may be that the server restart corrupted the database. Go into database properties and uncheck the box start database with application and then try to restart the application. You can try database validation, or simply reload the database from backup. But you can get the application up and the rest of the databases up by decoupling the database restart from the application start. There will be a .xcp log file in your application directory (and possibly your database directory.) These might help Hyperion Support in identifying the cause of the problem. But the quickest solution would be to reload the database from backup. The serer and application logs can also provide help in identifying the problem. One of the keys is to determine why the server is not responding before restarting the server. It may be that a single application is the source of problem. Typical causes are unscheduled free space restructures, application loads of large databases, and an occasional rogue process. Rather than rebooting the entire box, or even restarting the Essbase server, the safest approach is to only kill the job that is soaking up the cpu cycles, causing the server to be unresponsive. This requires identifying the offending process (esssvr.exe) and killingit. Often that restores the rest of the system to operations, giving you time to focus onthe offending application. You learn thses things when you are pushing the server to its limits (or beyond). If it happens often, you need to do a serious performance audit of teh server and determine whether you need more power and/or memory. And in any case, you are less likely to encounter this sort of problem in the future if you try to limit applications to a single database. This will allow a better utilization of system resources. And also, it's a good idea to shut down applications that you are not going to be using for a while. Every loaded app takes system resources whether or not it is doing anything. So review your list of apps that start on startup and consider unloading apps after completing batch processing. Sorry about the long lecture, but I speak from somewhat painful experience. I hope that this will help you.

DPM 2012 SP1: Unable to connect to the DPM DB, because the DB is inconsistent state.

We are getting the following error when we try to recover from a specific server ( Recovery Tab | Domain | File Server )
Unable to connect to the DPM Database because the database is in an inconsistent state. (ID943)
=> There are no double entries for the specific server in the database. Verified by the following query:
select servername, domainname from dbo.tbl_AM_Server order by servername
=> DBCC Check DPMDB results in no errors.
=> Yesterday we used the following script to remove a ghost tape from our reports. The tape belongs to the PG where the File Server is member of.
http://social.technet.microsoft.com/Forums/en-US/a654c323-7b48-4ab5-8812-850115d9e430/dpm-2012-ghost-tapes-in-weekly-report?forum=dpmtapebackuprecovery
Is there a relation between our error and the removal of the ghost tape? Any idea how to fix this?

Hi,
I have not heard of that script causing any problems in the past, so may or may not be related. What are the details of the msdpm service crash found in the msdpmcurr.errlog after the error ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Unable to create protection groups after Cluster Migration

Hi Team
we have an issue relating to DPM 2012 R2. In our environment we have a Hyper-V Cluster and we recently did a Cluster Migration since Hyper-V Cluster was upgraded to Windows Server 2012 R2.
Before the upgrade, Windows Server 2008 R2 Cluster was protected by DPM Environment. After we upgraded we are unable to Create new protection Groups existing the new cluster and when we select VMs it's not showing up any members.
Please let us know how we can solve this issue since the Cluster Nodes and the Cluster Name is different from previous Cluster, we were expecting that DPM would allow us to create new Protection Groups while preserving old protection groups for recovery later
if needed.

Hi,
you need to stop the Protection of the old HyperV Datasources
Clear the Cache of the Protectiongroup,
and read the new VM to Protectiongroup
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Unable to connect to database after htmldb install

Let me clarify:
I am using 10g (10.2.0.1.0)
I just installed Application Server 10.1.3.0.0
I two database instances one being the original I created on initial install of 10g.
One additional database I wanted to use for the HTMLDB application.
I successfully installed and can connect to the application server on http://myserver:7777/em
And I can connect to the OEM for the database on http://myserver:5500/em.
When I tried to login via command prompt to install the HTMLDB tools I get the following error.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
I have checked my tnsnames.ora, listen.or and sqlnet files. They all appear to be correct.
I can even login through the net manager.

You don't tell us the OS (what always is useful), but if it is Windows, a new installation changes the default ORACLE_HOME. Now Oracle searches in <NEW_ORACLE_HOME>\network\admin (in your case the new home is HTMLDB's home) for its net configuration files. You could copy the configuration files from the old location or set TNS_ADMIN to <OLD_ORACLE_HOME>\network\admin.
Werner

Unable to connect to database after migration from oracle 8 to 9i

Hi,
Our applications database was migrated from oracle 8 to oracle9i, The oracle_home path was updated to the newer version.
While accessing the databese using the new setup we are facing SQLLIB mismatch problem
the description of error is as follows
=======================================================
SQL-02107 Program too old for runtime library; please re-precompile it
Cause: Your program was precompiled by an older version of the Oracle Precompilers, which is incompatible with this release of SQLLIB.
Action: Precompile the program with a newer version of the Oracle Precompilers
=========================================================
Please help in this regard
~akhil

Hi Akhil,
Looks like some Tuxedo services are using Pro*C code. Therefore, you would need to recompile your Pro*C code using the newer compiler and then rebuild the Tuxedo servers.
HTH,
Ravi...
Hi,
Our applications database was migrated from oracle 8
to oracle9i, The oracle_home path was updated to the
newer version.
While accessing the databese using the new setup we
are facing SQLLIB mismatch problem
the description of error is as follows
======================================================
=
SQL-02107 Program too old for runtime library; please
re-precompile it
Cause: Your program was precompiled by an older
version of the Oracle Precompilers, which is
incompatible with this release of SQLLIB.
Action: Precompile the program with a newer version
of the Oracle Precompilers
======================================================
===
Please help in this regard
~akhil

Unable to connect to N80, after I update Nokia PC ...

Hi all, Today, I updated the Nokia PC suite to version 6.82.22.0. After this, I am no more able to connect to my Nokia Phone. Please help. regards, rv

13-Feb-2007
12:04 PM
patc wrote:
Try a search - this question gets answered every other day .. possibly even more often. You need to: - uninstall all Nokia software via Control Panel - PC Suite - Nokia cable drivers - a.n.other Nokia software - (optionally) run the cleanup tool - (optionally) clean up the registry with regedit - (optionally) remove all Nokia-related directories - download & install the latest version of PC Suite Should fix it.
Excellent. It works after I 'repair' from the control panel. ThanQ very much. best regards, rv

IPod touch won't connect to computer after failed update?????

A few days ago, I had received a new cable to update my iPod touch from Amazon. This cable is not made by Apple. I have had two cables in the past from Apple, one that came with my 1st Generation Nano and one that came with my iPod touch. The former cable is the older version of the cable, while the latter is the newer version. A year ago the newer cable that came with the iPod touch broke. So I bought a new one from Apple. Then that one broke in June. Because I did not want to spend any money on a new one, I just used my old cable. It worked for a while until it stopped functioning. I have not updated my iPod touch until recently when I had purchased this new cable (which looks like the older version of the cable). It had updated my sister's 4 year old Video iPod and my 1st generation Nano. When I had plugged in my iPod touch with this new cable, my Compaq Presario V6000 laptop said it was syncing the iPod. But on the iPod screen it was saying the opposite. It was allowing me to use my iPod while Syncing it. Recently it has been doing that, when this iPod was brand new it was saying syncing, cancel to unsync. Now here is where the problem with my iPod has occured. So on the sync page on iTunes it said that there was a new update ready for my iPod. So I clicked update and allowed iTunes to download the software, extract the old software, and back it up. But in the middle of backing it up, it said my iPod was disconnected from my computer. When it was clearly connected to my laptop. I unconnected my iPod and reconnected. Now it said it was connected. It said I had to restore my iPod to its original settings and while it was doing so, it said that my iPod had disconnected again, while it was clearly plugged into the computer. Now my iPod won't even update at all. And every time I press the hold button it shows the symbol for itunes and the cable, meaning that I should be connecting to itunes, even though it is hooked up to the computer but not being recognized. The cable works though, because right after this I had updated my Nano to see if the cable was broken. I forgot to mention that similar problems with connecting and disconnecting occurred with the other plugs to, but not to this extent. Can anybody please help me solve this problem? Could it be the cord? My ipod? My laptop(I would say that it is my laptop's fault, seeing that it is a piece of garbage. But I tried connecting my iPod to my sister's macbook pro and it did not work either)? Would you recommend me to just bring my ipod, the new cable, and my laptop to the Genius Bar at the Apple Store and ask them in person??
*Sorry if some of the wording does not make sense. If you need any other information ask me. I want this solved as soon as possible.*

Could there be a problem that is happening to my ipod right now that is not associated with a usb cable problem? I want to avoid buying a new cable until I eliminate all other problems that I could have. If it is not a cable problem I don't want to spend money on something that is not necessary at the moment.
By the way, by following your advice with my current cable, iTunes recognized my iPod, and said you must restore this iPod before you can use it with iTunes. I clicked on restore. It extracted the software and once that was done it said Preparing iPod for restoring. It started to do it but then it said "The iPod "iPod" could not be restored. An unknown error occurred (13)."

Server Error in '/' Application. [COMException (0x81020024): Unable to connect to database]

Hi,
My team and I are trying to resolve this issue. some of our users are having trouble uploading data into the database. this is the error that they are getting.
I would really appreciate it if you could help me get ridd fo this issue.
Server Error in '/' Application.
Unable to connect to database. Check database connection information and make sure the database server is running.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.Runtime.InteropServices.COMException: Unable to connect to database. Check database connection information and make sure the database server is running.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[COMException (0x81020024): Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequestInternalClass.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId,
String bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +0
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +359
[SPException: Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +479
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +666
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +548
   Microsoft.SharePoint.SPWeb.EnsureSPRequest() +75
   Microsoft.SharePoint.SPWeb.get_Request() +74
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +613
   Microsoft.SharePoint.WebControls.SPControl.GetContextWeb(HttpContext context) +41
   Microsoft.SharePoint.SPContext.get_Current() +123
   CKS.EBE.BlogContext.get_BlogEnabledSite() +37
   CKS.EBE.BlogHttpModule._app_PostAuthorizeRequest(Object sender, EventArgs e) +113
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
the description of the error on the server is as follows:
The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use
the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database MOSS_Content_RBI on BartDB\Bart. Check the database connection information
and make sure that the database server is running..

are you using the Aliases for the SQL Server, make sure your account having the correct permission.
If it is your QA farm, you can run the config wizard to fix his problem...
check this post having the similar issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/478d6b3a-a51e-48c5-832b-5afb51c69734/unable-to-connect-to-the-sql-content-database-from-sharepoint-web-front-server?forum=sharepointadminlegacy
http://hammad1.wordpress.com/2008/06/04/unable-to-connect-to-database-in-event-logs/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Unable to connect to database server : MDM 7.1

Hello All,
I installed MDM 7.1 and I am unable to create/mount/unarchieve repository : Error message I am getting is :
Unable to connect to Database
I installed MSDE : Light version of SQL server... On command prompt I used: setup.exe sapwd=abcd SECURITYMODE=SQL
Its an mixed mode..
Dont know MSDE is okey to use for MDM 7.1? Any one faced such issue?
Thanks in advance
Rajeev

Hi,
Did you install Oracle client on MDM server. If not please install it and revert with the result..
Please check SAP Note 1350635 - "Problem connecting to database from MDM console" & Note 1363797 -" Oracle connection problem".. Kindly also check the log in MDM console and revert with the result.
Also, Please check Configurations Settings as mention in [MDM installation Document|https://websmp209.sap-ag.de/~sapidb/011000358700001668492008E] from Page no 42 to 45.
Check it and revert with your findings.
Regards,
Shiv

Unable to connect to database in ofline mode

Hi ,
i have server OBIEE server installed in Linux and client installed on windows7
the issue is
when i log in to admin tool on client it opens and show all tables but..
..... when i right click a table and click on view data .. it through an error 'UNABLE TO CONNECT TO DATABASE"
I HAD CHECKED THE TNS NAME S EVERY THING IS FINE
can any help in this regard

Hi,
which DB are you using? if u r using Oracle DB refer the below steps and make sure u r end
There are 3 options to work around this
1. Copy your tnsnames.ora to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory (only the former is needed as that is the ORACLE_HOME)
2. Or instead of tnsnames.ora source entry, use the full expanded tnsnames as shown below
(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.66.173)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = orcl)))
3) easy to connect u r DB
To configure OCI, you have to provide in the connection pool of the physical layer three parameters:
the call interface. You must choose OCI.
The data source name
The user name and password
In the data source name, you have to enter a connect identifier that can be one of the following naming methods.
//database_host[:port]/service_name
for more :
http://gerardnico.com/wiki/dat/obiee/oci
Thanks
Deva

I'm unable to connect to database thru cold fusion

I'm unable to connect to database thru cold fusion. it
sometiems give me an error that your uname is undefined , soemtimes
it gives ur index page not found so i created index page also but
still im unable to connect to database n update my records..plz
help me out..im a fresher in cold fusion

I am having a similar problem having CFMX 7.02 verify my SQL
Server 2005 Data Sources.
I am using the sa account for CF to access the db's. But i
get the following error:
Connection verification failed for data source: myDatabase
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
Every role in SQL Server has the sa grantor Grant enabled. I
can also login to SQL Server with the sa account w/o a hitch.
I don't know what else to do. The server information is set
to the ServerName port 1433, datasource name and database name are
the same as the database name in sql server, and the username and
password are set for the sa account.
Thanks!

RC-40201: Unable to connect to Database

I am trying to run
perl adclonectx.pl migrate
on new linux server, I am getting error, I tried with some action metalink notes, but no luck,
DB is up and runnin and listener is up and running,
what else i need to check, i am not sure, i have created SR, but i have not got good action plan,
Initializing the Apps Service Context variable Hash
DEBUG: Apps Service Status context variable extracted from the given Apps context file
s_apcstatus
s_apc_restrict_status
s_apcstatus_pls
s_tnsstatus
s_tcfstatus
s_concstatus
s_formsstatus
s_reptstatus
s_metcstatus
s_metsstatus
s_icsmstatus
s_jtffsstatus
s_icxblkstatus
s_discostatus
s_mwastatus
PROMPT :
Does the target system have more than one application tier server node (y/n) [y] ?
ANSWER :
y
PROMPT :
Does the target system application tier utilize multiple domain names (y/n) [n] ?
ANSWER :
n
PROMPT :
Default value found for s_tools_oh : /tmp/
Default value found for s_weboh_oh : /tmp/
PROMPT :
Do you want to preserve the Display set to dbora12:1.0 (y/n) [y] ?
ANSWER :
n
PROMPT :
Location of the JDK on the target system [opt/java1.5]
ANSWER :
/usr/java/jdk1.5.0_21
StackTrace:
java.lang.Exception: Cant connect to database using DBUtil
at oracle.apps.ad.context.CloneContext.checkDatabaseConnection(CloneContext.java:5694)
at oracle.apps.ad.context.CloneContext.promptForPortPool(CloneContext.java:5376)
at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:637)
at oracle.apps.ad.context.CloneContext.main(CloneContext.java:6228)
RC-40201: Unable to connect to Database OFMSREGT.

Danny,
Please mention the application release and the OS.
Do you have proper entry in the hosts file? Can you connect to the database remotely?
Do you have the latest AutoConfig (Rapid Clone) patches applied?
Please see if these docs help.
Note: 273477.1 - Running Perl Adcfgclone.Pl Appstier Gives Error
Note: 421148.1 - Jdbc Errors Cloning Apps Tier
Note: 271250.1 - Adcfgclone.pl tier apps Errors with RC-40201: Unable to connect to Database
Note: 392989.1 - Oam Cloning Preclone while Failed trying to connect to the target DB
Regards,
Hussein

Upgrade SBO-COMMOM SQL - unable to connect to database

Dear Experts,
I'm trying to upgarde from SAP 2007 A PL-42 to PL-49.
I have currently got SQL2000 (for legend system) running under the instance name SERVER and i have installed SQL2005 (SAP uses this) with the instance name SERVER\SQL2005, both running on the same machine called SERVER.
When i try to upgrade the SBO-COMMON database, it installs the DI and reaches a point where it asks for:-
Database Server:-              (I input SERVER\SQL2005)
Database Name:-              (SBO-COMMON)
User Name:-                     (sa)
Password:-                      (password)
When i click the NEXT button, i get the error "unable to connect to database; verify that database TCP/IP port serice is started."
I have verified that the TCP/IP ie enabled,and running on port 1433.
Addidtional Information:
During installation, it tries to access c:\windows\system32\sqljdbc_auth.dll file, when i click the NEXT button, just before i get the TCP/IP error.
Would highly appreciate the help.
Regards,
Asif

Dear Asif,
You may check these threads first:
Re: Unable to connect after migrating from SQL Server 2000 to SQL Server 2005
Re: Installing SBO 2007 Error Unable to connect to database
Thanks,
Gordon

MDM 71 - mdm console and clix - unable to connect to database server

Hi,
environment, MDM 7.1, AIX 6, Oracle 10.2.0.4 (installed as part of a standalone java AS)
i've an issue. I have installed MDM 71 via sapinst, before that I installed a standalone java application server. During the installation, i gave the 'oracle client', 'oracle home' and 'oracle sqlplus utility' to be those of the oracle database installed for the java AS.
After sapinst completed I tested my connection to the database via
tnsping <SID> = OK
sqlplus system/passwd@<SID> = OK
When i start up the mdm console (7.1.02.90) i can mount the MDM server, BUT when I try to configure the database settings i get
error 'unable to connect to database server'
I get the same error when i use clix dblist
Error: 0x84020004, Unable to connect with Database Server
Has anybody got any ideas.

To see why the MDM is not able to connect to database, do the following:
% cd /usr/sap/<SID>/MDSxx/log
% ls -ltr
You will find last updated log file with name like MDS_LogXXUX101224X164953.csv
% tail -100 MDS_LogXXUX101224X164953.csv
You will see the reason for not being able to connect. If the reason is:
",MDSAdminServerXGetAvailableReps,Oracle_DBConnection.cpp,205,,,,server_user,server_global,,,
2011-09-23T06:10:48.933,6 ,24,"Service 'SID', Schema 'system', ERROR CODE=12154 ||| ORA-12154: TNS:could not resolve the connect identifier specified
OCI Attach, try again ...
Then edit the /oracle/SID/112_64/network/admin/tnsnames.ora with entry like following:
SID.WORLD =
(DESCRIPTION =
 (ADDRESS_LIST =
 (ADDRESS =
 (COMMUNITY = SAP.WORLD)
 (PROTOCOL = TCP)
 (HOST = hostname)
 (PORT = PORT_NO)
 (CONNECT_DATA =
 (SID = SID)
 (GLOBAL_NAME = SID.WORLD)
then issue:
tnsping SID
If result is like
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = hostname) (PORT = PORT_NO))) (CONNECT_DATA = (SID = SID) (GLOBAL_NAME = SID.WORLD)))
OK (0 msec)

DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

Similar Messages

Maybe you are looking for