DPS Issue: You do not have a compatible Digital Publishing Plug-in.

Issue: I have recently upgraded to inDesign 5.5 specifically to use the new DPS tools. I've download the DP tools (v.1.0) that you are directed to online as well as version 1.1.3 of the folio builder panel.
Still, I recieve the following error: You do not have a compatible Digital Publishing Plug-in.
I've tried deleting my Indesign preference files, in addition to performing the keyboard-shortcut to reset your inDesign prefs on app launch.
Specific details are as follows:
Mac OS Lion (10.7.1)
InDesign 7.5.1
DP tools v.1.0
Folio Panel Builder v.1.1.3
Any help that could be provided would be greatly appreciated.
Thanks,
Chad Holmes.

Are you sure you downloaded the proper version? There are plugins for CS5 as well as CS5.5.
Where, when are you seeing this error?
There is a dedicated forum for DPS. Please post follow-ups there.
Bob

Similar Messages

You do not have the compatible VGA hardware or driver to run youcam

I cant figure out how to fix youcam on my laptop. Everytime I try to open youcam It pops up with "you do not have the compatible VGA hardware or driver to run youcam". What information is needed to fix this problem and what do i need to do to fix it?

Hi bored55,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are getting the message in YouCam that" you do not have the compatible VGA hardware or driver to run YouCam".
If you check Device Manager, you should be able to locate the Webcam and then install or update a driver for it.
You can run HP Support Assistant to aid with HP updates and drivers.
Have you tried troubleshooting the device through Windows?
To assist you further I will require more information.
What exact model of HP notebook do you have? How Do I Find My Model Number or Product Number?
What Operating System are you running?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

15-r006TU Hp Notebook, You do not have the compatible VGA hardware or driver to run youcam

I recently purchased HP 15 R006TU Note book PC and installed Windows 7 Professional 32 bit on it. I installed all the recommended drivers for VGA but still find it difficult to run You cam on it and recieve an error message "You do not have compatible VGA hardware or drivers to run you cam". please suggest me the exact drivers to run you cam.

Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
If this doesnt help, provide the Hardware ID of the device and we would prove the drivers.
Help: http://www.wikihow.com/Find-Hardware-ID
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownneship from an account with administror privileges.
tt2

IPad 3 syncing issue on iOS6 - "You do not have the privilege to make changes"

I have updated my ipad 3 to iOS6 and now it is coming up with the following warning message when i try to sync "The iPad cannot be synced. You do not have the privilege to make changes" also it is not recognised wirelessly under devices, I have to connect with the usb cable.
I am having a similar issue on my iPhone 4s as well - this IS recognised wirelessly but has the saming warning message.
Both devices are updated to iOS6 and i am running iTunes 11.0.1
Any help or advice????
Thanks,

Finally managed to get this sorted, i noticed that it was at the point of the photos backing up i was getting the warning message so decided to try a few things,
What worked was holding down the option key and clicking on Aperture/iPhoto this gives you the option to select the library you want to choose from on your drive/external drive, i clicked the default one and reloaded Aperture.
Then i simply closed and re-opened itunes and it found the iPad wirelessly(still not sure why doing this on Aperture helped with this problem) then hit sync and everything worked OK.
I had changed nothing previously so unsure what started the issue whether it was iOS 6 or just an issue on my Mac but either way all works fine so i'm happy.

How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes?

How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes? I already went to the folder of iTunes inside the Finder and change all permissions to allow read and write... no improvement at all. Any help? thanks!

Hi! I just realized I have two folders called library, one is inside HD alongside with System and users, then I have also "library" inside users, some of the folders are apparently repeated, some are missing. And all the music is inside a folder called iTunes Music, inside Music, inside users. Now that I relaized some folders are repeated I applied to all related to iTumes r/w permission. But the annoying message keeps coming on.
And yes, I am using Leopard, 10.5.8.
Any ideas?

When trying to open itunes i'm receiving a message stating "this folder is on a locked disk or you do not have write permissions" Any idea what I need to do to get it working. The issue happened after I installed DJ Software

When trying to open itunes i'm receiving a message stating "this folder is on a locked disk or you do not have write permissions" Any idea what I need to do to get it working. The issue happened after I installed DJ Software

Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

You do not have compatible vga hardware or driver to run You cam

when i download & install cyberlink youcam software, massage shown at the end of installetion
You do not have compatible vga hardware or driver to run Youcam
what i do to resolve this problem, please suggest asap.
Thanks
pankaj kumar

Hi:
Did you install the graphics driver for your model?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134230-1&cc=us&dlc=en&lc=en...

You do not have compatible vga hardware driver run youcam

Dear !
I am facing the problem while opening the Youcam application kindly advise how to resolve,
PRODUCT NUMBER IS :J8B82PA#ACJ
Model: 15-ro74tu
The error is "you do not have compatible vga hardware driver run youcam"
and also i am unable to install the Graffic Drivers,please help me out.
Thanks in advance....
This question was solved.
View Solution.

Hi:
See if the Intel graphics driver directly from Intel works...First file listed is the auto install...
https://downloadcenter.intel.com/download/24596/Intel-Iris-and-HD-Graphics-Driver-for-Windows-7-8-8-...

Authorization Issues: Message EYE007: You do not have sufficient authoriza

Hi all,
We are facing issue regarding authorization. Details are -
We have info object Region (which has values like NORTH, SOUTH, EAST, WEST and CENTRAL).
Steps:
1. I made Region as Authorization Relevant.
2. Created Variable on Region and Processing type as Authorization (Multiple Single Values, Optional)
3. As per user's role we have created 5 Authorization analysis objects with respective to Region values.
If one user has access rights for north then, will assign North Role in BI. Similarly for others aslo it is working fine.
But, If I assign North and South Role for one particular User then it is giving error.
Error Message:
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
1478 ( ZDISTRICT )
1488 ( ZREGION )
Authorization Check Complete
Please help me.
Regards,

Hi,
If ZDISTRICT & ZREGION are not included in your selection you will get an authorization error. To avoid this error maintain value as : (Colon) in RSECADMIN for these objects.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/932b839c8019ade10000000a11466f/content.htm
hope it helps...
regards,
Raju

HT201269 I used iTunes to backup up my iPhone 4 version 7.0.6 bought a new iPhone 5 and when I connect the new phone I get "iTunes could not connect to this iPhone. You do not have permission." How do I fix this issue?

Itunes 11.1.5
Mac OS X 10.7.5
IPhone 4 7.0.6
IPhone 5 7.0.6
Ikeep getting this error when I attach the new phone. After it would not work I did a Icloud back up of my old phone and restored it on the new phone, but I have other music and apps on my Itunes that I would like the option to sync and I like to be able to backup my phone on my Mac. What do I need to do to get the new phone attached back to this itunes?
iTunes could not connect to this iPhone. You do not have permission.

Im having the same problem after installing ios7.1
Checked the usb status and it sees an iphone ( 4s ) attached,
Repaired disc permissions
updated and reset iphone
and itunes
reinstalled mavericks from scratch
phone alert saying " TRUST THIS COMPUTER?"
hit trust
same alert keeps appearing
again and again
itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
what the actual F*** is going on and can anybody help ??????

Windows 8 issue - Attempting to copy to disk "X" Failed. You do not have enough access privileges for this operation

Let me give you a quick rundown of my setup
I have a fresh copy of windows 8 64bit with a slave drive installed to handle alll my media.
Im logged in as admin and salve drive has all permissions marked as "allowed"
The error messege that occures when i go to add a new song to the itunes library (which also makes a copy in the music folder on the slave)
The Error reads as follows "Attempting to copy to disk "X" Failed. You do not have enough access privileges for this operation"
I have tried a uninstall followed by reboot and a fresh install but that made no difference...... Please help me.
_Kevin

You are showing problems with permissions on the drive. You need to either run iTunes as an administrator, or check to make sure that you are logged in with administrative priviledges on the computer. Despite having done it before, something has changed your permissions on the computer, has nothing to do with the phone.

Adobe 10, Windows 7 32 bit error message: You do not have priveledges to perform this command

In Windows 7 32 bit system Adobe X, latest version, results in this error message: You do not have privileges to perform this command. Windows trouble shooter indicates that the program is not compatible with my system settings. What needs to change?

I don't see an answer for this question - but I'm experiencing the same error on a Windows 7 SP1 machine. I've tried all the suggested steps here (uninstalled, reinstalled, removed Adobe Reader folder). Even installed recent v11 hoping that would allow me to open a PDF as the original problem exhibited itself on a v10.1.4 installation. This is a brand new machine running local administrator user. Shouldn't be a rights issue yet Adobe reports that I don't have privileges to run (open) Adobe reader.
I'd rather use the Adobe reader (rather than Foxit or another) but if I can't get it to install correctly I'm out of luck. Anyone get this issue resolved?
BTW: Tried to insert a picture of the error message dialogue but the Adobe picture uploader for this forum doesn't appear to work either...
Russ

Windows Vista Bonjour error "You do not have sufficient access..."

My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?

I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
Vista Control Panel > Hardware and Sound > Printers > Add a printer >
Add a network, wireless or Bluetooth printer >
The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname >
CHOOSE - Device type: Autodetect
INPUT - Hostname or IP address: "Time-Capsule"
(which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
SELECT - "Query the printer and automatically select the driver to use" >
Device Type > Standard | Generic Network Card > Install the printer driver* >
(*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
From there, it's just Next > Next > and choose to share printer, etc. to finish up.
Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
Best of luck to you.

My iPhone 4 has been saying You do not have permission to access the requested resource whenever I try to watch one of the episodes I bought from iTunes. It will not let me watch them and I don't know why.

A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.

Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase.

DPS Issue: You do not have a compatible Digital Publishing Plug-in.

Similar Messages

Maybe you are looking for