DPS support for windows 8.1 and windows phone applications?

Does the latest version of DPS support development for apps on Windows 8.1 and Windows Phone or is there a roadmap for when this will be supported? It seemed like it was to be release by the end of 2013.

What do you mean by "ADP"?
All your Adobe rep will do is get you a custom viewer that you can submit to the store. You still have to publish the folios yourself to either the same account as your iOS folios, or to a different account (your choice). Remember that the Windows 8.1 viewer does not support Single Edition. It is only for professional or enterprise customers who are publishing multi-issue applications.
Our intention is to have all iPad folios render beautifully on Windows. The only overlays we don't currently support are pan and zoom, image sequence, and audio. If you don't use those overlays then you don't have to change your folios at all.
You can look at the Adobe Inspire app in Windows Store as an example. The folios there are the direct copy of the iPad folios, with no edits.
Neil

Similar Messages

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Is there a 32 Bit edition available for windows server 2012 and windows server 2008

    Dear All,
    Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
    Regards,
    Ahmed

    Hi,
    Quote：
    All editions of Windows Server 2008 R2 are 64-bit only.
    Reference link below(session Supported upgrade paths):
    https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
    And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

    Dear
    I need
    HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
    can anyone provide me ? no links to read text, direct solution is welcomed
    thanks in all

    Hi.
    You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
    For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
    Please let me know of any issuesm
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • SCM update for Windows 8.1 and Windows 2012 R2

    Hi,
    When are we likely to get an update to SCM for Windows 8.1 and Windows 2012 R2?

    Hi
    you must add these lines in ZTIGpoPack.wsf (for MDT) and LocalGPO.wsf (for LocalGPO), and for MDT 2013, copy ZTIGpopack to Deploymentshrare\Scripts
    sOSVersion = oEnvironment.Item("OSCurrentVersion")
                If (Left(sOSVersion,3) = "6.3") and oEnvironment.Item("IsServerOS") then
                        sOS = "WS2012R2"
                        oLogging.CreateEntry "Using Windows Server 2012 R2 GPO Pack", LogTypeInfo
                ElseIf (Left(sOSVersion,3) = "6.3") and Not(oEnvironment.Item("IsServerOS")) then
                        sOS = "Win81"
                    oLogging.CreateEntry "Using Windows 8.1 GPO Pack", LogTypeInfo
    Regards
    Thanks for this, but you also need to update the GPOPack.wsf in (each relevant) template folder of the Deployment Share like this:
            If(Left(strOpVer,3) = "6.3") and (strProductType <> "1") then
        strOS = "WS12R2"
            ElseIf(Left(strOpVer,3) = "6.3") and (strProductType = "1") then
        strOS = "Win81"
            ElseIf(Left(strOpVer,3) = "6.2") and (strProductType <> "1") then
        strOS = "WS12"
            ElseIf(Left(strOpVer,3) = "6.2") and (strProductType = "1") then
        strOS = "Win8"
    As ZTIApplyGPOPack calls GPOPack.wsf.
    (Which is what I think Scorpio92 probably meant when you said to edit LocalGPO.wsf...)

  • Where can I get a bluttooth driver for my ipad minm and windows 7

    Where can I get a bluetooth driver for my ipad mini and windows 7? Windows see and know the device but the ipad doesn't see win7. In troubleshooting, win7 say it doesn't have a driver??

    Mac 101: Printing (OS X Lion)
    Important:
    Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper.  Finally, use the instructions in this article to connect the printer to your Mac.
    The procedures are identical for Mountain Lion.

  • MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

    MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    3. Deselect Proxies if selected.
        System Preference > Network > Advanced  > Proxies Tab
        Under "Select Protocol", uncheck any box if selected.
        Click "OK" then  "Apply”.

  • Hyper-V on Windows 2008R2 Running Windows 8.1 and Windows Phone

    I am a lone wolf developer running Hyper-V on a legally-licensed Server running Windows Enterprise 2008R2. I have extremely limited research funding.
    Since I need to evaluate Windows 8.1 and Windows Phone development for the 1080p Phone Emulator, I created a Virtual Machine of Windows 8.1 Evaluation Copy RTM on my server. I am trying to create software for the Nokia Lumia 1520 Phone-Tablet.
    Everything in the Windows 8.1 Virtual Machine runs perfectly from Hyper-V on Windows 2008R2, except for one problem related to my Phone development project. Networking is perfect, the display is perfect, there are no other issues except this "gotcha".
    The problem appears with the Windows Phone SDK Update 4, which supports a 1080p
    Windows Phone Emulator. This emulator is supposed to load it's own instance of a Windows 8.1 Hyper-V virtual machine
    when debugging the Phone Application from Visual Studio 2012 Express.
    This Emulator tries to start it's own Hyper-V session inside Windows 8.1. In my humble opinion, it should be possible to do this (load a Windows 8.1 HyperV Virtual Machine inside a "parent" Virtual Machine).
    It presents this error message instead:
    Essentially, Windows 8.1, running in a Virtual Machine, should also be able to create a Virtual Machine inside it's own Virtual Machine. That is the required design of the Phone Emulator (must be able to intantiate a Windows 8.1 Hyper-V Virtual machine to display
    the Phone).
    If that does not work, then I guess it must not be a supported configuration. If not, then I need to licence Windows 8.1 on a separate physical computer. Anyone want to tackle this?
    +__+

    I have a legal, licensed Windows 2008 R2 Server with the Hyper-V Role. I then downloaded the time-limited
    Windows 8.1 RTM Evaluation Version and successfully installed. It works flawlessly. Next, I installed the
    Windows Phone SDK Update 4 on top of
    Visual Studio Express 2012 for Windows Phone.
    It all works flawlessly, except for one little problem.
    Since I am interested in evaluating and testing the Windows Phone SDK 1080p Emulator, I must run
    F5 - Start Debugging in Visual Studio in order to see my Windows Phone application in 1080p resolution. Well, the Emulator
    almost completely starts up successfully, but at the last push it gives an error. This error is shown below as a JPEG. 
    Does anyone know which of the "Hyper-V components is not running?"
    +__+

  • Frequent Fails when installing Adobe Flash Player (Windows XP, Windows 7, Windows 8.0, and Windows 8.1)

    Constantly see the following error message from Adobe Flash Player Installer:
    Error has been encountered. Close this window and try downloading again.
    What in heck does that error message mean?
    This message occurs most of the time when I try to update to the latest version of Adobe Flash Player.
    It would be one thing if it was only occurring on Windows XP, but it shows up on Windows 7, Windows 8.0, and Windows 8.1 frequently.
    Just for curiousity looked at the Windows 8.1 Event Viewer and NO error message shows up there.
    Would be nice to:
    (1) know what the error really is so that it can be reported to you to get it fixed once and for all.
    (2) have Adobe Flash Installer NOT to delete itself every time that the installer is run.
    (3) have an OFFLINE download installer to download and install Adobe Flash Player without the MacAfee installer.
    (4) have Adobe UNCHECK that the Install MacAfee installer that you have to opt out of each time you do an Adobe Flash Player download. You should make it to OPT IN not OPT OUT! Don't need another program installed without my permission. This causes issues when I have to uninstall MacAfee on computers that others in my family use.
    It seems to takes up to 20 times to download the Adobe installer over a period of many days or weeks to get it to install properly.
    I have written software for over 36 years as a computer programmer and now Senior Software Developer. I have do installers on my own and have to figure out how to solve my own issues on the installers to get them fixed.
    This issue doesn't seem to be tied to any particular version of Windows... Same issue occurs on Windows XP, Windows 7, Windows 8.0, and Windows 8.1! The ONLY commonality seems to be Adobe Flash Player.
    Certainly Adobe should be smart enough to fix this issue once and for all.
    If the issue is that there is a network congestion error that it cannot download the installer, please say so and please please please DO NOT delete the downloaded installer every time that it is run on a PC.
    I'd like to fix the security issues with the Adobe Flash Player AS SOON as there is a patch for it. I don't like having security issues over a long period of time.
    Please address this issue so that I can put this to bed and not have to keep sending you messages that once again the Adobe Flash Player Installer is yet again broken!
    Certainly you have a staff at Adobe that CAN fix this problem quickly!

    more information about errors can be found in the FlashInstall.log file in C:\WINDOWS\system32\Macromed\Flash (and the SysWOW64 equivalent on 64-bit systems)
    the offline installers (below) do not delete themselves
    you can find the offline installers
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    the offline installers are not bundled with any 3rd-party crapware

  • Competition problem between Windows 8.1 and Windows 7 on Photosmart C5180 connected via LAN

    Hello everyone, I am writing because I need some advice / help on a problem last night while configuring a small network.
    The network is made up as follows:
    2 notebook: Windows 8.1 and Windows 7
    3 different printers:
    2 USB connected to the respective notebook,
    1 HP Photosmart C5180 network printer connected via LAN via a router.
    The situation is the following:
    both notebooks recognize the various printers and are able to send and print documents but,
    when the print command starts from both notebook SIMULTANEOUSLY or at a distance of a few seconds, the only document printed is ALWAYS the one sent from the notebook with WINDOWS 8.1. The other one submitted by WINDOWS 7 IS LOST without being reported.
    So if I ask of you is someone experienced in the print queues, print drivers, competition in the print jobs that can help me in solving this problem.
    Thanks in advance

    Hello cesco,
    Welcome to the HP Forums.
    I see that you are having a communication issue when attempting to print on two separate printers at the same time.
    This will be a communication issue for sure.  The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer. 
    There is no way that you can print from one computer to two separate printers at the same time.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?

    I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii.  Is there a Camera RAW version for me? 

    Thanks for your help.  I checked out DNG on YouTube and understand more
    about it.  I downloaded the DNG converter and transferred in files from my
    camera.  Then I imported into Lightroom.  It works!   Thanks again.
    On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]>

  • Hebrew support for nano 2nd gen and ITunes

    Hi,
    I have a new ipod nano. I've installed ITunes, and all my hebrew named files are being displayed with strange font (Giberish)
    Is there any way to get hebrew fonts support for the ipod nano and the ITune 7.0 software ?
    Dani

    I know that this question has been asked before on these forums. Have you done a search for this regarding Hebrew on these forums? Although the links provided above do not offer support for the nano. Have you tried doing a search on google for a possible solution to your question. It might be good to leave feedback regarding support for hebrew text for the ipod at the link below.
    http://www.apple.com/feedback/ipod.html
    GFF

  • To Bentley Wolfe, Adobe, re: Locked [ADOBE FYI] : Getting Support for Flash Player 10 and Issue Tracking post

    Hi Bentley,
    I wanted to tell you that an important link you posted does
    not work and says "Sorry, this page is not available".
    It is in your post entitled "Locked [ADOBE FYI] : Getting
    Support for Flash Player 10 and Issue Tracking post", and is at
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfmforumid=44&catid=184&threadid= 1400586&enterthread=y.
    The link that is non-functional is "If you have issues
    installing Flash Player 10, first troubleshoot your issues using
    http://www.adobe.com/support/flashplayer.
    Read the technotes, do some testing.".
    I just wanted you to know, since you have gone to all of the
    effort of posting it. I apologize for having to start a new thread,
    but I was unable to post to your thread, since it is locked and
    read-only.
    This is the issue I am dealing with myself, and desperately
    need help with. :)
    Thank you so very much,
    Karen

    Hi Bentley,
    I just noticed something. The link that I pasted, to your
    post, does not work either. I noticed why, however, and it seems to
    be why the link in your original page does not work, and why the
    link in my post that goes to your post does not work.
    It seems to be that if a link has a period after it (i.e., if
    it is at the end of a sentence), the period is incorrectly included
    in the "real" link. Somehow, whatever mechanism that processes the
    post has a mini bug in it.
    If you go to the link that is results in "Sorry, this page is
    not available", and look up into the browser address bar, you will
    see the period there each time.
    I just thought that I would point this out, too, so that the
    web techs in charge of the workings of the forums could look into
    it.
    Here is the original link, without a period after it, to your
    original page.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1400586&enterthread=y
    Thank you again,
    Karen

  • Finding the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections

    Hi
    Where can I find the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections that appear when I write the /store /v options of bcdedit command?
    Thanks
    Bye
    Balubeto

    All the BCEDIT command line options are described here:
    https://technet.microsoft.com/en-us/library/cc709667%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    Jerry
    Actually, I wanted to find the explanation of all entries (as inherit or
    device or osdevice) of the Windows Boot Manager and Windows Boot Loader sections
    that appear when I write the /store /v options of bcdedit command?
    Thanks
    Bye
    Balubeto

  • How can I install asian script for language support for bangla in safari and install a font??

    how can I install asian script for language support for bangla in safari and install a font? Some websites are working fine in ipad and iphone4 but not in mac osx supported imac or macbook. Example: www.sonarbangladesh.com.

    You just need to install a font, like one of these:
    https://sourceforge.net/projects/onkur/
    http://www.ekushey.org/?page/osx
    For non-Unicode sites, see
    http://m10lmac.blogspot.com/2011/04/reading-non-unicode-indic-language-web.html

Maybe you are looking for