Drag and Drop Contact for GW

When I drag and drop a contact from the GroupWise Sddress book into the
Contacts List in NM, I get the following error :
"Novell Messenger does not regognize the User Id you entered"
I am able to search and add users though.
Steve

Steve,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • Drag and drop Contact from Address Book to Pages Document on iPad

    On OS X MacBook and iMac I can use Drag and drop Contact functionality from Address Book directly on a Pages document. In Pages I have setup Merge fields to merge values from my Contacts. This works great!
    I would also like to use this in Pages on my iPad mini. I know Pages on iOS are different from Pages for OS X, but I wonder if there is any possibility for me to open OS X created Pages document with Merge fields on iPad's Pages and replace existing Contacts values with new one from Address Book?
    It seems like Pages on iOS even don't recognise Merge fields that I have created on OS X at all.

    Are you dragging directly from one application and dropping into the other? What happens if you export to vcf card then import the vcf card with the other application?

  • Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

    Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

    If you haven't come across the workarounds thread you may find helpful tips there on this and other ways to work with Numbers 3.
    ronniefromcalifornia discovered how to bring contacts into Numbers 3. As described in this post:
    "Open Contacts
    Select all the cards you want
    Copy
    In Numbers, in a table, select cell A1
    Paste
    Boom. Works great. Even brought in the pictures. Cool."
    So instead of drag and drop, just select in Contacts, copy, and paste into Numbers
    SG

  • How to disable drag and drop feature for a document library?

    Hi
    How can I disable drag and drop feature for a document library? Do I have an option to disable it from the SharePoint's feature set?
    Or can I disable it using a script? If so, how?
    Regards
    Paru

    Hi,
    According to your post, my understanding is that you want to disable drag and drop feature for a document library.
    Drag and drop in SharePoint 2013 is a feature that depends on HTML5, which requires version of browser, SharePoint by default doesn’t has feature to disable or enable this.
    You can try disabling the drag and drop feature by disabling an add-on in Internet Explorer, or
    using Internet Explorer 9 or lower.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/office/en-US/8961ff07-039d-47b0-ae7d-8e24af96234a/2013-doc-library-settings-turn-off-drag-and-drop-and-findsearchfilter-on-metadata-columns?forum=sharepointcustomization
    http://community.office365.com/en-us/f/154/t/228079.aspx
    More information:
    The Solution to SharePoint 2013 Drop and Drag Not Working
    SharePoint 2013 Drag and Drop Upload Not Working
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Can you drag and drop contacts into Pages template?

    Older versions of Pages allowed you to drag and drop contact information to a document or template, Can this still be done in newer versions? If so, how?

    No.
    Someone has created an AppleScript to merge your addresses however.
    Why not just use Pages '09?
    Peter

  • UIX drag and drop editor for OAF?

    I posted the following question on the OAF forum, was told it might make more sense to do in the JDeveloper forum:
    I've been told there is a "drag and drop" editor for UIX which can be used with OAF. Is that correct? I am using the following with EBS 11.5.10:
    OA Framework Version 11.5.10.4RUP.
    MDS Version 9.0.5.4.89 (build 555)
    UIX Version 2.2.24
    BC4J Version 9.0.3.13.93
    If there is such an editor, where can I get it, and how do I install it?

    Shay, thanks for the response.
    I have not written any ADF code outside of the course I took a few months ago, but I'm aware of how powerful it is. My question has to do with using the same toolkit or something similar to create and/or modify OAF pages. My customer is using EBS 11.5.10, and as such is using JDeveloper 9.0.3.5. If I can show how to use ADF with EBS, even if it is in R12, I might be able to convince the customer to use ADF. However, any application we develop must work along with the rest of the EBS, so that means we must use the same security mechanism (responsibilities, menus, etc.).
    Currently, to my knowledge at least, there is nothing as simple as your demo which can be done with OAF. There is no drag and drop capability, unless I've missed something.
    Any comments?

  • I am using Mail with OS 10.9.1...I used to be able to drag and drop contact addresses from my address book to an e-mail header.  Now I have to type all the names and can't drag and drop.  Is there a setting for this?  Thanks!

    I am using Mail with OS 10.9.1.  I used to be able drag and drop names from my address book into the address header, but can no longer do that.  I now have to type each name in.  Does anyone know if there is a setting for this or is it a feature of the updated software?  Thanks for any info!

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • Multi-row "Drag and Drop" works for some users, not others

          Background: We are working on Win7 SP1 clients, Project Prof. 2010, SP2
          A couple of users have reported that they cannot move ("drag") multiple selected rows in a task sheet, only a single row at a time. Other MS Project users around them (and myself) can move multiple rows with the "Drag"
    feature. "Drag and Drop" is selected in the "Options/Advanced" section of both their local global template and the Enterprise Global.
         To my knowledge, the multiple row selections contain no collapsed summary tasks, in case that might be an issue.
         I'm suspecting some Windows setting is amiss on the offending clients, but wanted to see if anyone else had seen this behavior before in Project Prof. 2010.
         Thanks!
    JTC
    JAckson T. Cole, PMP, MCITP

        Thanks for the response, Shiva!
        User community is on MS Project 2010 (14.0.7011.1000) SP2, MSO (14.0.7128.1000)
        To reproduce the problem, MS Project user will select multiple task rows by selecting first row, then holding MB1, and "sliding" to the last row desired. The problem manifests itself by NOT turning the cursor into the "four-arrow cross"
    after selection is accomplished. If only one row is selected, the ability to move that row alone is available.
         Again, only a couple of users (that have called me!) are seeing it. Their officemates are not having an issue.
         FYI ...
    JTC
    JAckson T. Cole, PMP, MCITP

  • Desktop drag and drop icon for my "other" computer

    i really need an icon for my MacBookPro desktop to reside on my Mac Pro desktop (and vice versa) so that I can just drag and drop copy (or move) data from one volume to another. sort of like what I have with my dropbox icon in the sense that I can just keep this on my desktop and in the View Pane of Finder and drag and drop items or open the volume etc.
    is this possible and i am just not getting it to work because i don't have things set to mount automatically or is there a restriction that does not allow this that I don't understand?
    i am on snow leopard and the connection is via wi, but I could plug in via ethernet when i know i will need to do this sort of moving of data a lot.
    thanks for clearing any of this up for me.
    - jon

    if as3, create a sprite or movieclip and use:
    image1.addEventListener(MouseEvent.MOUSE_DOWN,downF);
    image1.addEventListener(MouseEvent.MOUSE_UP,upF);
    function downF(e:MouseEvent):void{
    Sprite(e.currentTarget).startDrag();
    function upF(e:MouseEvent):void{
    Sprite(e.currentTarget).stopDrag();

  • Drag and drop samples for instant load and playback. MIDI SAMPLE PLAYBACK

    HI, i am looking for a application where I can drag samples in it for instant midi playback.
    I know logic has a way to do this through the ESX24, but the problem is there are multiple steps and it can takes around 1-3 minutes to finished the task.
    I am looking for something on a more "spend less time setting up" event. Basically an application where I can manual drag and drop for quick load. I would like to use the Roland Hand-sonic as my midi play back

    sonther, I've only tried the audiofinder out a little bit running in demo mode. I liked it ok, except that I thought I'd go and let it index my audio files, which took a very long time (fair enough, I have many).. but I didn't really see any great advantage from having done so. also I found that for some files it would give me a waveform overview, others it would say preview not available or something, even though they were the same format. maybe that was a demo limitation thing.
    but it did get me thinking about how much I'd like to work better with my audio in the finder.. I've hated the audio import and audio window management in logic for a while so I'm always looking for better ways to do things.
    ...then, I saw this:
    http://www.audioease.com/Pages/Soundabout/SoundaboutMain.html
    now, I just checked and the website is currently updating this page. but go back later until you see it back up. there was a QT demo video (complete with that generic dutch-english accent..), showing what looks to me like exactly the enhancements I've been looking for, to work much better with audio in the mac finder. and of course it's got a few things that I didn't even know I was looking for, but now I know.
    I'm hoping it gets released soon.. and I'm also hoping that it's not going to mess around with leopard when that comes out, because I have a feeling I am going to get very used to using this thing.
    even for things outside logic, like quickly rounding up my work in progress files to instantly convert to mp3 and AAC right there in the finder, and then automatically have it all placed in an email ready to go, it's going to make life a whole lot easier. especially when you've been working hard on a deadline project, the last thing you feel like doing is messing around keeping your work in progress files in order, prepping mp3s or whatever and emailing, after you've finished a long day at logic.. seriously, check out the video when it's back up..
    et dis-moi sonther, ça se fait comment que tu parles français? t es pô un ptit québecois par hasard?....

  • Drag and drop option for hierarchy through Web Template

    Hi All,
    I have 2 hierarchies in one report. For example Product Hierarchy and Customer hierarchy. I would like to have an option in query where I can select the node from each hierarchy and the report is displayed only for the selected node/nodes. I am using Web Template. I used "Hierarchy filter" web item and was able to achieve this. But I would like to have a drag and drop option.
    I mean when I use Hierarchy filter web item, I have to select the particular node in the hierarchy. and then the report (Web Item - Table) is displayed based on the selection. But I would like to drag the node from the hierarchy and drop it to the report (Web Item - Table) and the report is displayed for the selected hierarchy node.
    Is this possible? How? Do I have to write any Java code or we can achieve this with BI Standard functionality.
    Regards.
    Parin Gandhi.

    This is not possible using Standard BI web functionality.
    If you are an expert with JavaScript and BI Web APIs you can probably write JS code to do this.

  • Drag and Drop functionality for SVG charts.

    Has anyone been able to get a drag and drop functionality with charts?
    I've read where Vikas was able to accomplish this with reports, but, unfortunately, it was an old post and his example is no longer available.
    I understand that this is more on the browser/presentation layer rather than the back-end, but, judging from the replies from the mainstays in this forum along similar lines, I'm hoping someone may have accomplished this already.
    I'm trying to get this to work for a "dashboard" type application I'm trying to prove out using HTMLDB.
    Your responses are appreciated.
    Thanks

    Hello,
    I've done drag and drop using the Adobe SVG Viewer before in a whiteboard application built on top of ... you guessed it... Apex. Unfortunately I do not have an example I can share with you but I know it can be done because I did it, trust me ;) . I am planning on building out that application as an application anybody can download and use but unfortually it will be bit.
    Your best bet at the moment is looking on google http://www.google.com/search?q=svg+drag+and+drop there are quite a few examples.
    Oh also look at this file in the images directory /images/javascript/svg_js_includes/svg_common/oracle.svgNodes.js it has quite a few helper functions and that file is included in every chart by default so there are functions you can use, (no drag and drop unfortunalty)
    If you have can lock down the users in your environment to use only Firefox or Safari you can look at canvas as well it's pretty handy and can do alot of the same stuff
    http://developer.mozilla.org/en/docs/Drawing_Graphics_with_Canvas
    and of course some simple examples in Apex
    http://apex.oracle.com/pls/otn/f?p=11933:78 (it runs on keypress in the textarea I use it to mess with Canvas constructs)
    Carl
    Message was edited by:
    Carl Backstrom

  • Drag and drop interaction for a different use

    Hi,
    Can anyone please help me get the a solution to the below:  For the drag and drop interaction my user should be able to drop the answer (irrespective of that being a wrong answer) to any of the options, but as they click Submit, the actual answers should show up.
    I am using Captivate 7.
    Thanks,
    Roja

    Thanks so much Sreekanth!
    One thing that I am still struggling with is, the source (the questions) do not sit on the wrong destinations (non-answers), the moment it dragged to the wrong answer, the source goes back to its original place .
    Thanks,
    Roja

  • Drag and drop files for burn to DVD takes FOREVER

    When I drag and drop files onto the blank DVD icon, the ghosts of said files just hang there for the longest time, and I get a spinny beach ball. Many, many minutes later things finally return to normal and I can proceed with burning the DVD. It's just copying some aliases, right? It didn't used to take more than a couple of seconds before I upgarded to Mavericks. So what the **** is taking so long now?
    PBP 2.66 Core 2 Duo, running 10.9.1, burning to a Samsung Portable DVD Writer Model SE-218

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • Adobe Captivate Help | Drag-and-drop interaction (for subscription and Adobe Software Assurance customers only)

    This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/drag-and-drop-interaction.html

    Yep.  But it will only likely get to you in the next version released for NON subscription or ASA customers.  With 6.1 Adobe was giving a preview of the functionality they would be including in your next release.  Either way, whether you upgraded to the subscription edition or waited for the next paid upgrade, you were always going to be paying something to get this new functionality.  6.1 users just got it earlier than everyone else.  That was Adobe's decision.  It certainly hasn't been a popular one.

Maybe you are looking for