Drag and Drop Success Message and Timer on all frames in Captivate

Hi All,
I am trying to do two things in a captivate project I am working upon currently. They are :-
1. I have a drag and drop exercise where I have chosen the setting that the drop does not accept the incorrect drag item and sends it back immediately. I am trying to make a success caption like 'Good Job' or somethign appear on the user putting all the drag source in the correct drop boxes. I am not using the submit button. Once the success caption appears the user can click on a next button to move to next slide. I am not able to put the success caption there.
2. I am trying to put an active timer on the slides so the user can see the total time of elearning, time elapsed or time left on all slides.
Can you guys help me out with these issues I have.
Thanks
Aashish

What did you do with the Submit button? Did you activate Auto Submit? Be careful with just deleting essential objects for D&D, same as for question slides.
Explanation about Success caption can be found in this article:
Drag&Drop tips - Captivate blog
There are two learning interactions, Hourglass and Timer that you can use (besides the work flow explained in the other article). And it is important to know the difference between 'editor's time' and real time. This is explained in the article that Sreekanth pointed to.

Similar Messages

Adjust Date and time for all Photos in an event?

Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?

How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode.

Report the date and time of all the systems reporting to sccm

Hi,
We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
Appreciate any help regarding this.
Thanks

Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Printing date and time in all pages

hi frds
i wants to display or print system date and time in every pages can anyone give me coding .
by
Pari Vendhan.R

Hi Pari,
Please write the system date and time in TOP-OF-PAGE event so that it will be printed in each page of output.
Example:
report zdatetime
line-count 60.
START-OF-SELECTION.
*-- write your code here
TOP-OF-PAGE:
write: 'Date: ', sy-datum.
write: / ' Time: ', sy-uzeit.
In top of page write other details along with date and time. Here in the above declaration after each 60 lines a new page will be triggered and TOP-OF-PAGE will be called for each page before first write statement.
Regards,
Yellappa.

Set date and time for all macs in the network

Hi,
I need to set the time and date for all of our Macs in the network, I have tried to have a look at Workgroup manager but I can not see anything.
Any ideas?
Thanks in advance,

Once the ntp setting is initially loaded, it should not need to be changed. But you know that, of course.
If you're looking to automate ntp configuration as part of system imaging (SIU, InstaDMG, etc) and client set-up, then that's certainly possible; that sort of discussion is regular fodder on the Mac Enterprise mailing list. (Check the archives over there for some interesting discussions.) Here are some related discussions that might interest you, too:
http://www.afp548.com/forum/viewtopic.php?showtopic=21477
http://www.afp548.com/forum/viewtopic.php?showtopic=20328
Also see man systemsetup for some details.
$ /usr/sbin/systemsetup -getnetworktimeserver
Network Time Server: time.apple.com
$
And here's a slightly-dated intro to client management.

My macbook and time capsule all died within the week. I can't turn the power on. any idea? is there a reset button?

My time capsule is dead. When I plug it in, there is no power.
The macbook just died yesterday before I could get another backup & wifi. It won't turn the power on any more. Is there a reset/reboot button hidden somewhere? Or do I have to bring it in and try to get all my info back?
Thanks.

TC die at around 3years.. earlier models generally faster.. so most a dead already.
There is nothing you can do.. either repair or dispose of it. Apple will not assist unless it is less than 3years old and you have applecare on a computer.
Even then they will replace with a refurbished of the same model.
Some of us do not like the throw away model Apple has adopted.. but if it is Gen 1 or even Gen 2 it could be time for update.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s
Macbook
These are seldom worth the expense of repairing. Once they are over 3years.. the cost of parts is a significant percentage of the new items.. the hard drive can be pulled to recover your files. Ask a tech in a repair centre for help doing that.

I cannot forward photos that are in emails I receive. I get a drop down message every time that I try.

I use windows 7 and windows live mail. The message says"One or more of the pictures in this message could not be found. When you send this message these pictures will not be included. Are you sure you want to save this message" I get no answer from inquiries to Microsoft. Perhaps you can help me.

Tools > Addons > Extensions
Disable the Adobe DLM extension and see if that message disappears.

Since downloading version 5, system has almost ground to a halt and "times out" all the time

Since downloading the upgrade, my system has slowed to almost stop, accessing Googlemail takes forever and freqently gets "timed out" as do most attempts to access the internet and web pages.
This has rendered the system all but useless. I have checked the cable connection, modem and router and all are working fine.
I am not technically competent with computers so at a loss to know what to do next.

Probably an extension
The last extensions I disabled were extensions that I did not use much so haven't looked to see which ones:
The following extensions were disabled 2011-06-26 so that Firefox 5 could run quicker. Their functions were not added to Firefox 5, just another case of losing more extensions and functionality due to updates. about:accessibility, about:me, Dom Inspector, FxIF, GoogleEnhancer, InspecterWidget, LinkChecker, Location Navigator. ''I'll have to check out Dom Inspector, specifically''
: I will check them out later first one I'll putting back will be GoogleEnhancer, which I only took out because all similar extensions have been a problem at one time or another some are now replaced by others (customize google, optimize google, mcafee site advisor, wot)
I am using 72 extensions now:
* http://dmcritchie.mvps.org/firefox/infolister_listing_fx4.htm#extensions
Be sure to check your extensions against
* http://kb.mozillazine.org/Problematic_extensions

Can't Drag and Drop in iMovie '11

I just started using this software, and for some reason it won't let me drag and drop video files to my project. I started with flv, then mov, and even mp4. None of them would work. I could import mp4 the long way by going through the menus, but I would much rather drag and drop. has anyone else had this issue?

Hey ya'll I just figured this out! I had scanned a bunch of photos for a wedding video. I then cropped them and changed the resolution in Photoshop and saved them all. When I went to save them, there was a box checked in Photoshop that said something like "Make photo available in Photoshop Organizer" For some reason when that box is checked, the file DOES NOT save with a .JPEG extension. So when I was naming a file "57" and choosing the "save as JPEG" option, it was saving as a JPEG but wasn't CALLED "57.jpeg" That's why I couldn't drop and drag them.
I found out by opening the properties boxes of a photo I could drag and a photo I couldn't drag and going through all the details. SO FRUSTRATING but I hope this helps someone else!!! Good Luck!!!

Changing the Date and Time of photos

Hello,
i have been importing images from my windows machine and want all the dates to be correct, i have seen the adjust date and time, and made the changes but under the events the dates dont change and when i click individual photos the dates and times are not changing.
so i was wondering how do i change the time for each photo and event? can i change the time to a start and finish date rather than just one date?
Any help with the above would be much appreciated.
Thanks

I have just looked at this again, i dont see an option to set both a start and end date, any ideas?
That is not an an option - and it makes no sense
You can do one of three things:
1 - add a constant delta to all selected photos thereby correcting an incorrect setting on a camera and preserving the sequence and integrity of the photos dates ad times
2 - change the date and time for all selected photos to a specific value
3 - change the date and time for all selected photos to a base value plus an increment for each successive photo.
There are two choices under the photos menu
1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
2 - batch change date and time - this simply changes the date & time to your selected value with an option to add an increment to each
Both have an option to modify the original photo which I do (I'm not sure why you would not want to modify the original)
And when i go into photos, the ones that i have altered by +Photos >>> Adjust Date and Time+ still have different times and dates, any ideas?
AS described in the iPhoto help and above
1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
So after adjusting time and date all photos selected will have the time and date changed by the same amount (a constant delta) and if they were all different before they will still all be different - if they were all the same before adjustment they will still all be the same but at a different value
LN

How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!

I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

Date and Time lost when upgraded to PSA/SE 3.0

I have upgraded from Photoshop Album Starter Edition 2.0 to 3.0 - my tags seem to be intact, but the dates on all of the photos reverted back to January 1, 2003 regardless when I took them. There was no warning about this happening, no recommendation to back up the files in a way to save the date info. I had spent hours posting corrected dates into many of my photos when accessed by PSA/SE 2.0 only to have all that work dissappear once the upgrade was installed. I liked being able to search for photos based on approximate date taken. I realize there is not likely any quick way to restore the dates, but if there is I'd sure like to know.

When updating I just followed the prompts. I did not choose to cusom install anything. I let the software do all the work.
A large number of my photos are not in the "Adobe" file and must be reconnected as well. I was hoping that once reconnected the date would return, but, sadly, I was mistaken. As I had mentioned when I first installed 2.0 I had to change the dates and times of all my pre - existing photos. They had also defaulted to January 1, 2003. Now I'm back to square one with them all.

HT1595 The date and time can't be set? What to do?

The date and time can't be set?

I'm having the same issue today on several of our Apple TVs. I am the Director of Technology in a school district and starting this morning I am getting reports that Apple TVs are not working and upon investigation they all sit at setting date and time. All network setting are properly configured. The firewall is set to allow port 123 both TCP and UDP from all internal clients. It occurs both over WiFi and Ethernet.
Is the Apple Time Server experiencing issues?

The date and time on my iPhone 5s is incorrect when I select Set Automatically. How can I resolve this?

My iMessage and FaceTime, among other apps, are unable to activate for some reason. Other forums have suggested I make sure my date and time are correct and are Set Automatically. I noticed that the time zone, date, and time are all incorrect. Any suggestions??

I'm sorry this is happening, loucm. When did this start? Please try resetting Network Settings. You can go to Settings>General>Reset>Reset Network Settings
Please keep us posted.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Getting last login dates and times for graphical/xwindows logins?

Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.

Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.

Drag and Drop Success Message and Timer on all frames in Captivate

Similar Messages

Maybe you are looking for