Drag and drop of html-files into Firefox 3.0.1 no longer works after going from XP to Win7

I use firefox portable 3.0.1 on an external disk.
Used to have a portable PC with XP SP2, now have a new Windows7 Professional machine.
On the XP machine I was able to open Firefox from the USB disk and drag&drop html-files into its window to open them. Suddenly on Windows7 this no longer works?? Any ideas/fixes?
Note: I do have to start the portable Firefox in XP SP2 compatibility mode, after which it seems to work fine (apart from this issue thus far)
A lot of configuration went in this Firefox portable install, so it would be nice to get this to work with a quick fix instead of having to start from scratch with a newer version.

-
It, .. or they, don't within either browser that I have installed - and am using, ..
.. they had previously, ... don't know what I did exactly to caused this circumstance.
.. is my question. (.. if not fully clear.)
Just looking to try to find out what I can do, either whether to "back-off" from what I've done - more recently, regarding the two different downloads that I've pointed to above, .. apparently - only, having, superseded a more simply configuration .. previously working.
This, or either, adjust the settings - broader / somewhere (more generally) - otherwise, .. in order to have these files, play, .. in browser.
Rm(richard583)

Similar Messages

  • When I drag and drop a wav file into garage band it is rejected. How to imposrt a wav file?

    Hi Everyone,
    I want to edit a voice recording, done in WMA format, in Garage Band.
    I saw a video in which the fie is simply draged and dropped in the timeline area, and the time line appears. Then youcan edit it.
    But when I drag and drop this WMA file into the editing area, it jumps back out to where I dragged it from.
    Is there any way to import WMA files intoGarage Band?
    Thank you, Giorafromny

    Giorafromny wrote:
    Is there any way to import WMA files intoGarage Band?
    not directly, you'll need to use some software to convert it to a format supported by GB:
    http://www.bulletsandbones.com/GB/GBFAQ.html#importformats
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I can't drag and drop iTunes music files into Roxio Jam 6 anymore and, now I have to import music one song at a time by using the " " or "-" buttons on the bottom. What is going on? G5 Dual 2 Ghz and OS 10.4.11

    Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC  machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
    Thanks in advance,
    Larry

    I found an solution.
    Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared.

  • Drag and drop simple ".mov" files, into 2 dif. browsers, no longer working

    -
    Did something, that caused my main drag and drop, of simple ".mov" files, into 2 different browsers - "Safari", Version 3.0.4, and "Camino", Version 1.6.8, .. to stop working.
    To be clear, this is regarding, just some simply ".mov" files which I have generated. (Individual hourly, weather images - like; in sequence. Generated, in / with, QuickTime - itself.)
    At this point, where dropped from a folder, into "Camino", .. it routes these back to my main desktop. - (Before the problem, .. played them, in browser.)
    "Safari", only brings up the folder that the main file is in — within a separate folder window.
    (As with "Camino", played these in browser, previously.)
    (Have gone into "preferences", either browser, .. and can't figure things from there.)
    Problem occurred follow two different downloads / installations
    "DjVu Browser Plug-in"
    http://www.caminova.net/en/downloads/download.aspx?id=1
    and, ..
    "Flash Player" (.. for Mac OS 10.4 - 10.5)
    http://get.adobe.com/flashplayer/otherversions/
    Have tried, either "uninstalling", .. or "trashing" these.
    (Uninstalled, "Flash Played" - with specific "Uninstalled" app.. / "Trashed" "DjVu Browser Plug-in".)
    Any help, certainly appreciated.
    Rm(richard583a)

    -
    It, .. or they, don't within either browser that I have installed - and am using, ..
    .. they had previously, ... don't know what I did exactly to caused this circumstance.
    .. is my question. (.. if not fully clear.)
    Just looking to try to find out what I can do, either whether to "back-off" from what I've done - more recently, regarding the two different downloads that I've pointed to above, .. apparently - only, having, superseded a more simply configuration .. previously working.
    This, or either, adjust the settings - broader / somewhere (more generally) - otherwise, .. in order to have these files, play, .. in browser.
    Rm(richard583)

  • When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder.  Why?

    When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder.  Why?  I have a heirarchical embedded folder structure under \Documents.  Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder).  Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file.  If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved.  This just started happening.  I noticed it after upgrading to Mavericks.  Is this a bug or could anything else be causing this?

    As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system.  It is isolated to "Column View"; the Icon and List views in Finder behave correctly.  Issue is being escalated to engineering, and Apple will call to report status in a couple days.  In all likelihood, this is a bug that will need to be addressed in a future update.

  • I use to drag and drop an web address into a link toolbar, can't seem to figure out how to do this...?

    I just upgraded to Windows 7 and with it I got the latest Firefox. There is nothing like learning 2 things at one time. On my old XP and 3.? all I have to do was drag and drop a web address into a link toolbar. Saving all my frequent visited or just sights I want quick access to, to a toolbar quick button. I have been playing with this for days and decided to try this Forum. I did find the Bookmark toolbar, but cant seem to figure out what is if for or if you can drop into it. When I right click it and Customize, it shows me add on buttons, but nothing to do with web addresses or alike...
    Bottom line; I want to be able to drag and drop a web address into a toolbar for recall latter and be able to edit the address with a right click at a latter date in necessary...
    Thanks, Mike

    You can drag and drop the favicon also known as the [https://support.mozilla.com/en-US/kb/Site+Identity+Button site identity button], at the left hand edge of the location bar onto a toolbar to bookmark the site.

  • Which Listener I should use if I drag and Drop an image/icon into a JPanel?

    Dar Friends:
    Happy new year.
    I try to drag and Drop an image/icon into a JPanel, and hope I can immediately detect it after DND,
    Which Listener I should use in this JPanel if I drag and Drop an image/icon into a JPanel??
    Thanks

    Thank camickr .
    I can dnd an image into a JPanel called JPanelOld already, I hope to use another JPanel or JTree to listen to any Dropped Image in JPanelOld later on so I can take some action in another JPanel or JTree.
    so what kind of Listener I should use for my purpose??
    where to add this Listeners??
    Happy New Year.

  • How can I drag and drop a Tidal job into another group?

    How can I drag and drop a Tidal job into another group? In Tidal Help, it says-
    In the Jobs pane, press and hold the Ctrl key and at the same time right-click and either individually select individual jobs within a job group or drag your mouse cursor over a block of jobs that you wish to select. You can only move multiple jobs between job groups if the jobs being moved are on the same level.
    Keeping the right mouse button depressed, drag the cursor to the job group that you wish to move the jobs to and release the mouse button.
    When moving jobs from one job group to another, you must decide if the moved jobs keep their original job group attributes or assume the calendar and agent characteristics of its new job group.
    A confirmation dialog, offers three inheritance options for the jobs moved to the "new" job group parent. Select one of the following options:
    However, when I attempt to follow those instructions, it doesn't work at all and there is no indication that it's even trying (i.e., I don't see the selected job following my cursor at all and all I get is the normal menu when you right click anywhere on the screen.)
    Is there another way to do this or is there a master setting that needs to be changed so that ability is enabled?
    Thanks.

    Go into edit mode for the job group group and just manually edit the section for Parent job/Group.
    Cheers

  • New JNDI name created for each drag and drop of database table into table

    Hi All,
    I'm using Netbeans 5.5 with Visual Web Pack with Mysql as backend. Whenever I drag and drop a database table into table component it creates new JNDI (data source) name for each table. I want to use single JNDI name for all tables. If I change the JNDI name to default name then the design disappears and shows error . Is there any option to set the JNDI name unique for all tables?
    Thanks in advance.

    Hi again,
    Well I've tried using the MouseListener / MouseMotionListener approach but it doesn't quite seem to work, although it does get the events correctly. I think the reason is that it doesn't interact correctly with the Java DnD machinery which is something that V.V hinted at. It's something that I may need to look into if / when I have more time available.
    I have to say though that I haven't had any problems with scrollbars - we're making fairly heavy use of large tables and if you drag over a table with a scroll bar and move to the top or bottom then it scrolls as you would expect and allows you to drop the data where you like. For this situation I've used pretty much the same approach as for the toy example above except that I've implemented separate source and destination TransferHandlers (the source table is read-only, and it really doesn't make sense to allow people to drag from the destination table so I've essentially split the functionality of the example handler down the middle).
    I'm not actually particularly in favour of messing too much with the mechanics of DnD, more because of lack of time than anything else. Guess I'll just have to put up with this for the moment. Doesn't help that DnD is so poorly documented by Sun.
    Thanks for all your help.
    Bart

  • Help, I can not drag and drop address book contacts into numbers.

    i have read the manual. watched videos on youtube, but I can not drag and drop address book contacts into numbers or pages.  I upgraded to Numbers 09.  set up the fields as stipulated, but when I drag a contact to the numbers canvas it just bounces back to address book.  I tried reinstalling 09 thinking it was a faulty install.  no luck.  Have tried dragging to balnk part of canvas, to the table, and to a table with fields, no luck. 
    Thank you.

    Could be a preferences setting. See Jerry's post in this thread.
    Regards,
    Barry

  • Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.

    Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.
    Summary :
    We are using SharePoint 2010 Ent edition and users were able to checkout Pdf files similar to local drafts folder like any other office file without any problem when they used office 2010.
    i.e
    Unfortunately ever since their machines upgraded with office 2013 recently , this functionality completely stopped working for PDF files. This has now become a big problem for the users when it comes to check out and replace PDF files.
    All browser plugins required for this functionality (i.e    SharePoint OpenDocuments Class ) are all available and active. All document libraries are configured to Checkout is required for editing files. Browser version
    used at the moment is IE9 (32 bit) version with windows 7. 
    Can anyone please help with this issue and any help to get away with this problem is much appreciated.

    Hi,
    Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
    Did this issue occur with Office files?
    I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
    And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Illustrator Default PDF, if open in Acro Pro, drag and drop other .ai files, will they also....

    Hi! I'm trying to archive (for myself and others for easy access) about 50 fairly complex .ai files in a single Illustrator Default PDF and maintain editability and preserve layer and grouping integrity for every separate file, and, i'm probably going to have to do this hundreds of times (at least!) in the future. Once i save the initial first pdf file through Illustrator (wish didn't even have to do this, but seems no way to do in Bridge), then open the resulting pdf w Acrobat Pro, can i then just select an entire folder's worth of ai files in Bridge, drag and drop them into the pages panel and still have the dragged and dropped files also preserve all their AI info and layer/ group integrity? An if not, thinking if not based on 20 similar experiments, what's a fast way to do this. Doing this manually each time: opening each file in AI then saving as AI pdf, then combining and arranging them all after the fact, would be, well, fairly effed in terms of time, carpal tunnel, arthritis etc. Experimented w Bridge PDF Output batching (terrible rasterized lo-res results, but great for its intended purpose) and just dragging and dropping into Acrobat (lose complicated layer names and info, all flattened to single layer). Any help most appreciated, and as i do not have regular access to das interwebs  (i live on a boat) would appreciate and heed gentle admonishment if i've misposted or broached any community etiquette here. I've researched this as well as i can but can't find anything efficient/ elegant not involving InDesign, and even then the details are skimpy. Thank You! Getting mentally exhausted and not a little loopy. Keep in mind had to teach myself both Illustrator, Acrobat etc with access to the very limited offline help menus (the boat), so a complex answer involving learning InDesign would be learning curve can't even imagine with everything else struggling to do. But if you're willing to babystep diagram it out for me or can find me a link that does i will not only be eternally grateful but will do my durndest to master it and pass it on....Thanks Again! lil mc szpf
    PS If it helps I'm running the diligent dogged dusty beloved workhorse CS4 Design Premium on 27" monitor 2010 Mac (OS X 10.6.8), and took advantage of rare housesitting net access to install all most recent updates of everything, i'm barely competent w AI, PS, BR and been tackling Acrobat for past couple of months now....

    im glad that somebody is atleast trying. perhaps i need to be more clear.
    i will step by step describe the issue in detail.
    1) i open an email that contains an attachment .dxf or .pdf
    2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
    3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
    4) i highlight the downloads arrow on the right top side of my browser and click it
    5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
    6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
    its really as if the drag and drop feature just dosent work IN FIREFOX.
    i can drag and drop files all day long everyplace else.

  • Drag and drop an email attachment into SharePoint Library

    Is it true that it is not possible to drag and drop a file attached to an email directly into a SharePoint Library?
    When I try I get the transparent effect and then an error message. Windows 7, Office 2013, SharePoint 2013.
    I would like to make sure it's not some configuration that can be changed.

    HI,not possible to directly drag and drop email from out look.You can save the mail as outlook template in drive and do drag and drop.please find the below links that explains functionality.
    http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
    Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • Can I drag and drop entire hard drive into and external hard drive?

    I want to back up my MacBook Pro before I send it in for optical drive replacement. However, the Time Machine back up app wants me to erase my external drive and reformat before it can back up my files. I already have information from other computers on the external drive, so erasing and restoring is out of the question.
    Can I just drag and drop my hard drives (Macintosh HD and BOOTCAMP) into the external hard drive?
    Will that transfer everything?
    As a side note, can anyone tell me why Time Machine doesn't work with the external drive? My dad has files on it from his Mac and I have a couple movies saved on it from this one. Is it possible to maybe partition the external drive to accommodate both and reformat only one partition without losing the other saved files?

    Hi
    +"So does reformatting make the external hard drive only usable by Macs/Time Machine?"+
    Not really. If the external drive is formatted as FAT32 you can read/write to that drive from any Mac as well as any PC. If the external drive is formatted as NTFS you can only read from it but you can read/write from any PC. You can write to an NTFS formatted volume if you use a 3rd-Party Utility such as MacFuse. If the drive is formatted as Mac OS Extended you can read/write to it from any Mac. Unless you install a 3rd-Party Utility (I don't know of any offhand) you won't be able to read/write to it from any PC. PCs don't know what a Mac OS Extended format is.
    As already mentioned TimeMachine will not work with any other format other than Mac OS Extended.
    +"Will I be able to use the same external hard drive to back up multiple Mac computers with Time Machine?"+
    Yes but only if that external drive has been formatted as Mac OS Extended. If there is existing data on that drive that you don't want to lose back it up first.
    +"Will I still be able to drag and drop movies into the external hard drive for basic storage?"+
    If you leave the external drive exactly as it is - ie no formatting - and you have already drag/dropped files to it from your mac or any other mac then you will be able to continue to do this.
    Tony

Maybe you are looking for