Drag and drop storage?

Hello
Can you just drag and drop data onto TC like movies, music, pictures etc without going through DU to create images?
Also I will not be connecting this to my Linksys router at all and can it be used in another part of the house and be used as a storage device or does it need to be connected to my wag325n router all the time?
cheers

Jason Umidi wrote:
I'm good?
you should be.
Then I can proceed to delete large portions of my iPhoto library?
you could but wouldn't have any backup if your TC goes south
If so, what changes does this make on the TC when the TM goes to do another back up?
none.
I"m assuming that it will still keep all my pictures in place but I don't know.
i'd rather get an external USB drive (they are dirt cheap right now) and move the pictures there. if that drive would be connected directly to your computer, TM can back that drive up, too.

Similar Messages

  • I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

    I am unable to create a new folder on either of my auxillary disk drives.  I can access the files and folders that were there when I transferred one of the drives from a PC.  Time machine uses one for backup and I want to use the other to store photos which are large files.  An help would be appreciated.

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • Can I drag and drop entire hard drive into and external hard drive?

    I want to back up my MacBook Pro before I send it in for optical drive replacement. However, the Time Machine back up app wants me to erase my external drive and reformat before it can back up my files. I already have information from other computers on the external drive, so erasing and restoring is out of the question.
    Can I just drag and drop my hard drives (Macintosh HD and BOOTCAMP) into the external hard drive?
    Will that transfer everything?
    As a side note, can anyone tell me why Time Machine doesn't work with the external drive? My dad has files on it from his Mac and I have a couple movies saved on it from this one. Is it possible to maybe partition the external drive to accommodate both and reformat only one partition without losing the other saved files?

    Hi
    +"So does reformatting make the external hard drive only usable by Macs/Time Machine?"+
    Not really. If the external drive is formatted as FAT32 you can read/write to that drive from any Mac as well as any PC. If the external drive is formatted as NTFS you can only read from it but you can read/write from any PC. You can write to an NTFS formatted volume if you use a 3rd-Party Utility such as MacFuse. If the drive is formatted as Mac OS Extended you can read/write to it from any Mac. Unless you install a 3rd-Party Utility (I don't know of any offhand) you won't be able to read/write to it from any PC. PCs don't know what a Mac OS Extended format is.
    As already mentioned TimeMachine will not work with any other format other than Mac OS Extended.
    +"Will I be able to use the same external hard drive to back up multiple Mac computers with Time Machine?"+
    Yes but only if that external drive has been formatted as Mac OS Extended. If there is existing data on that drive that you don't want to lose back it up first.
    +"Will I still be able to drag and drop movies into the external hard drive for basic storage?"+
    If you leave the external drive exactly as it is - ie no formatting - and you have already drag/dropped files to it from your mac or any other mac then you will be able to continue to do this.
    Tony

  • ITunes 11.1 and iOS 7.0.3 won't allow me to drag-and-drop videos onto my iPad?

    I finally updated my iPad 2 (16 GB; Wi-Fi) with the new iOS 7 update (7.0.3), and now it won't let me drag-and-drop items from my iTunes library anymore. It starts to, it seems.  iTunes says "Preparing to sync" and then that just disappears, and nothing else happens.
    Just the other night, I drag-and-dropped some songs onto my iPad (since my iPhone wasn't allowing me to, so I added them to my iPad instead; I'm getting a new iPod touch soon anyways, so this is only temporary), and it worked just fine.  This was before I updated my iOS 7 (iTunes was already at 11.1).
    I've restarted iTunes...many times...
    I've restarted my iPad...many, many times...
    I've restarted the PC...again...
    Checked my storage space; I have plenty for these six videos I want to add on here...
    I have had this iPad set on "manually manage" since I bought it.  It has never known any different.  I've manually synced movies from my old MacBook (backlight dead, and it's not worth the money I'd have to pay to replace it, since this is the second-to-last MacBook Apple made, so it isn't worth much anymore; and this MacBook still has Mac OSX 10.5, so iTunes 11 won't even work with it, so I haven't synced anything from it in MONTHS...), and to my last PC laptop (charging port is broken, so it won't charge even though it works fine when the battery is full; unfortunately, I haven't gotten around to ordering the new part yet).  I've only added three songs from this "new PC" that I'm borrowing.  To my knowledge, it doesn't matter how many different libraries you "sync" to a "manually managed" device, right?  Besides, I just synced music from this third library last week!! 
    What I just don't understand is why it let me the other day, and now it won't.
    And before I updated tonight, my PC didn't even recognize my iPad.  So I pretty much HAD to install that iOS 7 update that had been in my Settings since it came out.
    What is going on? I'm kind of sick of this...the only option it seems is to just completely sync to this one computer, but I'll lose pretty much everything except the few songs I put on here, and my videos.  I have pictures and apps and notes/documents that I DO NOT want to lose.
    Any suggestions?

    Oh, also want to add that the PC I'm currently using is:
    Windows Vista Home Premium Service Pack 2
    My other PC was:
    Windows 7 Ultimate
    My MacBook is:
    Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
    Not sure if this stuff is important, but I thought I'd add it.

  • Can't drag and drop songs anymore

    I can no longer click on a song or a group of songs and drag it/them anywhere - not to a playlist from the library, not from a playlist to another playlist, not to my ipod. used to be able to drag and drop anywhere and now nothing. i am using the manual update feature. anyone know how to get it working again?
    Busdriverwoody

    *it only lets me add songs via playlists.*
    Check your update settings. Connect your iPod and click on it's icon in the iTunes source list (the narrow pane on the left). This will bring up the preferences tabs in the main pane on the right. The first tab you'll see is Summary, look for "manually manage songs and videos", if there is a check mark there then the iPod is set to update manually and you have to drag songs from the iTunes library to the iPod to load them on. If you want to update automatically you need to remove the check mark from there (I would also remove the "enable disk use" check mark unless you want to use the iPod as a removable storage device) and click the Apply button in the right hand corner:
    Loading songs onto iPod automatically - Windows
    Managing content manually on iPod
    *And why can't I simply see the music on the iPod via iTunes?*
    Click on the chevron (the little triangle) to the left of the iPod icon This will display the various icons for the iPod itself, Music, Movies, TV Shows and Playlists. Click on Music and you'll see the traditional song list.

  • Drag and Drop e-mails to a SharePoint Online Folder

    Summary
    E-mail to a list is not available in SharePoint Online (yet) and it is difficult to move e-mails from Outlook to a SharePoint list for collaboration, storage and search.  The following steps will put a file on the users desktop that will open a SharePoint list and then you can drag and drop e-mails into the proper folder. 
    Step 1
    Create a drag and drop folder location for SharePoint Online e-mails
    1.       Go to your SharePoint Online shared documents location
    2.       Create the folder structure that you want for your e-mail storage
    3.       Click on your top folder
    4.       Click on Actions
    5.       Open with Windows Explorer
    6.       In the address bar at the top of the Explorer Window copy the address
    Step 2
    Go to Start, Computer
    1.       Click on Map Network Drive
    2.       Paste the address copied above into the Folder box
    3.       Check Reconnect at logon
    4.       Take note of the drive letter given or choose a drive letter
    *note these instructions are for Windows 7 – you can search help for Map Network Drive for the OS you are using
    Step 3
    Open Notepad
    1.       Type in the following:
    “explorer z:”  (leave out the quotation marks and enter the drive letter in step 2
    2.       Click File
    3.       Click Save As
    4.       File name OpenEmail.bat
    ·         Note the file name does not matter but the .bat has to be there
    ·         Save to the Desktop
    When a user wants to open the SharePoint location that stores e-mail they double click on OpenEmail.bat and it will open in an Explorer view which will allow for e-mails to drag and drop from Outlook into the folder.
    David Allred

    For drag and drop of emails from Outlook to SharePoint we are using a third party
    SharePoint Outlook Integration tool called PageLight. PageLight also offers
    Save Outlook emails to SharePoint functionality

  • More friendly drag-and-drop from grid view to folder

    From within the grid view, I do a multiple selection and drag the pictures to a folder on the left, to move all the pictures to that folder. If in the folder there is already a file with the same name as one of the selected pictures, the whole operation is cancelled. It is extremely annoying. LR might instead pop up a dialog asking if I still want to move the pictures that can be moved. Even better, the dialog should give options to overwrite the file in the destination folder, or to automatically re-name either file and stack them.

    ThatBenGuy wrote:
    On the page itself (icloud.com/iwork) it states "To get started, launch [Pages, Numbers, Keynote] on your iOS device and turn on iCloud."  This would lead me to believe you need to have the iOS version before you can even try using the icloud.com/iwork to upload files.
    I personally am not paying $10 just to test this, but if anyone else has tested this, it would be great to either confirm or deny this beyond just what I'm reading from it.
    Well, I have paid those 30 $ ( well 24 Euros ) for keynote,numbers and pages and yes you absolutely need at least one of these apps on your Device in order to unlock the "drag and drop" solution in the Browser. In other words - if you do not own a iDevice or not have one of that apps, you can't use icloud.com/iwork and its upload features at all.
    After all it is only for iOS iwork; Mac iwork09 does not sync to the cloud at all, regardless of "documents and data" set to yes in icloud on OSX.  On the contrary if you enable the same feature on your iOS5 device and set the iwork apps to store their documents in icloud, the syncing does start. So it kinda makes sense to force the presence of the iOS apps.
    iwork on iOS is pretty good, all 3 apps are high quality, come with those typical awesome templates and have tons of options to print,share and sync; but beware of the cloud storage thing : randomly documents in iCloud just delete themself.Go figure in the support forum for iwork for ios here - 100s users have experienced lost data using iwork for iOS in the cloud; So I turned this whole thing off again and sync my documents old fashioned via iTunes.

  • Drag and drop items to document librarys in outlook

    Hi guys,
    I've seen other post regarding this but there was no answer for the practice drag-and-drop e-mails or documents to documents librarys inside outlook ??
    can someone help me pls ?
    thanks in advance

    The best way to do this so that it is easy for your end users is to:
    Step 1
    Create a drag and drop folder location for SharePoint Online e-mails
    1.       Go to your SharePoint Online shared documents location
    2.       Create the folder structure that you want for your e-mail storage
    3.       Click on your top folder
    4.       Click on Actions
    5.       Open with Windows Explorer
    6.       In the address bar at the top of the Explorer Window copy the address
    Step 2
    Go to Start, Computer
    1.       Click on Map Network Drive
    2.       Paste the address copied above into the Folder box
    3.       Check Reconnect at logon
    4.       Take note of the drive letter given or choose a drive letter
    *note these instructions are for Windows 7 – you can search help for Map Network Drive for the OS you are using
    Step 3
    Open Notepad
    1.       Type in the following:
    “explorer z:”  (leave out the quotation marks and enter the drive letter in step 2
    2.       Click File
    3.       Click Save As
    4.       File name OpenEmail.bat
    ·         Note the file name does not matter but the .bat has to be there
    ·         Save to the Desktop
    When a user wants to open the SharePoint location that stores e-mail they double click on OpenEmail.bat and it will open in an Explorer view which will allow for e-mails to drag and drop from Outlook into the folder.
    David Allred

  • DRAG AND DROP, OR MOVE MAIL TO NEW SMART MAIL?

    HI,
    I DO NOT SEEM TO BE ABLE TO DRAG AND DROP OR MOVE OLD MAIL INTO NEW SMART LOCATIONS?
    CYFROMAYO

    Smart mailboxes are not storage locations. They are simply a kind of remembered search. You cannot put things in those mailboxes, they simply show anything found in other mailboxes that matches the criteria you defined.

  • Drag and drop from Thunar gvfs-mtp (android) to application fails

    So I installed gvfs-mtp, connected my phone with usb cable and I can work with the files on the phone in Thunar fine - well, almost fine. I can browse the files, doubleclick opens them without any problem. I can copy the files back and forth.
    What is not working well is drag and drop files into applications. E.g. drag-drop of media file to mpv crashes mpv, drag-drop to vlc does nothing. Drag-drop of a photo to GIMP shows "Could not open" error:
    Opening 'mtp://[usb:003,006]/Internal storage/DCIM/Camera/IMG_20150513_184133.jpg' failed:
    Could not open 'mtp://[usb:003,006]/Internal%20storage/DCIM/Camera/IMG_20150513_184133.jpg' for reading: No such file or directory
    Drag-drop of text file to mousepad fails too (the filename is shown in the titlebar, but mousepad is empty). Again, doubleclicking the .txt file opens it up alright.
    Perhaps it is the "mtp://" in file's 'URL' that is causing problems? Is there a way how to circumvent this?
    If I just mount the device by clicking on "Android" in Thunar, and then go to
    /var/run/user/1000/gvfs/mtp:host=%5Busb%3A003%2C006%5D/Internal storage/DCIM/Camera/IMG_20150513_184133.jpg
    everything works fine.
    What is the reason for "mtp://" stuff anyway? Why not just work with the filesystem, which is obviously properly mounted?
    Thanks in advance for any comments.
    Last edited by renergy (2015-05-31 09:28:49)

    MTP stands for media transfer protocol. It's used by some devices, including Android ones. I don't know much about it but according to this thread on the Ubuntu forums discussing a similar issue, mtp is generally rather temperamental. Link: http://ubuntuforums.org/showthread.php?t=2230932

  • Can't Bulk Drag and Drop Merge in Preview in Yosemite

    I have to file expense reports all the time which are essentially an assembly of a bunch of different PDF files.  In Mavericks I could print out a PDF of my expense report from our corporate expense site and then open that file in Preview, flip the view to "Contact Sheet" and then I can add all of my PDFs scans of my various expense receipts into that view via drag and drop from the Finder and it would add them all to the first PDF document. It was very easy and quick.
    In Yosemite, Apple has changed Preview in many ways.  One significant change for me is that I can no longer execute the above workflow.  Rather I have to open the first PDF file in Preview, flip it to "Thumbnail" view and drag and drop each file individually into the thumbnail view.  I also found the way the app behave is inconsistent....sometimes it ads and sometimes it doesn't, but I haven't been able to add multiple PDFs in one drag and drop like I always could in Mavericks.  Sometimes I have dozens of PDFs for expense receipts and this is a massive pain in the butt.
    I have downloaded 3rd party apps which let me go back to using my default workflow, but they cost $60 - when the utility provided with OSX worked fine before Yosemite was released.  Does anyone have any recommendations on how to use Preview in Yosemite as it worked in Mavericks?

    My issue is that I have a 64gb iPhone which connects to my Vista laptop where I have always chosen the option to manually manage my music. With the latest iTunes update I can't drag music to the iPhone because 'Manually Manage' is unchecked. Check it and I am told I will lose all the music already on the iPhone. But this was already there and Apple have created the issue for me by always making stuff purchased through iTunes the priority and any music files that have been created personally as a second-rate library (in fact Apple doesn't recognise such an idea can be possible - hence iCloud storage is for Apple purchases only). I'm damned if I am going to purchase an album I already have just to suit iTunes so I guess there are two choices. Find a program that is quicker, better, smarter and user friendly than iTunes or never update iTunes. It is often these little things that Apple let themselves down on these days. For people with music libraries that go into 100,000s tracks this is a pain and iTunes may not be the best program out there.

  • Can't see music even after drag and drop

    Since I was having the same problems with MM and MS, I tried the solution I saw several people post on here and have done the following:
    On my BB Pearl 
    options>media card
    media card support: on
    encryption mode: none
    mass storage mode: on
    auto enable mass storage mode when connected: yes
    Connected phone to pc using cable then dragged and dropped music files to E: drive music folder.
    Removed phone from pc but music files are still not showing up.
    Solved!
    Go to Solution.

    when you have your device plugged and you can browser it with Windows Explorer,
    delete all bbthumb.dat files in the Music\ folder.
    then unplug, and open the media application. And wait.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Why can't I just drag and drop photos from iPhoto on to my iPhone?

    This has been something on my mind for a long time. For some reason I can't just drag and drop certain photos from my computer on to my iPhone. Why? There both Apple products. Shouldn't it be easier? For some reason I have to go through iTunes to select which albums I would like to import, but I'm working with raw files. My computer has over 250 gb of storage space. My iPhone has 16 gb.  One of my even folders is 14 gbs. That would take up all the space on my phone. Is there a way to get around this? Why do I have to go through iTunes to put files on my iPhone?

    Only Apple can answer that question, so you'll need to ask them.
    But will your phone work with Raw files? If you're syncing from iPhoto via iTunes then that's not the raw file that's going over, it's the Jpeg preview from iPhoto.
    As for the space issue, make an album of the photos you want to sync.

  • "cgpdftops quit unexpectedly" when drag-and-drop/batch printing in Yosemite

    I have an annoying little frustration when printing certain PDF documents in Yosemite. It happens when I drag and drop documents from Finder onto an installed printer--i.e., dragging the document file onto the printer icon that has been copied to the desktop (essentially batch printing). Whenever this happens, I get a "Stopped - 'Filter' failed" error message, along with a "cgpdftops quit unexpectedly" lengthy problem report. After tinkering around for a while, I discovered that this only happens when the document is in landscape mode--if I drag and drop a document in portrait mode, it prints just fine this way. Furthermore, if I actually open the PDF document in Adobe Reader--even the landscape ones--I can print them all perfectly fine that way. It ONLY happens on LANDSCAPE documents when using the drag-and-drop print method. VERY STRANGE!
    A little background--I found this out when one of my users was attempting to do this with her newly-upgraded iMac and started receiving this message. She does a lot of batch printing because of the number of files she has to routinely deal with, and this saves her a lot of time over opening each file individually. She says she never had an issue with this when she was on Mavericks, and it only started when she upgraded to Yosemite. I ended up trying this on my own Macbook Pro running Yosemite and was able to replicate the problem on it. I've also replicated the problem on more than one printer of different brands, so I can eliminate that being the source. My user ends up sending the files to her coworker, who is running Mavericks, and is able to batch print the files successfully.
    I have been able to whittle it down to the issue simply being printing any PDF file in landscape mode to any printer from any Mac running Yosemite using the drag-and-drop/batch printing method. Numerous Google searches have gotten me nowhere with this. Some point to similar issues which throw this error message, but none specifically point to this particular issue. Certainly I can't be the only person who has tried this...
    Does anyone have any ideas?? I'm all out...

    How much storage space is left on the boot drive of the Yosemite iMac where the CUPS cgpdftops filter croaks? Are the printer drivers for the problematic printers current for Yosemite. Have you removed and reinstalled current printer drivers for the associated printers?

  • MULTIPLE-ROW drag and drop between 2 ALV grids

    Hi,
    Can anybody help me with acheiving MULTIPLE-ROW drag and drop functionality between 2 ALV grids.

    hi Prakash,
    Actually I'm trying to develop multiple drag and drop between 2 ALV's. To understand the events properly, I started working on this sample program where it uses 1 ALV and splits it into 2 and uses single row drag and drop between them. Now I'm making it to work for multiple drag and drop, so that I can use it on my application. This is the code which I'm working on..
    *& Report  Z_ALV_GRID_CONTROLS_DRAG_DROP                               *
    REPORT  z_alv_grid_controls_drag_drop.
    DATA   : i_ztransactions  TYPE TABLE OF ztransactions
                                   WITH HEADER LINE.
    DATA   : i_ztransactions2 TYPE TABLE OF ztransactions
                                   WITH HEADER LINE.
    DATA   : ok_code LIKE sy-ucomm .
    DATA : mcontainer TYPE REF TO cl_gui_custom_container .
    DATA : mcontleft  TYPE REF TO cl_gui_container .
    DATA : mcontright TYPE REF TO cl_gui_container .
    DATA : msplitcont TYPE REF TO
                            cl_gui_easy_splitter_container .
    DATA : malv_left  TYPE REF TO cl_gui_alv_grid .
    DATA : malv_right TYPE REF TO cl_gui_alv_grid .
    DATA : mrow TYPE lvc_s_row .
    DATA : gt_outtab_source TYPE ztransactions.
    DATA : gt_outtab_target TYPE ztransactions.
    DATA : g_repid LIKE sy-repid.
    DATA:   gs_layout TYPE lvc_s_layo ,
            g_behaviour_alv TYPE REF TO cl_dragdrop .
    DATA : mlines TYPE i .
          CLASS lcl_dragdropobj DEFINITION
    This is the Class of Drag Drop Object .
    This Object is used as a temporary storage means
    of the information extracted with drag
    CLASS lcl_dragdropobj DEFINITION.
      PUBLIC SECTION.
        DATA: i_ztransactions  TYPE ztransactions ,
              index TYPE i ,
              original_table(5) TYPE c ,
              proceed_trans(1) TYPE c .
    ENDCLASS.                    "lcl_dragdropobj DEFINITION
    DATA : mdata TYPE REF TO lcl_dragdropobj .
          CLASS DND_TOOLS DEFINITION
    This class contains the methods responding to the
    events ONDRAG , ONDROP , ONDROPCOMPLETE
    of the ALV Grid Controls
    CLASS dnd_tools DEFINITION .
      PUBLIC SECTION .
       METHODS:handle_user_command
                               FOR EVENT user_command OF
                               cl_gui_alv_grid
                               IMPORTING
                               e_ucomm.
        METHODS : handle_drag_from_left
                             FOR EVENT ondrag OF
                              cl_gui_alv_grid
                              IMPORTING
                              e_row
                              e_dragdropobj .
        METHODS : handle_dropcomplete_from_left
                              FOR EVENT ondropcomplete  OF
                              cl_gui_alv_grid
                              IMPORTING
                              e_row
                              e_dragdropobj .
        METHODS : handle_drag_from_right
                              FOR EVENT ondrag OF
                              cl_gui_alv_grid
                              IMPORTING
                              e_row
                              e_dragdropobj .
        METHODS : handle_dropcomplete_from_right
                              FOR EVENT ondropcomplete  OF
                              cl_gui_alv_grid
                              IMPORTING
                              e_row
                              e_dragdropobj .
        METHODS : handle_drop_to_left
                              FOR EVENT ondrop OF
                              cl_gui_alv_grid
                              IMPORTING
                               e_dragdropobj .
        METHODS : handle_drop_to_right
                              FOR EVENT ondrop OF
                              cl_gui_alv_grid
                              IMPORTING
                              e_dragdropobj .
    ENDCLASS .                    "DND_TOOLS DEFINITION
          CLASS DND_TOOLS IMPLEMENTATION
    CLASS dnd_tools IMPLEMENTATION .
      METHOD handle_drag_from_left .
    METHOD handle_user_command.
       DATA: lt_rows TYPE lvc_t_row.
        DATA: lt_rows TYPE lvc_t_roid.
        DATA: lt_row TYPE lvc_s_roid.
        DATA: mdata TYPE REF TO lcl_dragdropobj .
        DATA: dragdropobj TYPE REF TO lcl_dragdropobj .
    get selected row
        CALL METHOD malv_left->get_selected_rows
          IMPORTING
            et_row_no = lt_rows.
        CALL METHOD cl_gui_cfw=>flush.
        IF sy-subrc NE 0.
    add your handling, for example
          CALL FUNCTION 'POPUP_TO_INFORM'
            EXPORTING
              titel = g_repid
              txt2  = sy-subrc
              txt1  = 'Error in Flush'(500).
        ENDIF.
        CREATE OBJECT mdata.
        LOOP AT lt_rows INTO lt_row.
         mrow = lt_row .
          READ TABLE i_ztransactions INDEX lt_row-row_id INTO
                     i_ztransactions.
          MOVE i_ztransactions TO mdata->i_ztransactions .
          MOVE lt_row-row_id TO mdata->index.
          MOVE 'LEFT' TO mdata->original_table .
          e_dragdropobj->object = mdata .
        ENDLOOP.
      ENDMETHOD.                           "handle_user_command
      METHOD handle_dropcomplete_from_left .
      NB : the following data object MDATA is local to
      the method and contains the information from the
      import parameter of the method E_DRAGDROPOBJ
        DATA : mdata TYPE REF TO lcl_dragdropobj .
        DATA: lt_rows TYPE lvc_t_roid.
        DATA: lt_row TYPE lvc_s_roid.
        CALL METHOD malv_left->get_selected_rows
          IMPORTING
            et_row_no = lt_rows.
        CALL METHOD cl_gui_cfw=>flush.
        IF sy-subrc NE 0.
    add your handling, for example
          CALL FUNCTION 'POPUP_TO_INFORM'
            EXPORTING
              titel = g_repid
              txt2  = sy-subrc
              txt1  = 'Error in Flush'(500).
        ENDIF.
        LOOP AT lt_rows INTO lt_row.
          mdata  ?= e_dragdropobj->object .
          CHECK mdata->proceed_trans = 'X' .
          mrow = mdata->index.
          DELETE i_ztransactions INDEX mrow .
          APPEND mdata->i_ztransactions TO i_ztransactions2 .
          SORT i_ztransactions2 BY kunnr belnr .
          DELETE i_ztransactions2 WHERE kunnr IS INITIAL .
          DESCRIBE TABLE i_ztransactions LINES mlines .
          IF mlines EQ 0 .
            CLEAR  i_ztransactions .
            APPEND i_ztransactions TO i_ztransactions .
          ENDIF .
        ENDLOOP.
        CALL METHOD malv_left->refresh_table_display.
        CALL METHOD malv_right->refresh_table_display.
      ENDMETHOD .                    "HANDLE_DROPCOMPLETE_FROM_LEFT
      METHOD handle_drag_from_right.
        mrow = e_row-index .
        READ TABLE i_ztransactions2 INDEX mrow INTO
                   i_ztransactions2 .
        CREATE OBJECT mdata .
        MOVE i_ztransactions2 TO mdata->i_ztransactions .
        MOVE mrow TO mdata->index .
        MOVE 'RIGHT' TO mdata->original_table .
        e_dragdropobj->object = mdata .
      ENDMETHOD .                    "HANDLE_DRAG_FROM_RIGHT
      METHOD handle_dropcomplete_from_right .
        DATA : mdata TYPE REF TO lcl_dragdropobj .
        mdata  ?= e_dragdropobj->object .
        CHECK mdata->proceed_trans = 'X' .
        mrow = mdata->index .
        DELETE i_ztransactions2 INDEX mrow .
        APPEND mdata->i_ztransactions TO i_ztransactions .
        SORT i_ztransactions BY kunnr belnr .
        DELETE i_ztransactions WHERE kunnr IS INITIAL .
        DESCRIBE TABLE i_ztransactions2 LINES mlines .
        IF mlines EQ 0 .
          CLEAR  i_ztransactions2 .
          APPEND i_ztransactions2 TO i_ztransactions2 .
        ENDIF .
        CALL METHOD malv_left->refresh_table_display.
        CALL METHOD malv_right->refresh_table_display.
      ENDMETHOD .                    "HANDLE_DROPCOMPLETE_FROM_RIGHT
      METHOD handle_drop_to_left .
        DATA : mdata TYPE REF TO lcl_dragdropobj .
        mdata  ?= e_dragdropobj->object .
        IF mdata->original_table = 'RIGHT' .
          mdata->proceed_trans = 'X' .
        ELSE .
          mdata->proceed_trans = ' ' .
        ENDIF .
        e_dragdropobj->object = mdata .
      ENDMETHOD .                    "HANDLE_DROP_TO_LEFT
      METHOD handle_drop_to_right .
        DATA : mdata TYPE REF TO lcl_dragdropobj .
        DATA: lt_rows TYPE lvc_t_roid.
        DATA: lt_row TYPE lvc_s_roid.
        CALL METHOD malv_left->get_selected_rows
          IMPORTING
            et_row_no = lt_rows.
        CALL METHOD cl_gui_cfw=>flush.
        IF sy-subrc NE 0.
    add your handling, for example
          CALL FUNCTION 'POPUP_TO_INFORM'
            EXPORTING
              titel = g_repid
              txt2  = sy-subrc
              txt1  = 'Error in Flush'(500).
        ENDIF.
        LOOP AT lt_rows INTO lt_row.
          mdata  ?= e_dragdropobj->object .
          IF mdata->original_table = 'LEFT' .
            mdata->proceed_trans = 'X' .
          ELSE .
            mdata->proceed_trans = ' ' .
          ENDIF .
          e_dragdropobj->object = mdata .
        ENDLOOP.
      ENDMETHOD .                    "HANDLE_DROP_TO_RIGHT
    ENDCLASS .                    "DND_TOOLS IMPLEMENTATION
    DATA : mlistener TYPE REF TO dnd_tools .
    ======================================================
    START OF SELECTION
    ======================================================
    START-OF-SELECTION .
      PERFORM get_data .
      CALL SCREEN 100 .
    The screen 100 has the custom control MCONTAINER and
    on the flow logic has the following modules :
    PROCESS BEFORE OUTPUT.
      MODULE STATUS_0100.
      MODULE PREPARE_SCREEN .
    PROCESS AFTER INPUT.
      MODULE USER_COMMAND_0100.
    (Off course not commented out in the real flow logic)
          FORM GET_DATA                                 *
    FOR THIS EXAMPLE THE DATA SELECTION IS HARD CODED
    FORM get_data .
      CLEAR : i_ztransactions , i_ztransactions[] .
      i_ztransactions-mandt = sy-mandt .
      i_ztransactions-waers = 'EUR  ' .
      i_ztransactions-kunnr = '0000000001' .
      i_ztransactions-belnr = '0000000001' .
      i_ztransactions-bldat = '20030101' .
    i_ztransactions-dmbtr = '1000' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000002' .
      i_ztransactions-bldat = '20030202' .
    i_ztransactions-dmbtr = '1010' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000003' .
      i_ztransactions-bldat = '20030323' .
    i_ztransactions-dmbtr = '1020' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000004' .
      i_ztransactions-bldat = '20030404' .
    i_ztransactions-dmbtr = '1030' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000005' .
      i_ztransactions-bldat = '20030505' .
    i_ztransactions-dmbtr = '1040' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000006' .
      i_ztransactions-bldat = '20030606' .
    i_ztransactions-dmbtr = '1050' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000007' .
      i_ztransactions-bldat = '20030707' .
    i_ztransactions-dmbtr = '1060' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000008' .
      i_ztransactions-bldat = '20030808' .
    i_ztransactions-dmbtr = '1070' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000009' .
      i_ztransactions-bldat = '20030909' .
    i_ztransactions-dmbtr = '1080' .
      APPEND i_ztransactions .
      i_ztransactions-belnr = '0000000010' .
      i_ztransactions-bldat = '20031010' .
    i_ztransactions-dmbtr = '1090' .
      APPEND i_ztransactions .
      CLEAR : i_ztransactions2 , i_ztransactions2[] .
      APPEND i_ztransactions2 .
    ENDFORM .                    "GET_DATA
    *&      Module  STATUS_0100  OUTPUT
    The PF STATUS STATUS100 called from the module below,
    has on the Standard toolbar the buttons
    BACK , EXIT and CANCEL .
    These buttons are provided with function code = 'EXIT'
    MODULE status_0100 OUTPUT.
      SET TITLEBAR 'TITLEDRAGDROP' .
      SET PF-STATUS 'STATUS100'.
    ENDMODULE.                 " STATUS_0100  OUTPUT
         Module  USER_COMMAND_0100  INPUT
    The following module checks the User Command and ends
    the program
    MODULE user_command_0100 INPUT.
      IF ok_code = 'EXIT' .
        CLEAR : mcontainer ,
               mcontleft  ,
               mcontright ,
               msplitcont ,
               malv_left  ,
               malv_right .
        LEAVE TO SCREEN 0  .
      ENDIF .
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Module  PREPARE_SCREEN  OUTPUT
    MODULE prepare_screen OUTPUT.
      IF mcontainer IS INITIAL .
        CREATE OBJECT mcontainer
                      EXPORTING
                      container_name = 'MCONTAINER' .
        CREATE OBJECT msplitcont
                      EXPORTING
                      parent = mcontainer
                      orientation = 1 .
        mcontleft = msplitcont->top_left_container .
        mcontright = msplitcont->bottom_right_container .
        CREATE OBJECT malv_left
                      EXPORTING i_parent = mcontleft .
        gs_layout-sel_mode = 'D'.
        CREATE OBJECT malv_right
                      EXPORTING i_parent = mcontright .
        gs_layout-sel_mode = 'D'.
        PERFORM set_layout_capable_of_drag_dro
                      USING 'X' 'X' .
        CALL METHOD malv_left->set_table_for_first_display
          EXPORTING
            i_structure_name = 'ZTRANSACTIONS'
            is_layout        = gs_layout
          CHANGING
            it_outtab        = i_ztransactions[].
        CALL METHOD malv_right->set_table_for_first_display
          EXPORTING
            i_structure_name = 'ZTRANSACTIONS'
            is_layout        = gs_layout
          CHANGING
            it_outtab        = i_ztransactions2[].
        CREATE OBJECT mlistener .
        CALL METHOD malv_left->set_toolbar_interactive.
        SET HANDLER mlistener->handle_drag_from_left
                    FOR malv_left .
        SET HANDLER mlistener->handle_dropcomplete_from_left
                    FOR malv_left .
        SET HANDLER mlistener->handle_drag_from_right
                    FOR malv_right.
        SET HANDLER mlistener->handle_dropcomplete_from_right
                      FOR malv_right .
        SET HANDLER mlistener->handle_drop_to_right
                     FOR malv_right .
        SET HANDLER mlistener->handle_drop_to_left
                     FOR malv_left  .
      ENDIF .
    ENDMODULE.                 " PREPARE_SCREEN  OUTPUT
          Form  SET_LAYOUT_CAPABLE_OF_DRAG_DRO
    Definition of a Drag & Drop behaviour for the ALV
    grid
    FORM set_layout_capable_of_drag_dro  USING drag drop.
      DATA : effect TYPE i ,
             handle_alv TYPE i .
      CREATE OBJECT g_behaviour_alv.
      effect = cl_dragdrop=>move + cl_dragdrop=>copy .
      CALL METHOD g_behaviour_alv->add
        EXPORTING
          flavor     = 'Line'
          dragsrc    = drag
          droptarget = drop
          effect     = effect.
      CALL METHOD g_behaviour_alv->get_handle
        IMPORTING
          handle = handle_alv.
      gs_layout-s_dragdrop-row_ddid = handle_alv.
    ENDFORM.              " SET_LAYOUT_CAPABLE_OF_DRAG_DRO

Maybe you are looking for

  • Is there any way to remove the 'Java web start window' message on windows?

    This is unacceptable. You can download an application in any language and install it. If so many hoops have to be jumped through for security, and it changes the display to boot, this is simply not worth the (2 days!!) of effort is has taken to look

  • Business Server Page error in RWB -alertConfig

    In XI, RWB, when i click to open 'Alert Configuration', it gives an error message: Business Server Page (BSP) error What happened? Calling the BSP page was terminated due to an error. SAP Note The following error text was processed in the system: BSP

  • Copy / Paste / Delete Pages and group pages

    MUSE would be great if  we could copy /paste /delete pages and / or group pages Regards

  • Price condition determination for purchasing contract(ME31K)

    Hi Experts,      It is possible to apply  price condition determination in purchasng contract(ME31K)?  We had maintain the price condition for below keys: WBS/Material number and this condition record work well in purchase order. But I hope that this

  • IDES ECC 6.0 Service re: installation

    Hi Expert on IDES server, I was trying to re: install my IDES server bcos the initial one crashed on the hard disk. fortunately, it was install from a VMware (external drive). After going through the installation video, I tried to re-instal, it asked