DPX output from Red R3Ds - Becomes Very Bright

When I render DPX from Red R3Ds the output appears extremely or harshly bright - as if the gamma suddenly ramps hugely up.  How can I correct this?

Just tried this, in fact its hooked up to my other monitor right now and i do still get the red tinge. The picture is perfect apart from this though. Its nice and sharp and clear.
The colour does indeed come on just fine to begin with but once the monitor has done its auto adjust it drops back to the red. I've played with the display settings, different resolutions etc for both displays and still the same.
The thing is, the mac does seem to be sending the correct signal as the monitor is initially correct. Ill try this with a CRT monitor once my battery is charged and if i can find another VGA cable in ill give that a go too.

Similar Messages

  • TV (video) output from new nano looks very good!

    Just a comment for those who may be wondering how the video quality on the new iPod nano looks when output to a TV. I have one of the old iPod AV docks with the s-video port and the new nano seems to work fine with that combination (using a standard s-video cable between the dock and the TV). Thus far I'm really impressed with the video quality, I can't see a single problem, the color is good, the quality and sharpness is as good as I've seen from any iTunes Store content, and as far as I can tell the frame rate is fine (no stuttering, skipped frames, or problems with audio sync). I'm amazed that such high quality video can come from such a small device. If it continues to look this good (after viewing more content and after more testing) then I think Apple may have "hit one out of the park." This thing could turn out to be the most popular iPod yet (if you have any interested in video and still want a small device).

    I just found out that the video out (TV) on the new nano supports video playlists so you can create playlists for back-to-back display on the TV. Not even the AppleTV will do that (even though the latter has been a highly requested feature for the AppleTV since day one). In fact, if you can do without the on-TV menus you may find that the nano is a better video output device than is the AppleTV (that is, the menus system on the nano doesn't appear on the TV output).
    Also, I just competed a few hours of video playback to my big-screen TV from the nano and I'm still impressed. No video problems at all, looks very good considering the quality limitation from the content that is currently on the iTunes Store (limited to standard definition, no HD movies, HD TV, or HD music videos as yet).

  • Compressor DPX output from Prores (4444) QT is washed out, can I fix this?

    Hi all,
    I've been trying to use compressor to convert quicktimes to DPX, but have noticed that the DPX files rendered out are all washed out.
    I imagine this is because compressor is doing a video/lin to log conversion. Is there anyway to avoid this? I simply want compressor to do a file conversion so that the DPX look as closeas possible to the original prores source.
    I've looked through the settings, but there isn't much to play with. Anyhelp would be very much appreciated.
    JT

    plus one. for now i use color, works well actually but being able to export "linear 0-1024" dpx from the fcp timeline would be nice, and of course saves a render step. gluetools seems to work but unless you use it a lot a bit too expensive.
    /mattias

  • Thinkpad x220 display problems very bright

    I just bought my laptop in March 2012 and I've run into this problem 3 times since then. 
     All of a sudden, the display will become very bright, oversaturated, for every application that I have open.   The pixel sizes remain the same, and most of the type is legible, but because of the oversaturation, the font is a bit more difficult to read/discern. 
     I've restarted and that usually takes care of it, but I'm wondering if anyone else has had the same problem?  I worry given my laptop is new and I had terrible problems with my previous Lenovo ideapad (large vertical white stripes took over my display, obstructing view of whatever application was open). I swore to never by an Ideapad again. 
    thanks!

    hi lenovolinda,
    Thank you for your post welcome to the community,
    Based from my understanding of your post it appears that it could be a configuration issue. You may want to check your Bios version to see if it has been updated the to lates, which is v1.29. Should it is lower than the bios version i have shown over here, i would recommend you update your Bios first to ensure that your system is ruuning all latest drivers and bios.
    You can update the bios and all other drivers by hitting the thinkvantage blue key found on the top your keyboard or alternatively you down the drivers from.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805
    Please do let me know of the update.
    Regards

  • Imported images becomes too bright

    When I'm importing RAW images in my Aperture 2.1.4, my images becomes very brighter, something like 2 F Stop.
    I'm wondering why, and what to do to resolve the problem....
    Thx !

    Strangely, I have exactly the opposite problem. Images darken (visibly) during or immediately after an image is imported.
    I haven't found the solution, and have actually migrated to Lightroom largely because of this and problems with how exported images are rendered - dull and dark. The latter could simply be a problem with not using the correct colour profile when exporting.
    I thought it might have to do with enabling the Onscreen Proofing feature (View > Onscreen Proofing), but having played with that there's no noticeable difference.
    Have you had any further luck investigating the problem?

  • My iMac has suddenly become very slow to wake from "sleep." Why? How can I fix this?

    My iMac has suddenly become very slow to wake from "sleep." How do I fix this and what is causing the problem? Even the mouse wakes very slowly.

    Try these basic troubleshooting steps.
    1. Quit all app scompletely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Hi i am from india i bought my phone last year from hongkong as it was not launch in india.now with the ios5 upgrade the home button has become very hard. i take a lot of care of my phone.the istore is not ready to repair it .please do something

    hi i am from india i bought my phone last year from hongkong as it was not launch in india.now with the ios5 upgrade the home button has become very hard. i take a lot of care of my phone.the istore is not ready to repair it .please do something.it was working proper before the upgrade.i even bought the ipad for 42 k from the istore in india.(mumbai).i love apple product and the moey i would by the mac book air also.but now i dont have any solution for my home button it is very irritating when it does not work .get an upgrade to do something it is factory unlock phone.regards vijay.

    Hi well let me be clear.last year the iPhone was bought from someone traveling to honkong.i did not get it cheap it was a new phone and what is the use of getting a phone after 1 year six months.thats when the iPhone came to India.I paid more than what u selling the iPhones in India.now I have bought the iPad in India now.we are ready to pay for the repair charges.my phone work excellent it's just the home button.please don't say I was saving some buck I paid from my hard earned salary.it was nearly 800$ in Indian rupees.i love ur products.i offen make people buy ur products in Istore talking Good about them.if I new this phone would have problem I would wait for it to com to India.i work when i was 18years in one of the best handbag stores in India as a managelabor 20 years and I know how important is customer satisfaction and service as till date I give it to them at there door step.i even buy ur expensive softwares.i never had a problem with my 3G and 3GS iPhone in the past.regards vijay

  • Why does iPhoto/Aperture keep deleting photo sets from my Flickr account or keep placing whole sets back into the Pending stage of uploading the photos. This is becoming very frustrating and extremely time consuming. Any help would be most welcome

    Has anyone got any idea as to why Iphoto/aperture keeps deleteing my photo sets from my Flickr account without warning or reason given. Also when I enter my sets the program will revert all of the photos back to the Pending stage of the up oading process. One or two photos I could live with but some of my set are in excess of 1500 photos per set, and this becomes very very time consuming to re upload them. and whats more annoying on some occassions after spending 12 to 16 hours re uploading them I find that they have all been duplicated. Is there a Bug with Iphoto or Aperture????????
    any help would be most welcome P Jefferys

    I am using Iphoto version 9.5.1, and No I am not deleting any photo from any file. what happens is this :- I open up Iphoto and enter my flickr account via the shared folder icon on the left hand side of the screen this is when I get a pop up screen from Iphoto informing me that they have removed a SET of photos from my Flickr account (no reason given) when i go into that set all I can see is dashed empty square where the photo used to be. I will then get another pop up screen saying that Iphoto can no longer access my flickr account and will I permit a reconnection and allow Iphoto to access my flickr account (add pass words etc) when I get back into flickr the SETS have gone and all other photos enter the Pending stage again. After re uploading the missing photos I find that some 50% of them have been duplicated.
    PJ

  • Can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter

    can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???

    Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
    Russ

  • 3D output from premiere

    Hi,
    We are due to start a stereoscopic 3D project filmed on RED. For on-set previews with a Macbook Pro Retina (8GB RAM, SSD) and a Blackmagic Ultrastudio 4K to convert output from thunderbolt to hdmi 1.4 - will this work?
    We want to drop files into premiere, sync them and then get stereoscopic playback on a preview monitor (preferably a consumer grade TV with hdmi input. Is this possible?
    Is there any more equipment we would need?
    Blackmagic have confirmed that their Ultrastudio 4k is capable of taking a thunderbolt signal and converting it to a hdmi 1.4 signal, so is adobe premiere cs6 capable of this?

    Sure, Premiere can deal with r3d footage just fine but it doesn't have any native 3d tools.
    I've used Tim Dashwood's Stereo3D Toolbox in FCP 7 and dabbled with it in Premiere (the new version supports Premiere, not just After Effects) and it's very good.  If you want to do any post-convergence or floating window work (or even digital zooming) it's essential.
    Still, I prefer the Stereoscopic Adjuster filter in Edius.  Have a look at their 3d QuickStart and you'll see what I mean:
    http://www.grassvalley.com/docs/Application_Notes/professional/edius/PRV-4155M_EDIUS_3D_Tr aining_AN.pdfhttp://
    http://www.grassvalley.com/docs/Manuals/professional/edius/PRV-4144M_EDIUS_3D_QuickStart.p df

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Whilst using photoshop my iMac has become very hot is this normal

    Whilst using photoshop on my iMac it has become very hot is this normal

    What iMac model do you have and what version of the Mac OS is it running? Doing "About this Mac" from your Apple menu is a good start. Its first window looks like this:
    Note the two lines I've highlighted with the red arrows; post what they display on your computer.
    Different iMac models have different heat tolerences and heat management options, so we can better help you if we have those two bits of information

  • IMac has suddenly become very slow doing everything?

    My iMac has suddenly become very slow -at present it is useless and will have to take to apple unless you can help.?

    First, make sure you have adequate backups. If your hard disk is failing this could be a sign. It can be replaced if necessary, but a backup strategy is recommended whether or not you are experiencing problems.
    Read: OS X Mountain Lion: If your Mac runs slowly. It applies to Lion as well. The article is very cursory, but be sure to read through to the end. Unfortunately the link there is broken, so use this one: Disk Utility. To do this you must start your Mac from the Recovery System or Internet Recovery.
    Rather than ask a dozen questions for more details about your system consider the following. You must be running either Lion or Mountain Lion. Including your version of OS X in your system description would help.
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will take a moment to run as it collects its data.
    Copy and paste its output in a reply. Do not be concerned about anything that says "Problem" or "failed".
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

  • I am using iPhone 4S. Recently I updated my software to iOS 6.1 since then my Iphone become very slow. Can anyone help me to resolve it?

    I am using iPhone 4S. Recently I updated my software to iOS 6.1 since then my Iphone become very slow. Can anyone help me to resolve it?

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red  to delete apps from this list.
    - Press the home button twice when done.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

    I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

    Thank you so much...
    1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
    2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
    3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
    r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

Maybe you are looking for