DPS(pdf): What is the maximum zoom-factor for the iPad

Hi,
What is the maximum zoom-factor for the iPad?
Regards,
Anil Yadav

I'm sorry -- I have not communicated my question well.   When I use full
page mode (no window borders, Ctrl-L) and zoom to many thousands %, then
entire screen (14000 pixels by 1200 pixels) is not used -- only about 9000
pixels x 1200 pixels.   The entire screen should have document content
because I'm extremely zoomed in. There is no meaning to pixels/inch in
this context (and I tried your suggestion -- it made no difference).   This
seems to be a hard limitation of Adobe Reader X screen display...?
Thanks,
Scott

Similar Messages

What's the maximum counter frequency for the cRIO?

Hi Everyone,
First of all, thanks for your input here!
I'm new to the cRIO, but have been working with LabVIEW for awhile. I need to accurately measure the time between several digital inputs. One input starts the counter, another captures and stores the current counter value, and a third stops the timer and also captures and stores the counter value. It's basically a stopwatch. The problem is that the counter needs to run at a frequency of 100Mhz or greater. It also needs to be at least 28 bits wide so that it won't overflow between start and stop inputs. Is this possible with any of the cRIO systems currently available? If so, how? I'm assuming it will need to be implemented within the FPGA, but does the FPGA run that fast?
Thanks so much!
-Yohan
Solved!
Go to Solution.

Hi Yohan,
Unfortunately, the cRIO is not capable of reliable frequencies at 100 MHz or greater. I would recommend speaking with your local NI Field Sales Engineer or callteh NI Sales department at (888) 280-7645 to discuss the hardware that would accomodate your application.
The PXI-6586Rmay be an option: http://sine.ni.com/nips/cds/view/p/lang/en/nid/207297
I hope this helps!
Kristen H.

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

What's the maximum LAN speed with the Thunderbolt to Gigabit Ethernet Adapter on my MacBook Pro?

While I was at Yodobashi Camera yesterday, I got a Thunderbolt to Gigabit ethernet adapter for my MacBook Pro. I figure, since I'm paying for the high speed fiber optic (Sony Nuro), why limit my self to wi-fi speeds at home?
Before connecting the adapter, via wi-fi it the speed was 143.8 Mbps down and 181.5 Mbps up.
After connecting the adapter and making a direct LAN connection to the router, the speed is 783.2 Mbps down and 940.1 Mbps up.
I'm certainly happy with the speed, but since Sony Nuro is supposed to be 2 Gbps down and 1 Gbps up I was wondering what the maximum possible is with this computer and adapter. Before asking the provider I was curious what the maximum specs where.
The ether cable is a 3 m category 6.
Thanks,
doug

It's not really your computer that is getting the 2Gbps download - it is the router/ modem.
If you hooked better/ different hardware up you could probably push those speeds around your network too. The trouble is that most residential hardware is gigabit ethernet not fibre. Fibre cards & cable are expensive in comparison.
The existing hardware may allow you to 'bond or aggregate' multiple ethernet connections into one link to get more speed over ethernet. Obviously this requires more complex routers, switches & a network admin to set it up
Those speeds sound nice, this bottleneck will mean that other devices on you network can't choke up the whole connection & make other users sad.

6230i - What's the maximum attachment size for EMa...

Hi
I got my new 6230i (Firmware 3.40 on T-Mobile) yesterday and have just set up my email on it and discovered that you can attach files to emails. Only problem seems to be that it says my attachments exceed the limit. That's a bit unfortunate as I've tried to attach only one image (~350kB) which I took with the built in camera.
Anyone know what the maximum size allowed for an attachment is and is there a way around it?
Thanks
Thomas

We are talking about 6230i (and not 6630).
In 6230i case, the max. size is limited:
Sending: 100kB
Receiving: 50kB
This is limited by the phone (and not network or email provider).Message Edited by embedded_system on 19-May-2006
10:17 AM
Message Edited by embedded_system on 19-May-2006
10:33 AM

I have a 13 inch macbook (late 2007) what is the maximum allowable height for a hard drive?

what is the maximum allowable height for an internal hard drive. I want to replace my hard drive are there any other things I should make sure of in terms of compatability?

timfromdoylestown wrote:
would they erase it and reformat it? what is the purpose of doing so?
they have to format it to make it mac "compatible", for a lack of better terms. I don't know what they would do.

Folder/Public Folder - What is the maximum file size before the URL created no longer works

Hi,
I have received links to files in beehive folder, where the URL will not load as the file name is to long and it's reach some type of maximum display limit for the URL.
Is there a maximum document file name length before the URL hit some type of cut of point?
For example if the document is in a folder, within a folder, within a folder and then the file name, how long can the file name be or how many folders can you go down to in the document area before some type of cut of limit is reached.
I will locate the example as I am seeing this a lot when the URL comes from a specific team and there seem to be a lot of folders within folders.
There was nothing in the documentation that I could find - Thanks in advance for your help.

Miriam,
The length of the URL is the critical factor in the access to the sub-folders - we have had issues with users having very long folder names without a great depth of folders. There is no actual limit on the depth of the folder structure - I just created 10 folders nested below the Documents area- admittedly the folder names were Documents>1>2>3>4>5>6>7>8>9>10. In the bug database there have been issues where the depth has been up to 50, though the issue has been mainly due to the time taken to get the details of the deep nesting not the actual number of nested folders. In practice a limit of 30 seems to be the point at which the performance can deteriorate so that is the limit we would advise.
The client used seems to have an influence as well. IE has a limit on the URL of 2048 but it does not seem to be this limit that is hit so there is probably a cut-off at the lower number in the handler. The other clients webDAV, OBEE, OBEO and the Desktop Integration Server supplied with WebCenter have different reactions to deeply nested folders.
However there was a proposed fix, for a future version which will not now appear, in OBEO and OBEE to report an error if you wanted more than nested 30 folders , though you could go as deep as 50 if the folder names were limited.
My advice - keep the folder names as short as you can and try other clients - which all work on BeehiveOnline as well as stbeehive as the depth that can be handled is client dependent.
Phil

When using Exprt PDF, the choice of language for the document to be exported is sometimes very restricted, while sometimes many more languages are available. What's the matter?

When using Exprt PDF, the choice of language for the document to be exported is sometimes very restricted, while sometimes many more languages are available. What's the matter?

Dear Mrs.,
I now add 2 print screens which show what I get when I try to export a PDF from Adobe Reader and which languages are available.
The same problem does not exist when I use the website.
I hope this gives you a clue.
Many thanks,
Jos MERTENS,
Advocaat.

What is the maximum operating time of the airport and airport extreme?

What is the maximum operating time of the airport and airport extreme? Can I leave it on for long periods of time, like never turning it off? Will it affect the performance of the said products?

Apple does not include an "Off" button on the AirPorts since they assume that you will leave it on all the time, like you would a modem.
If you are going to be gone for a week or two, it might make sense to power everything off during that time.
Otherwise, leaving the device(s) "On" actually results in less stress on the device that constantly turning it "Off" and "On". In other words, odds are the device will last longer if you leave it "On" most of the time.
Apple does not publish a life expectancy for the devices, but 5-7 years...on average....for a modem or router is about right....my opinion here.

What is the maximum memory capability of the HP Pavilion 15-p210na laptop?

What is the maximum memory capability of the HP Pavilion 15-p210na laptop?
Many thanks.
/whinge
...and why don't HP publish this information somewhere easily found?
Do they want to make it harder for people to decide to purchase their product?
/endwhinge

R_Lange wrote:
What is the maximum memory capability of the HP Pavilion 15-p210na laptop?
Many thanks.
/whinge
...and why don't HP publish this information somewhere easily found?
Do they want to make it harder for people to decide to purchase their product?
/endwhinge
Hi,
I guess that 8 or max 12GB. It depends how many slots. It should support 12GB with 2 memory slots but only 8GB with a single one. The CPU itself supports up to 16GB.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

What will the Froyo update do for the Fascinate phone?

I've seen a lot of chatter about the FroYo update, but don't really understand what it's supposed to do for the phone, specifically Fascinate. It's supposed to "fix" ... what?
Can anybody shed light on this for me?
I'm not a techy by any means... so please dumb it down for me...

It should improve overall speed, hopefully fix the slow GPS locks, all full flash 10.1, and a few other miscellanous tweaks. Below is the unofficial changelog for the Galaxy S Froyo update which should be similar
It should improve overall speed, hopefully fix the slow GPS locks, all full flash 10.1, and a few other miscellanous tweaks. Below is the unofficial changelog for the Galaxy S Froyo update which should be similar
Android 2.2 JIT compiler
Adobe Flash Player 10.1 compatibility
New Android Market with auto-updating
Speed improvements
Pinch-to-zoom homescreen flyover
Improved default keyboard
Quick links to “GPS” and “Auto rotation” toggles on notification bar added
Slightly different graphics and transitions with app drawer and default icon dock
Colored icons in settings
GPS Fix
Colored settings icons
Media Hub
Darker menu theme, navy blue color
Better Exchange support
Video records in MP4 format
New Search widget
New Gmail application

Is there a breeze export option that defines the maximum opening resolution of the browser ?

Hi,
The maximum resolution of a breeze presentation slide is 720
x 540 correct?
Does anyone know if there is a way to prevent that a breeze
presentation gets too big when it is opened in a big resolution
screen?
What I’m asking is if there is a breeze export option
that defines the maximum opening resolution of the browser that
contains the breeze presentation, preventing the images and flash
animations to loose too much resolution…
When I play my presentations from the breeze server, it
doesn’t load in the web browser but in a window that not fit
the entire computer screen, what is good to the definition of the
presentation…It is possible to do this locally??
(I may be wrong, but in the breeze server is it opening the
swf file directly?)
I sure can, after exporting, place the swf file of the
presentation, manually, in an html file (instead of using the
index.html that is created in the publishing) this way it will
never get bigger when opening it in the browser, but if I do this
it will affect the SCORM or anything else??
What do you suggest?

Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
* http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

Default zoom factor for bookmarks and hyperlinks

In Acrobat Prof. 8.1.2, is it possible to set a default zoom factor for
newly created bookmarks or for hyperlinks referring to pages in the same
document? Is it possible to change the zoom factor for all such hyperlinks
in one step without having to edit each of them individually?
Andreas

That book needs so much clean up I don't think you can fix it, sorry.
I'd start over - again, apply the above child's book example to start another book.
Be sure to replace the boiler plate text/images with yours, then reposition....don't just dump yours on top of them.
If you can't use the child's book TOC example, search here on the topic, but don't ignore the minimum requirements in any case.
And again, use Pages or InDesign if you want more control over your e-pub.
Good luck.

Suggesting a Rating-factor or Indifference-factor for the Forum Posters

Hi,
This is actually not a question, but a suggestion on presenting forum users' behavior indicators.
I like the new point system that OTN introduced that allows the questioner to rate the answers based on how it solved his/her problem.
However, in some forums, the forum users show exceeded indifference and apathy for rating answers. Often they do not rate a correct answer using the rating method; and sometimes even after acknowledging informally that the question has been answered. I often come across posters who post a question and on seeing the reply they do not answer or even acknowledge any help they receive even informally until they get stuck in the next steps. If it just goes for once in a while, then it's ok. However, some forums show a greater prevalence of such trends and some users show a habitual indifference. I don't know if you have noticed it too.
So, I was wondering what if a rating-factor for the questioners (or indifference-factor, or courtesy-factor) is introduced that can reflect the %age of answers a questioner rates as correct, or helpful. Similarly, their tendency to mark a question as answered when it is answered may also reflect in a similar factor.
what do you think?
AMN

I understand what you're saying, but to me, this is like saying that we want to rate the questioners so if they don't award points we can avoid answering them.
The only questioners I tend to avoid answering are the ones who are blatently rude or obnoxious. Just because they haven't awarded points for getting answers to their questions is not really an overriding factor, in my book anyway. I come here to learn stuff myself and to assist where I can, regardless of whether people give me points for it or not. I've never once had to ask for any of the points I've been awarded, I've just been given them, yet if I had received points for all the useful answers I'd given I'd probably have twice the amount... and so would a lot of other members here. If I'd received no points, I would still answer questions cos, to me, it's not about feeding my ego by saying "look at me I've got loads of points", it's about me assisting and learning from other people's issues and the other expert answers given.
On a more practical/technical level I think you'll find that the forum is limited by what the Jive software is capable of, so whilst it came with a question answered/points system as part of the package, I think awarding points against members for other reasons is probably not part of it's capabilities.
;)

What is the default exception aggregation for the NCKF IO STOCK

Hi all of you,
What is the default exception aggregation for the Non Cumulative Key Figure info object Stock?
When I am selecting Maximum, or minimum or Avereage (all values) its not selecting any of these values but only Average (weighted with the number of days) is getting selected.
Please explain.
Thank you.
TR.

Hi Vinod,
Thank you for your reply.
I had selected Last value as exception aggregation and activated it. But again when I double click on the IO STock, in the aggregation tab besides exception aggregation I find the option Average (Weighted with the number of days).
Is it getting selected by default when I check the radio button Ncum. value with in- and out-flow?
Please explain.
Thank you.
TR.

DPS(pdf): What is the maximum zoom-factor for the iPad

Similar Messages

Maybe you are looking for