DPM Agent Not recognized as trusted domain agent

Hello,
I have an interesting problem. Running DPM 2012 SP1 and have a trust relationship setup between two domains, A and B. DPM server is in domain A. DPM server was backing up protected agents in domain B both in trusted and untrusted scenarios
since there were a handful of stand alone servers. The standalone servers now have been joined to the domain, but DPM will not recognized the agents in the domain.
Removed protection in DPM and uninstalled agent on servers, manually reinstalled agents and used the -SetDPMServer command. Attached in DPM, but DPM doesn't show agent associated with trusted domain B. When adding to a protection group, the servers
are showing up under workgroup and not under domain B.
Agent reports attached, but eventually backups error again with communication error event ID 318.
Anyone seen this before or have any suggestions?
Any assistance would be appreciated, need to get the server backed up!
Thanks

Hi,
On the DPM Server, see if the machine name is listed under this registry key.
HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\NtlmAuthData\
If so delete it, then try to add it to a PG.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

DPM 2010 not recognizing space on new disk in storage pool

We are running DPM 2010 and added one iSCSI drive with over 7 TB to the storage pool. When creating a new protection group, DPM throws the error "insufficient disk space". I'm new to DPM and none of my research has shown a reason for this error.
Any help would be deeply appreciated.

Hi,
Start the DPM power shell - then run these series of command, then copy / paste the
output in this thread.
PS C:\Program Files\Microsoft DPM\DPM\bin> get-dpmdisk dpm-server-name
...OUTPUT IS RETURNED..
PS C:\Program Files\Microsoft DPM\DPM\bin> diskpart.exe
Microsoft DiskPart version 6.1.7600
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: LC2-DPMLIB1
DISKPART> list disk
... OUTPUT IS RETURNED ...
DISKPART> exit
Leaving DiskPart...
PS C:\Program Files\Microsoft DPM\DPM\bin>
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Memeber server in a domain connected with external trust. The agent operation failed, DPM could not communicate with the DPM agent. Error ID 270

I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int, is in.
I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmserver.domainA.int
I successfully ran attach-productionserver.ps1 in DPM Management Shell.
When I click refresh in DPM 2010 Administrator Console/Management/Agents I get error id: 270
The agent operation failed on myprotectedserver.domainB.int because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
If myprotectedserver.domainB.int is a workgroup server, the password for the DPM user account could have been changed or may have expired.
I can ping myprotectedserver.domainB.int from mydpmserver.domainA.int
DPM 2010 backup of the domain_controller.domainB.int works fine.
The application log on myprotectedserver.domainB.int does not show any DPMRA related event logged.
The firewall on myprotectedserver is off.
Computers in domainA and domainB use their own networks connected through a router.
from mydpmserver
net view \\myprotectedserver.domainB.int /all - successfull
sc \\myprotectedserver.domainB.int query OpenSCManager FAILED 5, Access is denied
wmic /node:myprotectedserver.domainB.int OS list brief Error 0x80070005, Access is denied
from domaincontroller.domainB.int:
sc \\myprotectedserver.domainB.int query successfull
wmic /node:myprotectedserver.domainB.int OS list successfull
Any suggestions on how can I fix this?

Hi
I know this is old but are you still having a problem?

Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

Hi,
We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
We need to Protected Primary DPM from Secondary DPM.
When install DPM agent got error from secondary DPM console.
“DPM could not connect to the Service Control Manager on these servers ID: 33221”
Checked till now :
Visual C++ redistributable installed.
Checked DNS A record and both server can ping each other,
Widows Firewall off on both servers.
Net stop mpssvc ( Windows firewall service)
sc \\Server1 query
àable
to see result
Thanks,

Hi
You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
Do you have any other AV software that have firewalls built in?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCOM Agent in Pending Management with two way trusted domain

Hello Guys,
I have two trusted domain abc.com & xyz.com with two-way trust forest-wise authentication enabled and my SCOM 2012 R2 Management server is part of abc.com. And there are multiple host which are part of domain xyz.com.When I am pushing agent from SCOm console
to server then agents are getting installed with success message in task pane, but my agents are now at in pending Management.
for this I am getting Event ID 20002 opsmgr connector with following message "A device at IP 10.1.1.6:54277 attempted to connect but could not be authenticated, and was rejected." on SCOM Server.
And below message on the server where I am installing the agent.
Event 20071 OpsMgr Connector
The OpsMgr Connector connected to SCOM.abc.com, but the connection was closed immediately without authentication taking place. The most likely cause of this error is a failure to authenticate either this agent or the server . Check the event log
on the server and on the agent for events which indicate a failure to authenticate.
Event 21016 OpsMgr Connector
OpsMgr was unable to set up a communications channel to SCOM.abc.com and there are no failover hosts. Communication will resume when fabSCOM2.nmfab.loc is available and communication from this computer is allowed.
Event 20070 OpsMgr Connector
The OpsMgr Connector connected to SCOM.abc.com, but the connection was closed immediately after authentication occurred. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received
configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
Need help to resolve this can any one help me.
Thanks in Advance.
NM-BG
NM-BG

Hi,
Here i suspect Authentication issue.
1.Could you please if 88, 389 & 3268 ports are opened between client domain controller and management server.
2. if ports are already open collect netmon traces on both client and management server simultaneousely and check if there are any kerborose errors
Kind Regards,
Naveen Kumar B
~Bommi

Term is not recognized when executing PowerShell Script through SQL Agent using CMDEXEC

I am trying to simply execute a PowerShell script that is stored in a file on a network drive through SQL Agent as a job. The script is a basic copy from one directory to another. I have run and successfully executed this from a command prompt outside
of SQL Agent. When I execute this through SQL Agent as a Operating System (CmdExec) command I am getting an error that the term is not recognized as the name of a cmdleet, function, script file or operable program. I have executed many different ways
put found an article to use double quotes in the network path which I have done with no success.
I am executing the following command as a job in SQL Agent:
PowerShell H:\"\PowerShell""\PS_Scripts\"\batchcopyFFLWithProgress.ps1 through SQL Agent job
I get the following error message:
04/21/2015 10:01:09,Copy FFL Files,Error,1,NY11266-LTW7E\JPLAPTOPSQL,Copy FFL Files,Copy FFL files,,Executed as user: NT Service\SQLAgent$JPLAPTOPSQL. H:\PowerShell\PS_Scripts\batchcopyFFLWithProgress.ps1 : The term 'H:\PowerShell\PS_Scripts\batchcopyFFLWithProgress.ps1'
is not recognized as the name of a cmdlet<c/> function<c/> script file<c/> or operable program. Check the spelling of the name<c/> or if a path was included<c/> verify that the path is correct and try again.
At line:1 char:1 + H:"\PowerShell\PS_Scripts"\batchcopyFFLWithProgress.ps1 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound:
(H:\PowerShell\P...ithProgress.p s1:String) []<c/> CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException. Process Exit Code 1. The step failed.,00:00:03,0,0,,,,0
Content of batchcopyFFLWithProgress.ps1 which has the PowerShell script:
$source=ls H:\SQLTest\Script\TestData\*.*
$i=1
$source| %{
[int]$percent = $i / $source.count * 100
Write-Progress -Activity "Copying ... ($percent %)" -status $_ -PercentComplete $percent -verbose
copy $_.fullName -Destination H:\test -Recurse
$i++
I have searched the internet and have not found any resolution to my error. If someone has experienced this error and found the resolution I would greatly appreciate your help.

I have change the service account for SQL Agent to be my domain account as I have local admin rights to my laptop. I stopped and started the services for SQL Agent and than started the job to run which is copying locally to minimize any network drive
issues. I am still getting the same error message as it is showing that I am executing the job under my domain account? Any thoughts what it could be?
ErrorMsg
04/23/2015 11:21:06,Copy FFL Files,Error,1,ServerName\InstanceName,Copy FFL Files,Copy FFL files,,Executed as user: Domain\DomainAccount. \\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1 : The term '\\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1'
is not recognized as the name of a cmdlet<c/> function<c/> script file<c/> or operable program. Check the spelling of the name<c/> or if a path was included<c/> verify that the path is correct and try again. At
line:1 char:1 + \\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (\\ServerName...ithProgress.ps1:String)
[]<c/> CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException. Process Exit Code 1. The step failed.,00:00:02,0,0,,,,0
Script
$source=ls "\\ServerName\Test\TestData\*.*"
$i=1
$source| %{
[int]$percent = $i / $source.count * 100
Write-Progress -Activity "Copying ... ($percent %)" -status $_ -PercentComplete $percent -verbose
copy $_.fullName -Destination "\\ServerName\Test\test" -Recurse
$i++

DPM 2012 R2 Agent not rechable : Not enough storage is available to complete this operation (0x8007000E)

Hi,
We have DPM 2012 R2 installed on Windows 2012 R2 and Protecting SQL 2012 with DPM and recovery point created twice per day.
And getting frequently warning and error mails “DPM Agent not Reachable” and "Not enough storage is available to complete this operation (0x8007000E)" in DPM Console.
I know its SQL server and it occupies most of the RAM and CPU, but can I set its frequencly or time interval of DPM Agent perodic check to avoid this mails.

Hi,
Did you try limiting the sql memory to 60% of physical memory ?
Also adjust the paging file to be physical ram * 1.5 + if necessary.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
Rob

Hello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl

[SOLVED] ssh-passphrase not recognized by ssh-agent

After an upgrade yesterday, I cannot enter my system anymore. It boots with some (rapidly passing) error messages (related to AF_UNIX) and shows me the login prompt. But fontsize isn't the one I had before, and customized keymappings of my keyboard are missing. Thus my configurations for the console have not been read.
Then I can successfully enter my login and password - but not the ssh-passphrase asked for by ssh-agent. I typed it many times, it must be correct, but is not recognized anymore. So at this point I'm stuck. I rebooted and tried fallback Arch - with the same result.
Then I chose the grub> shell during boot, and tab gave me a list of available commands. But I don't know what to do now.
So my question is:
how can I enter my system besides the ssh-passphrase problem? And if I managed to get into the system again - what might be the cause of this problem?
EDIT:
Ok, I tried to enter my pass-phrase as if I had an US keyboard (I have a German keyboard) and that worked. Now I can enter my system again, so I close this question. Maybe I will open another question soon, related to the root-cause of the problem (why my configuration isn't loaded on startup).
Last edited by 4on6 (2012-11-29 11:35:01)

After an upgrade yesterday, I cannot enter my system anymore. It boots with some (rapidly passing) error messages (related to AF_UNIX) and shows me the login prompt. But fontsize isn't the one I had before, and customized keymappings of my keyboard are missing. Thus my configurations for the console have not been read.
Then I can successfully enter my login and password - but not the ssh-passphrase asked for by ssh-agent. I typed it many times, it must be correct, but is not recognized anymore. So at this point I'm stuck. I rebooted and tried fallback Arch - with the same result.
Then I chose the grub> shell during boot, and tab gave me a list of available commands. But I don't know what to do now.
So my question is:
how can I enter my system besides the ssh-passphrase problem? And if I managed to get into the system again - what might be the cause of this problem?
EDIT:
Ok, I tried to enter my pass-phrase as if I had an US keyboard (I have a German keyboard) and that worked. Now I can enter my system again, so I close this question. Maybe I will open another question soon, related to the root-cause of the problem (why my configuration isn't loaded on startup).
Last edited by 4on6 (2012-11-29 11:35:01)

Is it advisable or practical to run SQL Agent with Account from another domain?

A SQL Server in domain A needs to mount databases downloaded on a weekly basis to a second SQL Server, in domain B.
Right now, the two domains, which were deliberately separated for security, have no trust.
Currently, a manager of the server in domain A uses credentials in domain B to logon to domain B and do a file copy of the databases, which he then mounts on the server in domain A.
Having noticed that the best way to place a copy of a database onto a remote server is via SQL backup, as opposed to a file copy, because it is five times faster, and suspecting that a SQL restoration
operation might be as much faster than the current file copy from domain B to A, the idea has been floated that the SQL Agent in domain A could schedule a restoration from databases residing on the hard drive of the server in domain B.
Can credentials of an account in domain B be used to drive the SQL Agent on the server in domain A, and if so, does this require the establishment of a trust? I suspect that it would, although
once a user of the server in domain A establishes a connection to a file share in domain those credentials are cached for future use.
Would using an account in domain B to logon the SQL Agent in domain A -- with or without a trust -- cause all the jobs in domain A to fail on the grounds of missing permissions?

Thank you for your prompt reply.
The FTP download seems technically feasible. But, I think, the FTP transfer would not provide the speed our organization has been looking for. We are making do with 100Mbps where we actually
need 1Gbps.
The SSIS proposal is not feasible because a trust between the two domains would not be allowed. In any event, if it were a straight file copy, not a SQL backup, we would not obtain the speed
we seek. You mention, in this context, a 'file copy.' Is this a simple copy from an arbitrary TCP port on Server B to port 445 on server A, or is it a different type of copy, such as that used when a SQL runs a backup job to a network destination?
What do you think of this: in domain B, where the files reside, use the proxy account to run a backup job to the server in domain A. That would give us the speed we need. But that would also
require a trust, wouldn't it? Is there any way to get around the need for the trust? If the backup job could run from server in domain B to the server in domain A, another job could be setup on server in domain A to complete the restore.
When I create the SQL Proxy, do I supply the name of the account in the trusting domain? When I look at the dialog for the creation of the "new proxy account" on a server without trust
connections, I am offered only two GUIDs as candidate proxies. Would that change once I create the trust, and would I be allowed to browse accounts in the trusting domain?
Are you familiar with the dramatic advantage taht a SQL backup job holds over a copy of files from point A to point B? It's something like ten times faster.
Yours,
Bob Hindla.

Domain Agents and E6900 with multiple NICs.

Hello,
I have some issues configuring Sun management Center 3.6 (and 3.6.1) on a network with this characteristics:
2 x E6900 (with 2 Domains each one)
1 x v210
The Server Component of Sun Management Center is installed on the v210. In this machine are installed the Platform Agents of the 2 System Controllers of the 2 E6900.
Each domain has installed de Sun Management Center Agent.
The network configuration of the Domains is this:
Each domain has 3 NIC on 3 different network interfaces, and each NIC has its own hostname. One of this NIC is destinated to the administration network to be used for the Sun Management Center. This nic, as I said before, has its own hostname but it its different of the nodename (the node name is the same as the public interface of the domain, not the administration interface).
The Domains does not use DNS, and the information included on the /etc/hosts is related to local NICs and the NICs of the other Domains, but anyone contains the NIC of the admin interface of other domain nor the NIC of the v210.
The v210 does not has DNS neither, and has only their own information on /etc/hosts.
All Domains has Solaris 9, and v210 has Solaris 10.
Basically the problem is:
"The Domain Agents cannot communicate with SunMC Server", when I manually add each agent. The discovery process doesn't work neither.
I checked the domain-config.x of one domain and it shows:
agent = {
agentServer = "venwas1"
logicalAddressMode = "ip"
snmpPort = "1161"
"venwas1" is the hostname of the public interface, nor the administration interface.
I changed the value for the hostname of the administration interface with no success; then changed for the ip address of the administration interface; and no success neither.
The default platform agent works, but does not appers with the corrent icon on the SunMC console. Its appears like a folder icon, and the documentation said that the Platform Agents is represented with a specific Icon.
Please, anyone can help me ?
Thanks in advance.

Hi Alejandro,
I checked the domain-config.x of one domain and it
shows:
agent = {
agentServer = "venwas1"
logicalAddressMode = "ip"
snmpPort = "1161"
nwas1" is the hostname of the public interface, nor
the administration interface.
I changed the value for the hostname of the
administration interface with no success; then
changed for the ip address of the administration
interface; and no success neither.If you just change the hostname or IP, but don't do anything else, it won't work as the Agent has already created security keys for that old entry and needs to be reseeded. Change the entry to the IP that's on the same network as your SunMC Server, then run this command on the Agent while it's turned off:
/opt/SUNWsymon/sbin/es-run base-usm-seed.sh -s <SEED> -c agent
..replacing <SEED> with the same seed/password you used on your SunMC Server. Then start the Agent back up, wait for it a couple minutes, and try to make an icon for it again.
The default platform agent works, but does not appers
with the corrent icon on the SunMC console. Its
appears like a folder icon, and the documentation
said that the Platform Agents is represented with a
specific Icon.If the icon is incorrect then your SunMC Server is missing some files (or you've found a bug). You'll want all these addons installed on your Server:
Dynamic Reconfiguration for Sun Fire High-End and Midrange Systems
Sun Fire Midrange Systems Platform Administration
Sun Fire Midrange Systems Domain Administration
If you think you may be missing some (look in /var/opt/SUNWsymon/install/install.[timestamp] to see how you answered questions during your last install) you can run /opt/SUNWsymon/sbin/es-inst again and point it to your distribution media and it will only ask about packages that may be missing. If you do end up adding in some of the Midrange addons then a simple Console restart should refresh your Platform icons.
Regards,
[email protected]
http://www.HalcyonInc.com

Alarms not appearing for events - Agent Not Responding

Hi
I'm hoping someone may be able to help with a frustrating issue.
I have a setup with SunMC 4.0 monitoring approx 15 SunMC agents. The problem is some of these agents are not displaying alarms for events that occur.
E.g. if I trigger an alarm on a host by say filling up a filesystem, on some hosts an alarm will appear in the Alarm tab as exepcted, but on other hosts no alarm appears and hence I cannot acknowledge the alarm.
After doing a bit of digging I have found the following:
1) When the event is triggered on the client the trap is sent to the server
2) The server then tries to communicate with the agent on the client and I see this error in the event.log
[012578fd 0086 ]info Jul 28 14:59:06 event eventmgr: sending snmp collection request to XXXX 1161 XXXX for startline 0...................................................................
[012578ff 0098 ]error Jul 28 14:59:06 event eventmgr: event collection failed for XXXX 1161 XXXX line 0 - error {} {Agent Not Responding}.................................................
3) If I snoop between the 2 servers I can see communication between the server and the client on port 1161 so dont believe it is a network issue
4) I have tried uninstalling and reinstalling the agent. This strangely cured it on one server with the problem, but on another server the problem persists even after reinstalling the agent multiple times
5) I have logged into the postgress database and can see that events are not being logged in the events table (hence not being displayed in the Sun MC console).
6) I have tried reseeding the agent and that makes no difference
7) I have ensured the agent is listening on one network interface by adding snmpBindAnyAddr = "0" to the agent section of the domain-config.x file
I am not sure where else to look for pointers as to what is going on. What beats me is that the servers which the agents are running on all have identical builds built from jumpstart and are on the same network, yet some work and some dont!
Any help from anyone greatly received...
thanks

Hi there,
I found a solution to get the alarmflow going again:
1. Delete the node from SunMC Java Console
2. Stop the agent
3. Remove all logfiles in /var/opt/SUNWsymon/log
4. Start the agent
5. Wait 2 minutes and add the node in SunMC Java Console
After these steps I can see alarms coming through and when adjusting thresholds I can trigger new alarms which show up on the Hostview Alarms tab.
Unfortunately, this only seems to be a temporary solution, at least for some nodes.
Anyway, I figured I'd share this info with everyone. Maybe it will help with your investigation and if someone finds a permanent solution please feel free to post it here ;-)
Best Regards,
Emerald

Exchange 2010 Edge Transport - Not being detected by SCOM agent?

All,
I recently installed the SCOM 2007 R2 agent onto our Edge Transport server for Exchange 2010. Our architecture is pretty simple. We have a DMZ network where I have a SCOM 2007 R2 Gateway server and our Edge Transport server.
Essentially it goes like this:
Edge Transport Server Agent <-> Gateway Server <-> SCOM RMS server
I have the Exchange 2010 and the FOPE for Exchange 2010 MP's loaded on our RMS server. When I loaded the SCOM 2007 R2 agent onto our Edge server, the agent discovered it had FOPE and does reflect as such on the RMS server, but it did not seem to pick
up that it was also the Exchange Edge Transport role.
I looked on the RMS server in the Authoring -> Object Discoveries and the Edge transport is set to discover, so I am a little stumped as to why the agent didn't discover the role.
Any suggestions where to look next?

Just a little more detail on this. I've been working on this exact issue for probably 3 weeks with an engineer.
This issue is actually a bug in the Exchange 2010 MP.
How is it a bug exactly? Well, the MP is looking for the Active Directory site that the Edge Server is a member of... let's think about this, the Edge server is NOT domain joined, and as such, shouldn't have an active directory site.
Additionally, the regkey path referenced above is incorrect, though it seems that numerous others have figured that out on their own as well. The correct regkey path should be:
hklm>system>currentcontrolset >services>netlogon>parameters
So sure, this "fixes" the issue - but the real issue is that the MP is looking for an Active Directory site, on servers that aren't a member of an active directory site. Kind of a BIG oversight by the MP authors in my opinion.
I'm sure there are plenty of orgs relying on SCOM to monitor their Exchange 2010 implementations that don't even realize that their Edge servers aren't being monitored for the Exchange roles.

Scenario is not running in ODI Standalone agent from OPMN

when i am trying to run my scenario using ODI standalone agent it is not running and it is giving below error in opmn log file.
VARNING: Error retrieving ID statistics for repository WORKREP1.
ODI-1406: Agent Agent_ODI started with warning: JDBC connection error occurs while connecting to the work repository WORKREP1.
Caused By: oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception during repository access.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)
     at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
     at oracle.odi.runtime.agent.utils.AgentOdiInstance.createWorkRepository(AgentOdiInstance.java:60)
     at oracle.odi.core.OdiInstance.<init>(OdiInstance.java:581)
     at oracle.odi.runtime.agent.utils.AgentOdiInstance.<init>(AgentOdiInstance.java:28)
     at oracle.odi.runtime.agent.utils.AgentOdiInstance.createInstance(AgentOdiInstance.java:32)
     at oracle.odi.runtime.agent.utils.OdiInstanceCache.getWorkInstance(OdiInstanceCache.java:181)
     at oracle.odi.runtime.agent.support.InternalAgentUtils.getAuthenticatedTargetOdiInstance(InternalAgentUtils.java:336)
     at oracle.odi.runtime.agent.servlet.AgentServlet.verifyAllIdStatistics(AgentServlet.java:988)
     at oracle.odi.runtime.agent.servlet.AgentServlet.startup(AgentServlet.java:361)
     at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:239)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at org.mortbay.jetty.servlet.ServletHolder.initServlet(ServletHolder.java:431)
     at org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:263)
     at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
     at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:676)
     at org.mortbay.jetty.servlet.Context.startContext(Context.java:140)
     at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1239)
     at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517)
     at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:466)
     at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
     at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
     at org.mortbay.jetty.Server.doStart(Server.java:224)
     at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
     at oracle.odi.Agent.startAgent(Agent.java:204)
     at oracle.odi.Agent.main(Agent.java:538)
Caused by: org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:82)
     at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:524)
     at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:588)
     at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:613)
     at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:645)
     at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:111)
     at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:121)
     at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:136)
     at oracle.odi.core.repository.support.RepositoryUtils$RepositoryInfoSource.loadRepositoryInfo(RepositoryUtils.java:182)
     at oracle.odi.core.repository.support.RepositoryUtils.loadWorkRepositoryInfo(RepositoryUtils.java:382)
     at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:174)
     ... 25 more
Caused by: java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
     at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
     ... 35 more
Caused by: java.sql.SQLException: Ett undantag uppstod när anslutning hämtades: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:488)
     at oracle.ucp.util.UCPErrorHandler.throwSQLException(UCPErrorHandler.java:163)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:943)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:873)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:863)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.ucp.UniversalConnectionPoolException: Kan inte hämta anslutning från datakälla: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:368)
     at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolException(UCPErrorHandler.java:49)
     at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolException(UCPErrorHandler.java:80)
     at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection(DriverConnectionFactoryAdapter.java:122)
     at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.createOnePooledConnectionInternal(UniversalConnectionPoolImpl.java:1610)
     at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.access$600(UniversalConnectionPoolImpl.java:1446)
     at oracle.ucp.common.UniversalConnectionPoolImpl.createOnePooledConnection(UniversalConnectionPoolImpl.java:514)
     at oracle.ucp.jdbc.oracle.OracleJDBCConnectionPool.createOnePooledConnection(OracleJDBCConnectionPool.java:129)
     at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnectionWithoutCountingRequests(UniversalConnectionPoolImpl.java:297)
     at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnection(UniversalConnectionPoolImpl.java:142)
     at oracle.ucp.jdbc.JDBCConnectionPool.borrowConnection(JDBCConnectionPool.java:157)
     at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:931)
     ... 9 more

i have tried to change the all the ways in odiparms file but i am getting the same error message....

Windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....aaahhh

windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!

Hi rubicon7,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
Have a great day!
- Judy

DPM Agent Not recognized as trusted domain agent

Similar Messages

Maybe you are looking for