DPS and PostgreSQL - problem with add/modify

Hi All,
Did anyone try to combine DPS and PostgreSQL database? I am trying to do this and everything works OK except add and modify operations from LDAP client.
E.g. When I try to modify entry I got following error:
[29/Jun/2009:15:27:20 +0200] - PROFILE - INFO - conn=19 assigned to connection handler cn=anonymous, cn=connection handlers, cn=config
[29/Jun/2009:15:27:20 +0200] - SERVER_OP - INFO - conn=19 op=0 MODIFY dn="uid=6886,dc=example,dc=com" jdbcServer=test-jsource sqlStatement="UPDATE persons SET persons.name='Yoko1' WHERE persons.id = 6886"
[29/Jun/2009:15:27:20 +0200] - SERVER_OP - INFO - conn=19 op=0 MODIFY RESPONSE err=1 msg="java.lang.Exception: org.postgresql.util.PSQLException: ERROR: column "persons" of relation "persons" does not exist" jdbcServer=test-jsource
[29/Jun/2009:15:27:20 +0200] - OPERATION - INFO - conn=19 op=0 MODIFY RESPONSE err=1 msg="java.lang.Exception: org.postgresql.util.PSQLException: ERROR: column "persons" of relation "persons" does not exist" etime=0
The exception comes from Postgresql database, because it doesn't accept including table's name in the specification of a target column. For example (from Postgresql documentation): UPDATE tab SET tab.col = 1 is invalid, should be UPDATE tab set col =1.
Is there a way to workaround this somehow?
I use DPS 6.3 and Postgres DB 8.3.7.
Thanks,
Greg

FYI, the list of RDBMS tested with DPS is available at [http://docs.sun.com/app/docs/doc/820-2759/additional-software?l=en&a=view&q=mySQL|http://docs.sun.com/app/docs/doc/820-2759/additional-software?l=en&a=view&q=mySQL]

Similar Messages

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have Iphoon 4 and ihave problem with speaker what i have to do?

I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
I have got my IPhoon from London U.K. Now i'm in Saudia Arabia

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have ipad 2 and facing problem with programs swtching off

I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

Just purchased Wndows Vista and having problems with the port for Palm 125

I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop. I get an error message saying: "Com1 not available" What do I do?
Thanks,
Frustrated
Post relates to: Palm m125
This question was solved.
View Solution.

Sorry, that didn't work. I get no drop down menu from the Hot Sync Manager for the Serial Port. What comes up often is: "The selected port, COM1, is not available at this time. Hot Sync Manager will open the port when it becomes available."
Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port? Just a thought. Thanks for your help.
Post relates to: Palm m125

Scanner and fax problems with the Officejet 7410 AIO

Hi
I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
Thanks
Bye
balubeto

Hi balubeto,
Welcome to the HP Forums!
I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
I would recommend the following:
Run the HP Print and Scan Doctor, to diagnose the issue.
Uninstall the software. Uninstalling the Printer Software.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Power and Sync problems with Zen Vision:M

)Power and Sync problems with Zen Vision:MX Lately, my Vision M is having problems that when I plug it into the USB port on any PC to charge it, it lights up for a moment and then goes blank.
When I unplug it and reseat the usb cable, nothing happens. When I try to turn it on, it's dead. This happens even though it's not fully depleted of battery energy.
Pressing the reset button does not do anything. The only thing that I've found that will work is to open it up and unplug the battery. But even that is starting to not work.
This doesn't happen every time I use it, but it is happening quite a bit. It's gotten to the point today that I can't even charge the battery at all.
Any suggestions? I don't think it's the battery, as it does charge when I don't have these issues, but I'm not really positi've of that either.

The connector on the motherboard check it . It may need to be resoldered. The last time I ran into those symptoms that was the solution.

Having a problem with Add-ons I did not install and now can't uninstall.

Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
PLUG-INS-
Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
Mozilla Default Plug In
(THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
Itunes Application Detector 1.0.1.1
Itunes Detector Plug-In
Wacom Dynamic Link Library 1.1.0.3
Wacom Dynamic Link Library
Windows Presentation Foundation 3.5.30729.1
Windows presentation foundation (WPF) plug-in for Mozilla Browsers
EXTENSIONS_ Java Console 6.0.23
Java Console 6.0.20
(Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!

For camera problem try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
I do not understand what you mean about your update problem

Start-up / shut-down (and other) problems with ZFS over iSCSI

Hi,
I've had a limited time in which to try some concepts on an evaluation x4500 server. This is unfortunately my last day, so by the time anyone can reply I will probably not be able to to further tests, but maybe someone will be able to reproduce the issues.
I'm using the evaluation server to export some iSCSI targets, and I'm connecting to them from my laptop, which has a fresh installation of SXDE 01/08. I was able to attach to the targets with
iscsiadm add static-config \
iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-943d8861c9e8,192.168.15.62
iscsiadm add static-config \
iqn.1986-03.com.sun:02:371c6fe7-f0c8-e02c-c865-baef90fb71ce,192.168.15.62
iscsiadm add static-config \
iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e-afe60e13db23,192.168.15.62
iscsiadm modify discovery -s enableThis made the appropriate entries appear in /dev/dsk so I could then set up a simple zpool and zfs filesystem with:
zpool create -m none dPool c3t010000144FA70C1400002A0047C2BF73d0 \
c3t010000144FA70C1400002A0047C2BF81d0 c3t010000144FA70C1400002A0047C2BF8Bd0
zfs create -o mountpoint=/data -o sharenfs=on dPool/dataThe general concept I'm testing is having a ZFS-based server using an IP SAN as a growable source of storage, and making the data available to clients over NFS/CIFS or other services. In principle this solution should also allow failover to another server, since all the ZFS data and metadata is in the IP SAN, not on the server. Although not done in this example it should also be possible to run raidz across multiple iSCSI disk arrays. However, it's not been a bed of roses. I've had a lot of errors in dmesg like the following, which I think are causing zfs/zpool commands to stall at times:
Feb 28 14:30:39 F4060 iscsi: [ID 866572 kern.warning] WARNING: iscsi connection(ffffff014f6b6b78) protocol error - received an unsupported opcode:0x41
Feb 28 14:30:41 F4060 iscsi: [ID 158826 kern.warning] WARNING: iscsi connection(10) login failed - failed to receive login response
Feb 28 14:30:41 F4060 scsi_vhci: [ID 734749 kern.warning] WARNING: vhci_scsi_reset 0x1
Feb 28 14:30:41 F4060 iscsi: [ID 339442 kern.notice] NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBUF or SO_SNDBUF
Feb 28 14:30:41 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(13) unable to connect to target iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e-afe60e13db23
Feb 28 14:30:41 F4060 iscsi: [ID 339442 kern.notice] NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBUF or SO_SNDBUF
Feb 28 14:30:41 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(7) unable to connect to target iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-943d8861c9e8Does anyone know why a Solaris iSCSI target would send an unsupported opcode (0x41) to a Solaris iSCSI initiator? Surely they should be talking the same language!
The main problems however are with shutdown and start-up. On occasions, I suspect that the ordering of ZFS, iSCSI and network services gets a bit out of sync. On one occasion the laptop even refused to complete the shutdown because it was reporting a continuous stream of console messages like
Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(13) unable to connect to target iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e
-afe60e13db23
Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(10) unable to connect to target iqn.1986-03.com.sun:02:371c6fe7-f0c8-e02c-c865
-baef90fb71ce
Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(7) unable to connect to target iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-
943d8861c9e8I also get these on start-up, where it looks like ZFS tries to load the zpool configuration before iSCSI has found the disks, and even worse, iSCSI is starting up before nwamd has time to do its network auto-magic, and complains that the devices are unavailable.
If these problems sorted themselves out after everything came up, I wouldn't really mind some temporary complaints in the log file, but what I get after a reboot is a working zpool but an unmounted ZFS filesystem! Here is what I have today:
bash-3.2# zpool status
pool: dPool
state: ONLINE
scrub: scrub completed with 0 errors on Thu Feb 28 14:33:43 2008
config:
        NAME                                     STATE     READ WRITE CKSUM
        dPool                                    ONLINE       0     0     0
          c3t010000144FA70C1400002A0047C2BF73d0 ONLINE       0     0     0
          c3t010000144FA70C1400002A0047C2BF81d0 ONLINE       0     0     0
          c3t010000144FA70C1400002A0047C2BF8Bd0 ONLINE       0     0     0
errors: No known data errors
bash-3.2# zfs list
NAME         USED AVAIL REFER MOUNTPOINT
dPool        480M 28.9G     1K none
dPool/data   480M 28.9G   480M /dataThis all looks fine, and you can see that I was even able to scrub the pool data with no problems. But where are the 480MB of data I have put in the /data mountpoint:
bash-3.2# ls /data
bash-3.2# df -h /data
Filesystem             size   used avail capacity Mounted on
/dev/dsk/c1d0s0         15G   4.4G    11G    30%    /As you can see, /data is unmounted, causing df to revert to the / filesystem containing the empty /data mountpoint, instead of showing the zpool mount.
Since zfs is supposed to take care of its own mounts rather than using vfstab, I can't use "mount /data" to force this to mount. The only workaround I've found is to export and import the zpool. Then I get the filesystem to reappear:
bash-3.2# df -h /data
Filesystem             size   used avail capacity Mounted on
dPool/data              29G   480M    29G     2%    /dataDoes anyone know if these are known issues with snv_79b, and is there a fix available or in the works?
TIA,
Graham

EasyE, Welcome to the discussion area!
(a) Call Apple and get your iMac G5 fixed since it is in the repair extension group. Don't waste your time doing anything else.
(b) This area is for discussing the iMac G4. Since you have an iMac G5 in the future you should post in the iMac G5 discussion area.

Cut and Paste problem with links in DW

Anyone have a clue as to why this is happening.....
when I cut and paste a complex link -- DW seems to add some characters.... see below....
Original Link
http://spie.org/app/program/index.cfm?fuseaction=exhibitordetail&exhibitorid=20189&meeting _id=169
Dreamweaver's modified link.... it's adding amp after the & sign....
http://spie.org/app/program/index.cfm?fuseaction=exhibitordetail&exhibitorid=20189&meeting _id=169
Simple links stay the same... but this got me in a little hot water with a client when I sent out an email from constant contact....
Thanks
-C
oh... couple things.... I'm working on:
OS 10.6.2 (MAC)
CS4

"it's adding amp after the & sign"
It's not actually adding "amp".
DW is assisting you by encoding the "&" (which validators assume to be a broken HTML entity since they start with "&") and replacing it with the correct form of "&" so that browsers can understand the URL.
See
http://htmlhelp.com/tools/validator/problems.html#amp

DPS and PostgreSQL - problem with add/modify

Similar Messages

Maybe you are looking for