Drag and Drop to a Roxio product

Hi all,
I use toast and jam to burn my CDs. Up until today I would create my play list in iTunes, highlight the tracks and then just drag and drop them into toast or jam. Now, drag works, but no drop... none of the tracks will drop into either application. The only thing differenent is I loaded the latest update to iTunes.
What I am observing is that iTunes stays the active window and dragging the tracks on to either Roxio product does not change it to the active window so the tracks ghost back to iTunes.
I would hate like heck to have to get each individual file from its folder and have to drag and drop it into Roxio.
Any ideas as to what is going on? Could it be a GUI problem and not an iTunes problem?
JOE
PS
In the early days I had problems with burning CDs with iTunes. Toast and Jam has always worked for me so even when the issues with iTunes and burning got resolved I am so used to using these other products.

I checked again this afternoon and drag and drop works just fine with Toast.
My fault with the drag and drop on Jam though, I forgot that it will only accept .aiff files. Dragging and dropping .aiff files works fine.
Must be the heat getting to me today as it got to 104 degrees.
JOE

Similar Messages

I can't drag and drop iTunes music files into Roxio Jam 6 anymore and, now I have to import music one song at a time by using the " " or "-" buttons on the bottom. What is going on? G5 Dual 2 Ghz and OS 10.4.11

Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
Thanks in advance,
Larry

I found an solution.
Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared.

Is it too much to ask to make it an option to disable drag-and-drop altogether so I can finally ditch IE and start using your product?

I suppose drag and drop is a fine feature for those who want it but it irritates the crap out of me and it seems like it should be simple enough to add in a button or a check-box to turn it off.

Things to change:
Replace * with ^
Replace new with gcnew
Replace NULL with nullptr
Replace "pExcel->get_Workbooks();" with "pExcel->Workbooks;
That will care of most issues. There are a few arrays that also need fixing, such as "Object^ oArgs[]". For this you have to use "array<Object^>^ oArgs" (without the []). This one appears in 2 places and there's also "System::Object*
oParams[]" which needs to the same treatment.
This should get the code to a compilable state.

Drag and Drop (re-order) Thumbnails in Organizer

I am using Photoshop Elements version 5.0.2
I would like to re-order pictures in an order that will make sense for me in my business. I suppose I can go through each pix and change the time on them, so I can then sort by time stamp.
Is there an easier way to do this? I was hopeful that I could drag and drop them in Thumbnail view - but I cannot.
Thank you,
Jamie

>Is there anyway to delete the photos in the main well, without losing them from my collection?
As I understand the design, the main well is intended to be all the photos that you are managing with Photoshop Elements.
Collections are used to display a specific group of those photos in your chosen sequence for any given activity.
I suspect that since you are using a consumer product such as Photoshop Elements for your business purpose, you may need to make some compromises like having a default (the main photo well) display sequence which you see first when starting PSE that is not what you would choose.
This is not bad if PSE does what you want - just additional steps to switch to the Collection view and also to maintain (drag and drop) the sequencing of the collection when you add additional photo files to a Collection.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

If you could drag and drop pages before, it wasn't in Reader. You no doubt had Adobe Acrobat (Pro or Standard) which shouldn't be confused with Adobe Acrobat Reader. They recently added Acrobat to the name of Adobe Reader so the confusion about which product you had and/or have is understandable.

How can I drag and drop an item from one Tree control to another in LabVIEW 7.1?

You can use the mouse up and down event on the two tree controls but the problem is making the correct selection in the second tree control. I want to be able to switch over to the selection bar of the second tree control so that I can place my item in the correct position. I know all possible workarounds with double-clicks and so on... but I really want a windows drag and drop.
This is what I have for the moment. Please check the library below. I need to activate the selection bar of the second tree control somehow to get the position in the control. The VI below is written in LV 7.1
Attachments:
Drag&Drop.llb ‏65 KB

Hi Jones,
As far as I know this feature is currently not supported by the Tree control. A workaround, would be to use the vertical position of the mouse in the button up event to determine what line you�re dropping the item.
If you would like the Tree control to include the drag and drop feature, please submit this as a Product Suggestion under the feedback at www.ni.com/contact.
Good luck!
Best regards,
Philip C.
Applications Engineer
National Instruments
www.ni.com/ask
- Philip Courtois, Thinkbot Solutions

How do I transfer files/folders to an external hard drive without "dragging and dropping"?

Hi, I'm having a lot of trouble trying to transfer folders of pictures and individual pictures to my external hard drive (which God forbid isn't an Apple product). I attempted to drag and drop, which usually works. I have also attempted to find an option in any drop down menu which will allow me to import/transfer/etc. the photos from my Macbook to the external hard drive. This is maddening because the hard drive was immediately compatible and I can see everything that's on it already, I just can't really do anything with the content going either way. Is it because I need to compress things? Something like that? Any help or insight would be greatly appreciated.
Thanks,
William

William G 42 wrote:
, I just can't really do anything with the content going either way.
Make sure the EHD is Formatted Mac OS Extended (journaled
Format, Erase, or Reformat a drive
In iPhoto, Select All the Photos you want to move... Then Goto... > File > Export >
Choose the settings as seen here
Click Export and select your External Drive
Best to create a Folder to put them in... and away you go...
More Help available from iPhoto Toolbar Help Menu

PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

Windows 8.1, PSE 11
I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos. Then some freezing. A little added crashing. A plethora of other bizarre issues as well. This just stated happening a couple of days ago.
What I have tried:
Uninstall/Install.
Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it.
Kindly advise. Thanks!
Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 8139 MB
Free memory: 5185 MB
Memory available to Photoshop Elements: 3255 MB
Memory used by Photoshop Elements: 70 %
Image tile size: 128K
Image cache levels: 6
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660 Ti
Driver Version: 9.18.13.3750
Driver Date: 20140327000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 660 Ti
Video Card Memory: -2047 MB
Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
Temporary file path: C:\Users\evan\AppData\Local\Temp\
Photoshop Elements scratch has async I/O enabled
Scratch volume(s):
Startup, 931.2G, 805.4G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   1.486530
   aif_ogl.dll   AIF   3.0   1.486530
   amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
   AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
   AXSLE.dll   AXSLE   3.3   49.279053
   Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
   BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
   data_flow.dll   AIF   3.0   1.486530
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ems.dll   Elements Organizer   11.0
   ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
   FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
   FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
   filter_graph.dll   AIF   3.0   1.486530
   hydra_filters.dll   AIF   3.0   1.486530
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_compiler.dll   AIF   3.0   1.486530
   image_flow.dll   AIF   3.0   1.486530
   image_runtime.dll   AIF   3.0   1.486530
   JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
   MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop Elements Editor   11.0
   platform.DLL   Adobe Help System   1, 0, 0, 1
   Plugin.dll   Adobe Photoshop Elements Editor   11.0
   PSArt.dll   Adobe Photoshop Elements Editor   11.0
   PSViews.dll   Adobe Photoshop Elements Editor   11.0
   ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
Required plug-ins:
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
   Average 12.0.2
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 7.4
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Clouds 12.0.2
   Color Halftone 12.0.2
   Color Variations 12.0.4 (12.0.4x001)
   Colored Pencil 12.0
   Comic NO VERSION
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Correct Camera Distortion 12.0.2
   Craquelure 12.0
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   Difference Clouds 12.0.2
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Extrude 12.0.2
   FastCore Routines 12.0.4 (12.0.4x001)
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Grain 12.0
   Graphic Novel NO VERSION
   Graphic Pen 12.0
   Halftone Pattern 12.0
   Ink Outlines 12.0
   Lens Blur 12.0
   Lens Flare 12.0.2
   Lighting Effects 12.0.4 (12.0.4x001)
   Liquify 12.0.1
   Matlab Operation 12.0.4 (12.0.4x001)
   Mezzotint 12.0.2
   MMXCore Routines 12.0.4 (12.0.4x001)
   Mosaic Tiles 12.0
   Multiprocessor Support 12.0.4 (12.0.4x001)
   Neon Glow 12.0
   Note Paper 12.0
   Ocean Ripple 12.0
   OnEdge 1, 0, 0, 1
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Pen and Ink NO VERSION
   Photocopy 12.0
   Picture Package Filter 12.0.4 (12.0.4x001)
   Pinch 12.0.2
   Pixar 12.0.4 (12.0.4x001)
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Polar Coordinates 12.0.4 (12.0.4x001)
   Poster Edges 12.0
   Radial Blur 12.0.2
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.0.4
   Shear 12.0.2
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.0.2
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Straighten and Crop Image 12.0.4 (12.0.4x001)
   Straighten Image 12.0.4 (12.0.4x001)
   Sumi-e 12.0
   Texture Fill 12.0.4 (12.0.4x001)
   TextureSelect 12.0.4 (12.0.4x001)
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   Underpainting 12.0
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   WIA Support 12.0.4 (12.0.4x001)
   Wind 12.0.2
   ZigZag 12.0.2
Optional and third party plug-ins:
   Frame From Video 6.0
   Magic Extractor 12.0.4 (12.0.4x001)
   PhotomergeUI 12.0.4 (12.0.4x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices: NONE

Final Update: ...god willing...
OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
Wish me a lot of luck in the future.. I'm sure i'll need it!

Why cant I drag and drop my pictures into an order I want to display them

Why can't I drag and drop my pictures into an order that I want to display them ? The 'manual sort' option does not seem to be 'lit' nor does the 'reset manual sort' what am I doing wrong please.
ps
Beginning to wish I had stuck with a PC !

If you prefer a PC use it. No one here cares one bit
As to iPhoto, unless you take a few minutes to actually learn how to use it then you will never be happy. Same with any new PC program that you do not understand. Or a new car for that matter
A great place to start your education is here. http://www.apple.com/support/iphoto/
As to your specific issue, trivial. Make an album of the photos and manually drag them to the order you want. Events simply do not work that way
Try to drive your car in Park and you get nowhere because that is not how it works. Any time you use a product incorrectly you will have poor results
LN

Is it possible to create a tree with drag-and-drop functionality using ajax

I saw these samples;
Scott Spendolini's AJAX Select List Demo
http://htmldb.oracle.com/pls/otn/f?p=33867:1:10730556242433798443
Building an Ajax Memory Tree by Scott Spendolini
http://www.oracle.com/technology/pub/articles/spendolini-tree.html
Carl Backstrom ApEx-AJAX & DHTML examples;
http://htmldb.oracle.com/pls/otn/f?p=11933:5:8901671725714285254
Do you think is it possible to create a tree with drag-and-drop functionality using ajax and apex like this sample; http://www.scbr.com/docs/products/dhtmlxTree/
Thank you,
Kind regards.
Tonguç

Hello,
Sure you can build it, I just don't think anyone has, you could also use their solution as well in an APEX page it's just a matter of integration.
Carl

A drag and drop game with dynamic text response

Hi,
I am a teacher and my school has recently upgraded to Adobe Design Premium. Our previous version was about 5 versions out of date.
I teach A Level which requires students to create an Interactice Multimedia product.
In the previous 6 years, I have taught students how to create simple drag and drop game with dynamic text responses.
Since the upgrade to Actionscript 3.0 the dynamic text response has ceased working.
When creating the game from scratch, I need to move to Actionscript 2.0 as 3.0 does not allow me to add actionscript to objects - I know and am sure that this is a better way of doing things, but I would prefer to keep working the way I am used to.
I use a switch case statement which I have copied below to make the drag and drop work. The objects I apply the code to work in that they can be dragged, however, my dynamic text box with a variable name of "answer" is no longer displaying the response when an answer is left on a dropzone (rectangle converted to a symbol and given an instance name).
on(press) {
startdrag(this);
on(release) {
stopdrag();
switch(this._droptarget) {
case "/dropzoneB":
   _root.answer="Well done";
   break;
case "/dropzoneA":
case "/dropzoneC":
   _root.answer="Hopeless";
   break;
default:
   _root.answer="";
   break;
Any help would be much apeciated.
Thanks
Adrian

To drag in as3
blie_btn is the instance of the object drawin on the stage. In AS3 you have to assign a even listener, in this case MOUSE_DOWN, and MOUSE_UP, as we want the drag to stop if the mouse is not clicked. Then we fire the functions, and tell the object to start drag.
// Register mouse event functions
blue_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
blue_btn.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler);
red_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
red_btn.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler);
// Define a mouse down handler (user is dragging)
function mouseDownHandler(evt:MouseEvent):void {
     var object = evt.target;
     // we should limit dragging to the area inside the canvas
     object.startDrag();
function mouseUpHandler(evt:MouseEvent):void {
     var obj = evt.target;
          obj.stopDrag();
if you want to make the text do what you want then something like this might work.
In the function, you could add a text box onto the stage, give it a instance of something like outputText
and then:
outputText = ("Bla Bla Bla");
(^Not sure if this will work exactly^)
PS. I am currently a A-level student

Old Drag and Drop With Toast Issue:

I found this link to an old discussion, but it does not resolve my issue:
http://discussions.apple.com/message.jspa?messageID=9282890#9282890
I burnt two nice LightScribe labels, (nice because I cooked 'em twice for extra darkness, which takes time,) and then, after assuming that if I dragged and dropped my iTunes files to the desk top and then to Toast, as the above thread recommended, that since the files were accepted by toast doing things that way, that things were back to normal. I finished two beautiful CD's (I had a lot of work into the design of the labels,) by burning the music on to the disks. Well, my car cd player wouldn't play them, that is not normal, and I have two beautifully useless CD's which were the product of a lot of time and labor not to mention the cost of the disks... I've always been able to play back using the old process, (without the desktop drag and drop step,) - I'm running an iTunes version way beyond when this bug was supposed to be fixed. What do I do? How do I get back to being able to go directly from iTunes to Toast with successful playback? Thanks for your help with this!
Message was edited by: probassist

To anselmo Stiffan:
Which problem did you solve: the double click with one tap or three finger drag? I too have aluminum 2008 MacBook, and I found the preferences and accessibility section but seem to fail in finding the right combo of preferences I'm used to or like. Ok, so the three finger drag is good, but click or tab... drives me bonkers!!! Everything was fine for me even after updating to Mountin Lion back in July 2012, but then all of a sudden in October 'my trackpad doesn't work the same. I don't even want to get on the computer anymore, because I'm annoyed and I cannot click on my user account to login with plugging in a mouse or using keyboard shortcut functions. It's hit or miss with my trackpad working, it freezes after awhile, then I have to plug in the darn mouse. I checked my trackpad firmware, it said up to date....I may have to actually start a new discussion??? But to continue venting... Some menu's need one tap, some require double tap... I cannot use one click unless its set to left or right for alternate menu's. Its just bad in my carpel tunnel and frustrating... I've been searching discussions for similar issues and I saw this. I saw you had an older Mac? It's funny how I switched over 4 years to Mac and mine is almost obsolete? I'm afraid to take it in only to pay more money. I guess my real question besides double clicking option would be if other folks with "the older Aluminum" 2008 MacBook models are having similar problems?

Captivate Drag and Drop Functionality

Please could someone confirm when Captivate will ship with drag and drop functionality as standard rather than as an extension only available to subscription or ASA users?
Thanks.

Adobe doesn't usually give any advance confirmation dates for when they will ship a new product version or patch.

ITunes won't allow me to drag and drop songs into playlists

Running OS X 10.6.8 and iTunes 10.4 (80).
I cannot drag and drop songs within iTunes to create playlists or move songswithin playlists.
Here's what I've already tried:
-Reset iTunes Store cahce
-Log out & in of iTunes Store
-Quit & Restart itunes
-Rebuilt iTunes library (by moving iTunes Library.xml file and getting rid of .itl file)
-Checked info on iTunes folders so that permissions are both read & write
-Restart computer
-dug through a discussion of this problem on MacRumors and none of those solutions worked.
Getting frustrated and hate that I have to dig around in discussions and wait for the community to figure this out instead of Apple answering and solving the problem when their software doesn't work.
Has anyone figured out how to fix this? Aaaarrgh!

No, I haven't had any solution to this problem. None of the myriad of possible solutions work. Doesn't someone from Apple monitor these boards? I've given up in getting it fixed and am seriously ****** at the lack of response on Apple's part without me paying for an answer. This is a ridiculous way to support software, where I have to troll around a discussion board hoping someone stumbled upon a solution and will actually reply to this thread.
Considering the amount of Apple products that I own, you'd think I could get a freakin' response. Here's are the amount of apple products in my house, all bought within the past 3 years-
Mac Pro Quad Core
15" MacBook Pro
13" Macbook Air
3 Mac Minis
Three iPad's
2 iPhone 4's
2 iPod Touch's
But because it's on my Mac Pro, which is 1 1/2 years old, I can't get an answer to this! ***.

Why can't I drag and drop photos from iPhoto on my iMac to my iPad?

I have thousands of photos on my iMac and often want to copy a few dozen to my iPad to bring to my relatives. It seems that I should be able to create an album on my iMac and drag it to my iPad but I can't. Didn't Apple get where it is by making things simple like drag and drop? Why is it like a state secret to get some photos moved over? I'd really like to know the reason. I don't want a convoluted work-around. This isn't Windows!
Come on Apple, give us simplicity or at least a USB port to copy stuff!

Thanks for the reply. I guess I was a bit steamed. I know how to sync photos but object to having to treat my photos on the iPad in such an unintuitive way. Maybe I'm alone ( but I doubt it ) but I have photos on my iPad and iPhone for several different purposes. I keep photos of things I want to paint, photos of friends and relatives, photos of items I saw that I may want to buy and snapped the ISBN code. Photos of book list of authors I like that I want to read so if I see one in a used book store I remember which ones I haven't read yet. I don't think this is unreasonable or even something that only I want. I don't want to delete all of this every time I want to add another photo. I know I can back it up to my iMac and restore it plus the new photo later but this is not what I expect or want from Apple. I have had Apple products since the Apple II and Macs since March 1984 and it was because Apple always seemed to try and figure what the user wanted first and foremost but this seems to have changed. I would prefer most iPhoto and iTunes app versions from ten years ago to those coming out now because they valued intuitive interface over exotic features. Apple is the product 'for the rest of us' but not anymore it seems.
Maybe there are some good reasons why Apple is doing it, security, contracts, etc but I'd like to know. Maybe some of the users know and will give straight answers.
Thanks, for the info though.

Drag and Drop to a Roxio product

Similar Messages

Maybe you are looking for