Drag and drop in mail stopped working

where is the menu command to reactivate it?
the "move" command still works.

Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

Similar Messages

  • Why has drag and drop in mail stopped working

    Drag and drop has only stopped working in Mail, it is still functioning in other programs.

    Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
    The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

  • Drag and Drop Feature is not working

    I have a mid 2012 MacBook Pro running 10.8.3 and all of a sudden the drag-and-drop feature isn't working. I was dragging photos from my job's website and adding them to a folder, but after about three photos in, it stopped working and no matter what I do it won't drop into the folder. How can I solve this?
    Thanks

    Can you drag anything into the folder, such as files from another folder?

  • Drag and Drop e-mails to a SharePoint Online Folder

    Summary
    E-mail to a list is not available in SharePoint Online (yet) and it is difficult to move e-mails from Outlook to a SharePoint list for collaboration, storage and search.  The following steps will put a file on the users desktop that will open a SharePoint list and then you can drag and drop e-mails into the proper folder. 
    Step 1
    Create a drag and drop folder location for SharePoint Online e-mails
    1.       Go to your SharePoint Online shared documents location
    2.       Create the folder structure that you want for your e-mail storage
    3.       Click on your top folder
    4.       Click on Actions
    5.       Open with Windows Explorer
    6.       In the address bar at the top of the Explorer Window copy the address
    Step 2
    Go to Start, Computer
    1.       Click on Map Network Drive
    2.       Paste the address copied above into the Folder box
    3.       Check Reconnect at logon
    4.       Take note of the drive letter given or choose a drive letter
    *note these instructions are for Windows 7 – you can search help for Map Network Drive for the OS you are using
    Step 3
    Open Notepad
    1.       Type in the following:
    “explorer z:”  (leave out the quotation marks and enter the drive letter in step 2
    2.       Click File
    3.       Click Save As
    4.       File name OpenEmail.bat
    ·         Note the file name does not matter but the .bat has to be there
    ·         Save to the Desktop
    When a user wants to open the SharePoint location that stores e-mail they double click on OpenEmail.bat and it will open in an Explorer view which will allow for e-mails to drag and drop from Outlook into the folder.
    David Allred

    For drag and drop of emails from Outlook to SharePoint we are using a third party
    SharePoint Outlook Integration tool called PageLight. PageLight also offers
    Save Outlook emails to SharePoint functionality

  • Drag and drop feature is not working in Maverick?

    what can i do when the Drag and Drop feature is not working in my I Mac Using Maverick 10.9.4, it will not do it at all i must do copy and paste.
    reading from earlier forums this has been a problem in earlier versions for the mac.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Drag and drop feature won't work when loading to ipod from computer

    My ipod has been a source of joy for 1 1/2 years. Suddenly, my drag and drop feature has stopped me cold. I can't load my audiobooks from the itunes library to my ipod. Any ideas??

    Is the iPod still set up for MANUAL updating?
    Cheers,
    Patrick

  • How to to drag and drop apple mail into a browser or a webpage?

    I want to drag and drop a mail from mailbox to a webpage for uploading.
    is it possible to do that?

    In the edit page mode, click the pencil of the region were your portlets are. A region is a box with a dotted line. In the first tab you have the ability to select "Allow action". Default this is set to "all". When you set it to "none", your portlets can not be drag & dropped.

  • Now that I have home share my drag and drop feature doesn't work to create playlists

    Now with Home Share there are two subsets of playlists.  One is on the hard drive of the acutual computer where the iTunes originated.  Once I am at a Home Share computer I cannot use the playlist feature.  I can CREATE a playlist and name it, but the drag and drop feature does not work for songs which are not directly located on this hard drive.  I can, for some reason, attach an iPod and make a list over on that, but that is all. 

    Because IE is running in a different user context. You cannot drag and drop anything from Explorer into a different user context. This isn't a "SharePoint" issue, as it relates to any application run as a different user.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Drag and drop in mail

    i cant drag and drop mail into folders, the same thing happens in iphoto,
    help

    Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
    The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

  • My drag and drop feature is not working

    How do I enable my drag and drop feature when it has stopped working?

    When you say it is frozen and not working... what exactly is happening when you try to drag a song to your Shuffle?
    CG

  • The drag and drop feature is not working on the touchpad

    My drag and drop stopped working on my macbook pro, the model number is the
    MB 13.3/2.4/2X1GB/250/SD/BL-KB-USA
    MB467LL/A
    The systems is runnng Snow Leapard, I have in the preferences, drag lock disabled, dragging enabled, the operating system is 10.6.8.
    I also reloaded the system disk, same issue.
    Any help would be appreciated.
    Thanks,
    Tom

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How do I enable text drag and drop in Mail?

    Simple enough question. I'm sure I had this at one time in my Mail app, but it doesn't work now, and I see nothing in Preferences to enable it. Can anyone tell me what I'm missing?
    Rob

    Just found the problem. The old Kensington Turbo Mouse I was using won't work with drag and drop. It doesn't work even when I dedicate one of the four buttons specifically to Drag. Attaching the regular mouse solves the issue.
    (Though not, interestingly, with the text in InDesign, the application I'm using throughout the day).
    Rob

  • Enable Drag and Drop from mail to inbox folder

    Using Outlook 2007... Somehow my drag and drop function has been disabled. I can no longer select an email and move it into a mail folder by dragging and dropping. I am able to right click and select "move to" but dragging and dropping is much
    more efficient with the volume of email I'm receiving. This happened to me years ago but the company's IT guy fixed it while I was out of the office. When asked he said I had typed a keyboard code unknowingly that disabled the function. Any ideas on how to
    regain the awesomeness that is drag and drop??

    Hi,
    Some users who encountered the same issue are able to resolve it by pressing ESC key for several times, you may have a try and let me know the result.
    If above doesn't make any change, we may try to right-click the email you want to move and drag it to the target folder, then select Move from the pop-up menu to see if it will work.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Drag and drop from mail to address book not happening

    Hi guys, I can no longer drag email addresses from Mail into Address Book. The address just bounces back. I've repaired permissions, installed the latest security update, repaired permissions again, rebooted twice. Any ideas?
    Mail 4.5. Address Book 5.0.3 (883). Mac OS 10.6.8. MacBook Pro 2.4Ghz Intel Core 2 Duo, 4GB Ram, 666MHz DDR2 SDRAM.

    Hi mbriscoe, I've since upgraded to Lion and the same downgrade of functionality exists. I can no longer drag and drop an address from Mail into Address Book. I now have to click name, wait for menu, select Add to Address Book, go into Address Book and find the name I just added, then drag the name into the specific group I want it to be in. It used to be very useful, the drag and drop, in an "it just works" kind of way. Now it's not.

  • Drag and Drop bookmarks doesn't work.

    The drag and drop functionality when organising bookmarks stops working after organising a couple of bookmarks (When it works at all)! Is this a Safari bug? Does anybody know how to fix this?

    I found the answer to my problems. The Torbutton add-on inhibits Drag and Drop functions (especially of Bookmarks). When I disable Torbutton, Drag and Drop works again. When I enable it, Drag and Drop stops. So, obviously, I disable it whenever I want to manually sort items with Drag and Drop.
    I have read that there are about 5 or 6 other add-ons that also inhibit Drag and Drop functionality, not just the Torbutton add-on. The list is somewhere in the main Firefox support section (but it's tough to find the answer there twice).
    The generic add-on troubleshooting page is at:
    https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes#w_disable-all-extensions

Maybe you are looking for

  • Saving PDF as 1.4 (Acrobat 5.x) after comments inserted?

    I have Adobe Acrobat Standard 9. I have printed an email, word file, etc to PDF ensuring using 1.4 in Distiller. I can open the file with Acrobat 5.0 However, if i make any editing, comments in the PDF file, when i save, it changes it to 1.6 therefor

  • Ical freezes with "the server responded with an error"

    Every time I open my calendar I receive "the server responded with an error."  The content of an old email is also showing under the message "the server responded with an error."    I am unable to access my calendar.

  • SMICM Trace: IctCmWrite: write(99) failed.  errno=28 [ictxxcache_r 4472]

    Hi, Our PI Production Java Stack is getting down very often. We need to restart every time. Yesterday we have found some set of Errors in Transaction SMICM Trace File. SET1: [Thr 3599] *** ERROR => IctCmWrite: write(99) failed.  errno=28 [ictxxcache_

  • Prod Orders:  KKRC vs KKRV

    We use KKRC during close-out each month.  I have recently heard about KKRV.  Can someone explain the difference between them.  Can we run both of them without any tables being updated twice for the production orders?

  • Customizing wrong SharePoint translation

    Hi, We are using SharePoint 2013 with a Dutch language pack installed. When multiple users "Like" a post in a social newsfeed, SharePoint translates "Henk and 2 others like this" to the dutch translation of "Henk and 2 others look like this", it's a