DPS loading article error

I keep getting error in DPS: Content generation error. Erroe: Unable to access the output directory. The directory is not writable, so the folio cannot be saved. Please help

Hiya, What i have found so far points towards a common issue that if the shared volume is mounted on the desktop then this can cause the error as adobe tries to write the temp cache file to the shared directory rather than locally. If you eject the shared drive and then try again you may not get the error. Also restarting the computer re-sets indesign so it works properly. I have been working off local servers since and it hasn't happened again. Hope this helps

Similar Messages

ITunes won't load without Error

I just loaded a new drive with a clean install of windows on a test machine I have and iTunes will load without error. It will start to import a CD but will then lock up or freeze no error. Also none of the 21 back up CD's I have or the 5 dvd's will work to recover my library. Something is seriously wrong with iTunes and it seems that Apple does not care.

After doing some trouble shooting I followed method 4 on this link as noted Can not install some updates or programs in a few other articles.
When I rebooted this time and attempted to launch iTunes nothing happened other than the icon becoming highlighted. I then checked both the widows task manager applications and the processes tab.
Applications
-Nothing running
Processes
-iTunes.exe
-iPodservice
-iTuneshelper.exe
-applemobildevice.
I attempted to end all these processes and reload itunes without any luck. Next I went into MSCONFIG and set it for selective startup. Under the services tab I removed Ipod Service and Apple Mobildevice from loading at startup and under the startup tab I removed iTuneshelper from loading.
After restarting and attempting to reload it is still not successful.
Any ideas to resolving this issue?

'Load Paper' error message even when paper is loaded in the front load tray

Load Paper Error message -
Printer type: HP OfficeJet 6500 Wireless All-in-One Printer
(possibly other HP printers as well)
This 'How-To' article will help you solve a 'Load Paper' error message even though there is paper in the front load tray. You can read this helpful article at http://mikeyates.com/wordpress/?cat=187
This could also help other HP printers with no easy access to the drop down type rollers located inside the printer.
Would appreciate any feedback if this worked for you or not.
Thanks
Mike

This is what I found: printer eventually wants to see color ink after running months without. Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean. Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point. Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error. Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure. (which you can get aroung by keep hitting OK and cancelling the alignment)! This totally cured by problem of load paper and alignment failure. Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

Unable to down load file error 1321?

Unable to down load file error 1321?
Error_Message

Hi grahamg,
Please see my response in your other post: I am unable to download Acrobat message reads Insuffient prileges to modify the file C:\ Program Files [ x 86] Adobe\ Acrobat 11.0\Acrobatwow_exe.
Best,
Sara

Unable to load report error

Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
Peter

Make sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Unable to load GUI error when trying to download newest flash player

I had deleted the older flash player , 10.0.42.34 and tried to download 10.0.45.2. Went to the adobe site, clicked the link for "get adobe flash player" from the ADOBE home page .
Got the "Unable to load GUI" error message, so I just went to the bottom of the download page and installed from this link here
click here to download (fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe)
Is that a legitimate way to download the flash player? I mean it put flash10e.ocx in C:\Windows\System32\macromed\Flash and in the manage add ons and in the add/remove programs version in Vista. Just want to make
fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
gave me the right and secure flashplayer download.
thanks

Hey habnots, like a lot of things in life, there is the hard way and the easy way. Your way just took longer:-)
Regards,
eidnolb

"Unable to load URL" error when importing VS2008 created WSDL

One of my developers created a simple web service in Visual Studio 2008 that queries a database on our SQL Server 2005. I can view the web service results in a web browser with no problems. I can also pull up the WSDL in the web browser with no problems (http://<ip address>/Service.asmx?WSDL). However, when I try to load WSDL into a Web Service Connection in Xcelsius 2008, I get the "Unable to load URL" error.
I've also tried to use the web service as a data source in Crystal Reports 2008, but I get another error:
Logon failed.
Details: Schema file is invalid
error: src-resolve: element 'schema@http://www.w3.org/2001/XMLSchema' not found
I've seen a post in which it looked like Crystal acknowledged this as a bug in the XML driver used by Crystal products, but it should be fixed in a service pack update. I've got the latest service packs and fix packs installed for both Xcelsius 2008 and Crystal Reports 2008.
I scanned the information being sent/returned to Xcelsius using Fiddler and it looks like the request is getting through and the actual WSDL file is being returned to Xcelsius, so it shouldn't be an authentication issue. It seems like Xcelsius doesn't like the WSDL file for some reason. However, it is automatically generated by Visual Studio 2008.
Any ideas as to how I can get Xcelsius to use this test web service?

Having the same issues here also.
I can see the wsdl file being accessed successfully in the web access log, but Xcelsius v5.3 return "unable to load URL"
Only thing I can guess is that the schema is "untyped"
So, nobody in SAP has a solution?

Plug-in load class error while running portalapp.xml file in NWDS7.0

hi,
im facing a problem in NWDS7.0 while running portalapp.xml file im getting error realted some plug-in load class error.
Even 3 times i have re-installed but still getting same error.
Please help me how to over come this. This is error im getting :
Please open this link with Firefox so that you can able to see error.
http://www.imageurlhost.com/images/jri5lj7lpftu23ejyye0_Error.jpg
Regards,
prasad.

Dear Prasad
Please right click on portalapp.xml > open with > check all the available editors.
Also restore default edition in NWDS. Go to windows > preference > Workbench OR Web editors > click on restore default and Apply and then Ok.
then close the NWDS and open it.
Hope it will helps
Best Regards
Arun Jaiswal

SQL*Loader-925: Error while parsing a cursor (via ocisq)

Receiving the following error message when trying to use SQLLoader (on NT) >>>
SQL*Loader-925: Error while parsing a cursor
(via ocisq)
ORA-00942: table or view does not exist
Trying to use the application for the first time, logon using userid for which sqlplus operates, and the table does exist under the user schema, as owner.
ctl and dat file are correct. Log file gives me no further detail of the errors.
Are there any configuration settings or something required for this app?
Thanks

Thanks Warren. I was concentrating more on the first line of the error.
You are right. The issue was of insufficient privileges. The table did not have all the necessary grants provided.

Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

Hi Folks,
Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
failed to load preferences error. During the upgrade the vpn connection get established, but once
i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
is able to connect for the first time. Its getting very painful. Any help from the support team will be
appreciated!

I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

[bug-report] AI CC for Mac got "loading plugin error" at startup

Enviornment: 2012 late Mac Mini, OSX 10.8.6( English )
Just fresh installed adobe illustrator cc for Mac(Simplified Chinese), which is got "loading plugin error" at startup, even update AI or reinstall it after using adobe cc clean tool.
Finally I found it will be solved by selecting default lanugauge (North America English) at installer. Then I changed my OSX language to S Chinese then installed S_Chinese version AI CC that works without problem.
So, it shows AI got some language compatiabitily bug which is not happen on PS and InDesign (I installed Simplified Chinese version of both them on my english OSX without error)
Plz fix it in next version. Thanks so much.

Can you give this a try, that is try using a seperate boss?
DECLARE_PMID(kClassIDSpace, kIDCStartupShutdownServiceBoss, kIDCPrefix + 10)
Class
                    kIDCStartupShutdownServiceBoss,
                    kInvalidClass,
                              // Implementation of IStartupShutdownService
                              IID_ISTARTUPSHUTDOWN, kIDCStartupShutdownImpl,
                              // Implementation to IK2ServiceProvider to identify the service type as startup-shutdown
                              IID_IK2SERVICEPROVIDER, kLazyStartupShutdownProviderImpl,

After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message: "DAVE Networking Dave kernel extensions could not be loaded! Error 71 - Too many levels of remote in path."

After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message:
"DAVE Networking
Dave kernel extensions could not be loaded! Error
71 - Too many levels of remote in path."
I have uninstalled DAVE and used Clean App to remove trace elements of program, however I still get the message and am unable to eliminate the error messages. When I click OK the message goes away briefly and then comes back up.
Any solutions would be great.

Dave,
Thanks....What I did was load the free eval version of Dave 9.0 and then used the uninstaller which must have deleted the kernel giving me the problem.
Thanks for the response.
Razor

SQL*Loader-930: Error parsing insert statement for column

we upload data on daily basis in application throug apps user and these table are invloved
1. DEV_RA_INTERFACE_LINES_ALL(owner is a apps)
2.RA_INTERFACE_LINES_ALL(owner is a AR)
we do steps
1 delete record from DEV_RA_INTERFACE_LINES_ALL table
2 delete record from RA_INTERFACE_LINES_ALL table
3 load data using sql loader with apps user
4 insert in RA_INTERFACE_LINES_ALL table
we want to change user i mean these step do dataupload user not apps
we give the proper rights to dataupload like select,delete and insert rights on these table to dataupload user but when i going to load data throug sql loader we receive error
SQL*Loader-930: Error parsing insert statement for column APPS.DEV_RA_INTERFACE_
LINES_ALL.ORIG_SYSTEM_BILL_ADDRESS_ID.
ORA-00904: "F_ORIG_SYSTEM_BILL_ADDR_REF": invalid identifier
and if i insert data through apps then done.

make sure that u have no speces left
between lines.
give the path of control file path correctly.

SQL*Loader-523 error in solaris sh script

I have a SQLLdr script that I want to call from a unix shell (sh) script. We are running on Solaris 8. When we run from the command line the Sqlldr works, when we run from within a shell script, we are getting an STD ERR -2 error. I have tried running SQLldr with the -s (silent option) and silent = all but it doesn't seem to be helping.
I pasted the error that I am getting below.
Thanks,
Greg
SQL*Loader: Release 8.1.5.0.0 - Production on Wed Jul 19 15:20:48 2000
(c) Copyright 1999 Oracle Corporation. All rights reserved.
SQL*Loader-523: error -2 writing to file (STDERR)

...Ugh, it was working for about 5 seconds on my test page, but now it's just giving me an exit status of 137(Anyone have any clue what this means? I can't find anything that tells me what these exit number means and it's really starting to bug me) after I commented and uncommented a few lines to check to see what caused it to work...Hah! Works again. New Question time:
LD_PRELOAD, what does this variable have to do with SQL*Loader, since I'm using it in the apache start-up to do some stuff with oci8[No idea if it's necessary] and when I, assumedly, set it to "null" it works, but when it keeps my initial value it breaks and gives me my 137 error status with my original errors.

SQL*Loader-925: Error while uldlfca: OCIStmtExecute (ptc_hp)

Hi my table loading is failing with the floowing error. But same table is loading daily without any problem. I tried again but failed with the same message.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
SQL*Loader-925: Error while uldlfca: OCIStmtExecute (ptc_hp)
ORA-03114: not connected to ORACLE
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
SQL*Loader-925: Error while uldlgs: OCIStmtExecute (ptc_hp)
ORA-03114: not connected to ORACLE
SQL*Loader-925: Error while uldlgs: OCIStmtFetch (ptc_hp)
ORA-24338: statement handle not executed
How to solve this problem?
Thanks
Prashanth

user614414 wrote:
Hi BluShadow,
Nothing is changed recently. Loading is happening for other files at sametime, when this loading is failed. I have renamed and recreated the table, then it is working fine. similar problem occured today for some other table.
May i know, for any other reason it will happen?You've only supplied us with an error message and that's what the error message indicates.
If you want more help, you need to supply more details.

DPS loading article error

Similar Messages

Maybe you are looking for