Drag and Drop audio effect hits all tracks

How is it that when I drag and drop a tried and true compressor effect onto an audio clip (FCP6), it now takes to all audio tracks from the same clip. Then I have to go back and remove the effect from the other (3) tracks. Bug, or setting I'm missing?
Forrest

Final Update: ...god willing...
OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
Wish me a lot of luck in the future.. I'm sure i'll need it!

Similar Messages

IWeb Podcast - Drag and Drop Audio and Picture Files

I have been using iWeb the last few days to create a web site that includes some podcasts. I currently have three podcasts as a part of the site. I have been able to get two of the podcasts to work correctly but the third one, no matter how many times I recreate it seems to be where the difficulty lies.
The podcast page gives me the opportunity to drag and drop an audio file and a picture file onto the page. As best I can tell, when I drop the audio file onto the page, things seem to be fine. When I drop the picture file onto the object, the audio clip seems to disappear. I have tried dropping the picture file first with basically the same results.
A couple of more things. I created the original podcast file in GB3. I have found I can't import the podcasting file directly form GB because I end up with a very large file (>60GB) for the audio portion. So, I share the audio file to disk as an M4a file. When I add the audio to the podcast page in iWeb, I drag the audio file from Finder onto the object. The picture I have dropped onto the podcast page both from the Media Browser and from Finder. The results are the same.
Any help is appreciated.
Dave

I think you're asking the question in the wrong forum. From what you posted, there's nothing wrong with GB, you should post in the iWeb forum where you're more likely to get useful and accurate answers about, well, iWeb.

Drag and Drop without effect

Hello,
I have created a drag and drop following the examples
provided by the documentation, and i didn't find any example
without the zoom out effect during the drop.
So now I have my drag and drop operation using the drag and
drop manager and I would remove this effect during the drop.
Anyone can help me ?

Hello,
I have created a drag and drop following the examples
provided by the documentation, and i didn't find any example
without the zoom out effect during the drop.
So now I have my drag and drop operation using the drag and
drop manager and I would remove this effect during the drop.
Anyone can help me ?

Drag and Drop same effects in AIR ?

I would like to have the same effects in AIR for the sample in below link:
http://saturnboy.com/2010/12/drag-and-drop-revisited/
Any workaround ?

I found, use <s:WindowedApplication useNativeDragManager="false"/>

Drag and Drop - Audio Levels

Hi There,
I am using the Drag and Drop feature. I chose to use the Adobe provided audio files for correct and incorrect answers. The only thing is that they are a bit loud. I would like to adjust the levels. Is the only way to do this is to go into the Gallery folder and make the adjustments to the files themselves or is there a way to do that through the Captivate app?
Thanks in advance,
Julie

In order to make any changes to the volume levels of these files from within Captivate you would need to have imported them first into the Library. Once you have those files there you can open them in the Slide Audio editor dialog and change the volume.
I would suggest that you make copies of these audio files, rename them (so that they do not get mixed up with the originals), and then place them somewhere in a separate folder where you can add them to any future projects that you deem would require audio files with this lowered volume level.

Cant drag and drop audio files from my pc

Recently had a missing dll issue which forced me to remove and re-install itunes and now I can't drag and drop from my PC.

Type of file

Drag And Drop Not Working At All

I've been banging my head on this one for a few hours now. If
I go
here
and download the example air app and install it, it works perfectly
fine. However when I create my own air application in and
copy/paste the code and try to debug or run it through flex it
doesn't allow me to drag an image onto it. Is there something
special in Flex Builder that you have to do to get this to
work?

Ok, If I publish a release build of my air app then the
functionality works.
Is it not an option to have drag and drop from the desktop
when debugging the application in Flex Builder? Seems kind of dumb
that this would not be allowed.

Updated Captivate today - now it doesn't accept drag and drop audio

Updated Captivate today - now it doesn't accept drag and drop audio

Hi There,
Can you tell me the exact version of Captivate (Go to Help >About Adobe Captivate ) ?
How did you updated your captivate?
Which operating system you are using ? Is it Windows or Mac !
Can You please elaborate the issue you are facing ?
Thanks and Regards
Himanshu Satija

My Captivate 7 Drag and Drop interaction is hit or miss . . .

The interaction is with mutiple targets, each with multiple correct drag sources, some drag sources can be used in more than one drop target. In the background of each target, I have deselected "accept all" and then had selected only the acceptable answers. The idea is that they drag sources until they have placed each one in a bucket (incorrect answers bouncing back, and then the user retrying with another target) until all the sources are gone and only the buckets remain on the screen.
It's crazy, the first couple seem to go okay, and after that, everything bounces back no matter whether it's correct or not. Please help before I go crazy!
As well, is it possible to post the captivate file to this blog so you can see what I've done?
Thanks in advance for any help that someone can offer!

Hi there,
You need to click on the 'Submit' button to execute the sucess action in case if 'Auto Submit' is disabled.
Thanks,
Nimmy Sukumaran.

Unable to drag and drop itunes tracks intp idvd project

hello
After selecting media I am unable to drag and drop most of my itunes tracks into my dvd projects ,this is true for both imported cd's and purchased music
Only a few tracks will show with the + sign
any thoughts
Thanks
Paul T

Give this basic remedy a try. Quit iDVD and delete your iDVD preferences. To do this, go to your username> library> preferences> com.apple.idvd.plist. Delete this file. Then reopen iDVD; it will create a new preference file with all of the default settings.
If that doesn't work, do a verify and repair of permissions using Disk Utility.
I hope this helps.

Page Item Drag and Drop reset all items Displayed Field attribute

If I use the Drag and Drop feature it resets all items Displayed/Field attribute to yes. Is this just the way it is and it is to bad so sad for Nicholas or is there something I can do to be able to use drag and drop and still retain my setting for the Item's Displayed/Field attribute.
Any assitance is much appreciated

Probably the easiest way would be to have 2 arrays that hold
the data being sent to box A. Just add/or subtract from one that
you don't care if it changes, and leave the other one alone. When
you want to reset, just clear Array 2 and populate it again from
Array 1. For Box B, just reset the contents of the array to nothing
- myArrayB = new Array({item1:'',item2:''})

Can't drag and drop .m4a audio

I cannot drag and drop audio even though I've converted it to .m4a.
Does anyone have a solution?

Do you subscribe to MLB.tv, and if so, did you install the NextDef plug in? If so, read this…
https://discussions.apple.com/message/19185556#19185556
I removed the NextDef plug in over 24 hours ago, restarted and haven't had a single issue with drag and drop or cut and paste since.

Drag and drop onto a cd loses quality

I shoot in RAW and the file sizes are large and I can manipulate the e-mails BUT
I noitced that when I drag and dropped RAW photos on to a CD to burn the jPeg qulaity dropped.
For instance a 14.5mb drops to 537kb..
I would guess I need to change something and would like help with the issue.
Thnak you,
Greg

Hi Greg -- I really wish I could retract my post. It doesn't read at all the way I thought it did. Please accept my apology. What I was trying to say is that as a means of exporting, drag-and-drop is effectively crippled in Aperture.
Aperture's complexity makes dragging-and-dropping Images to create and export files unworkable without additional input. The designers made, imho, a good decision in making drag-and-drop of Images from Aperture to another program equal to exporting the Previews of the dragged Images.
Again, my apologies -- and my thanks for your soft handling of my rudeness.
Cheers,
--Kirby.

Illustrator Default PDF, if open in Acro Pro, drag and drop other .ai files, will they also....

Hi! I'm trying to archive (for myself and others for easy access) about 50 fairly complex .ai files in a single Illustrator Default PDF and maintain editability and preserve layer and grouping integrity for every separate file, and, i'm probably going to have to do this hundreds of times (at least!) in the future. Once i save the initial first pdf file through Illustrator (wish didn't even have to do this, but seems no way to do in Bridge), then open the resulting pdf w Acrobat Pro, can i then just select an entire folder's worth of ai files in Bridge, drag and drop them into the pages panel and still have the dragged and dropped files also preserve all their AI info and layer/ group integrity? An if not, thinking if not based on 20 similar experiments, what's a fast way to do this. Doing this manually each time: opening each file in AI then saving as AI pdf, then combining and arranging them all after the fact, would be, well, fairly effed in terms of time, carpal tunnel, arthritis etc. Experimented w Bridge PDF Output batching (terrible rasterized lo-res results, but great for its intended purpose) and just dragging and dropping into Acrobat (lose complicated layer names and info, all flattened to single layer). Any help most appreciated, and as i do not have regular access to das interwebs (i live on a boat) would appreciate and heed gentle admonishment if i've misposted or broached any community etiquette here. I've researched this as well as i can but can't find anything efficient/ elegant not involving InDesign, and even then the details are skimpy. Thank You! Getting mentally exhausted and not a little loopy. Keep in mind had to teach myself both Illustrator, Acrobat etc with access to the very limited offline help menus (the boat), so a complex answer involving learning InDesign would be learning curve can't even imagine with everything else struggling to do. But if you're willing to babystep diagram it out for me or can find me a link that does i will not only be eternally grateful but will do my durndest to master it and pass it on....Thanks Again! lil mc szpf
PS If it helps I'm running the diligent dogged dusty beloved workhorse CS4 Design Premium on 27" monitor 2010 Mac (OS X 10.6.8), and took advantage of rare housesitting net access to install all most recent updates of everything, i'm barely competent w AI, PS, BR and been tackling Acrobat for past couple of months now....

im glad that somebody is atleast trying. perhaps i need to be more clear.
i will step by step describe the issue in detail.
1) i open an email that contains an attachment .dxf or .pdf
2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
4) i highlight the downloads arrow on the right top side of my browser and click it
5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
its really as if the drag and drop feature just dosent work IN FIREFOX.
i can drag and drop files all day long everyplace else.

Drag and drop option not active - Captivate 8

Is there a particular slide you need to use or something else you need to have on your slide in order to activate the drag and drop menu item? All other menu items in the Interaction menu are active, but drag and drop.

Drag and drop is not available for Responsive projects.
Sreekanth

Drag and Drop audio effect hits all tracks

Similar Messages

Maybe you are looking for