Drafts are not moved out of drafts folder
A strange thing started happening recently on my Mac. When I send an email the email message remains in the Draft folder after it is sent. It shows up in the Sent folder, but still remains in the Draft folder. Anyone else having this problem?
My Draft accumulates 5-8-10 drats of same email- ALL while I am on email and working on the email. After sending the em I am left with 5-8-10 drafts that I have to go delete- and the delete is slow- thx, regards
Similar Messages
-
After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?
Are you storing Drafts, Sent, Trash and Junk messages on the server via your .Mac account with Mail?
If so, do you access your .Mac account with an email client on another computer or regularly access your account via webmail on another computer?
If not, any other reason you need to store Drafts and Sent messages on the server?
While composing a message with Mail, it is temporarily saved in the account's Drafts mailbox so sounds like something went wrong with the process between finishing and sending the message with Drafts and Sent being stored on the server.
If you don't have any need for this, better to store Drafts and Sent messages locally on the hard drive with Mail. -
Messages are not moving to Error Queue in OSB if Error is Raised
Hi All,
My OSB process is as below.
Queue1-->OSB-->Queue2.
OSB Proxy is listening to the Queue1.When messages comes to Queue1 Proxy will pick the message and after applying the business logic it will put the message to Queue2.
If OSB is not able to deliver the message succesfully to Queue2 then it should retry for 2 times.If retry exhausted then the message should move to the error Queue.
I have configured Queue 1 with delivery failure paramaters redelivery limit and redelivery delay.Also the Connection factory is XA enabled.Even if any error happens (i am not using reply activity in the error handler) its retrying infinitely and messages are not coming to the error Queue.If i use reply activity its not retrying its failing at first time and the message is moved out of the main Queue1.
Can any one please help me on this?
Thanks.
Edited by: 892479 on Dec 21, 2011 6:31 AMSince the messages are getting retried, it means that messages are getting rolled back to Queue1 when any errors happen. So transactional behavior is configured correctly.
Now the problem yu face is that the messages are not moving to error queue.
Make sure that you have configured following in the delivery failure tab of the queue>
Redelivery Delay Override - delay in miliseconds between retries
Redelivery Limit - number of retries
Expiration Policy - Redirect
Error Destination - Choose the error queue here
After that make sure that the Server is restarted, even though a server restart sign is not mentioned on the config page, some of these settings might not take effect without a restart. -
HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
THANKSIf you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
[B]Follow these steps to Transfer photos from iPod to Mac[/B]
Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
Step 2. Connect iPhone with Mac
Step 3. Hit "Photos" to scan photos from iPod to Mac
Step 4. Click "Photos" button to transfer photos from iPod to Mac
Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
How to Transfer/Copy Photos/Pictures from iPod to Mac computer -
Hi,
Sorry if this has been covered before.
I deleted some photos from both 'Photos' and 'Photo Stream' using my iPhone. They are not in my 'Photo Stream' folder on my PC, but do they go to the Recycle Bin or just disappear altogehter?
Thanks.I am afraid not.
Photo Stream is a sync tool and not a backup solution.
If you change the Photo Stream on one device it pushes those changes to all devices.
Here is some more information about Photo Stream:
iCloud: My Photo Stream FAQ -
Out of Office Messages are Not Sent Out
Hi there,
I have an issue with Outlook's Out of Office feature. The Out of Office messages are not sent out (to both internal and external contacts) although it has been already turned on. Only one user is having this particular issue.
I've attempted these steps but the issue still persists.
a) Turning on OOO via OWA
b) Deleting the current profile and creating a new profile
Could anybody help me in this?
Regards,
VinodHi Vinod,
You issue might be related to this:
"By default, the out-of-office reply to Internet recipients (external senders) is turned off. Many administrators do not allow out-of-office replies to be sent outside the Exchange Server organization, so that unauthorized people do not
know when users are out of the office. "
You might want to follow the steps in below KB article to turn on out-of-office replies to the Internet or contact your administrator to check so:
http://support.microsoft.com/kb/323665/en-us
Hope it helps and feel free to post back.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Uploaded blobs are not moving to RBS storage even RBS is enabled for this content db
Hi
In a production environment RBS is configured for SharePoint content dbs ,
and sql server has failover clusters and alwayson
Now each content db size is very huge : mdf file : 617 GB and .ndf file292 GB
and RBS Storage is : 4,742,795 Files, 117 Folders and size is 1.35 TB (1,494,447,389,036 bytes)
and web application content organizer is enabled and
daily many users upload documents to this web application
here my issue is when user upload documents these docs are saving in content db, but no count of files increased in RBS
storage
when I run below two queries
Selectcount(*)fromAllDocstreamswhereRBSIDIS
NOTNULL
its showing every time( 417 7813 ) its not changing every time I run the query
Selectcount(*)fromAllDocstreamswhereRBSIDIS
NULL
when I run this query the count of files are increasing every time
count of files now is149 239 and its keep increasing when I run query bcz users are uploading docs.
here I want to know why these uploaded blobs are not moving to RBS storage even rbs is enabled for this content db
;what is the reason
adilyes its working for me If I run following commands
$cdb = Get-SPContentDatabase Original_Wss_Content_MSRBS
$rbss = $cdb.RemoteBlobStorageSettings
$rbss.GetProviderNames()
$rbss.Installed()
I don't know what happen , why blobs not going to rbs storage ,
before two months ago I work with other company they installed migration jobs for migrate blobs to nas storage, but they targeted to one content database only
adil -
CS4/Win: markers are not moved after resizing a clip in timeline
Hello,
when I am resizing a clip in the timeline my markers after this clips in the same timeline are not moved, too.
Bug or feature?
If it is a bug: stililfunction(){return A.apply(null,[this].concat($A(arguments)))}
cmeira wrote:
Ok, thanks
But there is a question left: bug or feature? I can't see an advantage of this behavior ... and no solution...
The same behavior in CS5, too?
Neither, is as designed.
CS5 is excactly the same. -
My Ebony magazine and Time magazine are not moved to my News stand
I just installed iOS 5 and it installed perfectly with no hassles. I am just wondering why some of my magazines are not moved to the News Stand.
Time magazine and Ebony are still where they were omly GQ and Readers' Digest moved.
What should I do to move them to the News Stand?Same with the Wall Street Journal. I know it will eventually get into Newzstand, but until then, I'm going to act like a disgruntled user and complain loudly on these boards! Whine!!!!!
-
On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line and then repeats. Even without any traces on the graph, it does the same thing.
I've uninstalled and reinstalled the 6.5 software. Nothing else runs on this machine. It is dedicated to Lookout. I've installed a gauge object, with the same datapoint that the hypertrend is trying to graph, that updates very rapidly with no problem, so doesn't appear to be a network problem.
I'm only tracking one datapoint, at this time, until this issue is solved. Help please?Here is the screen shot.
Definitions for this post:
- "streaming data" = Data coming in over ethernet from datapoint that is being polled.
- "1 scale-second" = 1 second of time based on the scale on the bottom of the graph
Remember that data continues to trace. However, according to the scale at the bottom of the graph, the graph traces 60 seconds of streaming data in @10 scale-seconds, then displays .01 second of streaming data over 50 scale-seconds. The .01 second of data is the long straight lines that you see between the rapid data traces that appear to be 50 scale-seconds.
Even without any datapoints being traced, the graph clicks forward 1 scale-second every 6 real-time seconds. It does this for @10 seconds then clicks forward @50 scale seconds, instantly. Then repeats, as you can see in the graph.
The gauge that is on the same control panel, that you see in the screen shot, is tracking the same data point as the graph. It is polling the data point at real time and never stops updating, so I know that the network is streaming just fine.
513.850.9509 - if I can help clear things up.
Attachments:
LookoutFunkyGraph.jpg 347 KB -
Guest users in WLC are not logged out after pre defined time.
Hi,
My customer wants to create guest users in wireless lan controller. We were successfully able to create that and it worked . But the problem is that to access the internet the users have to change the "proxy server" settings on the internet explorer. As a result the guest users are not logged out automatically after the pre defined amount of time. We enabled " by pass proxy server " settings in internet explorer also, unfortunately it didnt work too.
If we disable the proxy settings in internet explorer customers were logged out, but the problem is that once the customer log in he will change the proxy settings in internet explorer to browse net but wont get disconnect unless and untill he manually change the proxy settings in the internet explorer.
Is there any other way to solve this issue? Can any one provide any alternative solution if possible.
Regards,
BibinCan you explain how your proxy server has anything to do with your wireless access duration?
Does you proxy server have the logic that stops the internet access after a period of time? If so, I assume you turn proxy off in order to web-authenticate? If so, then you just need to tell the browser to not proxy for the virtual IP address of the WLC. You'll never get redirected to the webauth page if you don't send a https request to it (as if, your browser is sending it the IP of your proxy server). -
Entourage 2000 - sent emails are not appearing in "sent items" folder
I am using Entourage 200 with POP account. I have the preference for "save copies of sent messages in the Sent Items folder" clicked since I install it a year ago. But a couple of days ago, all my sent emails have vanished. Even new emails I compose and sent out are not appearing in the "sent items" folder. I did hit "option" when openning the program and everything verify ok. Any help would be greatly appreciate.
Since this is the Mail & Address Book - Tiger discussions/forum for Apple's Mail and Address Book applications, you probably won't get much help here with your question.
What is the size of your Entourage database file? Entourage uses a single large database to store all application data and I believe Entourage X has a 4 GB database size limit.
Does hit the option key when launching Entourage perform the database rebuild function? If not, do a search with Entourage help with "rebuild" for instructions.
This link may be more helpful.
http://www.microsoft.com/mac/support.aspx -
My sent messages are not going in my sent folder... Why not?
When I send a message it should appear in my Sent Folder... They don't... Where are they going? My sent folder doesn't work! How do I fix this?
You do not say whether you are using a standard Pop account using it's own folders Or a Pop mail account using Global Inbox(Local Folders) OR whether this is an IMAP mail account?
So the answer depends on your setup:
'Tools' > 'Account Settings' > 'Copies & Folders' for the mail account.
* Select: 'Place a copy in'
If Pop mail account using own folders:
* Select : 'Sent' folder on and pop mail account
If Pop mail account using Global Inbox(Local Folders):
* Select : 'Sent' folder on and Local Folders.
If IMAP mail account:
* Select : 'Other' and then choose the Sent folder on imap mail account.
* Note: that sometimes the 'Sent' folder on server may be called something similar eg: 'Sent Items'
Click on OK. -
Spam mails are not deleted from the spam folder
In the account settings, I have set the spam mail to be automatically deleted after one day. In spite of that, spam mail in the spam folder is not automatically deleted at any time, even if I restart Thunderbird. In the end, I always have to clean the spam folder manually.
Thanks for your quick answers!
I realized that I didn't select the option 'enable adaptive junk mail controls for this account', but, even selecting it, the junk mails are not automatically cleaned. I tried restarting Thunderbird, restarting the computer, and even manually changing the date and restarting Thunderbird, but nothing worked.
I checked the entries in the advanced configuration, and they are all correct.
My aim, as it was with the other problem I posted, is just to help to improve the development of Thunderbird by pointing the bugs. But they are actually really minor issues and not a real problem for me. So don't worry if the problem is not finally solved.
And thanks again! -
Photos are not deleted from "recently deleted" folder after 30 days
Hello-
I tried to sync my iPhone 6 today, and iTunes read that there were 2500 pictures stored on my device (nearly double what I actually have). I did some searching online and I found that if I change the date of my phone back 1 month (to Feb. 15), all of the photos that were supposed to have been deleted from the "recently deleted" photos folder had reappeared. I manually went back through and deleted the photos that had reappeared in my recently deleted folder from every month since I got my phone (Oct. '14), and then iTunes said I was back down to 1400 pictures.
Why hadn't the pictures deleted after 30 days like they were supposed to? How can I rectify this?
Thanks,
CarsonThanks for your quick answers!
I realized that I didn't select the option 'enable adaptive junk mail controls for this account', but, even selecting it, the junk mails are not automatically cleaned. I tried restarting Thunderbird, restarting the computer, and even manually changing the date and restarting Thunderbird, but nothing worked.
I checked the entries in the advanced configuration, and they are all correct.
My aim, as it was with the other problem I posted, is just to help to improve the development of Thunderbird by pointing the bugs. But they are actually really minor issues and not a real problem for me. So don't worry if the problem is not finally solved.
And thanks again!
Maybe you are looking for
-
I've been backing up the Sybase Inventory Database using 'STARTSER DBBACKUP, as documented in Shaun Pond's Cool Solutions article. This has run as a scheduled task via Remote Manager, has worked faultlessly for ages but has suddenly stopped working.
-
Quick look for text files with non-registered extensions
It seems there was a way in 10.5 and 10.6 to register certain extensions with Quick Look to tell them how to preview a file. I have a lot of plain text files with different extensions that are not initially recognized by Quick Look. How do I hack the
-
Mon macbook pro plante et l'ecran est noir
Bonjour j'ai mon macbook pro qui date de juin 2012 qui a planté ce matin. Je ne peux pas l'eteindre. le curseur ne fait que tourner en boucle sans toutefois. s'arreter. j'ai essayer de l'eteindre avec le bouton prevu a cet effet sur
-
RH8: Where is the Style Mapping Dialog?
ok, I've looked long enough. Where is the Style Mapping dialog?
-
How to compile SubVersioN 1.7.20 without error?
Hi, I'm using development tools that only support SVN 1.7 format (e.g. PHPStorm so SVNKit 1.7) so I need to compile and install SVN 1.7. What I need precisely is the Gnome Keyring support (be able to store and use usernames/passwords that are managed