DPS builder custom html page not loaded when you first open the application
I created app with some customs html pages.
I tick the "Auto launch" and when the first time I run the application, the page does not load.
If you go to another page and return to - it is loaded. If you close the application and open it again - all loaded. But when you first open the application page does not load.
What could be the problem?
I created app with some customs html pages.
I tick the "Auto launch" and when the first time I run the application, the page does not load.
If you go to another page and return to - it is loaded. If you close the application and open it again - all loaded. But when you first open the application page does not load.
What could be the problem?
Similar Messages
-
unable to launch firefox after I upgraded firefox
I see you are using a PPC Mac with OSX 10.5.8.
Either you can use the last release from Mozilla worked on PPC which is 3.6.*.
The current 3.6.22 is at http://www.mozilla.org/en-US/firefox/all-older.html
Or use a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html
As of Firefox 4.0 and newer a '''Intel''' Mac and OSX 10.5+ is required. -
Recently downloaded Mac OS X Mavericks and Safari has become noticeably less responsive; slow to load web pages. Also, when Safari is open, the Finder randomly comes to the front. Any ideas?
In fact, I am runing some plug-ins: ClickToPlugin (Flash blocker), Collusion and Disconnect.
There is quite a history of new versions of Safari breaking third-party plug-ins/extensions becasue the plug developer did not have an updated version available by the time the new Safari version dropped. What you report--worked fne before but won't now--is exactly what history says happens in such a case.
First, turn off all third-party stuff and see if Safari smooths out. Alternatively, create a new user account and, from there, test Safari in its native state with nothing added. That is a good diagnostic to see if the issue is a plug or extension.
If either of those helps, check for updates to the add-ons. If the developer is slow in reacting to the updated Safari version, (not unheard of), stop using that extension until an update is available. -
I have PowerBook G4, running 10.5.8. Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application “Firefox” because it is not supported on this architecture. Thanks for the help.
Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported -
For some reason, when my Macbook Pro starts up now, all of the MS Office applications open. This was not happening when I first purchased the laptop, and I never added these apps to the startup menu. How do I remove these apps from startup?
By default Mac apps do not close when you close the window you were working in. Unlike in Windows when you click the top right X icon in any program is closes the window and the program shuts down. On Mac OS X clicking the X in the top left hand corner only closes that windows and leave the program running in the background. If they are left open and you reboot they will restart with the system and load a window for them.
-
I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.
-
Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?
Problem now resolved as I upgraded to Snow Leopard 10.6. Seems App Store doesn't like anything previous to 10.6.
-
I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
How to view the settings of the sequence (info that appears when you first open sequence)?
Hi I would like to ask how to view the current settings of the sequence i am already working in, the same information that appears when you first open a new sequence
eg.
General
Editing mode: QuickTime DV PAL
Timebase: 25.00fps
Video Settings
Frame size: 720h 576v (1.4587)
Frame rate: 25.00 frames/second
Pixel Aspect Ratio: D1/DV PAL Widescreen 16:9 (1.4587)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Audio Tracks:
Audio 1: Standard
Audio 2: Standard
Audio 3: Standard
I have forgotten which setting I chose for my current sequence and have tried to look under project settings and also sequence settings
but the info that you see when you first open a new sequence doesn't show, especially if the editing mode is PAL or NTSC etc.
How can I find out this information that my current sequence is on?
ThanksThanks for your reply
Is there a way to see what preset I chose when i first chose the sequence? As under 'sequence settings' i don't see this info.
e.g
DV PAL "Widescreen 48kHz"
As i do not remember and fear it may ruin the HD video I am currently editing.
Thanks -
HT5639 Why do several applications open when I first open the internet?
Why do several pages open up when I first open the internet?
in windows? in bootcamp? in osx?
-
i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?
I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here. -
When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?
Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
You cannot open the application iTunes (11.1.4) because it is not supported on this type of Mac
After updating iTunes to 11.1.4 as suggested by automatic updates I get the message:
"You cannot open the application iTunes because it is not supported on this type of Mac"
Why did it let me do the update then?
How do I undo the uodate to iTunes?
This is on a Mac Mini running OSX 10.6.8 with 1GB memWhat processor do you have?
If it's a CoreDuo (as opposed to a Core2Duo), then you ave a 32 bit OS, and no... 11.1.4 won't run on a 32 bit OS.
=Downgrading from iTunes 11 to iTunes 10.7=
Back up your computer first, in case the wrong things happen.
Replace the iTunes 11 application with iTunes 10.7. I can't provide details on this since I do not have a newer computer. With mine it is very simple but I believe on newer computers iTunes has been integrated into the operating system. On mine I just go to my applications folder and drag iTunes to the trash. See below for possible suggestions on how to remove.
https://discussions.apple.com/message/20431349
Get iTunes 10.7. Apple does not keep many old version up on its web site. I always keep an iTunes installer on my archive drive so I can have access to old versions . This one is hidden but it is on an official Apple site:
iTunes 10.7 for OS X http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
You will have to rescue your old iTunes library from your Previous Libraries folder and rename it iTunes Library.itl because a newer version of iTunes irreversibly updates your library file. See:
https://discussions.apple.com/mesage/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Other issues:
https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading -
what does this mean you cant open the application " read before install itunes" because it is not supported on this architecture
Where are you seeing this?
Which computer?
Which OS? iTunes comes preinstalled on all Macs. -
I get an error when trying to open "The application Creative Cloud can't be opened. -1712
I get an error when trying to open "The application Creative Cloud can't be opened. -1712
The application Install.app can't be opened. -1712
Maybe you are looking for
-
How do I get my hardware upgrade back?
I had a nightmare situationtoday. I told the salesperson at the Apple store I was going to pay cash, buthe charged debit, and instead of changing the payment option he just cancelledto phone to charge it again. HOWEVER when he went to charge it again
-
Oracle 9i database configuration assisstant not running
Hi All, My database is Oracle 9i.The configuration assisstant not running in this .can any body help? Reena
-
99% CPU on Front Row with Snow Leopard, possible workaround...
This might be helpful for some who have experienced this issue as well. It seems that Front Row will continue to work in the background when you exit from it using Apple - Q, but if you exit using the remote, holding down the Menu button for a couple
-
How to activate web cam on Satellite C660-C660D?
I cant get my webcam built in to work on Satellite C660D/C660. Do I need to switch it on or download a driver? Help
-
I am trying to create pdfs from multiple Indesign CS3 files. When I drop the files (or even just one) in distiller I get the following error that I can't figure out. All images are linked and all fonts are available. Adobe PDF Settings: /Library/App