DPM Error ID 1005

Once removed the physical disk of the machine while attempting to start the service DPM have the following message: 
Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program
msdpm.exe because of this error.
Program: msdpm.exe
File: 
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 01328890
Disk type: 0
We put the disc again but not resovel: (
Please help us to be able to thank!

I found the error, the machine for incredible apparently was removed from AD, after putting it in the field again put Began service I received another error opening the console saying that the DPM service was not running. 
Follow these step and everything worked: 
http://technet.microsoft.com/en-us/library/ff934577.aspx
tks

Similar Messages

  • CR XI R2: Database logon failed. Database Vendor Error Code: 1005

    Hi:
    I am trying to incorporate Crystal Reports XI R2 with in-house application - Windows platform, Oracle9i, Websphere Studio Application Development 5.1, and JVM 1.4.2 with OCI8 driver and JNDI connection.
    I am not getting any error while running it in the project where I first implemented.  If I import a EAR file from that project and deploy it in another project and run it, I am getting error in the new project as follows:
    [10/23/08 18:43:11:843 IST] 40994099 SystemOut     O ERROR - JRCAgent4 detected an exception: Database logon failed. Database Vendor Error Code: 1005
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase.<init>(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException.throwReportSDKLogonException(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
          at    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
          at    at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
          at    at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
    [10/23/08 18:43:27:234 IST] 40994099 SystemOut     O ERROR - JRCAgent4 detected an exception: Some parameters are missing values
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at java.lang.Throwable.<init>(Throwable.java)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase.<init>(Unknown Source)
          at    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException.throwReportSDKParameterFieldException(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
          at    at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
          at    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
          at    at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
    [10/23/08 18:43:28:359 IST] 40994099 SystemErr     R Exception at EPFPageFactory.getPage: java.lang.Exception: Error in EPFImapgeObjectInstancesBase.getInstanceProperties: null epfImage.
    Any help or suggestions would be highly appreciated.
    thanks,
    Prakash

    I suspect it is probably just a WSAD configuration issue.  If you have simply moved the EAR from one project to another, it might be missing some libraries or the some of the libraries may have been corrupted in the move, or it might be a problem with the build path.  Try deleting and readding the JRC libraries to the project.  If you are deploying to the test server within WSAD, try creating a new instance of it and deploying the project on the new instance.

  • Database logon failed.Database Vendor Error Code:1005(ReportSDKLogonExcep.)

    Hi all,
               I have suffering this error, when I am running my application in IBM Application Server 6. Basically this errors are throughing, when I running the report(which is contains some sub report). But non-sub reports are running fine.  Kindly requested to all, plz help me.
    my documentation...
    1. WASD 5.1.1
    2. Oracle 9i
    3. CR XI R 2
    4. Application connected with Crystal Report by JDBC-JNDI.
    5. My all reports  developed  with CR 10.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Database logon failed. Database Vendor Error Code: 1005---- Error code:-2147467259 Error code name:failed
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException.throwReportSDKLogonException(Unknown Source)
         at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
         at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
    Thanks & Regards,
    Sanjay Biswal

    Hi Ted Ueda,
           In my application, I have connected with Crystal report by JDBC/JNDI.
    now, I give all information about my application. plz follws.
    First :
    Database Type: JDBC(JNDI)
    JDBC Connection : True
    Connection URL : jdbc:oracle:oci8:@<service name>
    Database Classname : oracle.jdbc.driver.OracleDriver
    Service : <service name>
    OS Authentication : False
    JDBC Connection String : !oracle.jdbc.driver.OracleDriver!jdbc:oracle:oci8:/@<service name>
    User ID : <user name>
    Second :
          Some coding are giving, by which Crystal Report accessing Login information from JSP page.
    ConnectionInfos oConnectionInfos= new ConnectionInfos();
    ConnectionInfo oConnectionInfo = new ConnectionInfo();
    oConnectionInfos.setUserName(<user name>);
    oConnectionInfos.setPassword(<password>);
    oConnectionInfo .add(oConnectionInfos);
    CrystalReportViewer oCrystalReportViewer= new CrystalReportViewer();
    oCrystalReportViewer.setReportSource(reportSource);
    oCrystalReportViewer.setDatabaseLogonInfos(connInfos);
    Third :
               ojdbc14.jar files haveing in lib floder.
    This login information in my application. PLz give suggection.
    Thanks & Regards,
    Sanjay Biswal
    Edited by: Sanjay Biswal on Oct 31, 2008 9:56 AM

  • Error message 1005 on Safari

    When ever I try to post to a topic, or even sometimes change pages on my web-site, I have a screen come up with the error message 1005 come up.
    It doesn't really give me any place to report this message to, but tells me to report it with the number 1005.
    I then refresh the page and it goes ahead and loads usually.
    Can I change the settings to resolve this issue. I am not real saavy on that so I'd need step by step to do it.
    My husbands G-4 power book is doing the same thing. He says he has to refresh each time he goes to another page on our forum.
    Our web guy is totally unfamilier with Mac. so we don't know if it is an issue with the web-site software and Mac or not. No one else is experiencing this.
    Thanks so much!
    JulieJones

    This appears to be an error associated with MS Exchange Servers.
    If this is the case, then I believe the server administrators need to install an updated service pack. I don't think there's anything that can be done on the client (user) side.

  • Error NSURLErrorDomain -1005

    I am experiencing problems the last days in 10.4.7. I'm getting the Error NSURLErrorDomain -1005 errors the pages just won't load.
    The same pages fail to load in IE and firefox.
    Please help

    I do not understand why you did not get one reply, I have the same issue also.

  • Error NSURLE-error domain 1005

    I am operating off Alltell for my internet hook up and am trying to load Apple software updates. Before a subject is finished I get the following error message. Error NSURLE error domain-1005 make sure you can connect to the internet. This is while the Alltell hookup is connected and working. Any suggestions?

    Are you using Software Update? if so try getting them at...
    http://www.apple.com/support/downloads/
    Also, what are your ping times to apple,com?

  • Recovery disks displaying error code 1005.

    just installed a new hard drive, old one blue screened. when installing recovery disks, at 20% progress, an error code 1005 appears. press ok, then system starts again, yet same thing happens each time. not sure what is happening, nor how to fix problem. is it the disk, the new hard drive or ???

    Scroll down on the page and get>> Bootable CD  and>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here.
    Once created, boot from it. Delete any hdd partitions, create one and format. Next try booting from Recovery again.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • A networking error has occurred: Error NSURLErrorDomain -1005 (-1005).

    Tiger 10,4,10 6 wks old, new Mac user. Believed I had a hacker, Genius Bar disconnected bluetooth and Wifi. 35 pass erase, reinstallation. While in the process of updating, everything updated (at least 7 items) EXCEPT iLife Support version 8.1 which gave me this error:
    "A networking error has occurred: Error NSURLErrorDomain -1005 (-1005). Make sure you can connect to the Internet, then try again."
    I have tried numerous times, still get this message. Any information?

    Welcome to Apple Discussions!
    I have gotten that error numerous times both with my iBook and with my MBP. I connect using the internal modem on the iBook and the external modem on the MBP using dial up. I have always just assumed it was a problem with the telephone line but I don't really know. I just keep trying and eventually I get a successful download. But I am curious about this too.

  • Update Rollup 8 for System Center 2012 SPM - DPM Error

    Hi,
    I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
    MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
    Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
    I see there is a forum article for dpm 2012 Update Rollup 3  could not be installed, however nothing for Update 8.
    Is the fix the same?
    Thanks
    Simon

    Hi,
    I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
    MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
    Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
    I see there is a forum article for dpm 2012 Update Rollup 3  could not be installed, however nothing for Update 8.
    Is the fix the same?
    Thanks
    Simon
    Facing Exact same issue. Below is log:
    MSI (s) (80:84) [00:37:39:482]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2991995' could not be installed. Error code 1603. Additional information is available in the log
    file C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2991995.log.
    === Logging stopped: 3/9/2015  0:37:39 ===
    MSI (s) (80:84) [00:37:39:482]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
    Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 1729 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:497]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.

  • DPM Error 372

    I have the following error on a secondary DPM server.
    Protection agent version: 4.2.1254.0
    Error: Data Protection Manager Error ID: 372
     The agent operation failed because DPM detected a more recent version of the DPM protection agent (version
    4.2.1217.0) on server1.domain.local.
    Recommended action: Upgrade the DPM server to 4.2.1217.0 or install the protection agent of 4.2.1254.0 on server1.domain.local
    My Primary DPM server is on 2012 R2 UR1.
    My Secondary DPM server is on 2012 R2 UR3.
    Is DPM saying that I should upgrade my secondary server to an earlier version?
    Is DPM unaware of what is newer and what is older?
    Is QA busy with other more pressing critical issues, like how to build and bill for DPM 2015 instead of fixing what they've already collected revenue for?
    I checked this post:
    http://social.technet.microsoft.com/Forums/en-US/14cbd01d-b25a-45fa-ac25-c8cd3551d6d9/dpm-server-version-and-agents-incorrect?forum=dataprotectionmanager
    Doesn't seem to apply.
    58B8CC50-B79A-42F1-92A7-23EB52F9CDFE 3BD8F112-AFA6-4C6F-97F5-3471C8E4A535 DPM RA Update v4.2.1217.0 1 4 2 1217 0 Agents\RA\4.2.1217.0\i386\1033 DPMProtectionAgent_KB2904687.msp REBOOT=ReallySupress INSTALLDPMFILTER=0
    58B8CC50-B79A-42F1-92A7-23EB52F9CDFE 3BD8F112-AFA6-4C6F-97F5-3471C8E4A535 DPM RA Update v4.2.1217.0 2 4 2 1217 0 Agents\RA\4.2.1217.0\amd64\1033 DPMProtectionAgent_KB2904687.msp REBOOT=ReallySupress INSTALLDPMFILTER=0
    E0359AAC-5CA3-4569-BC3D-26D64F624C3E 347420DC-3935-4042-A58B-5CA9F791C603 DPM RA Update v4.1.3417.0 1 4 1 3417 0 Agents\RA\4.1.3417.0\i386\1033 DPMProtectionAgent_KB2877075.msp REBOOT=ReallySupress INSTALLDPMFILTER=0
    E0359AAC-5CA3-4569-BC3D-26D64F624C3E 347420DC-3935-4042-A58B-5CA9F791C603 DPM RA Update v4.1.3417.0 2 4 1 3417 0 Agents\RA\4.1.3417.0\amd64\1033 DPMProtectionAgent_KB2877075.msp REBOOT=ReallySupress INSTALLDPMFILTER=0
    8842293D-852D-488F-9F78-54BEAB90E387 347420DC-3935-4042-A58B-5CA9F791C603 DPM RA Update v4.1.3426.0 1 4 1 3426 0 Agents\RA\4.1.3426.0\i386\1033 DPMProtectionAgent_KB2904723.msp REBOOT=ReallySupress INSTALLDPMFILTER=0
    INSTALLDPMFLTRONPATCH=0
    8842293D-852D-488F-9F78-54BEAB90E387 347420DC-3935-4042-A58B-5CA9F791C603 DPM RA Update v4.1.3426.0 2 4 1 3426 0 Agents\RA\4.1.3426.0\amd64\1033 DPMProtectionAgent_KB2904723.msp REBOOT=ReallySupress INSTALLDPMFILTER=0
    INSTALLDPMFLTRONPATCH=0
    -=Chris

    Hi,
    Besides the obvious math problem, It appears that the secondary DPM server is not differentiating the Primary DPM server from a normal protected server, so as you correctly pointed out the message makes little sense.
    I will make the product group aware so they can work on fixing the message.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • DPM error

    I use system center 2012 R2 DPM. I get the following error DPM does not have sufficient storage space available on the recovery point volume to create new recovery points. (ID 214). I in creased the replica volume and the recovery volume but i still get
    the same error. I also did change the recovery point to 4 instead of 5 .. still getting the same error. Does anyone have a solution for this or does that mean i have to add more storage space. thank you. my unlocated space is 9 GB and Total space used 
    is 10 TB.

    Hi,
    Have a look at the formulas in the following TechNet-article to calculate how much allocated diskspace your protected datasources will need for its Replica and Recovery-Point volumes:
    https://technet.microsoft.com/en-us/library/bb795684.aspx?f=255&MSPPError=-2147217396
    Kind Regards
    Markus 

  • Application Error 1000, 1002, 1005, 1024, 5007,11500 & 11311

    Any help with any or all of these problems would be greatly appreciated...
    Thank you for your review ahead of time...
    + System
    - Provider
    [ Name] Application Error
    - EventID 1005
    [ Qualifiers] 49152
    Level 2
    Task 100
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2008-04-27T11:19:25.000Z
    EventRecordID 101445
    Channel Application
    Computer owner-PC
    Security
    - EventData
    C:\Windows\Fonts\JI-Chided.ttf
    Acrobat Distiller
    C000009C
    3
    + System
    - Provider
    [ Name] Application Error
    - EventID 1000
    [ Qualifiers] 0
    Level 2
    Task 100
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2008-04-27T01:34:56.000Z
    EventRecordID 101342
    Channel Application
    Computer owner-PC
    Security
    - EventData
    AcroDist.exe
    8.0.0.456
    453c6dff
    AcroDistDLL.dll
    8.0.0.456
    453c6df8
    c0000006
    00242138
    16f4
    01c8a806d8f87541
    + System
    - Provider
    [ Name] MsiInstaller
    - EventID 1024
    [ Qualifiers] 0
    Level 2
    Task 0
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2008-04-24T19:46:48.000Z
    EventRecordID 99863
    Channel Application
    Computer owner-PC
    - Security
    [ UserID] S-1-5-21-929786392-3332467027-646626929-1000
    - EventData
    Adobe Acrobat 8 Professional
    {AC76BA86-A660-0000-2550-7A8C40000812}
    1642
    (NULL)
    (NULL)
    7B41433736424138362D313033332D303030302D373736302D3030303030303030303030337D207B414337364 24138362D413636302D303030302D323535302D3741384334303030303831327D2031363432
    + System
    - Provider
    [ Name] Application Hang
    - EventID 1002
    [ Qualifiers] 0
    Level 2
    Task 101
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2008-04-24T19:48:34.000Z
    EventRecordID 99870
    Channel Application
    Computer owner-PC
    Security
    - EventData
    AcroTray.exe
    8.0.456.0
    bc0
    01c8a6403667eb8d
    16
    55006E006B006E006F0077006E0000000000
    + System
    - Provider
    [ Name] MsiInstaller
    - EventID 11311
    [ Qualifiers] 0
    Level 2
    Task 0
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2008-04-26T17:22:53.000Z
    EventRecordID 100920
    Channel Application
    Computer owner-PC
    - Security
    [ UserID] S-1-5-21-929786392-3332467027-646626929-1000
    - EventData
    Product: Adobe Acrobat 8 Professional -- Error 1311.Source file not found(cabinet): C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data1.cab. Verify that the file exists and that you can access it.
    (NULL)
    (NULL)
    (NULL)
    (NULL)
    7B41433736424138362D313033332D303030302D373736302D3030303030303030303030337D
    + System
    - Provider
    [ Name] MsiInstaller
    - EventID 11500
    [ Qualifiers] 0
    Level 2
    Task 0
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2008-04-27T01:40:23.000Z
    EventRecordID 101355
    Channel Application
    Computer owner-PC
    - Security
    [ UserID] S-1-5-21-929786392-3332467027-646626929-1000
    - EventData
    Product: Adobe Acrobat 8 Professional -- Error 1500.Another installation is in progress. You must complete that installation before continuing this one.
    (NULL)
    (NULL)
    (NULL)
    (NULL)
    7B41433736424138362D313033332D303030302D373736302D3030303030303030303030337D
    My email is [email protected] if you have a advice or help..
    Like take this computer out behind the barn and shoot it I am happy to take it.. Thank you, JW

    Hi,
      I am also facing the same problem.Can you suggest the solution? as well as the formula you used.
    Regards,
    Karthik

  • Windows Server 2003 R2 Backup with Hyper-V in DPM

    Hello,
    I am trying to backup multiple Windows Server 2003 R2 VMs on Hyper-V (Windows Server 2012 R2) with DPM.
    When I try to this I get the following errors:
    On the Hyper-V Host:
    Source: VSS ID:8229
    A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error.  If the backup process is retried,
    the error is likely to reoccur.
    . Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
    Operation:
       PrepareForSnapshot Event
    Context:
       Execution Context: Writer
       Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
       Writer Name: Microsoft Hyper-V VSS Writer
       Writer Instance ID: {0b5be050-91e2-41a6-9207-414f1291f975}
       Command Line: C:\Windows\system32\vmms.exe
       Process ID: 5312
    Source: Hyper-V-VMMS ID: 18014
    Checkpoint operation for 'VMName' was cancelled. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
    Source: Hyper-V-VMMS ID: 18012
    Checkpoint operation for 'VMName' failed. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
    Source: Hyper-V-VMMS ID: 10150
    Could not create backup checkpoint for virtual machine 'VMName': Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
    Source: Hyper-V-Worker ID: 3280
    'VMName' could not initiate a checkpoint operation: Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
    Source: Hyper-V-VMMS ID: 16010
    The operation failed.
    The Output of vssadmin list writers on the Hyper-V Host looks like this:
    Writer name: 'Microsoft Hyper-V VSS Writer'
       Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
       Writer Instance Id: {0b5be050-91e2-41a6-9207-414f1291f975}
       State: [8] Failed
       Last error: Non-retryable error
    In the Windows Server 2003 R2 VM there are no errors in the eventlog.
    Only the information, that VSS is started and stopped after a while.
    When I do a Backup with ntbackup of in the VM everything runs fine.
    When I create a checkpoint with Hyper-V everything runs fine, too.
    The integration services are up to date and get-vmintegrationservice -vmname VMName shows everything is enabled and OK.
    On the Hyper-V host there are 13 VMs. 3 of them are running Windows Server 2003 R2 and 2 of them are showing this error. It seems to be no general problem with Windows Server 2003 R2 then.
    I tried the backup on a different Hyper-V host with no success.
    How can I narrow down the cause of this error?
    Thanks.
    greets,
    torsten

    Thank you to everyone in this thread!
    After digging through VSS and Hyper-V dead-ends, the solution above worked for me in a W2012 R2 environment.
    I only had this problem trying to back up W2012 R2 Hyper-V VMs stored on a CSV, hosted on a W2012 R2 Host Cluster, backing up from a Host node.  I could back up from within the guests fine.  Both Windows Server Backup and DPM 2012 R2
    gave VSS errors on the cluster hosts. 
    In fact Windows Server Backup complains with 80780189 it won't back up an application with files on a CSV, which is a common cluster configuration.  This is an example of another caveat in a minefield of MS caveats buried in fine print which often negates
    configurations touted by MS Marketing, things which sound great on a sell sheet, but in practice are impractical or just not production-ready because of these restrictions.
    Disabled Backup in Integration Services, performed an offline back up from DPM 2012 R2 (which did briefly affect serving the workloads on the VM), which succeeded, and then re-enabled Backup in Integration Services.  DPM then continued to
    sync successfully after that for a day.  However, this problem returned after a period of heavy DPM backup activity.  So I redistributed backups through various Protection Groups to spread the DPM load over a longer period and this seems to
    have solved this problem.
    In general I had lots of problems installing, configuring, and now operating DPM, so the experience has not been smooth, but most of the problems have now been solved.  I find you have to "baby" this product and not push it too hard,
    otherwise things start breaking.
    Thanks again everyone!
    DPM Error ID 30111  0x800423F4
    DPM-EM Event ID 3106

  • Error when installing RAC on windows 2000

    Hi,
    I'm installing Oracle 9i(9.0.1.1.1 EE) RAC for the first time. It has been an interesting experience,
    with many bumps in the road. But now I'm stuck.
    I have installed the 9i EE software, but when I try to create a database ( using DBCA), I get an error :
    PRKR-1005 : adding of cluster database cludb configuration failed, PRKC-1018 : Error getting coordinator node
    The error occurs after I have finished configurating, and the actual database creation starts.
    I did get another error earlier : PRKR-1028 "raw device \\.\srvcfg is invalid, [HINT: initialize raw device by using
    'srvconfig' tool]
    That error disappeared after running srvconfig -init.
    I have restarted the Oracle GSD services on both machines, but I still get the same error.
    The OS is Windows 2000 Advanced Server, running on a Compaq Cluster.
    Br,
    Stefan

    For more information about it:
    Real Application Clusters Administration Contents / Search / Index / PDF
    Real Application Clusters Concepts Contents / Search / Index / PDF
    Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
    Real Application Clusters Documentation Online Roadmap Contents / Search / /
    Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
    Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
    Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
    http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
    Joel Pérez

  • DPM couldn't find valid recovery points for VM listed as having numerous recovery points when writing to tape

    I'm seeing the following events when DPM tries writing to tape:
    Log Name:      DPM Alerts
    Source:        DPM-EM
    Date:          15/02/2014 12:01:07
    Event ID:      3311
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      <backup server FQDN>
    Description:
    The back up to tape job failed for the following reason: (ID: 3311)
    Backup of Non VSS Datasource Writer on <PROD server FQDN> cannot be completed. DPM could not find a valid recovery point on disk. (ID: 30126)
    All VMs on each of the affected servers have recovery points but
    When performing disk to disk to tape backups (d2D2T), tape backups will fail if a new disk based backup is not created before the next scheduled tape backup.  DPM always makes tape backups by mounting last successful disk based recovery point. 
    This is so we don't need to transfer data over the network since that most recent data is already on the DPM server. Look to see why the disk recovery points are failing and correct that to prevent tape backups from failing.
    http://social.technet.microsoft.com/Forums/en-US/a9b80780-2a5c-43bc-8111-ee35db56f359/backup-tapes-dpm-2012?forum=dpmtapebackuprecovery
    Is this the only time that recovery points are verified? Can I do a manual verification of recovery points? I'm concerned that some of the backups I have may be corrupt. If that's the case I need a way of finding out which ones are affected and a way to
    resolve the issue. Unfortunately I've not found much,the DPM error code isn't even listed in the official documentation. http://technet.microsoft.com/en-us/library/hh859159.aspx Other threads where people have seen this issue seem to be for older versions
    of DPM (I'm using the latest 2012 R2 fully updated).

    Hi,
    I've been having some difficulty running the Powershell command, see below. I've been using this for guidance http://technet.microsoft.com/en-us/library/hh881586%28v=sc.20%29.aspx where am I going wrong here?
    $Pg = Get-DPMProtectionGroup
    -DPMServerName <dpm server name here>
    $Ds = Get-DPMDatasource
    -ProtectionGroup $Pg[1]
    New-DPMRecoveryPoint
    -Datasource $Ds
    -Disk -DiskRecoveryPointOption -WithDataIntegrityCheck
    PS C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\bin> New-DPMRecovery
    Point -Datasource $Ds -Disk -DiskRecoveryPointOption -WithDataIntegrityCheck
    New-DPMRecoveryPoint : Missing an argument for parameter
    'DiskRecoveryPointOption'. Specify a parameter of type 'Microsoft.Internal.Ente
    rpriseStorage.Dls.EngineUICommon.EngineConstants.DbEnums+CreateDiskRecoveryPoin
    tOption' and try again.
    At line:1 char:44
    + New-DPMRecoveryPoint -Datasource $Ds -Disk -DiskRecoveryPointOption
    -WithDataInt ...
    +                                           
    ~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo         
    : InvalidArgument: (:) [New-DPMRecoveryPoint], Par
       ameterBindingException
        + FullyQualifiedErrorId : MissingArgument,Microsoft.Internal.EnterpriseSto
       rage.Dls.UI.Cmdlet.ProtectionCmdLets.CreateRecoveryPoint
    PS C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\bin>

Maybe you are looking for

  • Subscription and push notifications - Name or password is incorrect (repeat logon)

    Hi , while trying to execute the Push notification scenario,while executing I facing error as Incorrect user name and password, but user name and password are same . By following the below thread i found that i have to assign S_BGRFC role to the user

  • Any iPhone 6 user(s) suffered a panic crash and reboot?

    This phone keeps springboard crash almost once a day, but I hits panic cause the iPhone reboot in these two days, my phone is running iOS 8.0 which is SANDISK TLC NAND, it's a 128 GB version, Does anyone have same problems? Hardware Model:      iPhon

  • Outlook 2003 Folders

    I use Outlook on PC for managing a number of email accounts (NOT Gmail) 5 of which are also linked to my 8520. I do not have Outlook on the BB. The email accounts are directly linked. In practice a new email arrives on the BB before it appears in Out

  • Please solve my query

    Sir,  I want to do the certification In Exchange server 2013. I am doing the preparation for 70-341 and 70-342 codes from these dumps: Microsoft.PracticeTest.70-341.v2013-08-21.by.Mo.105q  but there are many wrong answers in this Dump. Please give me

  • Firefox opens but doesn't load any page after clean installation

    I uninstalled firefox (incl. preferences and profiles) and installed ff 3.6.13. At first launch and starting up, the ff icon appears in the dock but then the icon is replaced by another ff icon in a kind of never seen icon-replacement-animation in th