Dps video working in preview but not on ipad

I have a mp4 video that plays in the preview but on the ipad i just get a white blink. please help

I had a problem like that in the past and the answer for me was to delete the link and place the file again.
Other than that, it could be a memory issue.
Bob

Similar Messages

Simple buttons working in Preview, but not on iPad

Hello everyone. I have a Button (I'm working in InDesign CS6), with instructions "Go to State". It links to a photo on a seperate layer. The link works perfectly in the SWF preview (shift-command-return). But when I update the file to view it in Adobe Viewer it does not work. (I am using Viewer Vers 25) There are no other functions on the page that could be "blocking" it. In fact, on some pages where there are two or three buttons (all of them with instructions of "Go to State"), 2 may work and one not. I am confused as to how I can see it working in the Preview, but not on the iPad. Any suggestions appreciated. Many thanks!!

Bob, just got in and downloaded the patch - the buttons are working perfectly now!!
Thank you for taking the time to help me out!! I'll be more diligent from now on in checking for updates. Thanks again. James

Flash video works onDreamweaver preview but not after uploaded to site

Hi,
I created a page with FW CS3 and opened it with Dream weaver.
Using Flash CS3 I created some video clips. I then inserted three
video files to the web page. In DW preview mode I can see the
videos. I copy the source code and pasted it to the index page of
my website as well as uploaded all the sit files from my hard drive
folder to the website. The page comes up but not the videos.

Search this forum for "FLASH" "UPLOAD". You'll find hundreds
of answers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SERocks" <[email protected]> wrote in
message
news:g11qep$n8m$[email protected]..
> Hi,
> I created a page with FW CS3 and opened it with Dream
weaver. Using Flash
> CS3
> I created some video clips. I then inserted three video
files to the web
> page.
> In DW preview mode I can see the videos. I copy the
source code and
> pasted it
> to the index page of my website as well as uploaded all
the sit files
> from my
> hard drive folder to the website. The page comes up but
not the videos.
>

Flash work in preview but not in the browser!?

Hi there:)
I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
Thanks!
V

Hi John!
Yes, sorry about that.. here it is.
http://farmingtonfarm.com/appraisal.html
Thanks for your help!!
v
Date: Thu, 8 Apr 2010 18:52:05 -0600
From: [email protected]
To: [email protected]
Subject: flash work in preview but not in the browser!?
Can't really help without a link to the site. Can you provide one?
>

XML (RSS) Spry Dataset File Works in Preview But Not Over Internet

hello
I am trying to build a custom feed reader using the Spry framework in Dreamweaver CS4 and everything seems to go smoothly until I actually host the file (with the accompanying js and css files) and try to view it over the internet
previewing from DW shows everything working the way it should
I feel like I am missing something obvious ... but not sure what
thanks for any help!

Hi, i have a similar problem..
These URL returns a XML:
1) http://www.bolsadesantiago.com/intradayServlet?symbol=IPSA
2) http://www.valorfuturo.com/contenidos_vf/proyectos/clientes/penta/titularnoticias.asp
I use a CS4 and both works in preview, but only first works over internet (IE7).
I suspect that 2° has a problem of syntax XML, but work with jQuery.

HT1430 cox email is working on PC but not on IPAD and IPhone

cox email is working on PC but ot on IPad nor IPhone

Hello there, jwritz.
The following Knowledge Base article provides some great steps on troubleshooting your issue:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Works in preview but not when published in captivate 8?

My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

Interactive PDF–buttons working in preview but not in PDF

I have a series of buttons that reveal hidden graphics. One of those hidden graphics is a background layer, in a separate layer, that should appear when a button is clicked. It is showing up, but in front of all other content, even though the layer is in the background. I have nothing else on the background layer. Also, the preview in InDesign shows this working properly, it's the exported Interactive PDF that is having problems. Any suggstions?

Show/hide buttons can let you show and hide graphics which have been themselves turned into buttons. But in InDesign, they cannot control the visibility of layers. I think that's because of the way buttons are handled in the PDF file. I think the buttons themselves are seen as a separate layer above the "content" of the PDF.
You can change layer visiblity with buttons but not in InDesign. You have to do it in Acrobat.
Create your layers in InDesign. Export as a PDF but in the Export Adobe PDF dialog box, you must select Acrobat 6 compatibility and check Create Acrobat Layers. This takes InDesign layers and makes them PDF layers which you can work with in Acrobat.
You can either create the buttons in InDesign or in Acrobat, but controlling layer visibility isn't an available action in InDesign. So you'll need to change their action WITHIN ACROBAT.
In Acrobat, you can choose View > Navigation Panels > Layers. You can turn the eyes on and off to control visibility like in InDesign. Then set the layer visibility the way you want the first button to set and set the action for the first button to be Set Layer Visibility. When you click Add. It sets the visibility to the current state. Repeat the process for the second button.
In InDesign CS5, to export buttons you'll need to choose File > Export > Adobe PDF (Interactive). Check Acrobat Layers.

Swap images works in preview but not in browser

Hi everyone,
I am attempting to get a swap images to work. It works in the preview window but not when I preview it in the browser. When I open it in a browser the states seem to "cycle" through really quickly in rapid succession. I have linked my png file for you to see. Any thoughts?
Thanks,
denbeck

Your swap image slice is set to Animated GIF. Change it in the Optimize panel to plain GIF or PNG 8
Jim Babbage

Flash image viewer works in preview but not online

Hi
I followed an online demo on how to get an image slideshow on my webpage using flash. It was using insert media image viewer. It all worked fine, looked great in the preview but when I put everything online I can't see it. Just an empty space were it should be. This is the site where it is
http://www.idoityourself.com.au/ if tried moving the image to different areas in case it didn't like being in a folder within a folder etc but still didnt work. Any ideas??
thanks

http://www.idoityourself.com.au/Scripts/AC_RunActiveContent.js File not found.
You have not uploaded the Scripts folder to your server which DW generated automatically for you when you inserted the Flash.

Embedded video works vertical orientation but not horizontal

Consistently having problems getting my horizontal orientation to play video.
Works in my vertical format, I adjust the same layout to fit in horizontal and the button
no longer works. Is there something Im missing.
Ive deleted the button and the video and started over and it still doesn't work.
Any suggestions??

I'm having something similar. I use a flv player, so I know
the FLV works.
I've seen or rather captured FLV's from youtube. and
converted them to useful stuff that I didn't need a FLV player for.
Thing is why do the FLV's play on youtube, but not on my
machine without a stand alone flv player ?
What I have is a 16 meg avi/wmv that I can trim to a 2 meg
FLV. That's what I want to put on my web site, and have it play.
What do I need to accomplish this ? I've not done anything
with FLV before.

Dreamweaver rollover working in preview but not online

I use image swap for rollovers often. After making some changes to my friends website I noticed all the rollovers stopped working. I tried it in all browsers, I tried restoring a file from time machine, I tried it with a bunch of different images.
So I tried a very simple blank page with one image on it and "swap image" behavior applied to it. It also displays fine in the preview and not online (Dreamweaver CS5.5)
http://amypalma.com/test3.html
Please help, I think I'm going crazy.

Nancy O. wrote:
Your file is corrupted. All line breaks have been stripped clean out of your code. Scripts cannot work this way.
Try using a different FTP client like Filezilla to upload your pages.
Also check the Line Break type in your Preferences. See screenshot.
Hit OK.
Go to Commands > Apply source formatting.
Nancy O.
Possibility #2 (and I've done this countless times) is that somewhere along the way in editing, someone inadvertently removed line breaks using the "Find and Replace" feature while cleaning up other code and applied it to more than necessary places.. If that's the case, replace the scripts with redownloaded (or in this case reinstalled) originals. I've broken some really cool scripts this way and I spend a few hours kicking myself in the backside for it, but I always keep a backup of my scripts for when I forget and do it again.
Nancy's right, though Filezilla is a good solution, but if the pages are corrupted, it will load them as they are, and the problem will persist.

PayPal button action works in preview but not when published

Hi!
Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista). Any thoughts or insight would be appreciated. Also, I'm new to flash and here's the button action:
on (release) {
        //create the LoadVars that will hold our paypal information
        var paypal = new LoadVars();
        //specify the business, amount of the item, shipping, etc.
        paypal.cmd="_xclick";
        paypal.upload="1";
      paypal.business="[email protected]";
        paypal.currency_code="USD";
        paypal.amount="275.00";
        //paypal.handling = "0";
        //paypal.no_shipping = "0";
        paypal.item_name="One Session";
        //added
        //paypal.lc="GB";
        paypal.bn="PP-BuyNowBF";
        //paypal.no_note="1";
        //send our information to PayPal, including all the optional variables we have collected from customer
         paypal.send("https://www.paypal.com/cgi-bin/webscr","_blank","POST");
Thanks!
Robert

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

Multi-Slide Synchronized Video Working in SWF - but not HTML5

We have a module that has 8 slides that contain Multi-Slide Synchronized Videos, each of which are contained on 1 slide (as seen in the screen shot.)
When we publish the project, the swf version works fine. However, the first html5 video shows up, then none of the others do.
We first tried inserting the video as an "Event Video" but when we tried that, in html5 there were no controllers at all for the in-slide video. This breaks our spec because the client needs cross browser and mobile device combatability.
Any clues as to why the video isn't even appearing after the first slide in html5?

No controllers showing here either. Controllers show and work in preview mode, but when publishing to Html5 then playing on Ipad, video in slide plays once, but now controls visible...can't pause. stop or rewind...
Dave

PortalApp working on Preview but not on Portal

Hi everybody!
I'm facing a real very strange situation. I've developed a PAR, which contains two Components. One of them calls the other using AJAX & Prototype. I've tried it on my own machine, and works perfect. I've upload the par to the server which will contain the Portal, created an IView for the par, a Page for the IView, and the preview works fine. But the page doesn't work on the portal. The AJAX request fails, and doesn't reach the server....
We're connecting the server via VPN.Can that be a problem?
Thanks in advance, and sorry for my terrible english.
Eneko

If application works in Preview and doesn't work in portal page, it could be a permissions issue.
Did you check the application with same user in both places?
Previewing the iView with administrator rights is not the same as viewing it in portal with some standrard not-administrator-rights user.

Dps video working in preview but not on ipad

Similar Messages

Maybe you are looking for