DPM_SQL_PROTECT not cleared after backup
Hello,
I have numerous SQL instance that are protected by different DPM 2012R2 protection groups.
The DPM_SQL_PROTECT folder has a few XYZ.ldf folders in there which contain several text files that contain the transaction logs at the point of synchronisation.
Should DPM be deleting/clearing these out of there?
Hi,
The DPM_SQL_PROTECT will contain the last sql log dump from the last DPM synchronization. The size of the log will fluctuate throughout the day based on SQL activity. I agree that if you are protecting lots of active databases that the
left over log(s) could cause you problems if you are storage space challenged.
You can redirect the DPM_SQL_PROTECT using mountpoint to another volume. See the following BLOG:
Optimizations in protecting SQL databases with high churn by DPM
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
LM13: Verification field not cleared after [Enter] key
Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi FungHi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a® -
Note 916654 - LM13: Verification field not cleared after [Enter] key
Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi FungThanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.
-
*** The contents wrote with the auto compiler. (Korean -> English)
*** Meaning of the writing could not be delivered smoothly.
From Adobe Reader 8.1.2 Application Printing quality Is not clearly after Adobe Acrobat 8.1.2 Professional updating.
To previously there was not a problem to printing quality.
Like this problem gets why?
--- System
OS : Mac OS X 10.5.2 Leopard
App : Adobe Reader 8.1.2
Printer : HP Deskjet 9800 (Driver : HP web download v9.7 lastest or Leopard include)
App : Preview.app (Leopard Default Viewer) - Printng quality is good. But is not the Adobe Reader.
Adobe Acrobat 8.1.2 Professional update : 2008-02-20 (Korea)Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik -
IOS 7 app store update list does not clear after updates have been installed
iOS 7 app store update list does not clear after updates have been installed
Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck. -
Pricing errors are not cleared after fixing the master data
Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
MaddyHi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy -
Server Does not start after backup complition
Dear All,
We are facing following problem some times after backup completion.
Our Setup is : SAP ECC 6, Oracle 10g, HP-UX 11.31.
We are scheduling the whole database offline + archive log backup during night.
After completion of backup the SAP does not start. I have checked the following things.
1. Database is started : OK.
2. SAP related services at O/S level : OK
3. Listener is OK
4. No startup log generated related to SAP
But I am not able to connect to SAP thru SAP GUI.
If I tried to start SAP using startsap it will not respond for long time. Even I have tried to startsap after shutting down database, kill all SAP related services at O/S level. But startsap doesn't respond.
When I restart the server, after that I am able to start SAP.
Is there any memory fragmentation related problem ?
Before some time same thing is happened with our production server, but at that time I have deleted Archivelog files manually before tacking backup. In this case if I take backup "whole database offline + archive log " then server doesn't start. At that time also I have to restart the server. So the Problem is identified.
But in this case i.e on our Quality Server not able to trace out problem.
Thanks in Advance,
NiravHi,
Yes the problem is related to memory. I think during the backup memory is allocated but not release after completion of database backup.
in case of archive log backup what option your are using means are you using save and delete option or other.
In the case of the production server archive log backup you to use to the option save and delete.
Please also check wheather core file getting gernerated should be deleted frquently from work folder.
Thanks & Regards,
Vidyadhar K -
SAP Does not start after backup complition
Dear All,
Since last two times when we put Offline whole database + Redolog
backup, after complition of backup SAP Does not start.
I have tried to start SAP Manually, but didn't start.
To start SAP we have to restart the SERVER.
Attached please find backup log.
Thanks and Regards,
NiravThanks you all for quick response.
Backup log is pasted at end of message. Wile you please guide me where dev_disp log is located.
I am taking backup through DB13.
When I got this problem. Database was not started. But at O/S level SMON is running. Shutdown normal or transactional was not working. I have to shutdown abort. and start the database.
SAP services are also running at O/S level.
I have doubt about work process.
Thanks
Nirav
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beamxrbx.aft 2009-05-06 04.00.05
BR0484I BRBACKUP log file: /oracle/PRD/sapbackup/beamxrbx.aft
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
BR0101I Parameters
Name Value
oracle_sid PRD
oracle_home /oracle/PRD/102_64
oracle_profile /oracle/PRD/102_64/dbs/initPRD.ora
sapdata_home /oracle/PRD
sap_profile /oracle/PRD/102_64/dbs/initPRD.sap
backup_mode ALL
backup_type offline_force
backup_dev_type tape
compress hardware
tape_copy_cmd dd
cpio_flags -ovB
cpio_in_flags -iuvB
dd_flags obs=64k bs=64k
dd_in_flags ibs=64k bs=64k
rewind mt -f $ rew
rewind_offline mt -f $ offl
tape_size 102400.000 MB
tape_address /dev/rmt/0mn
tape_address_rew /dev/rmt/0m
volume_backup PRDB01,PRDB02,PRDB03,PRDB04,PRDB05,PRDB06,PRDB07,PRDB08,PRDB09,PRDB10,
PRDB11,PRDB12,PRDB13,PRDB14,PRDB15,PRDB16,PRDB17,PRDB18,PRDB19,PRDB20,
PRDB21,PRDB22,PRDB23,PRDB24,PRDB25,PRDB26,PRDB27,PRDB28,PRDB29,PRDB30
expir_period 29
tape_use_count 100
exec_parallel 0
system_info prdadm/oraprd rlsdbi HP-UX B.11.31 U ia64
oracle_info PRD 10.2.0.2.0 8192 7547 46814166 rlsdbi UTF8 UTF8
sap_info 700 SAPSR3 0002LK0003PRD0011Q21439814270013NetWeaver_ORA
make_info hpia64 OCI_102 Apr 21 2007
command_line brbackup -u / -jid ALGOF20090506040000 -c force -t offline_force -m all -p initPRD.sap -a -c force -p initPRD.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815598 ResetId: 674927195
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_1/sr3.data1 2097160192 4 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_2/sr3.data2 2097160192 5 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_3/sr3.data3 2097160192 6 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_4/sr3.data4 2097160192 7 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_5/sr3.data5 2097160192 8 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_10/sr3.data10 2097160192 13 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_6/sr3.data6 2097160192 9 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_7/sr3.data7 2097160192 10 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_8/sr3.data8 2097160192 11 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_9/sr3.data9 2097160192 12 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_11/sr3.data11 2097160192 14 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_12/sr3.data12 2097160192 15 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_13/sr3.data13 2097160192
BR0143I Backup type: offline_force
BR0113I Files will be compressed by hardware
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: PRDB25
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name PRDB25 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.07
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0242I Scratch volume in device /dev/rmt/0mn will be renamed to PRDB25
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.08
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
#SAVED.... sr3700.data7 PRDB25/43
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.17
BR0063I 40 of 62 files processed - 82240.312 MB of 120066.277 MB done
BR0204I Percentage done: 68.50%, estimated end time: 4:29
BR0001I **********************************________________
BR0202I Saving /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
#SAVED.... sr3700.data8 PRDB25/44
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.42
BR0063I 41 of 62 files processed - 84640.320 MB of 120066.277 MB done
BR0204I Percentage done: 70.49%, estimated end time: 4:29
BR0001I ***********************************_______________
BR0202I Saving /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
#SAVED.... sr3700.data10 PRDB25/45
#FILE..... /oracle/PRD/sapdata1/system_1/system01.dat
#SAVED.... system01.dat PRDB25/60
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.07
BR0063I 57 of 62 files processed - 119850.445 MB of 120066.277 MB done
BR0204I Percentage done: 99.82%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g11m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g11m1.dbf
#SAVED.... log_g11m1.dbf PRDB25/61
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.14
BR0063I 58 of 62 files processed - 119900.446 MB of 120066.277 MB done
BR0204I Percentage done: 99.86%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g12m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g12m1.dbf
#SAVED.... log_g12m1.dbf PRDB25/62
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.22
BR0063I 59 of 62 files processed - 119950.447 MB of 120066.277 MB done
BR0204I Percentage done: 99.90%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g13m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g13m1.dbf
#SAVED.... log_g13m1.dbf PRDB25/63
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.29
BR0063I 60 of 62 files processed - 120000.448 MB of 120066.277 MB done
BR0204I Percentage done: 99.95%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g14m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g14m1.dbf
#SAVED.... log_g14m1.dbf PRDB25/64
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.36
BR0063I 61 of 62 files processed - 120050.449 MB of 120066.277 MB done
BR0204I Percentage done: 99.99%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
#SAVED.... cntlrPRD.dbf PRDB25/65
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.42
BR0063I 62 of 62 files processed - 120066.277 MB of 120066.277 MB done
BR0204I Percentage done: 100.00%, estimated end time: 4:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.44
BR0304I Starting and opening database instance PRD ...
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.10
BR0305I Start and open of database instance PRD successful
BR0117I ARCHIVE LOG LIST after backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815880 ResetId: 674927195
BR0056I End of database backup: beamxrbx.aft 2009-05-06 04.28.11
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0291I BRARCHIVE (action ID aeamxrbx) will be started with options '+beamxrbx.aft,42106018475,PRDB25,62 -jid ALGOF20090506040000 -d tape -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2009-05-06 04.31.42
BR0292I Execution of BRARCHIVE (action ID aeamxrbx) finished with return code 0 -
Ipad speakers not clear after ios 7 update!
i update my ipad 2 wifi to ios 7 on sep. 18..... and after that update my ipad speakers are not clear at all....pls help.... will rate it for sure........any help will be appreciated!
I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
Usually those things fixes it. If not, then it could be the port. -
Quality of pdf files not clear after conversion (Adobe Acrobat 9.0 Std)
Hi,
I am using Adobe Acrobat 9.0 standard and my computer is running on Windows XP SP3 (with Office 2003 SP3). Everything used to works fine until my laptop crashed and I need to re-install everything.
Now when I want to convert PowerPoint presentation files (with pictures, diagrams), the pdf version becomes not clear and the fonts are smudged.
I have re-install Adobe twice but ended up with the same problems. My colleague is able to convert the same PowerPoint using CutePDF without any problem.
Please help. Thanks.You may want to try the following steps:
open a pdf file
click Edit
click Preference
in Resolution section: select Use system setting: 144 pixels/inch
in Rendering section: select For Monitor, select Smooth line art, select Smooth images, select Use local fonts, select Use page cache
in Page Content and Information section: select Use smooth zooming, select Use smooth scrolling
click OK -
Reasons for Time Capsule not ejecting after backup?
Running 2010 17" MBP, 8GB, upgraded to Lion.
After backups, the TC drive stopped auto ejecting sometime last night. I can eject it manually, and as far as I can tell backups are still occurring normally.
After doing some searching I tried using the privacy settings to prevent Spotlight from indexing the TC data folder where the backup sparsebundles go, and rebooting. Didn't help.
Anyone have some ideas on what might be causing this, and what I can do to correct it?
Thanks in advance!Okay. I guess any mysterious occurrance is potentially going to have an equally mysterious resolution. It just started ejecting the TC drive normally after backups. I've done nothing, changed nothing--it just started working again.
I think I'll have a drink now. Thanks anyway! -
Copied words into browser do not clear after closing session
When I go to a site that needs a password, I copy it from Last Pass into my browser. Then I enter my username and paste the password. Then when done, I sign off and close the page. I can go to another page that may want information. I fill it out and the previous password is still there and the only way I can get rid of it is to copy something new into the browser. Then, I have that new word stuck in my browsers. Whatever word is in there will only go away wen the computer is restarted. This can be just a password or any words that were copied and then pasted.
It used to be when I left a site that required a password, for example, when the page was closed, the word was gone instantly. I remember going back to a site that I need to do additional work on and when I clicked on the paste, it was greyed out or it would come up blank. That has how it has always worked until the last update. Have checked all security, cookie, privacy settings and it is all the same. Have tied every combination of settings and nothing will let the word or words clear out after I close Firefox. All browsing history ans history is cleared each time, but I have no control over the info copied into the browser, except to copy in something like 10 Xs, but then that stays. Have worked on this for a week and it really has me bugged. Last Pass told me it is a Firefox problem?My Last Pass usually fills in everything just fine and there is no need to copy anything, it automatically autofills. On one credit card site, It will not let me use autofill, so I enter my username, look up my 75 digit password and copy it and then paste it to the site. It used to be that when I left that site and had to comeback to it for some reason, the pasted password was gone. I just thought this was a security feature. If you are saying that the actions I have described or completely normal and safe, I will just quit worrying about it. Thanks.
-
Time Capsule Disk Not Unmounting After Backup
I had been using a TC for time machine backups. The TC was connected by ethernet cable to an AEBS that I used for my internet connection. The TC was used for the backups only. I was having problems with the AEBS so for a few days I reconfigured the TC to to provide my wifi connection from my modem but turned off time machine backups until I sorted things out. I've now replaced the AEBS with a new one and have gone back to connecting the TC to it by ethernet cable and using it only for the backups (wireless mode off). The backups are happening without any issues but for some reason after the backup is complete the hard drive/disk image that mounts on my desktop during the backup does not unmount. I can manually do this in Finder or by dragging it to the trash.
Is there some setting for this or have I messed something up when I reconfigured the TC for backups only?I had the same problem; timecapusule disk could not mount. I got this message when I wanted to make a backup for the first time on a brand new computer (MacBook Pro).
I found out that the computer had no computername (prefrences -> sharing). When I entered a computer name the backup started.
I think the computer did not have a name because all settings were copied using the Migration Tool. I think the computer name is not copied as it is a new computer. It is left empty! The computer should get at least a default name.
Apple -> please fix this! -
Encrypt local store data not cleared after unstalling a program
After an AIR programmed is uninstalled, the EncryptLocalStore
data it saves are not removed. Is this a bug, a feature?
My application stores a user's username/password into
EncryptLocalStore for "auto login next time". After the program is
uninstalled, and then re-installed, the newly installed program
will automatically log the last user in, which is not a desired
feature in this context.It is not a bug.
-ted -
Wired memory does not clear after safe boot
My iMac started freezing up about a month ago when I was watching a video and would only boot up in safe mode. I noticed in Activity Monitor that 5.30 GB of memory was "wired" (out of 8 GB total). I was able to boot normally after cleaning the caches.
The problem has gotten worse and the iMac now freezes after a short while of playing video. As of now I can ONLY boot up in safe mode and Activity Monitor always shows 5.30 GB of wired memory, however no processes are using more than 1% of CPU (other than Activity Monitor itself).
Today I downloaded and tried a couple of memory cleaner apps just so I could reboot normally, but the wired memory (5.30 GB) won't budge. After doing some research I learned about the kextstat command to see what memory is being wired. This is the process using the most memory (assuming that longer numbers are the largest):
71 0 0xffffff7f80e98000 0x1aa000 0x1aa000 com.apple.kext.AMD4800Controller (8.1.2) <70 69 10 9 5 4 3 1>
Also, here are the last 2 lines from the SYSTEM LOG just before the freeze (each line was repeated 7 times):
7/2/13 12:44:23.325 PM coreaudiod[272]: Enabled automatic stack shots because audio IO is inactive
7/2/13 12:45:21.280 PM coreaudiod[272]: Disabled automatic stack shots because audio IO is active
Any suggested next steps in troubleshooting are appreciated.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in {,/S*}/L*/E*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
Maybe you are looking for
-
Issues with Zen Xtra (30GB) PlaysForSure firmw
Apologies if this subject has been covered, but I haven't found any coverage of the particular problems I have with the firmware upgrade (2.0.03). My main beef is to do with the compatibility with the firmware upgrade and Creative MediaSource. Before
-
Web application not able to connect to Oracle 10g
I have been facing an issue with my Web application past 2 days wherein I am not able to connect to oracle database. The error is receive when I compile my project : OCIEnvCreate failed with return code -1 but error message text was not available. I
-
Need Alert to triger if we Approver modify the Queue.
My Necessity. I need to check my change request queue for every 30 min, To check if any of the incident as got approved from my manager or not. Instead of this procedure. I need to get Alert to my inbox if my Approver has made any changed in my speci
-
How can I get viber in my ipad
how can I get viber in my iPad?
-
hi can u reply me for the below post Actually iam using a FF connection manger to read the csv file .. with the row delimiter to {CR}{LF}. Suddenly in looping through the files package got failed because it cant able to read the csv file Again i cha