Draft Documents View is empty for a specific user

Hi,
For a specific user, when he goes on the Document Draft Reports, the Sales Document sub-form is empty. Meaning that when he ticks the "Sales Documents" option, the boxes to choose specific Sales Document does not exist (e.g. Sales Quotation, Sales Orders etc.). This happens no matter what are the other options (e.g Open Only or User Option).
The other lists (Purchasing and Stock) are working properly. Again, all the other users do not experience the same issue as the form is working properly
The installation is on 2007A SP01
Any ideas?
Thanks in advance
Gerasimos

Hi Gerasimos.......
I'm sure this is a Bug in your system. If you have any of the adons then please Disconnect it and also try to create new Super User and give him license and then check with this new user for the same output.......
Else I'm afraid you need to raise a support ticket to SAP.......
Regards,
Rahul

Similar Messages

Process view is empty for imported legacy app

Hello,
The process view is empty for an imported legacy app (ES1). Platform is JBoss turnkey on Win 7. Did the following: (a) Imported legacy LCA, (b) created application, (c) imported process into application, (d) check-in application and (e) opened process in editor.
The process editor is blank. Thank you for insight on this one. jb1809

[Problem Solved] Discovered that I omitted a step...did not refresh the Application View for the new legacy application. After refreshing the application view, the process editor displays the process diagram.

Adobe reader 11 wont load signed feature for a specific user on VDI

Hey all,
New to the forums so please if i mess something up let me know.
We Run xendesktop 5 for our vdi systems and we have one user, only one user, that when they load the adobe reader there sign document feature does not load what so ever, i have tried multiple test accounts that have same permission and it loads just fine, other users running same desktop the feature loads just fine. i am really baffuled as to why the feature will not load for this specific user. just a troubleshooting note, i had the user log into a physical machine with the same adobe reader version and the sign feature loaded for them just fine, its only in the vdi system where it will not load. Any suggestions would be greatly appreciated.
Thank you!!!

Kyle
could you attach any screenshots ? one when it works fine and the other when it doesn't - so that the issue can be understood better.

Interactive report gives an error only for a specific user

An interactive report based on a very complicated select gives an error only when a specific user is logged on.
The error is:
ORA-00932: inconsistent datatypes: expected - got CLOB.
For other users logging using this page it works fine.
Authentication for this application is done using a stored function.
The query does not use the current userid in it.
Why does it fail for a specific user? if there is a problem, it should fail all the time.

Hi ankur,
By what you said the report dont have any date parameters or no date columns.
"Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
select to_date('01-DEC-06'),to_date('01-12-06') from dual;
Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
Hope its helpful.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

Extract the userID that set a role for a specific user

Hi all @SAP Forums,
I'm going to write a simple report to extract some information about users and role assignments in the system I'm working on.
The requirements is quite simple; for every user in the USR02 table, I have to extract some info about the roles the user has.
In order to do so, it's quite straightforward to find roles for a particular user looking into the AGR_USERS table, but ... I'd like to know if there's a way to find the user who set the role assignment for that specific user; the problem is that I cannot find that information in any AGR* tables, so I start to think it's not a stored information I can retrieve in any way.
Any hints/suggests you can give me? Thanks in advance.

Hello muthu,
useful link to refer to when I'll need to extract a full username (first and surname) for a userId. But the question, forgive me if I've been not-so clear, was different.
A (key) user, say A123456, sets a role for another user (A00000) in SRM... let's suppose now A00000 becomes a buyer. I'd like to know if there's a way, starting from the user A00000, to understand WHO had given him his role (in this case, A123456) and WHEN... I can see the CHANGE_DAT field in AGR_USERS about the "when"... where can I (if I can, obviously) find WHO set the role for A00000 ?
Thanks again, sorry if I've been not that clear in explaining

Open Posting Period only for some specific user?

Dear all,
does someone have any idea, how could a posting period in ucmon be opened only for several specific user?
Is that possible?
Many thanks.
Hallochen
Edited by: hallochen on Sep 22, 2011 2:45 PM

Depending on the requirement
May be you can open it for a specific Cons Group(assuming User has authorization for that group) which translates back to opening it for specific user only
If user needs to work on more than 1 cons groups & has authorization then a step by step approach will help
rgds
D

Force learner to view a slide for a specific amount of time

In Captivate 5, is there a way to force a learner to view a slide for a minimum amount of time -- and to grade them on viewing for that amount of time?

Let's say that you need the user to stay on a slide for a minimum 30 seconds. Here are two ideas:
Idea One: Delayed Navigation Buttons
Set up the Captivate slide so that when the user initially lands on the slide there is no navigation on that slide. (This means the playbar can't be on that slide either.)
Set up the "next" button to appear when the playhead reaches 30 seconds on the timeline.
This will ensure the user stays on the slide for at least 30 seconds because there is no other way to move ahead. ( I'm a little unclear about how your grading system works, however, perhaps the "Next" button could also have points associated with it that you could use for grading purposes.)
Idea Two: Points Attached to a Button
When the user arrives on the slide, they are told they need to click a specific button in order to get points; however, that button will only appear when the user has been on the slide for 30 seconds.
In this case, the button could also have a point value which you could use for grading purposes.

Publishing a list with specifics views anf filters for all the users to see it.

Hi i was working on the item level permissions of a list which are accessed by all users.
I have applied the item level permissions for specific users having specific records to work with.
Now, there are situations when we need to show all the users all the data but in read only mode.
How do i work on the report so that the user can actually only see the data.
The Admin will pick the list with a specific view and apply filters and then expose it for other end users to view.
How do i achive that?

Hello,
How did you set item level permission? I mean, list "advanced settings" OR manually edit the items permission by breaking the permission.
If you have broken the permission and user doesn't have permission on items then there is no way to show item to users. You must provide at least read access to view the item.
In you case, you can give contributor right to everyone on all items (by inherit parent permission) then go to list settings page-->advanced settings-->then set item level permission as shown in pic:
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Can't retrieve folder privileges for a specific user

I am trying to get the granted privilege for a specified user for a certain folder. I am using the wwsec_api.get_granted_user_privilege function. When I run my code, nothing is ever returned. Here is my code:
l_priv_varchar := wwsec_api.get_granted_user_privilege(
p_user_id => 0,
p_object_type_name => 'FOLDER',
p_name => '2889');
p_user_id is from wwsec_person.id$
p_object_type_name is my object type
p_name is from wwv_corners.id
I have looked at the properties of this folder and this user, 0, is set up as the owner. So I am expecting to see 'OWN' returned. I have another user set up to only VIEW the folder and when I put that user's id into the p_user_id parameter I still do not get any return. I can run this same code (with different parameter values) and get the privileges for a 'PAGE', but never for a FOLDER.
Does anyone have this problem or can tell what I am missing?
Thanks.
null

p_name for a folder is "sitename/parentfolder/foldername". You can see that in the syspriv_name field on the WWV_CORNERS table.

Creation of transport rule to send all external mails through a particular server for a specific user..

HI,
In our Organisation We have a question, is there any possibility to create a transport rule for sending all external mails through a particular server by a specific user.
in our organisation we have exchange 2007 one mailbox server and two hub transport servers...and we are using symantic gate way..

Hi,
Based on my knowledge, we can use the following transport rule to make that except with one user, other users cannot send outbound external emails:
And I’m afraid that there is no Exchange feature to make one specific HUB server rout all external emails.
Because if a Send connector is configured to send messages to an external domain, any Hub Transport server in the organization will route a message for that domain to a source server for that connector to be relayed to the destination domain.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

How to pop up a system message for a specific user when She/He log on SAP

Hi Friends,
As we know SM02 setting will pop up a system message to all users in specific client in a specific period when the user log on SAP system; and we can do the same thing via using function module SM02_ADD_MESSAGE.
But now we want to pop up a message to a specific user ID when somebody log on SAP via this ID, instead of all user IDs in the client. Please do we have any similar traction / function module / class method to to do this job??
Thanks in advance.
Joe

Below code can be used to send a pop up message to all users who are logged on to the
system.
DATA: MESSAGE(128) VALUE 'Test message'.
DATA: OPCODE TYPE X VALUE 2.
DATA: BEGIN OF USR_TABL OCCURS 10.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
ID 'TAB' FIELD USR_TABL-SYS.
LOOP AT USR_TABL.
CALL FUNCTION 'TH_POPUP'
EXPORTING
CLIENT = SY-MANDT
USER = USR_TABL-BNAME
MESSAGE = MESSAGE
EXCEPTIONS
USER_NOT_FOUND = 1.
ENDLOOP.
In the above code just pass the desired user ID instead of All user ID's
Edited by: harsh bhalla on Mar 26, 2009 2:14 PM

SharePoint Desinger 2013 Workflow canceled automatically for a specific user

Workflow canceled automatically. I have three users KMSLS,KMSCO,KMSQA who triggers the list workflow at different levels.
KMSLS has full control
KMSCO and KMSQA has contribute permission.
KMSLS is able to initiate the workflow and emails are getting sent when a new item is created in the list.
but I am Workflow gets canceled automatically by user KMSCO and KMSQA. I even tried to give full control to these user but getting same error as below. Please help me...
RequestorId: 9cc0cb81-736c-3628-4115-00a1125754b6.
Details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."}
{"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating the request.\";category=\"invalid_client\""],
"SPRequestGuid":["0293311d-2376-455c-b73b-73d5e2769e0e"],
"request-id":["0293311d-2376-455c-b73b-73d5e2769e0e"],"X-FRAME-OPTIONS":["SAMEORIGIN"],
"SPRequestDuration":["49"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],
"WWW-Authenticate":["Bearer realm=\"b94af3aa-2759-48a2-a325-866271feda63\",
client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]71feda63\"","NTLM"],"X-Powered-By":["ASP.NET"],
"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1; RequireReadOnly"],"Date":["Thu, 30 Oct 2014 10:54:29 GMT"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
V.S.

Hi Vikas,
Please check and make sure your User Profile service and User Profile Synchronization service are running, then start a full user profile sync to make sure your users are in user profile service, then check if the workflow is still auto canceled for those
two users with contribute permission.
Here are some similar posts for your reference.
http://anujabhojani.blogspot.in/2013/02/sharepoint-2013-workflow-gets-canceled.html
http://www.sharepointviking.com/system-unauthorizedaccessexception-when-running-sharepoint-2013-workflows/
http://sharepoint.stackexchange.com/questions/90740/workflow-2013-throws-an-error-on-start
Thanks
Daniel Yang
TechNet Community Support

Possible to delete Offline Files content for a specific user from the Client Side Cache (CSC) ?.

Hello Everyone,
We would like to implement a script to delete the offline files in the Client Side Cache (CSC) for a nominated user (on Windows 7 x64 enterprise).
I am aware that;
1. We can use a registry value to flush the entire CNC cache (for all users) next time the machine reboots.
2. If we delete the user's local profile it appears that Windows 7 also removes their content from the local CSC.
However, we would like to just delete the CSC content for a particular nominated user without having to delete their local user profile.
In our environment we have many users that share workstations but only use them occasionally. We don't use roaming profile so we would like to retain all the users' local profiles but still delete the CSC content for any users that haven't
logged on in a week.
Any ideas or info would be appreciated !
Thanks, Makes

Hi,
I don't think this is possible.
If you want to achieve it via script, I suggest you post it in official script forum for more professional help:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support

Fireworks CS5.1 will not run for a specific user.

I am in the IT dept. of my organization and we have Adobe Creative Suite 5.5 installed on many systems. On one particular system, we installed the CS5.5 Web Premium suite and when the end user (who is not an administrator on their workstation) started to use it, she found that Fireworks CS5.1 will not load. When she clicks on it to launch it, it starts to load, then she gets the spinning beachball and the application stops responding.
I created a local (non-AD) account on her machine with admin privileges, and when she logs into it, Fireworks immediately loads and works properly.
Our security rules do not allow users to operate as administrators on their workstations. So my question is - what can I do to get Fireworks to load and run properly for a standard user account?
Interestingly, all other CS5.5 apps seem to work just fine for her.
Bob Reed

Have you tried giving the user administrative privileges?

How to block standard view for a specific user

dear all,
I need to block a specific standard view v_tvbur for a user group.
Which kind of attributes I need to change?
I try to search with transaction SOBJ but i didn't fixed the problem.
Other question: there's other attributes which control the transport request creation on the system? Is it possible to choose the view that I need to consider on a transport request?
Thank you in advance
Enrico

Hi,
What do you mean by changing attributes?
To secure access to certain tables or view tables, use auth Object S_TABU_NAM. Check what authorization group is table TVBUR is assigned ( check in table TDDAT). Don't provide access to the authorization associated with this table in S_TABU_DIS.
Again, what do you mean by attributes that control transport request?
Access to transports can be controlled by auth object S_TRANSPRT.
Hope this helps!
Thanks, Deb

Draft Documents View is empty for a specific user

Similar Messages

Maybe you are looking for