DR570KU no signal during dvd playback

JUST started to have the following issue: during playback of purchased dvd's the picture stops and on my NEW TV and I see "no signal". So far the only way to continue watching the dvd is to start the dvd over and fast forward to the point I lost the signal. From there the movie will continue on to completion. The unit is about 4 years old but has proven to be a excellent unit. The problem as mention JUST started, with in the last couple of weeks. All help is very much appreciated.

Try installing AC3 Filter:
http://www.free-codecs.com/download/ac3_filter.htm
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • No Sound During DVD Playback

    I have a new HP elitebook 8460p and there is no sound during DVD playback. Is there a setting I may be able to change? Here is a list of things I've tried and pertinent information:
    - Confirmed all system mute settings are off (e.g., not muted)
    - Confirmed DVD works on other devices
    - DVD will not play sound in InterActual Player, Windows Media Player, or VLC Media Player
    - Picture is fine...just no audio
    - Running XP
    - All other system sounds work
    Help!

    Try installing AC3 Filter:
    http://www.free-codecs.com/download/ac3_filter.htm
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Sleeps during DVD playback

    Why does OS X.4 display go to sleep during Quicktime playback? It doesn't matter if I'm watching something through FrontRow, Quicktime, or the DVD player.
    Specifically, when my MacBook is on battery power, my display sleep comes on within a few minutes. It dims first and then sleeps a short time later. All this is normal behavior EXCEPT I don't want it to sleep while playing a DVD. If I'm watching a DVD, sleep mode should never happen.
    My other mac computers do the same thing but its less noticeable since the display sleep delay times are longer.
    What settings am I missing or perhaps this is a bug?

    I'm sorry my first post was too brief. I should have mentioned my settings before. I'm not a newbie looking for location of Energy Saver settings and I'm not quite sure why it should matter.
    What possible combination of settings would allow the computer or display to sleep during DVD or Quicktime playback?
    Settings for: Battery
    Optimization: Normal
    Reduce brightness for this power source- checked
    Reduce brightness before sleep- checked
    It will never sleep if the mouse is moving regardless of Energy Saver settings, right? Why should the display ever be put to sleep during playback of a DVD? It's like the OS never recognizes DVD & Quicktime video playback as actively using the computer.
    Questions:
    Does yours go to sleep during DVD playback?
    What settings are you using?
    I suspect this is an OS X.4 bug as I've caught one of my PPC macs going to screen-saver in the middle of playing a Quicktime movie clip.
    Thank-you for your help... I really appreciate it even if it sounds otherwise.

  • Audigy 2 ZS Gamer - hw ac-3 decode during DVD playback unsta

    hey,
    I've set my audigy 2 zs gamer to decode ac-3 and dts for me, but there are some problems. When I use windvd 4, the audio lags a little and if I skip around, the sound stutters. If I use WMP0, which uses the installed ac3filter to pass ac-3 to the zs, skipping around will cause wmp to freeze and sometimes playback of both video and audio will be at an overly fast rate.
    the nature of these problems leads me to suspect a dvd software problem, but if anyone else has gotten this to work well, please pass along your configuration.
    thanks,
    the_wolf_pak

    AC3filter is not a really good software choice to pass AC3 streams to in-PC hardware.
    The fact is that DVD softwares seems to modifies a bit the AC3 stream before outputing it. PowerDVD perfected its SPDIF output with one of the latest patch for the 5 version.
    If sound is lagging with a software like that, verify your PC configuration (BIOS, DMA, drivers, ACPI config, etc).
    Also install reclock ( http://reclock.free.fr )
    and AC3DTS Xform ( http://inmatrix.osnn.net/ac3xform.exe ).

  • Buzzing audio out of left speaker only during dvd playback

    Anyone else have this problem. I can play cds fine and all other audio sounds fine, but when i play a dvd i get a weird buzzing out of the left speaker. I should also note that it is not constant, it occurs with things such as loud voices and some music.

    Now i can confirm that it happens in quicktime as well. Is this hardware or software related? Any input would be greatly appreciated. Also, it isn't so much a buzzing as it is almost like an echo after some loud speach.

  • Menus slow/stuck during DVD playback

    I've authored a DVD which works correctly in iDVD but when I burn it to a DVD and play it in a regular player, the menus "stick", display slowly or sometimes completely halt.
    I've burned many discs before and never ran into a problem like this, although most of them have been of movies with much shorter runtimes.
    Is this a known issue or something that can be worked around, or solved by upgrading?

    Hi Jason
    Can be so many things:
    Some that comes to my mind.
    How did You go about doing the DVD ?
    1. free space on internal hard disc should be about or more than 25GB (Important)
    2. I do a DiskImage (File/ down the menu) and burn it with Apple Disk Util tool or Toast™
    AT AN AS SLOW speed as possibly eg. x1, x2 or x4 = LESS BURNINGs errors
    3. I use high quality DVD Discs like Verbatim
    4. I USE DVD-R Discs (not DVD+R or +/-RW)
    Yours Bengt W

  • IMac powers off during DVD playback, why?

    Right now, since the last update and my Applestore repair, by iMac powers off everytime I watch a DVD. Doesn't matter which player, I've tried Front Row, DVD Player, VLC, and Realplayer. It will play for 30seconds - 5minutes, and then power off. No error message.
    My drive completely failed a few weeks ago, so I brought it to the Apple Store. They held it hostage for over a week and replaced the drive, the drive cable, and the "smart board" or whatever they called it. Upon return the drive works as expected... except this issue.
    I run my business from my Mac so I want to make sure there isn't a simple way to fix this before I go back into the Apple Store (1 hour away).
    Any ideas??
    -Garrett

    Hi, cannot tell you why..call AppleHelp (USA 1-800-275-2273)....L

  • Black border on DVD playback with external monitor...why?

    Hi all,
    I've got a late 2011 MBP 13". Very happy with it (although use is limited as a DJ laptop - and, since I moved abroad, as the basis for a home cinema) and was quite happy to watch films / TV on it as it came. However, I wanted to be able to watch with other people and so have invested in an external monitor.
    I have bought a Philips 23" V-line (model number 236V3L). I am completely happy with the picture quality etc but just have an issue during DVD playback:
    The image (on fullscreen mode) has a 2" black border all the way round. I've tried fiddling with settings etc but can't seem to lose it...and don't know why. I wouldn't mind but obviously my 23" image is significantly smaller as a result.
    Can anyone tell me why? When using the laptop in any other way (i.e. whilst typing this post) there is a 3/4" border on the left and on the right (but not at the top). Is it something to do with the aspect ratio? Is there anything I can do to fix it?
    Looking forward to hearing your thoughts...
    Regards,
    Fin

    I use my laptop and a Samsung SyncMaster as my main screen and my MBP as the secondary. I can drag the DVD window to the laptop screen, and then put it in full screen mode. Here is where the problem lies: When I click any application on the primary monitor, the DVD screen shrinks back to normal size.
    In DVD Player's "Full Screen" preference. enable "Remain in full screen when DVD PLayer is inactive".

  • Mirror 2 Mirror--vertical lines during DVD player playback on Monitor 2

    I have a gateway 22 inch and a RCA TV 40 inch. When I mirror to the RCA durring dvd playback i will see lines ONLY on the DVD window. It slowly scrolls. If i DO NOT mirror and just move the Player over from the gateway screen to the RCA screen, the Lines do not appear during playback. I want to mirror for my clients to see my VIDEO work on the Large TV..but it looks poor when I have slow moving vertical lines. How can I fix this? The vertical lines are ONLY in the DVD player window..the desktop part does not have the lines scrolling.

    Well, I tried that on a section, and I'm afraid it may have been worse than I had originally.  These are the settings in Compressor that I tried.  Am I still getting something wrong?
    File Extension: m2v
    Estimated file size: 2.2 GB/hour of source
    Type: MPEG-2 video elementary stream
              Usage:SD DVD
    Video Encoder
              Format: M2V
              Width: 720
              Height: 480
              Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
              Crop: None
              Padding: None
              Frame rate: 29.97
              Frame Controls On:
                        Retiming: (Better) Motion Compensated
                        Resize Filter: Statistical Prediction
                        Deinterlace Filter: Best (Motion Compensated)
                        Adaptive Details: On
                        Antialias: 0
                        Detail Level: 0
                        Field Output: Progressive
              Start timecode from source
              Aspect ratio: 16:9
              Field dominance: Progressive
              Average data rate: 5 (Mbps)
              2 Pass VBR enabled
                        Maximum data rate: 7.5 (Mbps)
              High quality
              Best motion estimation
              Closed GOP Size: 15, Structure: IBBP
              DVD Studio Pro meta-data enabled

  • Audigy 4 - low DVD playback vol

    Hi guys, I need help in a simple matter. During DVD Movie playback with PowerDVD 6, I get very low volume when using the built-in Dolby Digital decoder the soundcard has. Voices have particularly very low volume levels. Maxing out the speaker volume won't help much. The player has been correctly configured to use SPDIF as the?speaker environment, and the speakers are set up in a 5. configuration in the Creative Speaker settings panel. The built-in decoder is activated in the Audio Console correctly. I have even tried using the ac3filter, but to no avail. Do I need an external amplifier? Or does the ac3filter need some configuration in order for it to work with the in-card decoder?I have an Audigy 4 OEM card that I use with the Logitech X-530 speakers. Any tips will be appreciated. Thanks.

    bump

  • Searching for dvd playback controller

    There used to be a small utility that allowed complete control of OSX dvd playback. You could skip the FBI warning, etc.
    There is "DVD Controller" which is a Sailing Clicker plugin. I don't want to control my dvd player from my phone; I just want to control it more fully.
    Any recommendations greatly appreciated (10.5.2).

    Thanks, Kappy.
    I've been to VT and MU which only return hits of DVD Controller 3.0, which is a plugin and works with Sailing Clicker.
    Should have been more clear: I'm not searching for a utility on my Mac. I'm searching for a 3rd party utility that will allow me to access my dvd's content without watching FBI warnings and advertisements of various sorts.
    I don't want to rip the dvd and extract content and burn a new one. I just want to get rid of annoying "not permitted" etc., messages during playback. Forced viewing of federal warnings and ads is bogus, especially for kids' programs.
    I saw this program when I was using Tiger, thought someone may know of a Leopard version.

  • IPod 5G Freezes during Video Playback

    iPod freezes during video playback. Does anybody else have this problem?
    Usually freezes up about 10 minutes into a video, and then complety locks up. This usually requires 2 to 3 restarts untill it comes back working properly.

    Mine does the same. It really only happens to me when I try to navigate thru menus when video is playing. I usually have to do a forced Reset. I truly think that introducing video on the iPod was not ready for primetime as it is very sluggish, buggy and sensitive during playbabck of video. No problems with music whatsoever but I am frustrated with the very finicky video qualities of this thing.

  • Ipod touch 1st generation stutters during music playback

    My ipod touch running 2.2.1 (5H11) which has always had updates etc kept up, has recently started stuttering during song playback. I have reset a couple of times and it plays fine for one song and starts all over again. Any thoughts?

    I am continuing to have problems with getting my ipod touch restored. I am following the directions on the faq's but it seems that my touch continues to freeze up during the restoring nprocess. Itunes continues to sync, but the ipod screen remains unchanged.

  • DVD playback issue with Windows Media Player

    Hi,
    This isn't an Encore specific question, rather, a DVD playback one. Has anyone had issue playing their replicated DVDs in Windows Media Player? I truly believe it's the media player, not the DVD.  When we put a DVD in the drive and try to open it in WMP, it jumps right to a video, or jumps directly to the last place we were in a video.... it's not defaulting to the main menu.
    Has anyone experienced this? Is it a programming glitch on my DVD? I feel like it's a WMP issue, as it's only happening on certain computers.
    thanks.

    WMP has never been a good player for DVD's. At some point in the past, much of that functionality was disabled my MS, in hopes to reduce piracy. For some versions, no burned DVD would even play, though replicated/pressed DVD's were supposed to play fine.
    I use CyberLink's PowerDVD and it is fine, even with my burned DVD's. The free MediaPlayer Classic HC plays my discs well too, with full menuing.
    Good luck,
    Hunt

  • ORA-279 signalled during recovery of standby database

    Hi All,
    I am preparing standby database after taking hot backup and copying those datafiles to standby,
    taken controlfile standby controlfile backup from primary
    mounted the standby database using standby controlfile using
    startup nomount pfile='/u01/stand.ora'
    alter database mount standby database;
    Now I have started applying archives on standby database after copying all archives from primary to standby box the archives generated during backup using..
    recover standby database;
    But I am getting the below warning on the recovery screen...
    ORA-00279: change 51667629050 generated at 07/02/2009 00:59:43 needed for
    thread 1
    ORA-00289: suggestion : /nodal-archive/archive/1_55118_652209172.arc
    ORA-00280: change 51667629050 for thread 1 is in sequence #55118
    ORA-00278: log file '/nodal-archive/archive/1_55117_652209172.arc' no longer
    needed for this recovery
    ORA-00279: change 51667703096 generated at 07/02/2009 01:06:04 needed for
    thread 1
    ORA-00289: suggestion : /nodal-archive/archive/1_55119_652209172.arc
    ORA-00280: change 51667703096 for thread 1 is in sequence #55119
    ORA-00278: log file '/nodal-archive/archive/1_55118_652209172.arc' no longer
    needed for this recovery
    ORA-00279: change 51667767649 generated at 07/02/2009 01:12:28 needed for
    thread 1
    ORA-00289: suggestion : /nodal-archive/archive/1_55120_652209172.arc
    ORA-00280: change 51667767649 for thread 1 is in sequence #55120
    ORA-00278: log file '/nodal-archive/archive/1_55119_652209172.arc' no longer
    needed for this recovery
    ORA-00279: change 51667831821 generated at 07/02/2009 01:19:40 needed for
    thread 1
    ORA-00289: suggestion : /nodal-archive/archive/1_55121_652209172.arc
    ORA-00280: change 51667831821 for thread 1 is in sequence #55121
    ORA-00278: log file '/nodal-archive/archive/1_55120_652209172.arc' no longer
    needed for this recovery
    and I am getting the below warning on the alert log..........
    Sun Jul 5 18:37:36 2009
    ALTER DATABASE RECOVER CONTINUE DEFAULT
    Sun Jul 5 18:37:36 2009
    Media Recovery Log /nodal-archive/archive/1_55256_652209172.arc
    Sun Jul 5 18:40:31 2009
    ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
    Sun Jul 5 18:40:31 2009
    ALTER DATABASE RECOVER CONTINUE DEFAULT
    Sun Jul 5 18:40:31 2009
    Media Recovery Log /nodal-archive/archive/1_55257_652209172.arc
    Please suggest what to do now.............
    Thanks in Advance,
    Sukanta Paul.

    Hi Sukanta,
    I didn't really understand what the problem is...
    Let me explain, hope it will be clear.
    You created a standby control file, and backed up the database (it doesn't matter in which order). Now, you have a standby database that is ready to apply logs. It will be able to apply log forever, until we will stop it.
    The messages you see say the following:
    ORA-00279: change 51667831821 generated at 07/02/2009 01:19:40 needed for thread 1 {color:blue} - this says that the recovery process is now at scn 51667831821 {color}
    ORA-00289: suggestion : /nodal-archive/archive/1_55121_652209172.arc {color:blue} - the information needed for the recover is in this file (this is only the default name, you can choose other name if the file is called differently) {color}
    ORA-00280: change 51667831821 for thread 1 is in sequence #55121 {color:blue} - same here, the needed archive is sequence 55121 {color}
    ORA-00278: log file '/nodal-archive/archive/1_55120_652209172.arc' no longer needed for this recovery {color:blue} - this message is after Oracle has applied the log, and it means that this log is no longer needed {color}
    Now it will wait for the next log. Again, this process is endless, this is how it is made to allow the standby database to be always synched with the primary.
    Liron Amitzi
    Senior DBA consultant
    [www.dbsnaps.com]
    [www.orbiumsoftware.com]

Maybe you are looking for