DPM Console hangs when adding servers by Modify Protection Group

Hi Guys,
I hope you can help
I've created several protection groups and need to add a couple more servers to each, but I'm having issues where the DPM console hangs. This is what I'm doing:
Under Protection:
Right Click the Protection Group and select: Modify protection group...
Under "Select Group Members" - expand the server and select it's volume or SQL DB, etc and click Next
Under "Select Data Protection Method", I click Next
Now the MMC stops working. There are no error messages, no unresponsive notifications, it just doesn't do anything.
I can't click Back, Next, Cancel, Help or change any of the other options on this page.
I left it once and went to bed, when I came back 12 hours later, nothing had changed.
I have to open task manager and force close the MMC and reopen but I'm unable to add any additional servers. I can create new Protection Groups but would rather avoid this.
For reference
OS: Server 2012 R2 64bit
DPM: 2012 R2 UR4
The issue occurs using local console over RDP or via the client console on Windows 7
Does anyone have an idea how I can get around this issue?
Thanks
Ryan

After further playing - It's not isolated to adding servers. I actually can't continue past the "Select Data Protection Method" page even if I don't change anything in terms of the selection lists.
Anyone else having issues or know what the problem is?

Similar Messages

Console hangs when adding category

I'm trying to add a sub-category to the Local PKGs category through the console. I currently have three architectures: SOLARIS9_SPARC, SOLARIS10_SPARC and SOLARIS8_SPARC. I'm able to create the sub-category successfully under SOLARIS8 and SOLARIS10. However, when trying to create it under SOLARIS9, the console seems to hang indefinitely.
I've seen similar problems when adding a configuration file to the SOLARIS9 component list via the cli. However, the job did complete after a couple of hours.
Again, this only seems to be an issue when modifying the SOLARIS9_SPARC inventory.
Any ideas?
Thanks,
Steve

have you run the backup.sh recently? this performs a vacuumdb and also re indexes tables - this can greatly improve performance. also have you applied the uce sds and console patches? if after applying the patches and running the backup you still face the same problem, you should open a support case with the uce support group

Acrobat 9 hangs when adding a text box

It seems that any installation of Acrobat 9 I have come across, Acrobat hangs when adding a text box from "Forms>Add or Edit Fields".
I may need to apply an update or two but this problem seems very consistent and reproducable.
I plan on trying Acrobat 9 Pro on Windows XP to see if it makes any difference, but does anyone have any ideas? OTHER than upgrading to Acrobat X?

Textbox takes few extra seconds to establish himself, but it never hangs for me. Did you tried to click-n-drag to create Textbox?

MMC crashes when attempting modification of a protection group in DPM 2012 SP1 RU3

Hi All,
I've got a problem with my DPM 2012 SP1 server for a few weeks now. It's backing up and restoring fine, but when I attempt to modify any protection group, the MMC crashes. This happens even before the modify protection group dialog is displayed, just a few
seconds after clicking 'modify' with the protection group selected.
it was running DPM 2012 SP1 RU1, is now running RU3, this update did not make the difference I was hoping for. Also installation of the DPM console on a remote management server results in the exact same problem.
Below is the error message. Has anyone else had this or a similar problem and solved it?
Thanks,
Jacob
Description:
AppName: mmc AppVer: 4.1.3313.0 ModName: mmc.exe
ModVer: 6.2.9200.16384 StackHash: 7C18B55A
Problem signature:
Problem Event Name: DPMException
Application Name: mmc
Application Version: 4.1.3313.0
Module Name: mmc.exe
Module Version: 6.2.9200.16384
Exception Name: System.NullReferenceException
Exception Point: Microsoft.Internal.EnterpriseStorage.Dls.UI.Dpw.SelectionPage.ConstructAllServersView
Other: 7C18B55A
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1043
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi
I had the same problem with Sharepoint backups, there was a problem with the protection group so i removed it and added it back. since then no issues.

Moving SQL servers from one Protection group to another

We are using DPM 2012 R2 Update Rollup 4. We have started to move some SQL servers from a Protection group with 90 days of retention to a Protection group with 15 days of retention. The recovery data is co-located on the backup device and we are using
disk based backup. A couple days after moving a couple of the servers, I have noticed that the number of recovery points has stayed the same and not decreased. It would seem that when moving to a different protection group, that the SQL server
would inherit the new retention settings instead of retaining the ones from the old protection group. When I moved them, I stop protection of the databases and then added them to the new group. Why is this occurring and how do I get the new retention
settings in the new protection group to take affect?

Thanks for the information. DPM is really a pain when trying to move co-located data sources to different protection groups. I do hope in future versions that this is simplified and corrected. I am now stuck for 90 days with data that I
don't want and I can't get rid of without getting rid of every recovery point for that group. That is bad news when my LDM DB is almost full.
An important note for those who are trying to see how many extents certain data sources have when following this article
http://blogs.technet.com/b/dpm/archive/2010/03/30/what-volume-to-migrate-first.aspx
If your DPM DB has changed from "DPMDB" to DPMDB with bunch of random characters, you will need to this line in the script for it to work.
$db = $srvr.Databases["DPMDB"]
<-- change this to your server’s DPMDB name
Also, you will need to greatly increase the width of your command window to see the "NumberOfExtents" column which is the most important column.

Weblogic Console hangs when connecting to one of two servers in a cluster

          Hello,
          Please email me as well as posting reply if possible as resolution is required
          immediately.
          We have two Weblogic 5.1 servers (named server1 & server2) running in a cluster
          using multicast over a VLAN and a DNS entry of "mycluster" to point to the list
          of two IP addresses.
          Both servers say they have joined the cluster upon startup, however, only one
          of them (server2) reports when the other one (server1) has joined, but not vice
          versa.
          Also, the Weblogic Console only displays server1 in the cluster, and hangs when
          it tries to attach to server2, which generates exceptions on server2. The error
          is as follows:
          <Kernel> ExecuteRequest failed. NullPointerException at weblogic.cluster.MemberStash.getManagedSubObjects(MemberStash.java:259).
          I expect this would also prevent replication from working properly.
          One other thing that might be related to the above is that when the URL "mycluster:7001"
          is used directly in the web browser, it sometimes (not always, not sure if it
          matters on which machine) gives the error: "Inconsistent cookie: primary !=
          me".
          Two IIS web servers are being proxied to the cluster URL, and round-robin load
          balancing of the app servers appears to work fine from this perspective.
          Both servers appear to be working properly otherwise.
          Many thanks for any clues,
          Ben


          primary != me occurs when you restart WLS but do not exit the browser, then hit
          WLS (the browser has a stale cookie).
          Mike
          "Ben Yenko-Martinka" <[email protected]> wrote:
          >
          >Hello,
          >
          >Please email me as well as posting reply if possible as resolution is
          >required
          >immediately.
          >
          >We have two Weblogic 5.1 servers (named server1 & server2) running in
          >a cluster
          >using multicast over a VLAN and a DNS entry of "mycluster" to point to
          >the list
          >of two IP addresses.
          >Both servers say they have joined the cluster upon startup, however,
          >only one
          >of them (server2) reports when the other one (server1) has joined, but
          >not vice
          >versa.
          >Also, the Weblogic Console only displays server1 in the cluster, and
          >hangs when
          >it tries to attach to server2, which generates exceptions on server2.
          > The error
          >is as follows:
          ><Kernel> ExecuteRequest failed. NullPointerException at weblogic.cluster.MemberStash.getManagedSubObjects(MemberStash.java:259).
          >I expect this would also prevent replication from working properly.
          >
          >One other thing that might be related to the above is that when the URL
          >"mycluster:7001"
          >is used directly in the web browser, it sometimes (not always, not sure
          >if it
          >matters on which machine) gives the error: "Inconsistent cookie: primary
          >!=
          >me".
          >
          >Two IIS web servers are being proxied to the cluster URL, and round-robin
          >load
          >balancing of the app servers appears to work fine from this perspective.
          >Both servers appear to be working properly otherwise.
          >
          >Many thanks for any clues,
          >Ben

Console hanging when doing LDAP query

Hi,
I am able to connect to a test LDAP server (that has 10 users) from WLS and am
able to see the users in Web interface of the Console under Security>realms>myRealm>users.
This works as desired. No problem.
But when I try to connect to an LDAP server that has 1900 users the console hangs
up and eventually times out. The query strings are all fine because I verified
them using an external LDAP browser.
I checked in MyTestServer>Monitoring>Performance and it is using only 25% of the
memory. So it is not a memory issue. Then I set the logging threshold to 'info'
but there are no special messages.
Now I am wondering where else should I look for to fix this. It works fine when
there are small number of users. But when there are large number of users, WebLogic
just hangs...
Thanks,
Dan

WLS build from BEA comes with SP1. This is what I am using at the moment. So I
am not sure what SP1 are you referring to!
The SP1 for Platform is yet to be released though. But this is more of a server
issue (I think). Also, I looked up in the 'known bugs' section. This is not listed
in there...
* Do you know what exactly is causing this problem?
* Is there a work around?
-Dan
"Noah Campbell" <[email protected]> wrote:
>
This is a known issue. Supposedly a fix is scheduled for Service Pack
1.
"Dan Backman" <[email protected]> wrote:
BTW, I am using WLS 8.1 (platform) server. I tried with 250 users in
the LDAP server
and the WL Admin console still hangs when trying to access MyTestServer>Security>Myrealm>users.
-Dan
"Dan Backman" <[email protected]> wrote:
Hi,
I am able to connect to a test LDAP server (that has 10 users) fromWLS
and am
able to see the users in Web interface of the Console under Security>realms>myRealm>users.
This works as desired. No problem.
But when I try to connect to an LDAP server that has 1900 users the
console hangs
up and eventually times out. The query strings are all fine becauseI
verified
them using an external LDAP browser.
I checked in MyTestServer>Monitoring>Performance and it is using only
25% of the
memory. So it is not a memory issue. Then I set the logging threshold
to 'info'
but there are no special messages.
Now I am wondering where else should I look for to fix this. It works
fine when
there are small number of users. But when there are large number ofusers,
WebLogic
just hangs...
Thanks,
Dan

Console hanging when press a button

I just installed the trial version of weblogic 5.1 on redhat linux 7 with
sun jdk1.3
After making the changes described in the installation guide I can run the
server and connect to it with the console.
The console is able to navigate around the server and see stuff like what
ejb's are deployed but any time I press a button that has an ellipses (eg
"Shutdown Server..." or "New Deployment...") the console hangs.
This does not happen when I press other buttons (eg "Disconnect" or "Garbage
Collect").
I could not see this problem in the newsgroup or on the web site, so if
anybody can tell me how to solve it I would be very grateful.
Thanks,
Barry.

Hi --
Sounds like a GUI (swing?) problem of some kind. Consider using the
Admin Servlets to see the same information. The console isn't really
a necessary part of Administering the server.
Also, the console is gone in 6.0... it's replaced with a web-based
configuration tool -- much better.
Cheers,
-jg
Barry Dunne wrote:
>
I just installed the trial version of weblogic 5.1 on redhat linux 7 with
sun jdk1.3
After making the changes described in the installation guide I can run the
server and connect to it with the console.
The console is able to navigate around the server and see stuff like what
ejb's are deployed but any time I press a button that has an ellipses (eg
"Shutdown Server..." or "New Deployment...") the console hangs.
This does not happen when I press other buttons (eg "Disconnect" or "Garbage
Collect").
I could not see this problem in the newsgroup or on the web site, so if
anybody can tell me how to solve it I would be very grateful.
Thanks,
Barry.

Mail slow/hangs when adding attachment

Recently Mail hangs or takes a long time, showing the spinning beachball, when adding an attachment. For instance it took over two minutes to add a 44k Word document - previously it would be seconds.
This happens with all user accounts on this Mac.
I've not added any software recenttly that may have caused this.
Any suggestions?
Thanks
Bruce

Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations (Parallels in particular, if you have that installed) and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
I've not added any software recenttly that may have caused this.
Not sure what you mean. Are you saying that you haven’t installed any software recently, or that you have installed something but you know for sure it cannot have a bearing on this? If the latter, how do you know?

Hangs when adding contacts

I'm trying to add a bunch of contacts to my ipad2 and it keeps hanging when I hit done. Any thoughts?

In addition, iMessage will need to be properly set up on their device and you must have the correct contact information corresponding to that set up.

DPM 2012: MMC crashes when working with 2 particular protection groups

I have a problem with 2 particular protection groups that will not allow me to perform a backup to tape on them. When I try to, the MMC crashes with the following error logged in the application event log:
The description for Event ID 999 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
An unexpected error caused a failure for process 'mmc'. Restart the DPM process 'mmc'.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>0</Seq><TimeCreated>9/2/2012 3:46:36 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>ArgumentOutOfRangeException</ExceptionType><ExceptionMessage>Index
was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index</ExceptionMessage><ExceptionDetails>System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.ThrowHelper.ThrowArgumentOutOfRangeException()
at System.Collections.Generic.List`1.get_Item(Int32 index)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.CreateRecoveryPointDialog.InitializeForTapeRecoveryPoint()
at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table
As this appears to be a problem with just these protection groups (I am able to take tape backups of others without a problem) I decided I would try to remove the group, retain the data and re-create it. When I right click on the group and attempt
to stop protection of the group or modify the protection group, the MMC crashes with the same error above.
One protection group is backing up and Exchange 2010 Archive Database, the other, Lync 2010 SQL Databases (and covers 2 different servers).
Does anybody have any suggestions on how I can get these protection groups behaving as they should and working again?
DPM is 2012 RTM running on a Windows Server 2008 R2 SP1 Enterprise physical server. The servers being protected are running Windows Server 2008 R2 SP1 Standard, the Exchange one is virtual (running on Hyper-V), Lync, one physical, one virtual (also running
on Hyper-V).

Hi
First of all verify that below services are running and also check which user account is uses for running the DPM and SQL services.
DPM
DPM Replication Agent
SQLAgent$MS$DPM2007$
MSSQL$MS$DPM2007$
Virtual Disk Service
Volume Shadow Copy
Thanks and Regards Deepak

Error creating and modifying protection groups

When modifying or creating a new protection group I periodically get a DPM 945 event with this text:
<FatalServiceError><__System><ID>19</ID><Seq>27</Seq><TimeCreated>1/6/2012 4:54:22 AM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlException</ExceptionType><ExceptionMessage>Cannot
insert the value NULL into column 'owner_sid', table 'msdb.dbo.sysjobs'; column does not allow nulls. INSERT fails.
The statement has been terminated.</ExceptionMessage><ExceptionDetails>System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'owner_sid', table 'msdb.dbo.sysjobs'; column does not allow nulls. INSERT fails.
The error seems to have the following pattern:
1. I log on and launch the MMC. Modification of the protection group works.
2. Try to do a second modification and the error occurs.
3. Log out and log back in, relaunch the MMC and I can modify the protection group.
Seems like a bug?
Rob

In further testing with the Release Candidate...here is what is happening:
1. Any change to a protection group or creating a new one causes the error.
2. It does not happen the first time when modifying a protection group. Only subsequent modifications.
3. It happens with protection groups with and without Exchange, a change from my earlier statement.
Here are the event logs that are generated:
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 5 Schedules removed: 0 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>15</Seq><TimeCreated>1/20/2012 6:56:13 PM</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 0 Schedules removed: 10 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>1228</Seq><TimeCreated>1/20/2012 7:40:18 PM</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
The description for Event ID 945 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Unable to connect to the DPM database because of a general database failure. Make sure that SQL Server is running and that it is configured correctly.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>1236</Seq><TimeCreated>1/20/2012 7:40:29 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlException</ExceptionType><ExceptionMessage>Cannot
insert the value NULL into column 'owner_sid', table 'msdb.dbo.sysjobs'; column does not allow nulls. INSERT fails.
The statement has been terminated.</ExceptionMessage><ExceptionDetails>System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'owner_sid', table 'msdb.dbo.sysjobs'; column does not allow nulls. INSERT fails.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SqlAgentHelper.AddJob(String jobName, String jobOwner, String CategoryName)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SqlAgentHelper.RegisterSchedule(Schedule schedule)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.RegisterScheduleHelper.PerformDBOperation()
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.RegisterScheduleHelper.Execute(SqlContext sqlContext)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SchedulerImpl.Register(SqlContext sqlContext, String scheduleXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Intent.ScheduleTranslator.CreateScheduleDefinition(String jobDefinitionId, RecurrenceType[] scheduleRecurrances)
at Microsoft.Internal.EnterpriseStorage.Dls.Intent.ScheduleTranslator.ScheduleJobDefinition(JobTranslator jobTranslator)
at Microsoft.Internal.EnterpriseStorage.Dls.Intent.ScheduleTranslator.ScheduleReplicationJob(JobTranslator jobTranslator, BackupTypeType backupType, Boolean scheduleOnlyForApplications)
at Microsoft.Internal.EnterpriseStorage.Dls.Intent.ScheduleTranslator.ScheduleFullDeltaReplicationJobForApp()
at Microsoft.Internal.EnterpriseStorage.Dls.Intent.ProtectedGroupTranslator.UpdateJobDefinitions()
at Microsoft.Internal.EnterpriseStorage.Dls.Intent.ProtectedGroupTranslator.TranslateGroup(IMCatalogType IMCatalogXmlPassed, String intentCatalogXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CIntentServices.ConfigureProtectedGroup(UInt16* bstrIMCatalogXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CCoreServices.ConfigureProtectedGroup(CCoreServices* , UInt16* bstrIMCatalogXml, tagSAFEARRAY** exceptionResult)</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table
Rob

WebLogic 10.3.2 console hangs when attempting configuration changes

Hi,
I am running:
WebLogic 10.3.2
Windows XP x86 64bit
JRockit JVM 1.6.0
I have done a fresh install (twice) and whenever I start the main admin console and try to create a new server or deployment it just sits there and hangs. There are no other servers setup just the defualt AdminServer in development mode. The only other variable is that I have versions 9.2 & 10.3.0 of WL installed - in seperate home locations however so they should not conflict.
Here's a thread dump........
============
1.
============
"Main Thread" waiting for lock weblogic.t3.srvr.T3Srvr@1265e12 WAITING
     java.lang.Object.wait(Native Method)
     java.lang.Object.wait(Object.java:485)
     weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:849)
     weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:465)
     weblogic.Server.main(Server.java:67)
"(Signal Handler)" RUNNABLE
null
"(OC Main Thread)" RUNNABLE
null
"(Code Generation Thread 1)" RUNNABLE
null
"(Code Optimization Thread 1)" RUNNABLE
null
"(VM Periodic Task)" RUNNABLE
null
"(Attach Listener)" RUNNABLE
null
"Finalizer" RUNNABLE
     jrockit.memory.Finalizer.waitForFinalizees(Native Method)
     jrockit.memory.Finalizer.access$700(Finalizer.java:12)
     jrockit.memory.Finalizer$4.run(Finalizer.java:189)
     java.lang.Thread.run(Thread.java:619)
"Reference Handler" RUNNABLE
     java.lang.ref.Reference.waitForActivatedQueue(Native Method)
     java.lang.ref.Reference.access$100(Reference.java:11)
     java.lang.ref.Reference$ReferenceHandler.run(Reference.java:82)
"(Sensor Event Thread)" RUNNABLE
null
"VM JFR Buffer Thread" RUNNABLE native
null
"Timer-0" waiting for lock java.util.TaskQueue@12618b6 WAITING
     java.lang.Object.wait(Native Method)
     java.lang.Object.wait(Object.java:485)
     java.util.TimerThread.mainLoop(Timer.java:483)
     java.util.TimerThread.run(Timer.java:462)
"Timer-1" waiting for lock java.util.TaskQueue@1410fe0 TIMED_WAITING
     java.lang.Object.wait(Native Method)
     java.util.TimerThread.mainLoop(Timer.java:509)
     java.util.TimerThread.run(Timer.java:462)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE
     sun.management.ThreadImpl.getThreadInfo0(Native Method)
     sun.management.ThreadImpl.getThreadInfo(ThreadImpl.java:145)
     weblogic.platform.VM15.threadDumpAsString(VM15.java:22)
     weblogic.platform.VM.threadDumpAsString(VM.java:137)
     weblogic.t3.srvr.JVMRuntime.getThreadStackDump(JVMRuntime.java:111)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:597)
     weblogic.management.jmx.modelmbean.WLSModelMBean.getAttribute(WLSModelMBean.java:525)
     com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
     com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:298)
     weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:273)
     weblogic.management.mbeanservers.domainruntime.internal.ManagedMBeanServerConnection.getAttribute(ManagedMBeanServerConnection.java:304)
     weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.getAttribute(FederatedMBeanServerInterceptor.java:308)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:298)
     weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:273)
     weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
     weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
     javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1404)
     javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
     javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
     javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
     javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
     javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
     weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
     weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
     javax.management.remote.rmi.RMIConnectionImpl_1032_WLStub.getAttribute(Unknown Source)
     javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getAttribute(RMIConnector.java:878)
     javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:263)
     weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:504)
     weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
     $Proxy73.getThreadStackDump(Unknown Source)
     com.bea.console.actions.core.server.ThreadStackDumpAction.getCollection(ThreadStackDumpAction.java:61)
     com.bea.console.actions.BaseTableAction.display(BaseTableAction.java:46)
     com.bea.console.actions.BaseDisplayAction.execute(BaseDisplayAction.java:92)
     org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
     org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
     org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
     org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
     org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
     com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
     org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
     org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
     org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
     org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
     com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
     com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
     com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
     com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
     com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
     com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
     com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
     com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
     com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
     com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
     com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
     com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
     com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
     com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
     weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
     weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
"weblogic.time.TimeEventGenerator" waiting for lock weblogic.time.common.internal.TimeTable@7bc04d TIMED_WAITING
     java.lang.Object.wait(Native Method)
     weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
     weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
     java.lang.Thread.run(Thread.java:619)
"weblogic.timers.TimerThread" waiting for lock weblogic.timers.internal.TimerThread@7af929 TIMED_WAITING
     java.lang.Object.wait(Native Method)
     weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
"[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@141130f WAITING
     java.lang.Object.wait(Native Method)
     java.lang.Object.wait(Object.java:485)
     weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"Thread-7" waiting for lock java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@141149d WAITING
     sun.misc.Unsafe.park(Native Method)
     java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
     java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
     java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:399)
     weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
     weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
     weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
     weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" RUNNABLE
     weblogic.work.ExecuteThread.notifyRequest(ExecuteThread.java:145)
     weblogic.work.RequestManager.executeIt(RequestManager.java:247)
     weblogic.work.SelfTuningWorkManagerImpl.scheduleInternal(SelfTuningWorkManagerImpl.java:166)
     weblogic.work.SelfTuningWorkManagerImpl.schedule(SelfTuningWorkManagerImpl.java:149)
     weblogic.work.WorkManagerLifecycleImpl.schedule(WorkManagerLifecycleImpl.java:156)
     weblogic.servlet.internal.MuxableSocketHTTP.resolveServletContext(MuxableSocketHTTP.java:406)
     weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:347)
     weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" RUNNABLE native
     weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
     weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
     weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" RUNNABLE native
     weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
     weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
     weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"VDE Transaction Processor Thread" waiting for lock [email protected] WAITING
     java.lang.Object.wait(Native Method)
     java.lang.Object.wait(Object.java:485)
     com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
     com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
"DoSManager" TIMED_WAITING
     java.lang.Thread.sleep(Native Method)
     com.octetstring.vde.DoSManager.run(DoSManager.java:433)
"Thread-11" waiting for lock java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@734dcd WAITING
     sun.misc.Unsafe.park(Native Method)
     java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
     java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
     java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:399)
     weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
     weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
     weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
     weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"weblogic.GCMonitor" waiting for lock java.lang.ref.ReferenceQueue$Lock@11a9ae0 TIMED_WAITING
     java.lang.Object.wait(Native Method)
     java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
     weblogic.platform.GCMonitorThread.waitForNotification(GCMonitorThread.java:88)
     weblogic.platform.GCMonitorThread.run(GCMonitorThread.java:64)
"DynamicListenThread[Default]" RUNNABLE native
     java.net.PlainSocketImpl.socketAccept(Native Method)
     java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
     java.net.ServerSocket.implAccept(ServerSocket.java:453)
     java.net.ServerSocket.accept(ServerSocket.java:421)
     weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:38)
     weblogic.server.channels.DynamicListenThread$SocketAccepter.accept(DynamicListenThread.java:528)
     weblogic.server.channels.DynamicListenThread$SocketAccepter.access$200(DynamicListenThread.java:420)
     weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:171)
     java.lang.Thread.run(Thread.java:619)
"DynamicListenThread[Default[1]]" RUNNABLE native
     java.net.PlainSocketImpl.socketAccept(Native Method)
     java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
     java.net.ServerSocket.implAccept(ServerSocket.java:453)
     java.net.ServerSocket.accept(ServerSocket.java:421)
     weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:38)
     weblogic.server.channels.DynamicListenThread$SocketAccepter.accept(DynamicListenThread.java:528)
     weblogic.server.channels.DynamicListenThread$SocketAccepter.access$200(DynamicListenThread.java:420)
     weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:171)
     java.lang.Thread.run(Thread.java:619)
"[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@125148e WAITING
     java.lang.Object.wait(Native Method)
     java.lang.Object.wait(Object.java:485)
     weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@11a9d86 WAITING
     java.lang.Object.wait(Native Method)
     java.lang.Object.wait(Object.java:485)
     weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Thanks for any help in advance...

Hi thanks for your reply. Very strangely without making any changes I left it alone for an hour or so and it seems to be ok after that!

Question: Why does DVDSP "hang: when adding subtitles

I'm having a real problem adding subtitles to my 3.7 GB project. It's all built and I was in the process of adding subtitles to the 1 hr 30 minute film. Yesterday it worked fine, copying and pasting from a text application into subtitles I'm making as I go, but today it's been a nightmare.
I find after only two or there additions, I suddenly get the spinning wheel "program not responding" and have to force quit. I reopen the project and if I'm lucky I can add two or three subtitles, saving each time, before I get the"spinning wheel of frustration".
(problem posting this message so this is a repost)
I have no idea what's causing it. But it DVDSP at this stage of my project definitely doesn't like subtitles being edited, moved or played. It becomes unstable and then hangs.
I've downloaded the latest security update incase that helped, turned off the clock, (old habit) Nothing works.
A project that was going to take two hours to finish looks like taking two days now! I'll plod on but I could really do with some help.
Any ideas?
G5 Mac OS X (10.3.9) DVD studi pro 3.0.2

You may need to reset your User Agent; it is showing that you are using Firefox 3.0.5. The User Agent can sometimes be changed by something you download/install.
*See --> https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent
*See --> http://en.wikipedia.org/wiki/User_Agent
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

AS console hangs when trying export business rules

Hi,
when i try to export business rules from administration services console it hangs and task manager shows admincon.exe 100% cpu usage.
Need help.
Thanks,
Timur

Hi Timur,
I ran into the same trouble. I could get 5-7 rules at a time exported just fine. but more than that it would just run and run for hours.
One option is perhaps increase your java heap sizes for EAS.
Another option which we did was to change security to be by project instead of by rule and this made our exports much faster
This was with Hyperion 9.2.1

DPM Console hangs when adding servers by Modify Protection Group

Similar Messages

Maybe you are looking for