DR8-A2 Firmware 150d flash FAILED! (Drive knackered!)
HELP!!!!!
Anyone know how to revive a dead drive?????????????????????
I flashed my drive with the correct firmware from MSI's site (live update 3 with the 150d firmware) but it crashed half way through and now it won't work at all (won't even open/close). Also - my system doesn't even get past the MSI Extreme 8x AGP logo (before POST).
HELP!!!!
I would appreciate any help you can give. If all else fails i might try sending it back to the supplier i got it from saying its defective (which it is and its cos of MSI's update so...).
Don't suggest floppy bootdisk - as it won't even get there, and besides its a barebones without a floppy drive!
Thanks in advance.
ps - I'm writting this on my other pc (which works fine!!)
Never mind - i've arranged for a replacement now.
thanks anyway.
Similar Messages
-
A flash update failed on my drive and now it can't be detected via BIOS or Windows any way to get it working again or software to restore it. I can reflash it as pure DOS drivers cannot find the CD-ROM and neither can the flash program. :(
I bought a comp from a friend that had a MSI DVD-RW that broke and he sent it in and got a new, this version is DR8-A2 and I flashed mine too and now BIOS doesnt fint it. is this? HELP!
-
Help with flashing the firmware in my optical drive!
Hi!
i wonder if anyone can help me to flash the firmware in my optical drive?
i have never done it before and i dont know how to do.
i got a NEC DV-5700B DVD-rom drive. i know it is not a MSI drive but i am going to use it for my MEGApc 180. and need to flash it to get it working as supposed. i hope.Quote
Originally posted by naw
Hi!
i wonder if anyone can help me to flash the firmware in my optical drive?
i have never done it before and i dont know how to do.
i got a NEC DV-5700B DVD-rom drive. i know it is not a MSI drive but i am going to use it for my MEGApc 180. and need to flash it to get it working as supposed. i hope.
http://forum.rpc1.org -
Hi there,
ive bought this MSI DR8-A burner.
Im having problems trying to flash it with the 150d src.bin file
When i try to flash it with the file in the DOS mode it keeps telling me that its the wrong file for the drive,
The live update does not work with my Epox board.
Yet it is the the correct file .
Im trying to use princo discs but the drive will not reconise the discs.
If anyone has got any idea what the hell is going on it would be much appreciated if you could let me now whats going on
thanks to allSame problem here (except I've got an ASUS mboard)
I've got a problem with my DR8A failing to write to Imation DVD+R (error about invalid SCSI command when finalising disks) so I thought I'd update my firmware to 150D (Currently its 130). However when I try in DOS I get a message saying this file is not intended for this drive. Also the LiveUpdate program doesn't even show any possible updates for the drive, it looks like it'll only update graphic card bios/drivers and motherboards. Any tips or am I doing something stupid?
I even tried unplugging all other SATA/IDE devices except for the DR8A before flashing the drive with no success.
Liveupdate 3.61
MSI DVD DR8A
Panasonic DVD-ROM
ASUS A7N8X Deluxe
Athlon XP2100
512MB Crucial RAM
ATI 9800 Pro -
Intel raid, find the failing (but not failed) drive?
One of my two Seagate drives is failing, I get intermittent system 'hangs', drive clicking, and the following error in event viewer:
Quote
"The device, \Device\Ide\iaStor0, did not respond within the timeout period.
When I built the system I created two volumes from my two hard drives. The first volume is a Raid 1 mirror set for my root drive. The second volume is a raid 0 stripe for my non-important stuff. The two volumes are named "Root_Mirror" and "Data_Stripe"
Here's the problem, How do I know which drive is on its way out? I believe the event viewer error is complaining about the mirrored volume set (iaStor0 = "Root_Mirror" volume?), but how do I prove this? (I am correct in thinking that WinXP talks to the Intel raid controller, the raid controller talks to the hard drives. Consequently WinXP can only report errors about the raid volume, not the underlying physical hardware.
I have a strong background in unix (Sun Solaris) disk and volume management. If this was a work machine, I'd run an "iostat -En" look at the error count for each device, then determine which lun was having problems. Once I know which lun is in trouble, I'd run a health check on the lun via the array management software (RM6 or whatever). I don't see these tools in WinXP or the Intel Matrix driver...
Here is a system report from the Intel Matrix storage console if it helps:
Quote
System Information
Kit Installed: 6.0.0.1022
Kit Install History: 6.0.0.1022
Shell Version: 6.0.0.1022
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 2 Build 2600
System Name: C2D6600
System Manufacturer: MICRO-STAR INT'L
System Model: MS-7238
Processor: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
BIOS Version/Date: American Megatrends Inc. V1.2, 11/08/2006
Language: ENU
Intel(R) RAID Technology
Intel RAID Controller: Intel(R) ICH8R/DO/DH SATA RAID Controller
Number of Serial ATA ports: 6
RAID Option ROM Version: 6.1.0.1002
Driver Version: 6.0.0.1022
RAID Plug-In Version: 6.0.0.1022
Language Resource Version of the RAID Plug-In: 6.0.0.1022
Create Volume Wizard Version: 6.0.0.1022
Language Resource Version of the Create Volume Wizard: 6.0.0.1022
Create Volume from Existing Hard Drive Wizard Version: 6.0.0.1022
Language Resource Version of the Create Volume from Existing Hard Drive Wizard: 6.0.0.1022
Modify Volume Wizard Version: 6.0.0.1022
Language Resource Version of the Modify Volume Wizard: 6.0.0.1022
Delete Volume Wizard Version: 6.0.0.1022
Language Resource Version of the Delete Volume Wizard: 6.0.0.1022
ISDI Library Version: 6.0.0.1022
Event Monitor User Notification Tool Version: 6.0.0.1022
Language Resource Version of the Event Monitor User Notification Tool: 6.0.0.1022
Event Monitor Version: 6.0.0.1022
Array_0000
Status: No active migration(s)
Hard Drive Write Cache Enabled: Yes
Size: 596.1 GB
Free Space: 0 GB
Number of Hard Drives: 2
Hard Drive Member 1: ST3320620AS
Hard Drive Member 2: ST3320620AS
Number of Volumes: 2
Volume Member 1: Root_Mirror
Volume Member 2: Data_Stripe
Root_Mirror
Status: Normal
System Volume: Yes
Volume Write-Back Cache Enabled: Yes
RAID Level: RAID 1 (mirroring)
Size: 100 GB
Number of Hard Drives: 2
Hard Drive Member 1: ST3320620AS
Hard Drive Member 2: ST3320620AS
Parent Array: Array_0000
Data_Stripe
Status: Normal
System Volume: No
Volume Write-Back Cache Enabled: Yes
RAID Level: RAID 0 (striping)
Strip Size: 128 KB
Size: 396.1 GB
Number of Hard Drives: 2
Hard Drive Member 1: ST3320620AS
Hard Drive Member 2: ST3320620AS
Parent Array: Array_0000
Hard Drive 0
Usage: Array member
Status: Normal
Device Port: 0
Device Port Location: Internal
Current Serial ATA Transfer Mode: Generation 1
Model: ST3320620AS
Serial Number: 5QF1FGRZ
Firmware: 3.AAE
Native Command Queuing Support: Yes
Hard Drive Write Cache Enabled: Yes
Size: 298 GB
Number of Volumes: 2
Volume Member 1: Root_Mirror
Volume Member 2: Data_Stripe
Parent Array: Array_0000
Hard Drive 1
Usage: Array member
Status: Normal
Device Port: 1
Device Port Location: Internal
Current Serial ATA Transfer Mode: Generation 1
Model: ST3320620AS
Serial Number: 5QF1G7GE
Firmware: 3.AAE
Native Command Queuing Support: Yes
Hard Drive Write Cache Enabled: Yes
Size: 298 GB
Number of Volumes: 2
Volume Member 1: Root_Mirror
Volume Member 2: Data_Stripe
Parent Array: Array_0000
Unused Port 0
Device Port: 2
Device Port Location: Internal
Unused Port 1
Device Port: 3
Device Port Location: Internal
Unused Port 2
Device Port: 4
Device Port Location: Internal
Unused Port 3
Device Port: 5
Device Port Location: InternalWell, I found a way to identify a failing drive, but it is not pretty..
download Seagate's "Seatools"
burn Seatools to bootable cd
go into bios / Integrated peripherals / on-chip ATA devices / change from "raid" to "ide"
F11 boot to cdrom
run Seatools quick check to almost instantly identify the failing drive.
run Seatools extended test to find a whole SLEW of failed sectors :shocking:
reboot back into bios, Integrated peripherals / on-chip ATA devices / change back to "raid" (pray this won't blow away your data, which it didn't but you don't know that until you do it once
setup RMA refund thru Newegg, order replacement drive, and hope new drive makes it before old drive goes belly up.
while patiently waiting for new drive, sit in amazement that the Intel matrix driver ignores all the errors that Seatools found in a matter of seconds..
Here's a question. Should I be pissed that the Intel raid controller isn't reporting a bunch of errors, or should I be excited that the Intel raid contorller can keep a raid 0 stripe functioning with a clearly failing disk drive. (is it a bug or a feature????)
{sigh} -
Is it possible to replace a failed drive with another unused hard drive within an ix12-300r
I have an ix12-300r with a failed drive in a storage pool - I want to replace the failed drive with one of the other drives in the NAS that are unused (i.e. not part of any other storage pool)
i.e. Storage Pool consists of 3 drives - disk 1, disk 2 and disk 3.
Disk 3 has failed.
Disk 4 is free and not used by any other storage pool.
Can Disk 4 be pulled out and then put into the place of Disk 3?
(All disks are the same model/size/speed)Hello cayliffe
Yes! In you case disk 4 would be usable as a replacement for disk 3.
You can remove disk 4 and put it in bay 3 if you wish, however you should be able to set the ix12 to use unused drives as hot spares so the firmware switches to the disk automatically. In Drive Management > Settings the "Use available drives as hot spares" option will allow your device to use any compatible unused/available disk as a hot spare for any of the storage pools.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
Failed Drive: Trying to install New Drive in 7 Disk Array
We are set up on an Xserve RAID with 1-7 (250G, RAID 5) as one array, and 8-10 (400G, RAID 5) as as second array. In our first array of seven, drive 6 failed.
We purchased a Hitachi Deskstar 250G ATA/IDE internal drive to swap with the failed drive. We did not purchase this through apple.
We swapped the drives and put the new HD in the 6th port. NO GO. We placed the dive on port 11 as its own and the drive reads fine (as a spare).
How do we add this drive to the 7 disk Array?I think yes, you have to find someone, who is able to read service parts of the disks. Apple's 'special' firmware is written here. The way is read this firmware from original disk and write it to non Apple disk. You will not be able to do this without special tools. Company which does data rescue from crashed disks can do this job for you. But as was written before, disk size must be identical with original drive.
Leos. -
Boot Installation media from USB flash/Pen Drive?
Hi there,
The hardrive on my X60 died. Died so badly that even Resue and Recovery wouldn't start yet alone Windows (even in safe mode).
I have a new hard drive and installation media en route from Lenovo (laptop was under warranty)
The problem is that the installation media is on CD/DVD and my laptop does not have an optical drive.
So my questions are:
1. Can the installation media be installed from a USB Pen/Flash drive? (the BIOS does support USB booting)
2. Does anyone have experience of this or instructions?
On a side note I find it slightly irritating that even under warranty Lenovo won't supply me software/hardware that will return my laptop to its original state without the user, me, potentially having to buy an external optical drive. The warranty support chap said "you'll just need to buy an external USB optical drive" - *sighs*
Cheers
LawrenceTnx 4 ur reply RX-8.
I bought the lappie used. It had BIOS ver. 103 when I bought it, so I upgraded to ver. 111 and it kept on booting from pen drives just fine.
A few days after I bought it, the internal HDD failed with S.M.A.R.T. ID 5, something about reallocated sectors count. I got an exact replacement for the dead HDD. When I installed it, I unplugged the lappie's battery, then plugged the battery back in before I buttoned it all up. I think THAT was the start of my USB flash pen drive boot problem.
The new HDD is fine. It passes the HGST Drive Fitness Test with long SMART test, which takes between 2 and 3 hours.
I tried the EC update. Inside the zip file was a TXT file with a link to an MSI page that has a PDF file on how to do the EC update. I had that PDF open on another machine when I did the EC update so I could follow the instructions exactly.
After an F9 on the UEFI screen to restore defaults and an F10 to save the UEFI config, I rebooted and everything seemed OK. I then used a pin to force a reset. For the second time, I unplugged the lappie and waited a few minutes for the EC memory to clear.
I still have the same problem. I can't boot from a USB flash pen drive.
I'm enclosing shots of my USB config with XHCI enabled and disabled. I tried to boot from a pen drive with both XHCI settings. No joy. Will I ever be able to boot from a USB flash pen drive again?
I should also mention that I have a portable HDD with a USB 3 interface that boots just fine on other machines but won't boot on the GS60 Ghost. The LED on the portable HDD comes on and the lappie screen just sits there with a blinking underscore cursor. -
HP Pavilion P6 2120 says - Failing drive
My Pavilion P6 2120 is only 18 months old. This morning I got the message: 1720-SMART Hard Drive detects imminent failure Failing Drive: SATA1 Failing Attribute: #05
I'm running Windows 7. This is a home system. I'm at a loss as to what is happening and why, and what needs to be done.
Any help?
Thanks
Ann MarieWell... with mechanical hard drives, unfortunately, it is a possibility. HP does try hard to use hard drives from manufacturers with the best track records and lowest rates of failures... probably the best in the biz when it comes to mass produced PCs, but hard drives (and optical drives) DO fail. Because they have platters that spin at extrememely high revolutions, they will eventually fail. Hard drive and optional drives and CPUs are a good reason to purchase extended warranties for PCs...especially notebook PCs. This is just advice...I agree with you it sucks. I've worked with about 50 PCs over the last 20 years - I've had drives last 1 month and some lasted 12 years plus.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you. -
How to recover data from failed drive that's part of mirrored raid
Hi Guys,
hope to get help from someone knowledgeable out there. I have a macpro and recently experienced a failed drive. I set up that failed drive as part of a mirrored raid, this set is not my primary drive and so my computer is stilling up and running but now am wondering how I access the data from the mirrored drive. Should the mirrored drive automatically mount on my desktop whereby I would be able to access the files? This is my first drive failure and I was under the impression having a mirror would duplicate my data and allow me to access it in situations like this. I'm a bit of novice in this area and not sure if the data is truly on the "mirror" or if there are things I need to do.
I launched disk utility and was able to see the mirrored drive and I selected "mount" drive but it would not mount; I then selected "verify" and got "unrecognizeable filesystem" Is this normal? Am I suppose do something to get access to the mirrored drive? Do I install a new drive in place of the failed drive and expect the raid to rebuild automatically whereby I then see the data?
Your help is much appreciated.Even with a mirror, you still need a backup.
Along with Disk Utility, you still need 3rd party (TechTool Pro 5, Disk Warrior 4.1.1+).
And if you like to use RAID and esp mirror RAID, consider
http://www.softraid.com which is a step above (the pdf guide, manual you can download and they have a demo, so worth the read). SoftRAID can also import/convert an Apple RAID to its own format which has been known to recover drives and data. -
In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?
Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks -
My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. The Office package was installed/included when I purchased the Mac. Does anyone think Apple will provide me with the Office package? Thank you!
Thank you everyone. I apologize to confusing all but I am up to date and running OS X 10.8.2. It's possible I purchased the key for Office but I don't think so although it was 3-4 years ago. I guess I will stop in the Apple Store and just ask. I may just buy the new bundle anyway to get the most updated.
I have read there are issues with the MS Office bundle running on our latest OS, is that true?
Thank you all!!! You've been great! -
HT1338 How to install OS X on a new HDD to replace a failed drive?
My sisters MacBook (Late 2006) HDD has failed. I have a spare drive that I would like to install OS X onto to replace the failed drive. Whats the best way to do this and which version of OS is best to install for this model MacBook?
Hello, it'd be best to use the Original Install Disc while booting the MacBook from it, but a Retail 10.6 Install Disc may work...
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57 -
Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas
It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction. -
How do I force a Mac Pro Lion RAID 5 rebuild after replacing a failed drive?
Hi,
My Mac Pro RAID 5 (with Apple RAID controller card and RAID 5 volume with 3 hard disks) showed degraded RAID set message due to failed drive. After I repalced the failed drive, I was unable to add it back to the RAID set. So I tried to removed or deleted this RAID set so that I can rebuild the RAID set from scratch. No matter what I did, I was unable to delete the RAID set using the RAID Utility. Can anyone help? Thanks.I have been posting in this forum several times yet I was not getting any help nor comment on my issue from anyone (except Grant above. Thanks and appreciate your support).
So I have to help myself by searching various ways to resolve the issue. I accidentally came across below findings and it solved my problem. So I thought I will post it here just to share with whoever may run into the same problem.
When I was trying to try to change to another harddisk, I noticed that I made a mistake in mixing up the drives when I put them back. That is for the last two drive bays(3 & 4), for some reason I put the disks backwards. That is drive 3 in Bay 4 and drive 4 in Bay 3. I did not realize that on the drive mount Apple actually labelled them as 1, 2, 3, and 4 respectively for Bay 1 through Bay 4.
With the two disks installed in the wrong sequence and even though one of them is a replacement disk, Apple RAID controller card still boot up the RAID set but showing degraded RAID sets and everthing is normal except it would not allow you to make the replacement disk as a global spare.
After I put the disks in the correct order, I was able to use RAID utility to make the repalcement disk as a spare and the system starting rebudiling the RAID set automatically (thought it took three days to complete).
Now my system is back to normal working. So the solution is to insure the disks are installed back to the Mac Pro in the same order (sequence including the replacement disk) when the RAID was set up. This is such a basic matter and I don't know how I missed it. Hopefully sharing this experience will help someone who may have similar problem. At lease this is the first thing to check before going any further.
Maybe you are looking for
-
I have a late '09 iMac 27" Quad Core i5. Almost every time I go to boot, I hear the hard drive spin up and then nothing, just a black screen. No beeps, just black and near silence. it does this about 95% of the time. Here's the kicker, if I take RAM
-
can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?
-
How to compile my java application for Personal Java??
i write a simple program and want to run it in PJEE. program is: import java.awt.*; public class TestApp { public static void main(String[] args) { Frame f = new Frame(); f.pack(); f.setSize(300,300); f.show(); and i compiled it using JDK1.4 javac Te
-
Lion Server install failed - yet still labelled as installed in MAS
On my lion test machine, I decided to test Lion Server, so I of course got the redemption code, popped it all in. When the actual "download" started - it instantly said it was complete - I never saw the download icon in the dock for it. Under MAS Pur
-
Powerbook Titanium/G4 need compatible USB PCMCIA USB 2.0 card
I have a G4/Titanium Powerbook and acquired a new iPod Nano (4th G). It requires a USB 2.0 port to synch/recharge, but my Laptop only has USB 1.1. I thought that a PCMCIA card would remedy the situation, but when I purchased one from SIIG, I was told