DQS matching data quality project finished but stuck on Matching - Export screen

Attempt to open the data quality project again results in the export process screen. Back and Next are greyed out. i.e. not possible to run the matching project again.
to repeat;
New data quality project
Map - 7 mappings applied
Matching - overlapping clusters
Export - selected matching results to export, Click Export. Success. Click "Finish" (Next is greyed out)
Attempt to open the project again. back on the export screen ahain
DQP is in State: in Work, Locked: False, Contains unpublished content: True
Data Quality Services Client : 11.0.3401.0
Data Quality Services Server : 11.0.3401.0
any ideas?

Have spent some time battling the UI.. As a workaround,
never click Finish. You will then be able to re-run the match process with updated results over and over.
Note: If at any time you click Finish the data quality project will be "stuck" again and you will have to create a new one to have updated match results.

Similar Messages

PR Delivery date as project finished date

HI,
When user is generating Service PR from project system, its delivery date is taken as a Finished date of the project. Further SAP is not allowing to edit this date.
Can anyone let me know why it is happening. My user do not want delivery date as finished date of the project, he would like to put his own delivery date.
Kindly suggest
regards
Sanjay Karnekar

Hi,
I think that the date comes from the scheduling of the network activity. Go to the project builder and then display the material. On the Purchasing Data tab change the settings from 'Align the finish date' to the 'Manual requirements date'.
If you'd like to change this setting globally, you need to maintain the customizing under
Dates -> Scheduling of networks -> Specify scheduling parameters
Cheers, Aleksandra

Data Quality - Failed to create connection to MDR.

Hi All,
I have installed Data Quality 11.7.2 on windows 2003 server using SQL 2005 (Both SQL 2005 server and Data Quality are in the same server) , The install was successful. But when I try to Open 'Data Quality Project Architect' it throws an error
Failed to create connection to MDR.
Driver error messgage = qodbc_mssql:
Unable to connect, Database error message =] [microsoft][odbc sql server driver]
[ tcp/ip sockets] sql server does not exist or access denied
I checked the ODBC connection and tested it successfully too.
I am not able to pass through the 'Meta Data Repository Connection' as its failing in 'Setup SQL connection option'
Any help is appreciated !!!
Thanks
Ranjit Krishnan

Hi Paul,
Thanks for you reply, OBDC connection was created under System DSN, also tired the users DSN option too, but did not work.
Recreated the ODBC connection many times still no luck.
The 'Project Architect' client and the MDR (SQL 2005 Server) are on the same machine.
Thanks
Ranjit Krishnan

Update SharePoint list with project finish date on Project.Updated event

Hello,
I want to update a column in a SharePoint list with the project finish date when a project is updated on Project Server. My OnUpdated event handler is being called ok, but if I change the project start date Project Server runs an asynchronous republishing
on the project, and my event handler ends up being called before the finish date is update by the republishing job, so the code writes the "old" finish date on the SharePoint list. The solutions I could think of are:
Identify the republishing job on Project Server queue, pool the queue waiting for it to finish, then read the finish date and update the list item in SharePoint.
Include a custom job on Project Server queue after the republishing job, that reads the finish date and update the list item in SharePoint.
I don't know if any of the solutions are feasible and how to implement them. Has anyone coded something like this and/or have a better solution?
Thanks,
GB

I vote for the option 1.
I did for one of my event handler..Did you try "on published" event?
            projectSvc.QueueUpdateProject(jobUid, SessionUID, projectDss, false);
            //WaitForQueue(q, jobUid);
            jobUid = Guid.NewGuid();
            projectSvc.QueuePublish(jobUid, e.ProjectGuid, false, string.Empty);
            jobUid = Guid.NewGuid()
Cheers. Happy troubleshooting !!! Sriram E - MSFT Enterprise Project Management

Enterprise Data Quality - stuck/crash when processing high volume

I am using Enterprise Data Quality, trying to run a data profiling process of 1 million rows. However, the process (which contains group and merge processors) appears to be always stuck half way through or crashes. I have tried other data sources and the result is the same.
It seems that Enterprise Data Quality does not handle high volume very well. Please assist and let me know what other details you require.

Hi,
It is certainly not the case that EDQ does not handle large volumes of data well. We have a large number of customers running huge data volumes in the product and have benchmarked the product running services on massive volumes, including matching of 250m records.
However, if you want to run large jobs, you need to make sure the system is installed and tuned correctly. How did you install the product? Are you running 32-bit or 64-bit? How much memory is allocated to EDQ?
With regard to best practice, did you throw all profiling processors at all of your data? The better approach is to 'open profile' a sample of records and pick more carefully which processors to run on larger volumes... otherwise you are telling the server to do a huge amount of work and some of it may not be necessary. Data profiling is an iterative exercise to help you find data issues that you can check for an fix using audit and transformation processors. Profilers are used mostly for simple reporting when it comes to production jobs on larger volumes.
Note that there are some profiling processors that will cause progress reporting to appear to 'pause' at 50% of the way through a process. These are 2-phase processors such as the Record Duplication Profiler which needs to spool all data to a table and then analyze it rather than work record by record. Such processors are typically slower than the simpler profilers that add flags to the data with a counting phase at the end (Frequency Profiler, Patterns Profiler etc.)
Regards,
Mike

Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, any ideas.

Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, and all resources on computer, any ideas??

Hi
And
• free space on Start-Up hard disk ? How Much ?
• Brand and type of DVD used
• Burn Speed ?
• Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
Yours Bengt W

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud.

Backup and Restore of DQS (Data Quality Service SQL 2012) Databases

We are currently using DPM 2010 running on Server 2008 R2 as our backup solution. We will soon be leveraging the Data Quality Services in SQL 2012 along with the Master Data Service.
In the SQL 2012 documentation from Microsoft it states, “The backup and restore operations of the DQS databases must be synchronized.”
Otherwise the restored Data Quality Server will not be functional. Currently I believe that DPM will run serialized backups of databases from one SQL server.
I was hoping someone could point me towards some documentation for backing up DQS with DPM.
Is anybody currently doing this? If so have you been successful restoring?

LogicalName cant be same for mdf and ldf. verify again with FILELISTONLY. Also you have put wrong logical name
MOVE N'OriginalDB' TO N'D:\sql data\TargetDB.mdf'
Please paste the output of
RESTORE FILELISTONLY FROM DISK = 'D:\backup.bak'

Error for Project finish date earlier than forecast finish date

Hi Experts
I have the dates in Project definition as follows:
Forecast start (PROJ-SPROG): 31.01.2011
Forecast finish (PROJ-EPROG): 31.03.2011
If i enter date 30.03.2011 as Finish date (PROJ-PLSEZ), below error message appears: "Finish date is earlier than start date. CJ563"
The date i have entered is later than PROJ-SPROG, still not accepting.
It accepts entry of date beyond the date in field PROJ-EPROG.
Can anybody share thoughts on this?
Warm regards
ramSiva

Can you kindly verify the other sets of dates being maintained in your activity (i.e. earliest & latest)? Are you using default configurations for PS i.e. confirmation dates are checked against basic dates and not forecast dates?
Regards,
Syed Ammar Zaheer

CJ20n - Project Finish Date - Purchase Requisitions

Hi all,
I have a question about the "Finish Date" field in CJ20n - Basic Data Tab.
What effects does the date in the field have? (Is it just for information?)
We would like to enter a date as a finish date and if someone tries to create a purchase requisition on the project dated after the finish date, there should be a message or warning that prevents the creation. Is this possible with that field or any other field?
Thanks
Anne

Hi Anne,
The Finish Date field in the Basic Data tab page doesnt have any adverse effects as such. The field implies the planned finish date of your project. In certain cases this date is specified and in certain the system determines it by way of scheduling. It is not a mandatory filed and you can still proceed with your project without specifying the Finish Date.
Coming to the 2nd query. I dont think system will prevent you from creating a PR when this particular Finish Date is reached. However you can control it by system/user status. Once this date is reached you can set a status which will prohibit the creation of PR.
Hope this helps.
Best Regards,
Gokul

Advantages of Data Quality Services(DQS) over fuzzy loop

Hi There
I am using DQS in my packages. Its work is similar to Fuzzy lookup.
I am wondering what are the advantages of DQS over Fuzzy Lookup.
Can you please help me ..??
Regards,
Nidhi

DQS is much more advanced.
You have concept of domains within knowledge base .It can either have static list of data or it can even be made dynamic by accessing online data service. Also you can specify additional business rules inside it. You also have flexibility of determining
what all values you want to include as valid ones based on suggestions it rpovides and you can approve the ones you want.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
^^^ this.
In addition to the above (which is a very good answer), DQS allows you to offload the work of maintaining the data quality rules to a "data steward". For example, when a new rule is added (or a change to an existing existing rule) it doesn't require modifications
to the underlying ETL by an IT developer along with a release.
BI Developer and lover of data (Blog |
Twitter)
Yep Indeed. Thats definitely a big plus
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Scheduling as per given project finish date

I need to know if it is possible to arrange the project structure to do below described scheduling.
Urgent reply will be highly appricated..
thanks,
he.
I would like to give the "project finish date " ;
I would like p6v7 would schedule such that ;
- project finish date would be the date that I gave,
- all activity dates would be defined accordingly even if they should have been start and/or finish before project start date.
I should say that there is not any resource / cost assignment. Just activities/ original durations/ and relationships have been entered.

user9166529,
By you saying "project finish date" I have to assume that you have some sort of mandatory completion date such as a contract deadline.
Or do you mean that you want to add a date constraint to the project finish date such as "must finish on or before" your date of completion?
If needed, you could even apply a "mandatory finish" date constraint (not highly recommended).
On the other hand, by building your initial schedule you will be able to determine your planned finish date by tracing your longest path. If this completion date does not meet your needs you then would need to adjust your scheduled activities (durations) to fit within your planned finish date.
After settling on your initial schedule, save it as a baseline (copy) in order to perform periodic comparisons between your original (baseline) and the current (real time) schedules. The result of performing these comparisons will produce your schedule variance data.
Hope this helps,

Just used Match consolidations & match comparison with data quality for add

I recently started to look for jobs on BODS and data quality i used data quality match consolidations.
Are there any ither impt elements which are widely used in the industry from data quality perspective?
Kind regards.
Edited by: cplusplus1 on Feb 8, 2012 7:08 AM

I am not entirely sure I understand your question. We do have Data Quality blueprints for use in Data Services available. You can find these on the SCN.
The SAP Community Network hosts several Data Quality blueprints which are available for download. Go to http://www.sdn.sap.com/irj/sdn/ds, and if necessary enter your user id and password or create an account.
Scroll down to Downloads and click the link in Samples Data Services Blueprints. There are several download packages that specialize in different areas and one that has all available samples contained in one download package.
Note: A "review" page displays after clicking the link of the blueprint to be downloaded. Click View this Code Sample to download the file.
Hope this is helpful.
Thanks,
Paula

I installed 4.0 over 3.57, now it's stuck in a reboot cycle, it keeps saying reboot to finish but does not see the reboot

I ran the install exe file for firefox4.0 with 3.57 already installed. It seemed to go fine. It came to the dialogue box saying reboot required to finish installation. I have rebooted several times and keep getting the final reboot dialogue box. I also attempted to reinstall but after the first install screen I get the same dialogue box asking to reboot. Reboot is not recognized. I cannot remove either 3.57 or 4.o without getting the dialogue box saying installation/update needs reboot to finish. When I reboot I get the same box again. What's stuck?

have you tried rebooting your computer?

Background job finished but Error sending data

Dear all,
report is running in my prod server . once this report completed sapuser get mail . when i check the job status it shows
Job started
Step 001 started (program GP4CF9U420G825I4P7DU8XY49WH, variant CUSTOMEROUTSTD, user ID S2K_BASIS)
Spool request (number 0000012259) created without immediate output
Error sending data (4)
Job finished
one more clarity i required
this report should goes to 4 SAP users . how can i configure this report to 4 sapusers
kindly suggest me

> Step 001 started (program GP4CF9U420G825I4P7DU8XY49WH, variant CUSTOMEROUTSTD, user ID S2K_BASIS)
> Spool request (number 0000012259) created without immediate output
> Error sending data (4)
I'd check SCOT/SOST for any errors. Also check the syslog (SM21).
> this report should goes to 4 SAP users . how can i configure this report to 4 sapusers
Create a distribution list (SAPoffice-Inbox - environment - distribution list) and enter that as addresse for the output.
Markus

DQS matching data quality project finished but stuck on Matching - Export screen

Similar Messages

Maybe you are looking for