Drafts go missing in systems

I am currently using Outlook 2013, from time to time I noticed that some of my email drafts disappared from the "Draft" folder. They are neither in the Archieved "Draft" folder. Wonder where I can find them.

Hi,
Please first try searching the missing draft and check if they were accidently moved to another folder. Make sure you selected All Mailboxes when searching. Also check the Deleted Items folder to see if you can find the drafts.
Please also login to your web mail and check if you can see the drafts.
In addition, if you are using an Exchange account, we can also click Folder tab > Recover Deleted Items and check if the drafts have been deleted.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Missing Operating System

I have a Lenovo T500 Thinkpad. I turned off my laptop and now when I turn on the laptop I receive a message that states "Missing operating system". I do not have any recovery disk or install disk. How do I fix this error? The only thing that I have been able to access is via the blue ThinkVantage key. I receive a screen that has a Startup Interrupt Menu with three options. ESC to resume normal startup, F1 to enter the BIOS Setup Utility or F12 to choose a temporary startup device. I see the messages where the drives are partitioned and I should be able to set back to factory standards somehow, but I sure don't know how to even begin. Can anyone help me, as I am clueless.
Thank you

Hi kew659 and welcome to the forum!
Per support page, your T500 came with Win XP pro. Even if you contact lenovo to buy recovery discs, I think they would only sell you Win XP media.
Try following, it will work if you had a good recovery partition of Vista or XP:- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013955
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Z77A-GD65, "Missing Operating System" after running Live Update

So here's the brand new computer I assembled:
$309.99 HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16
$219.99 Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Processor Intel HD Graphics 4000
$199.99 Acer G276HLDbd Black 27" 6ms (GTG) Widescreen LED Monitor
$179.99 Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$159.99 AZZA Hurricane 2000 CSAZ-2000 Black SECC Japanese Steel ATX Full Tower Case
$154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
$154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
$144.99 MSI Z77A-GD65 LGA 1155 Intel Z77 Motherboard with UEFI BIOS
$119.99 OCZ ZT Series 750W Fully-Modular 80PLUS Bronze Power Supply
$99.99 Kingston HyperX Beast 16GB (4 x 4GB) 240-Pin DDR3 2400 (PC3 19200) RAM
$99.99 Logitech G930 USB Connector Circumaural Wireless Gaming Headset
$99.99 Microsoft Windows 7 Home Premium SP1 64-bit - OEM
$74.99 ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
$59.40 CNPS9900MAXR Red CPU Cooler
$49.95 3YR DATA RECOVERY SERVICE I INT. HD For (WD Black 2TB)
$34.99 2 yr Replacement W/ ADH plan For (Acer 27" LCD)
$10.99 LITE-ON SK-2030/B Black PS/2 Wired Slim Keyboard
$9.99 LITE-ON SK-2035/B Black USB Wired Slim Keyboard
I wanted to have the SSDs in RAID0 with Win7 and the games on it, then a volume on the 2TB that the RAID backs up to, with the remaining 1.5TB just free storage space in another volume. I couldn't get raid past Win7's Where Do You Want To Install screen during installation, so I ended up installing the OS on just one SSD. I figured I'd backup the functioning OS to the 2TB then rebuild the RAID array and copy the OS back onto it.
The system had been up an running for a full day, being updated left and right nonstop, several big games put in, etc etc, everything was running fine until I decided to run MSI Live Update and started pumping in updates. Constant errors as I went along, but generally it'd just skip to the next installation attempt. When it got down to updating the BIOS and did it's DOS injection thing, it for forcefully shut down the PC, restarted, did Post, flashed the BIOS wallpaper, restarted again, Posted, no BIOS wallpaper, just endless "Missing Operating System". Walked away, went to bed, back up and at it for a few minutes (Will be back tonight for however long it takes to get it fixed). I switched the BIOS switch over, no dice. Feels like it's a BIOS "OS" that's gone, and that a BIOS reset/flash is in order or something, but I've never done these things.
Thanks in advance for any rendered assistance that leads to resolution.

The SSDs are definitely hooked up where they're supposed to go; the motherboard had a little sticker n' everything for where the two SSD dedicated SATA 6.0gbps ports were :P AND my case has 2 specific slots for SSDs which don't use the hotswap electronics PCB passthrough like the other 4 bays, which is where the 2T is installed. I was going to take the 2TB out and hook it up normally and see if that changed the speeds, but I'm leaning towards wishful thinking. Did I mention I went and made several volumes with different file cluster sizes to test and see if that was the issue? Alas, all were borked. It still confuses me though because every once n' awhile it'd do massive burst speeds the way it's supposed to.
As far as I can recall I'm using up to date BIOS, the last one or two. One BIOS switch is set for the last BIOS, the other switch is a step back devoid of the Windows 8 stuff. I believe I have all the drivers up to date as well. Intel 335's are literally brand new, mine hadn't been more than 3 weeks old off the production line when I received them; IE, they should pretty much have the latest firmware on them which spares me the risk of destroying something precious
I MIGHT have a SATA external enclosure around here somewhere, if so, the 2TB could go in that for additional testing until I figure out where it's sustaining speeds of 2-10MB vs 100-150MB/second.
Meanwhile, the good news is that the system has been fully operational and hella stable. I hadn't slept in almost 3 days, playing and installing stuff nonstop. The system continues to run cooler (32c@stock CPU speed) as the thermal paste sets in, the knocking sound of the fan in the PSU has gone away upon me reawakening a bit ago, and amazingly, this massive system (with EIGHT fans) draws only 60-65 watts while desktopping. That's just astounding

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

Hello
I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
I made an image of it , then deleted win partition from utility disk , ( wrong idea )
I didn’t notice that boot camp could erase win partition , anyway I have tried several times , and always after reboot boot camp
I get the same
Missing operating system .
If I boot from dvd install win or if i boot from the boot win partition.
hd and partitions looks OK to utility disk
Any idea to fix the problem ?

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Missing Operating System Error

Hello, my aunt asked me to fix her computer but I fix game systems. She had it for a few years, Toshiba Satellite L305D-S5892(model # PSLC0U-02501F).When I turned it on, it said press F2 for Setup Utility and F12 for Boot Manager.After everything, it says " Missing Operating System".I tried everything on setup and boot manager, took hard drive out and put back in, took memory put and put back in , took big battery and put it back.Please Help!!!!!!!

Can you get it into the bios setup screen. If so is the hard drive listed. It sounds to me like a hard drive failure. If you replace the hard drive you will also probably have to buy a set of recovery disks unless your aunt made a set.
L875D-S7232 (Win 8.1)

When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP. Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones. WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference. Any ideas and suggestions would be welcome Thanks Pia Pehtla

A forum search for "missing required fonts" brings up this thread which should solve your problem:
http://www.adobeforums.com/webx?128@@.3bbdb0a7
Peter

I cloud missing from System preferences.

Hi,
I am running 10.8.4, I cloud is missing from system preferences.I tried some stuff suggested on website nothing worked out so far. Any suggestion?
Ari

Is iCloud the only thing missing from System Preferences?
If, while in System Preferences, you click View -> Customize does it show up then?

Missing file system after installing in SSD

Missing file system after installing in SSD MacBook
Hi All
I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
When i reboot the machine with the new disk I get the image of a folder with question mark.
If i reboot the machine again and hold the alt key at the chime I can see two disks.
One called SSD and another called Recovery.
if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
it tells me that everything is fine.
Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

Hi i tried this and just got the big symbol of doom at start up.
However, a little terminal witchcraft did the trick!
sudo bless -mount /Volumes/"Macintosh HD" -setBoot

Error message : Info Idoc missing ;database system

I am trying to load the data from database system oracle ,the data was successfully loaded into psa , but cant able to load the data into ods from psa .
Data in psa is all green without any errors , as info idocs are missing its not letting to load data manually from psa to ods ,
I try to reload but coming up with same error
Next day problem was fixed automatically, I want to know what is the exact reason for this problem and how can next day it fixed automatically

Error message : Info Idoc missing ;database system
I need the solution urgently, please help

Error: Prefix number: entry missing for system REP client 113 Msg no 5W023

Hi, we're trying to study Workflow based on the manuals we downloaded online. Upon saving, we encountered the error: Error: Prefix number: entry missing for system REP client 113 Msg no 5W023.
Here's the diagnosis:
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System Response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Procedure
Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
Hope somebody can help me understand what this is.. thanks so much and appreciate your help..
Thanks,
Angela Paula

Hi Angela,
Please check if the Prefix number is maintained in SWU3 t-code.
Go to Maintain Definition Environment -> Maintain Prefix Numbers and check if the prefix number is maintained.
Hope this helps!
Regards,
Saumya

"Missing operating system" help!

Hey all,
My Mini's hard drive died the other day, so I installed a new one. I have the OSX dvd in my drive, and when I go to boot up, I get an error message "Missing operating system."
If I try to boot from CD by holding down the C button on my keyboard, nothing happens -- same error message. It appears my USB keyboard isn't powered.
Any ideas?

The Apple Aluminum keyboard doesn't work with the startup keys on the mini.
You can use your Apple remote instead: as soon as you hear the startup chime or beep, hold down the menu button on the remote. It will put disc icon up on the screen that you can select with your mouse.
Keep in mind that you need to use the install disc that shipped with your model of Mini -- or else a full retail version.

[solved: PEBKAC] syslinux woes: "Missing operating system"

In light of http://mailman.archlinux.org/pipermail/ … 23211.html I decided to try syslinux, but couldn't get it to work. I think I followed the wiki (i.e. the /boot partition is marked active etc.) but still got "Missing operating system" error and had to use a liveCD.
If anyone is using syslinux for their bootloader, can you pleas post the configs or give me a hint what could have gone wrong?
Last edited by karol (2012-07-13 22:25:03)

I use syslinux (or more precisely the extlinux that boot from an ext{2,3,4} partition) successfully. Hereafter I briefly post what have to be done. If it still does not work. Repost posting exactly what you have tried.
1) create a directoty /boot/syslinux, containing syslinux.cfg and possibly modules that you will refer in this file (notably menu.c32 and chain.c32). You can put symlinks on the condition that the symlinks point to file in the same partition.
small edit: pay attention of 2) if you use symlinks. the / of the pointed file is the root of the partition where syslinux it. It does not correspond to the way you see it in the system if this partition is not mounted in /. See 2).
2) Place syslinux.cfg in this directoty. The root of the file mentionned are relative to the root of the partition containing the /boot/syslinux directory. You can also use relative paths that are relative to the directory /boot/syslinux (so if you have a /boot partition, the linux kernel will be referenced as /vmlinuz-linux, if /boot is on the same partition as / then /boot/vmlinuz-linux). I put here my config as an example: http://pastebin.com/zNunwupx
3) Make the partition containing /boot/syslinux bootable.
4) Put an mbr on the hard disk to be booted:
dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda bs=440 count=1
Replace /dev/sda by your hard disk. If you use gpt partition, you may have to use /usr/lib/syslinux/gptmbr.bin
5) run
extlinux /boot/syslinux
Last edited by olive (2012-07-11 19:18:42)

[SOLVED] Mac OS X/Arch dual boot Missing Operating System GRUB problem

I am attempting to dual boot Mac OS X.5 and Arch on my "unibody" macbook pro.
I am getting the "Missing Operating System" error over and over. I have followed the Macbook install guide in the wiki and the Beginners install guide. I've also read all the threads I could find on the subject. The common fix seems to be changing the root path on the grub menu.lst... I've tried that. twice. with no luck.
I have EFI on sda1, Mac OS X on sda2 and Arch root on sda3.
My menu.lst is pretty much standard with
root (hd0,2)
kernel /boot/vmlinuz26 root=/dev/sda3 ro
for both Arch and the Arcch fallback.
I'm not sure what else to try. I can give more information, but I'm not sure what else to give.
Thanks in advance .
Last edited by Weird Fishes (2009-06-14 15:34:31)

I know exactly what the problem is.
If you're using rEFIt, sync your partition tables (should be the menu item called 'Partitioning Tool'). The problem is that GRUB has been installed, but doesn't know where to find the Arch partition.
After syncing, you may find that the boot process hangs at the Linux logo on a gray background. No worries — just reboot and the problem should fix itself.
N.B. You will need to do a partition table sync every time you change your hard drive's layout.

Drafts go missing in systems

Similar Messages

Maybe you are looking for