DR server still showing consolidation users and messages from production

We are doing a DR exercise. My first. We copied the production database to the dr servers. Since they are on the same domain, we put entries in the host files on all our servers to spoof the prod server names to point to dr servers. Moved selected data files for essbase, etc to the dr application disks.
Everything appears to be working except for HFM. I still see production users activity and messages in the shared services console when I go to administer, show consolidation user activity or messages.
I have searched the registry, all database tables I could think of, and the application disks on the HFM and shared services services looking for a hardcoded IP and can not find one.
The message below came out of the hfm config log which has the production database name (which when pinged points to the DR database serrver) but the IP listed is the production IP. Any suggestions?
(Jul 30, 2010, 10:21:25 AM), com.hyperion.config.wizard.impl.DBWizardState$1$1, DEBUG, DB component setHost: p5wiadbs10.FNFIS.COM/10.132.205.63

Couple more comments :
1.) WHERE are you accessing HFM Web from? Locally on one of those servers or from another computer?
If this were me at this point, I would break out Fiddler2 (to verify which servers web traffic is coming/going to) and then I would fire up wireshark (all network scanning) to try and figure out what server(s) are trying to talk ot production and when. Network Monitor from MS may be a good option as well as I believe you can see network traffic by PROCESS which will help you narrow down what program(s) are trying to hit production envirionment information. (http://www.microsoft.com/en-us/download/details.aspx?id=4865)
My understanding is that HFM directly only has cluster information in the HFM database (HSX_CLUSTER_INFO, HSX_CLUTER_CONTROLLERS, HSX_CLUSTER_SERVERS, etc.) There shouldn't be any other machine specific information in HFM database, etc.
I do know that the workspace has some redirects going on in the .CONF file; however, if there was something hardcoded, you would have found that...
My guess is that something in the Shared Services/Foundation Services database is pointing to production as the other servers talk to that machine for config info. Otherwise, something is buried in a web config file, but you should have discovered that already.
2.) Additionally, note that HOSTS file changes only affect DNS resolution. If there are any type of broadcast messages or WINS resolution happening that won't address it. To hardcode WINS resolution, you would update LMHOSTS file in the same folder as HOSTS. Using wireshark to monitor network traffic on the same subnet as those servers would definitely be valuable here...... Broadcast messages would be using MAC address of networkcard and not hostname, for instance.
3.) Maybe try some simpler stuff first. What happens if you re-register the app through workspace? What about unregistering / re-registering server to shared services via configuration utility? (Though, I'd be a little bit concerned that it might unregister your real application if it is talking to production shared services...)
Edited by: beyerch2 on Aug 30, 2012 8:51 AM

Similar Messages

  • 820e errors in user and message databases

    Have started geting these pretty frequently on both user and message databases. I am finding them in the POA logfile. When this happens user sometimes gets an 820 error message and email closes. I run gwocheck structure check and fix nightly, and content check and fix on weekends. We have very large post office w around 100 users. Size of user db doesn't matter, it has happened on large users and smaller as well. Have tried doing structural rebuilds on user db, but these messages still come back again.
    Help please!
    mary

    Originally Posted by mspencer
    Have started geting these pretty frequently on both user and message databases. I am finding them in the POA logfile. When this happens user sometimes gets an 820 error message and email closes. I run gwocheck structure check and fix nightly, and content check and fix on weekends. We have very large post office w around 100 users. Size of user db doesn't matter, it has happened on large users and smaller as well. Have tried doing structural rebuilds on user db, but these messages still come back again.
    Help please!
    mary
    Hi Mary,
    What kind of server is GroupWise running on (hardware, OS version, physical/virtual, etc)?.... could be the lock errors are caused due to the server not being able to handle requests quickly enough.
    Also what's the GroupWise version running on the server?
    -Willem

  • Although apple id changed to new email account iCloud still showing old one and cant access everything.  How do I update it?

    Changed email address.  Apple id changed but iCloud still showing old one and can't find how to change it.  Cant access everything or download to iCloud because of this.  How do I update my info?

    Welcome to the Apple community.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • SharePoint 2007 – 2013 migration List view webpart still shows 2010 look and feel even after visual upgrade run successfully in 2013.

    I migrated one site collection from 2007 to 2013 environment. I did Visual upgrade on both 2010 & 2013 successfully. We  have a strange issue with  Listviewwebpart with group by  functionality  still shows 2010 look and feel.  
    If I manually edit that  webpart and click ok the Listviewwebpart UI is showing the 2013 Look and feel.  However I can’t manually update all the webparts because there are nearly
    1500 subsites. I tried using console to update webpart but still not lucky
    Following is 2010 look and feel in sp 2013 site:
    expected look and feel should be as follows in sp 2013
    Thanks, Ram Ch

    Hi ramch011 ,
    For your issue, you can force through an upgrade to the new user interface by using Windows PowerShell:
    Verify that you meet the following minimum requirements: See Add-SPShellAdmin.
    On the Start menu, click All Programs.
    Click Microsoft SharePoint 2010 Products.
    Click SharePoint 2010 Management Shell.
    At the Windows PowerShell command prompt, type the following command:
    $webapp = Get-SPWebApplication http://sitename
    foreach ($s in $webapp.sites)
    {$s.VisualUpgradeWebs() }
    For more information, see Get-SPWebApplication
    Reference:
    http://technet.microsoft.com/en-us/library/ff607998.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Generate report to show all users and groups in Shared Services in EPM 11x

    Hi,
    Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
    ~Adeeba

    Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
    ~Adeeba

  • Server does not recognise user and password

    unable to email photos. server does not recognise user and password

    This is a quite interesting issue. Perhaps it may help if we start by trying to understand what caused the issue and then we will consider how you might recover from it.
    One of the things that Cisco wanted to do as they released version 15.0 was to improve the security of passwords in IOS. So they designed and implemented a new "type 4" password which they intended to replace the previous "type 5" password used for enable secret or for username secret passwords. So in those versions of 15.0 if you configure enable secret or username secret for passwords the IOS would create the new type 4 password.
    Then you reacted to some problem and loaded an older version of IOS. 12.2(55) does not understand the type 4 passwords. So as your switch booted on this version of code and it read lines in the startup config that had type 4 passwords it did not understand them and marked them as invalid input. So the result is that your switch does not have an enable secret and perhaps usernames do not have passwords.
    I do not know if you will be able to recover without doing password recovery but I have a suggestion which you can try. See if you can login on the console. It may depend on how your switch was configured whether it will let you do that and whether it will let you get to enable mode on the console. The default behavior was to allow the console to get to enable mode without a password. If your configuration includes aaa authentication enable default enable then the console may not work and in that case I believe that your only alternative will be password recovery.
    HTH
    Rick

  • HT201274 i have ipod 2nd generation and i had reset   Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co

    i have ipod 2nd generation 32 gb and i had reset >  Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!

    For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a 5th Gen iPod Touch, I  downloaded an album and 2 of the songs had music videos. I didn't like it so I deleted it. But it still shows the song and the cloud sign next to it. How can I permanently removed songs/vids? On iOS 7

    I have a 5th Gen iPod Touch, I  downloaded an album and 2 of the songs had music videos. I didn't like it so I deleted it. But it still shows the song and the cloud sign next to it. How can I permanently removed songs/vids? On iOS 7

    Go to Settings>iTunes and App Store and turn off SHOW ALL

  • When i updated my username on laptop, my i touch still showing "old" user name even after sync.

    When i updated my userid at apple web site using my laptop, my i touch still showing "old" userid and will not accept "old" or new password even after sync.

    What do you mean you "had to unlock it"?  Do you mean you jailbroke it?  If it was jailbroken and you updated iOS, then wiping it out is the natural consequence of that.

  • Plugged in brand new ipad that is still showing the 'itunes' and usb lead as a sign to connect to itunes before it will even start up and my computer is detecting the Apple IPAD 2 camera but Itunes is not picking it up? whats going wrong?

    plugged in brand new ipad that is still showing the 'itunes' and usb lead as a sign to connect to itunes before it will even start up and my computer is detecting the Apple IPAD 2 camera but Itunes is not picking it up? whats going wrong?

    If you're really trying to use Windows 2000, then that's the problem. As you'll see on the box, you need at least XP/SP3.
    Matt

  • HT1311 i have already changed my apple account to Aussie store but when i go to apps store, it's still showing Singapore Store and i can't even buy apps now, can help?

    i have already changed my apple account to Aussie store but when i go to apps store, it's still showing Singapore Store and i can't even buy apps now, can help?

    You can try it lumaw, for the sake of testing to see if that new account is still stuck at Singapore but I've seen this a lot where two IDs cause a bevy of purchase/redownload/authentication issues.
    For account concerns like this I'd tell you to start here & talk with the iTunes Store support first:
    https://expresslane.apple.com/GetproductgroupList.action
    Be sure to switch you country to Australia if it isn't already.

  • After uploading to the cloud, i lost access to some of my songs. The library still shows the information and there is a cloud download icon but the font color would seem to indicate it has been deactivated (i.e. nothing happens when I click on it).

    After uploading to the cloud, i lost access to some of my songs. The library still shows the information and there is a cloud download icon but the font color would seem to indicate it has been deactivated (i.e. nothing happens when I click on it).

    Problem closed (although not resolved).  After working with Apple support, no resolution was found.  I asked for a refund of the iTunes match purchase price, which was granted.  Interestingly the support tech, who was very nice if not particularly helpful from a technical point of view, spun the "resolution" of refunding my iTunes match purchase price as a positive one, here is a quote from the final email
    "I'm glad to hear that you're not having issues with the songs you've purchased.  Nothing makes Apple happier than to hear that our customers concerns have been rectified."
    It is notable that I never had an issue downloading music directly purchased thru the iTunes store, the only issue that existed was downloading songs that I ripped from my CD collection and "matched". 
    I'm happy that I received my money back, however I wish that the iTunes Match service worked for me (I was looking forward to this service).  I'm most upset at the time I wasted trying to fix this problem.
    I'll now download music the old fashioned way: syncing with iTunes directly.

  • When I send a text from my iPad, it shows that it comes from my email address.  If I then text that same someone from my iPhone it still shows as if its coming from my iPad.  How do I stop this?

    When I send a text from my iPad, it shows that it comes from my email address.  If I then text that same someone from my iPhone it still shows as if its coming from my iPad.  How do I stop this?

    On your iPhone, go to Settings -> Messages -> Receive At -> Caller ID and make sure the phone number is selected - this will cause new messages sent from your iPhone to appear to come from your iPhone phone number.
    (I actually prefer to have my email selected, so that when I message someone from my iPhone and they reply, it goes to both my iPhone and iPad)
    Also, when you send a message from your iPhone, make sure you're not replying within an existing conversation (that was created on your iPad and linked to your email). Just start a new conversation (even if it's to the same person) by going to the Messages app, going back to "Messages" (top left corner) if you're already looking at a conversation, and then clicking the Compose icon in the top right.

  • Admin Console not displaying new Users and Groups from LDAP

    We created a new Realm in WebLogic, which specifies the location of the Netscape
    LDAP server. Our Weblogic application, called TGSLC, is able to find the ldap
    server to use for authentication. My problem is this- the Admin Console is not
    displaying the new users and groups from the LDAP server. Shouldn't the WebLogic
    Admin Console display any users and groups specified in the ldap server, which
    is referenced in the customized Realm?

    Hi Andy,
    I am not sure why you are unable to see the users and groups through the
    console., you should be able to. Can you post the config.xml?
    thanks,
    -satya
    Andy Levy <[email protected]> wrote in message
    news:3b700c36$[email protected]..
    >
    We're running WLS 6.0 Sp2 on Windows 2000 Professional.
    "Satya Ghattu" <[email protected]> wrote:
    Andy,
    Could you please tell us what Version of Weblogic you are running?
    thanks,
    -satya
    Andy Levy <[email protected]> wrote in message
    news:[email protected]..
    We created a new Realm in WebLogic, which specifies the location ofthe
    Netscape
    LDAP server. Our Weblogic application, called TGSLC, is able to findthe
    ldap
    server to use for authentication. My problem is this- the Admin
    Console
    is not
    displaying the new users and groups from the LDAP server. Shouldn'tthe
    WebLogic
    Admin Console display any users and groups specified in the ldap
    server,
    which
    is referenced in the customized Realm?

  • I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    Your previous tabs will not re-open or be available to re-open when starting Firefox if:
    *your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
    *you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
    *you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
    NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
    If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Maybe you are looking for

  • Multiple triggers for single popup

    Maybe it is dumb question to ask... sorry if that is so but... Is it possible to have several triggers in different parts of page for the same action? E.g. I want to open one lightbox by means of five different buttons. How to do that? Thanks.

  • OS X 10.9 Server Mail Domain Whitelisting

    I just cannot understand why this isn't working. I've added gmail, googlemail, mac, me, icloud to the whitelist, but emails from those domains still get greylisted: $ sudo serveradmin settings Mail | grep whitelist Mail:postfix:add_whitelist_domain:_

  • Restricting websites for domain users

    Hello, We have a Windows 2008 R2 Standard server with Service Pack 1 and IE 9. All users in the domain get to the internet through the server and are allowed to visit any web site. Users have a combination of Windows XP Pro SP3 and Windows 7 Pro. We

  • Can't get my Imac to startup from the hard drive...

    I'm trying to update an old tray loaded Imac G3. I've put a new hard drive and new ram in the machine. I initiallized the disk and installed OS 9.2 from an official Apple CD. I selected my main drive as my startup disk but when I restart, it gives me

  • Preset Folders

    Is there a way to put all the presets that came with LR into a folder? I seldom use them and would like to shorten the preset list.