Draft forms in Queue do not have naming convention

When a form is saved as a draft, there isn't any naming conventions such as the Task Display Name, Process #, or Task #, etc. Is it possible to include some type of naming distinction in the draft forms?
We have multiple forms in Draft and when I need to open a specific form, I must open each form to find the specific form.

Search Templates should help here : LiveCycle ES2.5 * LiveCycle ES2.5 Administration Help
It shows the tasks saved in Draft as well :
Thanks,
Wasil

Similar Messages

How do I remove a secondary apple id from my Mac? I am being prompted for a apple id password for a former user; I do not have the information. Prevents updates from App Store.

How do I remove a secondary Apple ID that is not in use from my MacBook pro? The ID does not belong to me and when I attempt to download updates from App Store with my Apple ID, I am prompted for the password of the secondary Apple ID.

Is this a second hand Mac? If so, you need to erase the Mac and install the version of OS X that shipped installed on the Mac from the factory. Then you set the Mac up as new with your Apple ID.
User Linc Davis explains how a new owner can prepare a 2nd hand Mac for their own use.
https://discussions.apple.com/message/25468326

I do not have permissions to trash files – tried everything

When I try to delete a .jpg in Adobe Bridge CS4 or in Finder, the former says I do not have permissions, the latter requires me to enter the admin password. In fact, trying to delete any file in Finder requires the admin password.
This started happening in Snow Leopard, and continues following my upgrade to Lion. Extremely annoying!
Tried and failed 1
Cmd-I (Get info) on my home drive and resetting permissions.
Tried and failed 2
Using Terminal whilst logged in to reset permissions over Trash, namely:
sudo chown your_user_name .Trash
Tried and failed 3
Turn on the Mac whilst holding down cmd + R. You can let go once you see a spinning dial. You will then see the ”Mac OS X Utilities” screen.
On the top menu, click Utilities, then click Terminal.
Type resetpassword and press Enter.
Click on your main hard drive.
In the dropdown box under “Select the user account” make sure to select your username.
Underneath where it says “Reset Home Directory Permissions and ACLs”, click the Reset button.
Tried and failed 4
Upgrading to Lion.
Tried and failed 5
Going to make a cup of tea.
Tried and failed 6
Really hoping really hard.
Any ideas? I've invested two hours on this support forum so far, but can find nothing else to try.

Thanks for the suggestion Eric.
This fault appeared when I was running Snow Leopard, and the upgrade to Lion didn't fix it. May I ask what makes you think having another go at installing Lion would do it?
Saying that, I've found this article, Volume corruption may cause permissions problems in OS X, recommending I reformat the disk drive and then reinstall Lion. Sounds a bit drastic and onerous just to fix this little (albeit annoying) problem!
Worth a go? Or shall I wait another couple of days to see if anyone comes up with a simpler fix here?!

VC models...BeX naming conventions

Hello,
I have a problem in VC...with naming conventions.
The base Bex queries were not followed Naming Conventions and the VC models were completely designed based on the queries.
Now the management had decided to move the content only with naming conventions...from Bex we can do the query as Save As in a simple way. What about VC? Can we do it similar...i dont think so. Can someone help me with the best solution how to solve this issue.
what i did: I took the copy of VC model and added new datasource (Bex new query followed naming convention). Then i try to drag the input and output links to the new datasource i cant able to do that, is there a best way? my other question is if i change the links from old datasource to new datasource then all the fields and values for the rest of the model are blanked (not copied from the previous model). How to best solve this issue? Please advice...and consider this as high priority.
Note: If there is no solution to my question, how could SAP develop the tools with out thinking these constraints during the Product development. I feel like strange...please respond.
Thanks,
Pandu
Edited by: pandu on Jun 15, 2010 12:29 PM

Hi
I have a doubt regarding your requirement.
If you are creating new Bi queries, (with Save As) so what your are going to do with existing queries? If not, you can continue with same VC model, you just need to change model name as per convention.
Also for the second point you mentioned, VC is just for arranging the layout of the dashboard & the layout will remain same even if you delete exisitng queries & add new queries. Also the Data service (BI Query in this case) is a foundation of VC model & all other things like Input/ Output Form/Table are with reference to data service. So if you are deleting data service obviously all values will get reset. There are few constraints in VC but i dont think this is a constraint.
If possible, follow the naming convention in discripption of query for earlier queries which will not lead to duplication of efforts for earlier queries & Vc models. & You can start following naming convention for new queries.
Regards
Sandeep

I use pages to draft forms that i repeatedly use in my business. Last week i drafted a legal document and saved to my file. now i get message that it won't open without newer version of pages but i have the latest version whats up??

I use pages to draft forms that i repeatedly edit and use in my business. Ex: letterhead, envelopes, and legal forms. I recently drafted a legal form
for a client. saved it and then reopened and printed the next day. now when i try to open that form, ( or letterhead or envelope) i get a message that
it wont open and that i need a newer version of pages. but my pages software is up to date. Whats up with this??

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Editing a pdf form that I created. Adding header error msg "do not have sufficient permissions to perform this task"

Editing a pdf form that I created. Adding header, currently the header only appears on page 1 of a 3 page pdf form. I want it to appear on each page. I am receiving the error msg "do not have sufficient permissions to perform this task"

In Adobe Acrobat use a Action for this.

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

Thanks,
Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
But thank you for your reply!

I was wondering can i install windows on my mac when i have downloaded windows form the internet and do not have a C.D.??

I was wondering can i install windows on my mac when i have downloaded windows form the internet and do not have a C.D.??
Because when i get to the part in Boot Camp Assistant that says Start Windows Installation it says u need a disc... is there no other way??

Get the physical copy (disk) this will enable you to reinstall when (not if ) it messes up.
Make sure to purchase acopy that is compatible with your OSX

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for thos

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?

Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well...

HT4623 in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyo

in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help

stell80 wrote:
in settings and then general i do not have the option of software update...?
That is only present if you have already updated to iOS 5 or later. If you're on iOS 4 you can only update while connected to your computer's iTunes.
stell80 wrote:
How do I know if I am on IOS6
Settings/ General/ About
stell80 wrote:
I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
You can't access iCloud from your iPhone unless you're on iOS 5 or later. Otherwise, refer to this article:
http://support.apple.com/kb/HT4436

In using Adobe Acrobat 8 Professional I have added oval shapes to a form, but they do not print. How do I get all shapes to print?

In using Adobe Acrobat 8 Professional I have added oval shapes to a form, but they do not print. How do I get all shapes to print?
I am using a Dell PC with Windows 7 Professional as the Operating System.

File > Page Setup = Scale
The Scale control is what controls the size of what is printed to paper. 100% is usually the best setting.

Why can i not convert a form to PDF when I have an active account and it wants me to sign up for an upgrade?

Why can i not convert a form to PDF when I have an active account and it wants me to sign up for an upgrade? This just started!!!!!!!!

Hi EdAAK,
I've checked your account, and see no issues with your subscription. So, if you're using a web browser, please log out, clear the browser cache, and then log back in to https://cloud.acrobat.com. And, if you're using Reader, make sure that you're logged in—you should see your name listed in the upper-right corner. If not, click the Sign In link and then sign in with your user name and password.
Please let us know how it goes.
Best,
Sara

Problem configuring Adobe Forms: ADSUSER does not have access to method...

I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...

Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif

CMP : Table does not have a column named ...

Hello All,
The following error is generated while verifying CMP bean before deployment with asant tool.
The table and field are present in the database, is there any way to debug whats wrong?
Error:
The table XYZ does not have a column named ABC
Test Name : tests.ejb.ias.cmpmapping.ASSunCmpMappingTest
Test Assertion :
Test Description : FAILED [JDO-GEN-CMP-Validation] : Unexpected exception occured while initializing JDOCodeGenerator, for the mapping file [ META-INF/sun-cmp-mappings.xml ], of the ejb archive [ SchemeEJB ] .Check stacktrace for details :
[ java.lang.RuntimeException: The table XYZ does not have a column named ABC[/b]
The following error is reported. But in reality there is a column name(ABC) in the table(XYZ).
Thanx in Advance
Rgds,
Girish.
Here is the cmp-mapping.xml we are using
<sun-cmp-mappings>
<sun-cmp-mapping>
<schema>SchemeEJB</schema>
<entity-mapping>
<ejb-name>SchemeEJB</ejb-name>
<table-name>SCHEMES</table-name>
<cmp-field-mapping>
<field-name>schemeDeptCode</field-name>
<column-name>SC_DEPT_CODE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeCode</field-name>
<column-name>WF_SCHEME_CODE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeEnName</field-name>
<column-name>EN_NAME</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeUcdName</field-name>
<column-name>UCD_NAME</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeStartDate</field-name>
<column-name>START_DATE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeEndDate</field-name>
<column-name>END_DATE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>isActive</field-name>
<column-name>IS_ACTIVE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>enShortDescription</field-name>
<column-name>EN_SHORT_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>enLongDescription</field-name>
<column-name>EN_LONG_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>ucdShortDescription</field-name>
<column-name>UCD_SHORT_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>ucdLongDescription</field-name>
<column-name>UND_LONG_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>sponsererCode</field-name>
<column-name>SPONSERER</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>userId</field-name>
<column-name>WS_USER_ID</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>createdDate</field-name>
<column-name>WS_CREATED_DATE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>lastModified</field-name>
<column-name>WS_LAST_MODIFIED</column-name>
</cmp-field-mapping>
</entity-mapping>
</sun-cmp-mapping>
</sun-cmp-mappings>

This is almost always the case when using CMP and the schema hasn't been updated after adding the new column to the database. This has happened to me multiple times in the past month.
I'm referring to the <schema> element under the <sun-cmp-mapping> element in the sun-cmp-mappings.xml deployment descriptor that's generated from the capture-schema utility.
I'm 99% certain this is what you're encountering.

Draft forms in Queue do not have naming convention

Similar Messages

Maybe you are looking for