DPM 2012 SP1 - Protecting Exchange 2010 and Exchange 2013 at the same time
Hi,
From which Exchange Server am I commited to copy the ESEUTIL.exe and ESE.dll to the DPM Directory for protecting the whole Exchange databases from both products (2010 and 2013) ?
Thanks for replies.
Regards
Phil
The visual c++ libraries actually need to be installed on the Exchange 2013 server.
To protect Exchange 2013 with DPM SP1, in addition to copying the ese.dll
and eseutil.exe files to the DPM
bin folder, you also need to install the
Visual C++ redistributable for Visual Studio 2012 Update 1(vcredist) on your Exchange server. You can download it from
http://www.microsoft.com/en-us/download/ details.aspx?id=30679
Installing vcredist on your Exchange server loads components of Visual C++ libraries. The Visual C++ libraries are needed when an application that was developed using Visual Studio 2012
is installed on a computer that does not have Visual Studio 2012 installed. Without Visual Studio 2012 or the Visual C++ libraries, you will run into errors trying to protect Exchange 2013.
Let us know if it works after doing this.
NOTE: The Exchange 2013 ese.dll and eseutil.exe files will cover Exchange 2010 also.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!
Similar Messages
-
Problem connecting Firewire device and external HD at the same time
Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.
-
How can I connect to Oracle and SQL server at the same time?
I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH -
Go to detail page and update record at the same time
Hi guys,
I`m very new to dreamweaver and have no coding skills, so
please be gentle.
I`m have created a mail box and it all works fine, the
problem i`m having is that I want to be able to tag wether a
message has been read or not.
So the subject has to be a link so when someone clicks the
subject you are redirected to the read message page and it displays
the message in full.
My question is there a way to go to detail page and update
record at the same time?
I`m using ASP and the mysql read or not field is a SET"mrmidjam" <[email protected]> wrote in
message
news:fghrpf$7s2$[email protected]..
> Hi guys,
>
> I`m very new to dreamweaver and have no coding skills,
so please be
> gentle.
>
> I`m have created a mail box and it all works fine, the
problem i`m having
> is
> that I want to be able to tag wether a message has been
read or not.
>
> So the subject has to be a link so when someone clicks
the subject you are
> redirected to the read message page and it displays the
message in full.
>
> My question is there a way to go to detail page and
update record at the
> same
> time?
You can use the Update Record ZerverBehavrior and then have
it redirect to
the detailpage.
Joris -
Can I create a JAR that is an Applet and Desktop app at the same time?
Hi mates.
Can I create a JAR that is an Applet and Desktop app at the same time?
Thanks.Ricardo_Ruiz_Lopez wrote:
..I have one problem, I want a JMenuBar but I can't add it inside a jPanel.
Any idea?
SSCCE
It can be compiled/run as an applet or application something like this (e.g. for a Win command prompt).
C:\Users\Andrew\Hybrid> javac Hybrid.java
C:\Users\Andrew\Hybrid> java Hybrid
C:\Users\Andrew\Hybrid> appletviewer Hybrid.java
C:\Users\Andrew\Hybrid> // YES the previous line requires a '.java' suffix - trust me. ;-)Code
// <applet code='Hybrid' width='600' height='400'></applet>
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
public class Hybrid extends JApplet {
public void init() {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
GUI gui = new GUI();
getContentPane().add( gui.getMainPanel() );
setJMenuBar( gui.getMenuBar(false) );
validate();
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
JFrame f = new JFrame("Test Hybrid");
f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
GUI gui = new GUI();
f.setContentPane(gui.getMainPanel());
f.setJMenuBar(gui.getMenuBar(true));
f.pack();
f.setLocationRelativeTo(null);
f.setVisible(true);
class GUI {
private JPanel mainGui = null;
private JMenuBar menuBar = null;
public JPanel getMainPanel(){
if (mainGui==null) {
mainGui = new JPanel( new BorderLayout(3,3) );
mainGui.setBorder( new EmptyBorder(5,5,5,5) );
JToolBar tb = new JToolBar();
for (int ii=1; ii<6; ii++) {
tb.add( new JButton( "Btn " + ii) );
if (ii%2==0) {
tb.addSeparator();
mainGui.add(tb, BorderLayout.NORTH);
mainGui.add( new JSplitPane(
JSplitPane.HORIZONTAL_SPLIT,
new JScrollPane(new JTree()),
new JTextArea(20,20)
), BorderLayout.CENTER );
mainGui.add(new JLabel("Main user interface.."), BorderLayout.SOUTH);
return mainGui;
public JMenuBar getMenuBar(boolean isFloating) {
if (menuBar == null) {
menuBar = new JMenuBar();
if (isFloating) {
JMenu fileMenu = new JMenu("File");
fileMenu.add( new JMenuItem("Exit") );
menuBar.add( fileMenu );
JMenu helpMenu = new JMenu("Help");
helpMenu.add( new JMenuItem("About") );
helpMenu.add( new JMenuItem("Help") );
menuBar.add( helpMenu );
return menuBar;
The code is not intended to be well designed. It is just written to be brief and demonstrate a few points.
Edit 1:
Added some access keywords in a passing gesture that the sample aimed at encapsulation.
Edited by: AndrewThompson64 on Sep 2, 2010 1:34 PM -
Bash script: Rotate your wallpaper and SLiM theme at the same time
EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.
-
How do I make Organizer and Editor open at the same time?
I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
KCreate Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken -
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
How do I do a split screen to show the contents of my Library and a playlist at the same time?
I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?See this thread -> https://discussions.apple.com/thread/5666364
-
Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?
Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner
Please post (a relevant section of) it right on this Forum.
-
my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?
It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff... -
hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Maybe you are looking for
-
How can I capture a single video frame and save as an image in PS CS6 Extended?
I have checked similar posts on this subject, but I have a problem doing this: I "File>Open" a video clip [.m2ts file type] into PS CS6 Extended. PS sets the "Pixel Aspect Ratio" for "HDV 1080/DVCPRO HD 720 (1.33)" PS then warns of "Pixel Aspect Rati
-
Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'
error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, w
-
Handling Non English language characters in PDF output
Hi All, We have a requirement wherein we have to display an existing Smartform output in a PDF format. We have used OTF to PDF conversion and displayed the PDF output in a container. The issue is if certain characters are of non english language then
-
HT203687 How can I remove apps from my iPhone 5 home page?
How can I remove apps from my iPhone 5 home page?
-
Scheduled Batch jobs error : ora-01031 insufficient privileges
I have created a batch job that runs my database backups on a windows 2000 server. This job works perfect from the command line with the following syntax: coldbackup.bat PROD I have tried to schedule this backup to run every evening as follows: at 01