DR solution for EBS

hello
we need to create a DR solution for EBS 12
we know that we can create a DR site for the database using data guard,
but how to protect the application itself ?
cause data guard will protect against database failure
i mean can we replicate the application layer to the Dr site using some oracle tools ?
or shall we use third party tools
thank you

Hi,
Please refer to the following documents:
Note: 452056.1 - Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC
Note: 753241.1 - Case Study : Configuring Standby Database(Dataguard) on R12 using RMAN Hot Backup
Regards,
Hussein

Similar Messages

Imaging solution for EBS: Best practice guide for server setup

Hi,
We have to implement Imaging solution for EBS using AXF adapter. For this, customer is going to procure and implement SOA and WebCenter Content from scratch.
We are now faced with the challenge whether to recommend SOA and WCC on the same Weblogic server or on separate Weblogic servers. Is there any best practice guide available for setting up Application Adapters for WCC?
Thanks
Arijit

Hi ,
I think this documentation would atleast help you in starting with planning :http://docs.oracle.com/cd/E23943_01/doc.1111/e15483/toc.htm
Thanks,
Srinath

Can we use replication usings oracle 10g steams for EBS r12 database?

HI,
We are using EBS 12.0.6 and database 10.2.0.3 on linux 32-bit/64-bit OS (Multi-Node env).
Actually We want to decrease the load of custom reports on actual production system, so thats why
we need reports server and as my past experience I had used oracle streams for replication with simple schema based replication and tablespace replication also.
So, please educate me, that can i used the oracle 10g streams for EBS schemas like APPS, GL ,INV, PO, ONT, ODM, AR, AP, CM etc?
Please provide us the above related env docs and road Map.
If you have any other way to create the Report Server?
Regard,
Fayaz Ahmed

Hi,
We are not in a position to upgrade the EBS from 12.0.6 to 12.1, because this is lengthy task, but we had already tested technically it in test env, but functional testing in pending.
Now we want to immediate solution if possible, because this is production?
So, please suggest another.
regards

Disaster Recovery document for ebs.

Hi,
I was looking for a good sample document for DR of Oracle EBS in case of disaster.
I am asked to create a DR document for our EBS.
Most of senior DBAs here might have done it already. Could anybody share with any docuemnt/ideas to be followed.
Regards,

Hi,
i did not mean the solution for having DR, but the DOCUMENT we may follow in case of disaster.
i will draw one sample example document table for your review. I want similar document specific to Oracle ebs.
IT system Backup Details:
Priority IT System
Storage Location
Recovery Information
Supporting Vendor
Priority IT Systems:
Priority IT System
Critical Periods
RPO
RTO
Owners
Recovery Process:
Step
Task
Owner
Regards,

Customer Data Hub Required for EBS 11i?

Is the Customer Data Hub required for EBS 11i to work correctly? It appears to be a supplemental product and not a required core product.

Oracle Customer Data Hub (CDH) is not a mandate for EBS users. However, it solely depends on the Organizational needs. If an Organization decides to have SSOT (Single Source Of Truth) for it's customer data they can go with CDH solution.
CDH is a complete packaged solution that allows companies to create a single, enterprise view of their customer base, by consolidating/synchronizing customer data from heterogeneous systems into a central, operational, data store. CDH alone will not suffice the requirement. CDH ties with Oracle Customers Online (OCO), Customer Data Librarian (CDL), and the Oracle Trading Community Architecture (TCA) to create a robust, scalable, central repository of duplicate-free, enriched data across a heterogeneous landscape.
Hope this helps.
Regards,
ND

MAPI for EBS r12

Hi, I'd like to ask whether EBS r12 supports MAPI (Microsoft Exchange)? If yes, how to set up email accounts for EBS instance? Thanks.

Hi Brain;
For workflow please check below and see its helpful:
Control - Workflow: Setup Doc ID: 113664.1
Oracle Workflow Best Practices Release 12 and Release 11i [ID 453137.1]
OWF Diagnostics, Solutions and Information Doc ID:332152.1
11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound Doc ID:831982.1
Regard
Helios

Compatibility Matrix required for EBS 12.1.3 on Windows 7 Operating system

Hi,
Background :
Oracle applications : 12.1.3
Database version : 11.1.0.7
Operating System :
Our Client is using windows 7 and we want the list of products/components that are compatible with EBS 12.1.3.
Thanks

Components planning to migrate to if windows 7 is installed .
Windows 7 64-bit Enterprise
Adobe Reader 9.3
PDFForge.org PDFCreator 1.0
Lotus Symphony Documents 1.3 (Standalone version or integrated Notes version)
Lotus Symphony Spreadsheets 1.3 (Standalone version or integrated Notes version)
Lotus Symphony Presentations 1.3 (Standalone version or integrated Notes version)
"Micrososoft Visio Viewer 2010
or
Quick View Plus or
Microsoft Word Viewer 11.0 (2003) with Microsoft Office Compatibility Pack
Microsoft Excel Viewer 12.0 (2007)
Microsoft PowerPoint Viewer 12.0 (2007)
Adobe Flash Player 10.1
Adobe Shockwave Player 11.5
"Windows Media Player with DVD Decoder (Media Player Codec Pack 3.9)
or
VLC?"
"Windows Media Player 12
or
VLC?"
"Arkoon Security Box (7 or higher)
or
iPass Connect 3.72
Symantec End Point Protection 11.0
Juniper 7.0
GemPlus/Axalto version ACS 5.6
Symantec End Point Protection 11.0
Heidi Earser version?
"Microsoft Internet Explorer 8
"Microsoft Internet Explorer 6
(Need to retain IE 6 in e.g. virtual mode?)"
Lotus Notes 8.5
Sametime 8 (in Lotus Notes 8.5)
Microsoft SCCM Agent"
Not required - Remove
Sun Java Runtime Environment 1.6
"Sun Java Runtime Environment 1.4
Is a legacy JVM required?"
Native Windows 7 functionality
Novell Client 2 SP1 (required during migration period for access to the existing file shares hosted on the OES servers)
Native Microsoft Client
Windows 7 native ZIP support
7-Zip 9.1
Remove
Native Windows DAC (No need to manage MDAC separately)
Required?
VB 6 Runtime (same as used in ISISxp)
N/A
.NET 3.5.1 is native in Windows 7 (includes .NET 2.0 SP2)
.NET 3.5.1 is native in Windows 7 (includes .NET 3.0 SP2)
.NET 3.5.1 is native in Windows 7 (includes .NET 3.5 SP1 plus post SP1 updates)
Adobe Acrobat Standard 9.3
Microsoft Word 2010 (Office 2010, 32-bit)
Microsoft Excel 2010 (Office 2010, 32-bit)
Microsoft PowerPoint 2010 (Office 2010, 32-bit)
Microsoft Access 2010 (32-bit)
Apple QuickTime Player 7.6 or VLC?
"RealMedia RealPlayer 12.0
or
(if required)"
"Adobe Photoshop CS4 (11.0)
or
Corel Paint Shop Pro Photo X3 (13.0)"
Adobe Frutiger and Utopia Fonts
"Microsoft SharePoint Designer?
or
Microsoft Expression Web Designer?
or
MS Publisher 2010
or
Remove?"
"Microsoft Project 2010 Standard
or
Professional?"
Microsoft Visio 2010 Standard
GNU GIMP 2.8?
"Seavus Project Viewer 4.5
or
Open source alternative (OpenProj)
or
Quick View Plus?"
"IBM Personal Communications 6.0
or
Attachmate Reflection Standard/Enterprise Suite 2011 (15.2)
or
"IBM Personal Communications 6.0
or
Attachmate Reflection Standard/Enterprise Suite 2011 (15.2)
or
"IBM Personal Communications 6.0
or
Attachmate Reflection Standard/Enterprise Suite 2011 (15.2)
or
"IBM Personal Communications 6.0
or
Attachmate Reflection Standard/Enterprise Suite 2011 (15.2)
or
Citrix Online Plug-In 12.0
"OpenText Exceed 14.0
(is there an OpenSource alternative?)"
SameTime Web Meeting Client (No need to list seaparely, as not managed at workstation level - download from Intranet servers. Remove
Lotus Quickr Connectors 8.5
DOLS 8.5 (if required for Quickr)
Juniper Network Client?
OTSCM version 4.3
New solution required for Windows 7
Mozilla Firefox 3.x/4.x?
Windows Mobile Device Center 6.1
"CommonTime mNotes 5?
Lotus Traveler?"
Not required - Remove
"Required?
or
Nero 9.4
or
"Filezilla-Project FileZilla Client 3.3 ?
"OpenText NFS Solo 14.0
or
Microsoft Services for Unix (linked to EA and SA)
or
OpenSource alternative"
"Target is Microsoft Printing solution (GUI to be developed as for iPrint).
iPrint may be required during migration."
Oracle Client 11.2
"Oracle RDB Client 3.3?
SQL/Services API?"
Microsoft Access 2010 runtime
SpringSource Grails 1.3
Simon Tatham PuTTY 0.6
Microsoft Silverlight Player
X-Mind 3.2 (or latest available release)
Microsoft OneNote (in Office 2010)
Desktop Search (Windows native) or Google Desktop Search
DIA
To be decided (Open Workbench?)
Symantec End Point Protection 11.0
"Windows 7 native Backup and Restore Center
or
Lenovo ThinkVantage
or
Industrial Backup solution for VIP's and users with special backup requirements
Windows 7 native Snipping Tool
Microsoft App-V client
Microsoft Med-V client
DosBox 0.7 (+ other tools if not sufficient)
Standard tool required (is the need general enough)? - Remove?
Will an off-line tool be required in addition to Systran intranet service?
Bitlocker To Go (requires MS EA/SA)?
MS Publisher 2010
Sticky Notes (std W7 feature)
VNC?
From the note i am able to find only few of those .. can you help me out with respective to other components .
Appreciate your help.
Thanks

Approval workflow for EBS responsibilties and AD Groups

Hi,
I need to trigger a workflow when user makes a self-service request for EBS responsibilities & AD groups.
Since, "Add responsibility" and "Add user to Group" are process tasks, how can we attach a workflow to process task? or we can acheive this by some other means.
Note that, system is already in place & users are already provisioned to AD & EBS, so, we cant go with solution of creating RO for either AD Groups or EBS responsibilty.
Thanks,
Raghu

Assuming your user can have only one Account for the target, then all you need on your request is the name of the group you want to add.
On your custom object, the request should only list the groups the user is requesting. If you want a single group per request, place the groups looking on the parent object form. If you want multiple groups per request, you will create a child table with the groups on it.
When the request process and approval is completed, your "Create User" code for this object or instead "Provision Groups" task which is unconditional, your code should search through the user's existing resource objects to find the valid one for their account in this target. Once the object is found, grab the process instance key, and using the APIs, add the group entries to the child table of the parent object. When the entries are inserted into the account object's child table, the "Insert" tasks will trigger. The adding of the child table entries will allow you to not make any modifications to your existing parent object because it will use all of it's current configurations to provision those new groups to the user account.
Step 1. Request is made for new groups.
Step 2. Approval is performed.
Step 3. Provisioning steps for new object searches for user's account resource instance and adds the new groups to that objects child table
Step 4. Insert tasks are triggered which will provision the new groups for the User.
All done.
-Kevin

Cost solution for new energy insdustry like wind & sun power

We are proposing the solution to a new energy customer based on EBS, and we need to know about the cost management and solution for this industry.
The customer focuses on wind & sun power and fuel cell.
Can you share any documents for that?
Thanks...........

On the face of it, the $30 for every monthly use seems like it might be a good solution for intermittent users. But, as a designers, I think many of us might like to take a brief look at an idea (sometimes just for the fun of it.) And so, if during one month I want to take a peek at some of my work with no real intention of doing any work, I would need to pay $30 to look at my own work. This kind of situation creates a kind of "double bind" for me. It's an uneasy feeling, having a kind of oppressive effect on the creative flow of ideas. Consider this case scenario: "I think I can improve that logo I did last summer. I wonder what this change would look like?" Well, to find out that will be $30.00. For me, that's an uncomfortable position. Again, thanks for the thoughtful reply.

Providing DRC solution for ATMs in the enterprise network

Hi all,
I am looking for ideas on how to provide a Disaster Recovery solution for thousands of ATMs (Automated Teller Machine) deployed in the bank enterprise network. The solution should consider
the following facts:-
1.- Having the ATMs switch the connection to the Server at DRC shouldn't be automatic. This situation might last for the next few years until DRC becomes mirror image of primary data center.
2.- The ATM servers at the primary and disaster recovery center is single server equipped with high availability (Tandem). I mean to say, there is no SLBs invloved in the connection
3.- The application running on the ATMs is calling the ATM Server by hardcoded IP address in the application. The bank is willing to visit the ATMs to change once and forever.
I see source natting as the most appropriate solution, however your opanion and expertise are appreciated.
Thanks
Sami

Sami,
what kind of solution are you looking for ?
Is the concern the connection from ATM to central location ?
Or is it a concern about the server at the central location ?
For connection issues, I don't see any other solution than providing multiple lines.
If the concern is the single server, you could have a loadbalancer somewhere in your network.
The loadbalancer can use probes to check the health of the server.
If the primary fails, or is unreachable, you can automatically redirect the traffic to the standby.
ATM machines will point to the virtual ip (you could reuse the current ip and assign a new one to the servers).
Not sure where to place the loadbalancer without a better idea of the problem to solve and the network.
Gilles.

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

Small Office Network Solution for Final Cut Server - Proxy Storage Etc.

Hi,
I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
I hope this is a decent description of my situation, and would love some advice.
Thanks Very Much,
MacNomad

Hi,
I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
I hope this is a decent description of my situation, and would love some advice.
Thanks Very Much,
MacNomad

HP Solutions for Install Errors for HP Officejet 6500

I recently purchased a new laptop with Windows 7 operating system. My printer is 2 years old. Windows 7 located and initially installed the printer. It worked fine at first, but after I changed the black ink cartridge, the printer would no longer print in black. Pages come through, sounds like they are printing, but they are blank or with some color (depending on the document). I have downloaded HP's install of this printer's software (took over 3 hours), seemed fine, but now it's back to no black print. I have tried to reinstall (again), but it gets stuck installing the wireless. HP sent Solutions for install, icon. Suggests disconnecting and shutting printer, modem, and computer down, then using printer install CD and reload. I have the CD, but it doesn't work with Windows 7. What to do?

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Solution for scanning multiple pages from inside the form6i/10g

Hi All,
I need to scan multiple pages from Oracle forms (6i/10g) using a scanner which is scanning multiple pages per minute. Can any one post a solution for me.
Hafeez

here are the two ways I use to scan images.
1) if the image is a single TIF image then d2kwutil can upload the image into a BLOB field on the database (but it is limited to only SINGLE-page TIFs).
2) if the image is a single or multi-page PDF, then your forms client must copy the image to a filesystem location known by the database (where the filesystem location is a directory on the database), and then the database can import the image into a BLOB field within the database.
either solutions work pretty fast for me (<10 seconds per image)
Chris

Solution for: no audio in time line - conforming issues - unspecified error occurred

these are all the same issue and i have the solution for it.
Adobe has once again let down the non professional user but ignoring this bug. They have also deleted alot of my other posts on the adobe forums.. perhaps so you cannot receive help from me?? who freakin knows..
b Problem:
you import your footage and there is no audio in the time line. you see the audio clip there but no information in it. some people say its because of MPEG format but MPEG files works fine in Windows Movie Maker, Ulead, Pinnacle, Sony Vegas.. etc...
let it be known that its an Adobe Premiere issue.
b Solution:
b step 1:
close adobe premiere
b step 2:
open My Computer and go to tools at the top. From the drop down menu go to folder options. In folder options click the view tab. In the advanced settings section where it says 'Hidden files and folders' make sure 'show hidden files and folders' is selected.
b step 3:
open My computer and go to c:\ drive > Documents and settings. Now click into your user name (NOT 'All users') in my case its 'proGamer'. Now click into 'Application Data' > 'Adobe' > 'common' > 'Media Cache Files'.
b step 4:
in this folder find the files you were just trying to import by searching the name. in my case its file: 20081217030338. you will now see 3 different file types with the same file name you were importing: CFA, PEK, MPGINDEX. delete them all!
b step 5:
go back and open adobe premiere, open up your project again and it will automatically recreate those files you just deleted. hopefully correctly.
b NOTE:
If this hasn't worked then open your adobe premiere project, clear all trace of the files with no audio and start again from step 1. then after step 5 just import the files back into your project.
This has proved to work with every file i've imported that had the audio not conformed.
b your second option:
simply play your clip in WMV or VLC or what ever player you use and record the audio in real time in stereo by using some music editing like cubase or logic audio. you can also use something more friendly like 'recordpad' found here: http://www.nch.com.au/recordpad/screenshots.html now you can buy it from these guys or get it how ever else you like
lemme know how u go

dmd,
I've read plenty of places that they know about the bug and are going to fix it. Will from Adobe said so in a few older posts. It's also listed as an issue in the 4.0.1 readme.
I agree that this is the most screwed up Adobe release ever but I doubt they're deleting your posts to hide it. Never know though.....
"Adobe has once again let down the non professional user but ignoring this bug" I actually wish Adobe would forget the consumers and make Premiere Pro more friendly to professionals. Dozens of multimillion dollar movies have been edited with Avid and Final Cut over the past few years. Adobe doesn't put forth any effort make Premiere a pro application. Because they pander to the consumers and prosumers they end up messing up the product for everybody.
Premiere Elements is for consumers, Premiere Pro should be for the 'Pros'

DR solution for EBS

Similar Messages

Maybe you are looking for