DPM 2012 upgrade to 2012 SP1
I'm trying to update my DPM 2012 server to DPM 2012 SP1 (with UR3).To install SP1, i need the DPM 2012 UR3 (KB2751230) installed, however each time i get "The DPM installation Failed"
[Log Extract]
MSI (s) (4C:70) [14:25:51:688]: Product: Microsoft System Center 2012 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2751230' could not be installed. Error code 1603. Additional information is available in the log file
C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2751230.log.
MSI (s) (4C:70) [14:25:51:689]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 - Data Protection Manager. Product Version: 4.0.1908.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft Data
Protection Manager 2010 Update - KB2751230. Installation success or error status: 1603.
MSI (s) (4C:70) [14:25:51:689]: Note: 1: 1729
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:690]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:690]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:691]: Transforming table Error.
MSI (s) (4C:70) [14:25:51:691]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (4C:70) [14:25:51:691]: Product: Microsoft System Center 2012 - Data Protection Manager -- Configuration failed.
[/Log]
I saw this post and it didnt help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ef8342a8-7a90-4eb1-b905-56deb0402d77/dpm-2012-update-rollup-3-could-not-be-installed
I have sysadmin rights on the DB, and am a domain admin, running the install as admin. I have also tried running it without the backup of the db, but that didnt work at all.
Can someone point me in the right direction?
Hi
Can you search the DataProtectionManager-KB2751230.log from the bottom up for the string: InstallExecute. Return value 3.
The real cause of the failure will be right above that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
Hello,
We are planning to upgrade our SCCM 2012 SP1 VM to R2. We are a small environment with 200 clients and run everything on the same VM. Currently installed is
- Windows Server 2012
- SQL Server 2012 SP1
- Windows Assesement and Deployment Kit 8.1-
- SCCM 2012 SP1 Build 7804.1000 - no CU is installed
We would like to upgrade to R2 and also use the opportunity to upgrade to Windows Server 2012 R2 and install the latest SP for SQL 2012 Server.
Is there a particular order we need to follow? First to upgrade the OS? Pay special attention of something?
We will make first a snapshot before performing the upgrade.
Thanks,
Edy
Edy from SwitzerlandFollow Gerry's guide and you'll be fine.
Here's my take on the upgrade if you want a second opinion
http://sccmentor.wordpress.com/2014/04/22/sccm-2012-sp1-cu1-to-r2-cu1-in-place-upgrade/
Both guides are missing the most important part (that's why it might be dangerous to follow next-next-finish-guides): you should always test the upgrade of the database (on a copy; using /testdbupgrade) before installing a service pack or R release!
The official documentation does contain that step:
http://technet.microsoft.com/en-us/library/464a3ce6-3bbf-45d8-aeaa-0040f64214c5#BKMK_UpgradeR2Checklist ("Test the database upgrade process on a copy of the most recent site database backup.")
Torsten Meringer | http://www.mssccmfaq.de -
Hello,
When I try to verify the prerequisites to upgrade my SCOM 2012 UR2 Platform to SP1 Beta, I have these errors :
The installed version of SQL Server is not supported for the operational database.
The installed version of SQL Server is not supported for the data warehouse.
But when I execute this query Select @@version on my MSSQL Instance, the result is :
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: ) (Hypervisor)
But
here, we can see that :
Microsoft SQL Server: SQL Server SQL 2008 R2 SP1, SQL Server 2008 R2 SP2, SQL Server 2012, SQL Server 2012 SP1, are supported.
Do I need to pach my MSSQL Server with a specific cumulative update package ?
Thanks.These are the requirements for your SQL:
SQL Server 2008 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see
System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
Check the SQL server agent service and see whether it is set to automatic AND started. This got me confused at my first SP1 install as well. This is not done by default...
It's doing common things uncommonly well that brings succes. -
Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR
Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:48
Event ID: 33503
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Data Warehouse" />
<EventID Qualifiers="32768">33503</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
<EventRecordID>13089</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>DW2012.contoso.loc</Computer>
<Security />
</System>
<EventData>
<Data>Transform</Data>
<Data>22989</Data>
<Data>TransformEntityRelatesToEntityFact</Data>
<Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
<Data> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:49
Event ID: 33502
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:49
Event ID: 33502
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus -
Issue while Upgrading vmm 2012 sp1 to vmm 2012 R2
Hi,
We are trying to upgrade the vmm setup to 2012 r2 ,we retained the existing vmm database
While upgrading to vmm 2012 r2 , got the below warning message:
"The VMM database contains one or more services in a failed state. Upgrading to VMM in System Center 2012 R2 is not recommended. Retry the upgrade after you have reinstalled VMM for System Center 2012 SP1 and repaired or removed these services. Click
Cancel to exit the upgrade."
Tried to find the bug using the vmm logs file like
errlevel
setupwizard
vmmserver
In erlevel log, the entry was "0".
Any idea what the issue is????1. You just need CU3 - these are cumulative
2. Sure, you can take a temporary snapshot. You need to take a SQL backup also.
3. Don't forget to test the upgrade process on a copy of your site database (use /testdbupgrade)
This guide may help you
http://www.gerryhampsoncm.blogspot.ie/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Upgrading SCVMM 2012 SP1 to 2012 R2
Please forgive me I've missed something obvious, but I have yet to see any documentation on how to upgrade SCVMM 2012 SP1 to the just-released R2. Running the setup detects that two components are already installed on the machine (the server management console)
and doesn't appear to present any upgrade options. The version its detecting as installed is SP1, not R2.
What's the upgrade process? Is there a document that discusses the 2012 SP1 -> R2 upgrade?
ThanksUpgrading to Virtual Machine Manager 2012 R2
VMM also does not support in-place upgrade. You have to uninstall VMM and retain the database. Before uninstalling VMM first uninstall any Update Rollup if you have such. After uninstalling VMM, ADK (Windows Assessment and Deployment Toolkit) 8.0 also have
to be uninstalled. Before starting the VMM 2012 R2 installation you have to install ADK
8.1. After VMM 2012 R2 installation is easy. You have to point a few settings, the installation will detect that you want to make upgrade to existing database and after a few minutes you will be upgrade to R2. After successful upgrade you need to start
the console and update your VMM agents also.
Kirpal Singh -
Exchange 2013 SP1 mailbox role on 2012 R2 and 2012
Hi,
We have a client who were running the following setup:
2 x Exchange 2013 CU2 CAS servers / Win Srv 2012
2 x Exchange 2013 CU2 MBX servers / Win Srv 2012
Active Directory etc, basically everything else, runs on Win Server 2012.
Due to upgrading etc, one of the mailbox servers has been removed. It is to be installed with Ex2013 SP1 with 2012 R2 from scratch, and eventually also upgrade the remaining CAS and MBX srvers with SP1 and 2012 R2.
So my question is..will this present a problem? Is it possible to have one MBX running 2013 CU2 on Server 2012 and one MBX running 2013 SP1 on Server 2012 R2?
I've read that failover clustering service is not possible between 2012 and 2012 R2, but i'm not sure how this effects Exchange.
Thanks for your time.Hi,
Each member of the DAG should be running the same operating system. It is not supported to run a DAG member on Windows Server 2012 R2 and run another member on Windows Server 2012.
What's more, upgrading the OS is not supported on Exchange server.
Here are some helpful threads for your reference.
Planning for High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.150).aspx
Exchange 2013 CU2 and Upgrading from Server 2012 to Server 2012 R2 issues
http://social.technet.microsoft.com/Forums/exchange/en-US/afba40de-efb6-4916-ae42-b09cff35e5d7/exchange-2013-cu2-and-upgrading-from-server-2012-to-server-2012-r2-issues
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Help with installing sql server 2012 upgrade advisor
Hello there,
I have two questions here:
1. My sql server 2005 is on Window Server 2003/SP2. Does this mean I cannot install sql server 2012 upgrade advisor on it? This page (http://msdn.microsoft.com/en-us/library/ms144256.aspx)
cites that the supported OS are "Windows Vista SP1, or SP2, Windows 7 and Windows Server 2008 R2."
2. I tried to install the upgrade advisor on my local machine (windows 7, 64-bit). Even after I installed "Microsoft SQL Server Transact-SQL ScriptDom ", I still got the error message "Setup is missing prerequisites: - Microsoft SQL Server 2012 Transact-SQL
ScriptDom, which is not installed by Updgrade Advisor Setup........" Why is that?
Thank you for your help in advance!Hello,
Have you installed .NET Framework 4.0 also?
Make sure you installed Transact-SQL ScriptDom from the following link:
http://www.microsoft.com/download/en/details.aspx?id=29065&ocid=aff-n-we-loc--ITPRO40886&WT.mc_id=aff-n-we-loc--ITPRO40886
(on the
Microsoft SQL Server 2012 Engine Feture Pack Components section)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Can I upgrade a SCOM 2012 SP1 UR4 machine to SCOM 2012 R2 UR1?
Adding more info:
Upgrading SCOM 2012 SP1 to SCOM 2012 R2
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Inplace upgrade Windows 2012 DC to Windows 2012 R2
Hi
We plan to upgrade some of our DCs from Windows 2012 to Windows 2012 R2.
Theese DCs is on a DMZ holding our virtual machines management servers so they are not the most critical DCs but they are critical enough to not working for a longer time.
Normally we dont do inplace upgrade but this is more of quick solution to raise the servers to the same OS level
So has anyone done an inplace upgrade from 2012 to 2012 R2 on domain controllers? Any problems?
We have two DCs, in differents locations.
BRYes, we've upgraded some of our DC's from Server 2012 to Server 2012 R2 without any issues at all. Obviously you want to do them one at a time, but we found it completely straight forward.
In fact, if it wasn't for some unrelated legacy issues at one site (old servers preventing us upgrading that sites DPM install as DPM 2012 R2 doesn't support them, but DPM 2012 doesn't support Server 2012 R2) we'd have upgraded all our DCs by now. -
Configuration Manager 2012 RTM Migration to SP1 CU3 or R2
Dear Pros,
I am planning to upgrade my current site (2012 RTM) to either SP1 CU3 or if possible to R2.
My Questions are :
i) Can I upgrate my Current site directly to 2012 SP1 CU3 or do i need to upgrade to SP1 -> SP1 CU1 - >SP1 CU2 -> SP1 CU3.
We are starting to have some Windows 8.1 clients and Server 2012 R2 on our network. Thus the requirement for SCCM to support those OSes.
ii) Is it possible to upgrade from 2012 RTM to R2 Directly or do i need to hop from SP1 to R2
Kind Regards,
MathieuOk guys, yesterday i moved my CAS and on Primary to SP1.
My components on my CAS and Primary site are failing.
The link between them is having Errors.
Looking up in the replmgr.log on the CAS i am having no errors. When viewing the rcmtrl.log
on the CAS agian i am having an error pertaining to the Configuration Data.
10:21:30.320-240><thread=8516 (0x2144)>
Processing Replication success. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:30.725-240><thread=4476 (0x117C)>
ERROR: Replication group "Configuration Data" has failed to initialize for subscribing site EB1, setting link state to Error.~~ $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:30.734-240><thread=8516 (0x2144)>
Rcm control is waiting for file change notification or timeout after 60 seconds. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:30.972-240><thread=7972 (0x1F24)>
Cleaning the RCM inbox if there are any *.RCM files for further change notifications.... $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:30.972-240><thread=7972 (0x1F24)>
Rcm control is waiting for file change notification or timeout after 60 seconds. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:30.973-240><thread=7972 (0x1F24)>
Processing replication pattern site.~~ $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:31.104-240><thread=8516 (0x2144)>
Retry for process replication is requested. $$<SMS_REPLICATION_CONFIGURATION_MONITOR><01-31-2014 10:21:34.575-240><thread=8516 (0x2144)>
Cleaning the RCM inbox if there are any *.RCM files for further change notifications....
When trying to upgrade the second Primary site. I am coming across errors during the prequisite checks.
Am i need of some help as this is my production environment and my boss will have my hide if this is not working :)
Kind regards,
Mathieu -
2008 R2 Certificate Authority In Place Upgrade to 2012 R2
Hello,
I've been reviewing all the MS Documentation on CA Migrations, but none cover In-Place upgrades. No documentation against the idea either.
We have a single Root CA running 2008 R2, I would like to upgrade to 2012 R2 in place.
Is that possible?
Not recommended?
Do I need to update to 2008 R2 w/SP1 first?
Or is it just better to Migrate to new installed 2012 R2 server?
Thanks, Tony
TonyHi,
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Regards, Yan Li -
I have multiple Windows Server 2008 R2 machines in which I am attempting to do an in place upgrade to 2012 R2, and it is repeatedly failing.
Setup gets all the way through, and it says Getting ready, followed immediately by an error saying: Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
I am attempting to install:
Windows Server 2012 R2 Datacenter (Server with GUI)
x64 Date modified 3/18/2014
I have found several posts, many discussing how disk space can be an issue, I have increased disk space so it shouldn't be an issue. I have also made sure the only only partition on disk 0 is C: and system reserved.
I have disabled all unessential services and went through and removed all unessential applications, and extras. Still getting the error.
Here is the update log
2014-11-24 08:20:20:715
888 ed8
AU AU initiates service shutdown
2014-11-24 08:20:20:715
888 ed8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:20:20:840
888 ed8
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:20:20:840
888 ed8
Service *********
2014-11-24 08:20:20:840
888 ed8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:20:20:840
888 ed8
Service *************
2014-11-24 08:23:27:265
892 9a0
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0500) ===========
2014-11-24 08:23:27:281
892 9a0
Misc = Process: C:\Windows\system32\svchost.exe
2014-11-24 08:23:27:281
892 9a0
Misc = Module: c:\windows\system32\wuaueng.dll
2014-11-24 08:23:27:265
892 9a0
Service *************
2014-11-24 08:23:27:281
892 9a0
Service ** START ** Service: Service startup
2014-11-24 08:23:27:281
892 9a0
Service *********
2014-11-24 08:23:27:635
892 9a0
Agent * WU client version 7.6.7600.320
2014-11-24 08:23:27:635
892 9a0
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-11-24 08:23:27:635
892 9a0
Agent * Access type: No proxy
2014-11-24 08:23:27:635
892 9a0
Agent * Network state: Connected
2014-11-24 08:24:14:827
892 9a0
Report CWERReporter::Init succeeded
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-11-24 08:24:14:827
892 9a0
Agent * Prerequisite roots succeeded.
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing global settings cache ***********
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS status server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * Target group: (Unassigned Computers)
2014-11-24 08:24:14:827
892 9a0
Agent * Windows Update access disabled: No
2014-11-24 08:24:14:951
892 9a0
DnldMgr Download manager restoring 0 downloads
2014-11-24 08:24:14:981
892 9a0
AU ########### AU: Initializing Automatic Updates ###########
2014-11-24 08:24:14:997
892 9a0
AU # AU disabled through Policy
2014-11-24 08:24:14:997
892 9a0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-11-24 08:24:15:043
892 9a0
AU Initializing featured updates
2014-11-24 08:24:15:043
892 9a0
AU Found 0 cached featured updates
2014-11-24 08:24:15:397
892 9a0
Report *********** Report: Initializing static reporting data ***********
2014-11-24 08:24:15:397
892 9a0
Report * OS Version = 6.1.7601.1.0.196880
2014-11-24 08:24:15:397
892 9a0
Report * OS Product Type = 0x00000007
2014-11-24 08:24:15:428
892 9a0
Report * Computer Brand = VMware, Inc.
2014-11-24 08:24:15:428
892 9a0
Report * Computer Model = VMware Virtual Platform
2014-11-24 08:24:15:428
892 9a0
Report * Bios Revision = 6.00
2014-11-24 08:24:15:428
892 9a0
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-24 08:24:15:428
892 9a0
Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-24 08:24:15:428
892 9a0
Report * Locale ID = 1033
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU AU finished delayed initialization
2014-11-24 08:24:20:865
892 6a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:187
892 9a0
AU AU initiates service shutdown
2014-11-24 08:55:38:187
892 9a0
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:55:38:250
892 9a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:297
892 9a0
Service *********
2014-11-24 08:55:38:297
892 9a0
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:55:38:297
892 9a0
Service *************
Any ideas on how I can resolve this, or further troubleshoot?I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!. -
Upgrade from 2012 to 2012 R2 just quits
Hello,
We have the task to upgrade a physical server HP DL360 G6. It is running Windows 2012 Datacenter with Hyper-V role and the target is to do in-place upgrade to Windows 2012 R2 Datacenter.
The DVD burned with official 2012 R2 .iso is inserted in DVD tray of server, I started install and after message "Setup is copying files..." and "Setup is starting...", then the install process just quits with no error.
No Panther\setupact.log and Panther\setuperr.log in C:\$WINDOWS.~BT\Sources.
The file C:\Windows\setuperr.log has no content and C:\Windows\setupact.log has no errors mentioned:
2014-06-01 21:50:49, Info UI Determining whether we should run ConX or legacy setup
2014-06-01 21:50:49, Info UI Downlevel OS is server. Continue to run legacy setup
2014-06-01 21:50:49, Info UI Determining if we are in WDS/Unattend mode
2014-06-01 21:50:49, Info UI No need to hide autorun
2014-06-01 21:50:49, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2014-06-01 21:50:49, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2014-06-01 21:50:49, Info UI AppWindow has layout style 0
2014-06-01 21:50:49, Info UI NavWindow has layout style 0
2014-06-01 21:50:49, Warning [0x0a0180] UI Failed to change the UI language to en-US.
2014-06-01 21:50:50, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-06-01 21:50:51, Info [0x0a018e] UI Passing command line parameter ("E:\2012 R2\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
Physical server has 128 GB of RAM but only 92 GB of free space on C: system partition, so I've limited physical memory to 32 GB in order to accomodate to upgrade requirements.
As I mentioned earlier, it has Hyper-V role and some virtual machines that are turned off.
Please advise,
Thanks,
Andrei
Andrei Moraru EndavaHi Andrei,
Based on your description, we need to make sure all VMs have been shutdown before doing the upgrade.
Besides, regarding upgrading from server 2012 with hyper-v role to 2012 r2, the following thread can be referred to as reference.
Upgrade from 2012 to 2012 R2
http://social.technet.microsoft.com/Forums/en-US/34412c47-3a37-4ead-aa67-f5119382ae9d/upgrade-from-server-2012-clusterhyperv-to-server-2012-r2-clusterhyperv?forum=winserverClustering
Best regards,
Frank Shen -
Teamed NICs no longer work after upgrade to 2012 R2
Hi,
My Hyper-V installation on 2012 Data Centre used two teamed NICs as a Hyper-V virtual switch configured to connect to the external network.
After upgrading to 2012 R2 Data Centre I no longer have connectivity to the external network. VMs that use this switch no longer have network connectivity.
I've removed the switch and reconfigured but with no joy. I've also completely removed the Hyper-V role and reinstalled but again - no joy.
For the time being the NICs are configured as separate switches and all is OK.
Any ideas?
Many thanks,
SeanHi Sean,
I would like to check if you need further assistance.
Thanks.
Best Regards
Jeremy Wu
Maybe you are looking for
-
I'm trying to delete credit card information on the account and only have my son use itunes gift card, but I do not see a "None" button as payment options either on his phone or when I log onto account on the computer. It won't let me delete credit c
-
Free trial- is publish to .exe disabled? Documentation doesn't mention this
Hi Everyone, We're using the free trial to see if we can open an existing Director file and export out an .exe. We believe the original Director file was created on a PC but are not positive. When we go to Publish, the .exe option is gray
-
This has been going on at least 3 months with the browser. The back arrow will disappear, sometimes the text completely disappears, sometimes you can see it but its unreadable, looks like the letters are missing pixels. Sometimes the images get corru
-
Hi, Want to configure e a warning message for Duplicate Vendor master creation. I can see a message F2144 configred, but this is only applicable if we create Vendor from FK01. In spro>Logistics general>Business partner>Vendor> message control for
-
Wireless connection to iPad air
Unable to connect to my new iPad air to my HP J 4680 office jet all in one