Drag and Drop to Source Monitor but not Double Click?

Has anyone seen this issue? I've got an importer plugin. If you drag and drop a clip into the source monitor, then it works fine. But if you double click it then nothing happens. Any idea why this would happen? Normal clips (like MOV files) work fine so there must be something wrong with my plugin.
Thanks!

Thanks Steve! For any one else with the same issue, the actual culprit was setupOnDblClk.

Similar Messages

My mp4 movie files used to transfer from computer to iPad but now they will not Tried dragging and dropping to iTunes library but won't work anymore Plse help

I have mp4 movie files that i am trying to transfer to my ipad and it will no longer work. They will not copy to my iTunes library. I used to be able to transfer/drag and drop converted movies to my iTunes are the mp4 files maybe too big Although I have plenty of space

Howdy Anastasia,
I was thinking about why the songs arent importing and I feel that its either, A) the format of the files has changed since you last imported them, or B) you may need to rebuild the iTunes library.
Here is an article about doing just that:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Re-creating the iTunes Library file
Note: After re-creating your library, any devices that you sync with iTunes (Apple TV, iPod, iPhone, iPad) will see your iTunes library as a new library and will completely resync. The next sync with such a device will take longer and may reset some options since your rebuilt library isn't familiar to the device.
1. Quit iTunes.
2. Locate your iTunes folder (this is the folder that contains the iTunes Library and iTunes Library.xml files).
Operating System
Default location of iTunes Folder
Mac OS X
/Users/[your username]/Music
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\
Microsoft Windows Vista
\Users\[your username]\Music\
Microsoft Windows 7
\Users\[your username]\My Music\
3. Open your iTunes folder.
4. Drag the "iTunes Library.xml" or "iTunes Music Library.xml" file to the Desktop. If neither is available, learn how to add files back to the Library (because the XML file is not available, playlists and other information will not be available).
5. Drag the following file from your iTunes folder to the Trash:
Mac OS X
"iTunes Library" or "iTunes Library.itl"
Microsoft Windows
"iTunes Library.itl"
6. Open iTunes.
Important: Do not add any content into iTunes at this point (such as by purchasing something from the iTunes Store).
7. Choose File > Library > Import Playlist.
8. Navigate to the "iTunes Library.xml" file on the Desktop.
Mac users: Click Choose.
Windows users: Click Open.
If your Podcasts list in iTunes is empty after following these steps, learn how to add them back into iTunes.
Regards,
Sterling

Drag and Drop issue in Jlist - Transferhandler not working

Hi all,
I have a problem associated with the drag and drop of components into a Jlist.
When I drag component out of a Jlist, the control reaches inside transfer handler, but when I try to insert a component into the Jlist, the control does not reach inside Jlist transfer handler.
     jlist.setDropMode(DropMode.INSERT);
     jlist.setDragEnabled(true);
     jlist.setTransferHandler(new TransferHandler()
               List fileList;
               boolean export = false;
               List<File> newList = null;
               protected Transferable createTransferable(JComponent c)
                    System.out.println("inside handler");
                                ..............................Please help me with this issue.
Any help in this regard will be well appreciated with dukes.
Regards,
Anees

AneesAhamed wrote:
Hi all,
I have a problem associated with the drag and drop of components into a Jlist.
When I drag component out of a Jlist, the control reaches inside transfer handler, but when I try to insert a component into the Jlist, the control does not reach inside Jlist transfer handler.
jlist.setDropMode(DropMode.INSERT);
jlist.setDragEnabled(true);
jlist.setTransferHandler(new TransferHandler()
               List fileList;
               boolean export = false;
               List<File> newList = null;
               protected Transferable createTransferable(JComponent c)
                    System.out.println("inside handler");
..............................Please help me with this issue.
Any help in this regard will be well appreciated with dukes.If you're wondering why your createTransferable() method is not called when you drag from some other component and drop into the list it is because createTransferable() is called when you start dragging. So it would be the TransferHandler of the source component, not your target list, that has its createTransferable() called in that case.
When the list is the target of a drag&drop you should see the canImport() method of your TransferHandler being called. Do a System.out(0 in that method as well and see if that is the case.

Multi-row "Drag and Drop" works for some users, not others

      Background: We are working on Win7 SP1 clients, Project Prof. 2010, SP2
      A couple of users have reported that they cannot move ("drag") multiple selected rows in a task sheet, only a single row at a time. Other MS Project users around them (and myself) can move multiple rows with the "Drag"
feature. "Drag and Drop" is selected in the "Options/Advanced" section of both their local global template and the Enterprise Global.
     To my knowledge, the multiple row selections contain no collapsed summary tasks, in case that might be an issue.
     I'm suspecting some Windows setting is amiss on the offending clients, but wanted to see if anyone else had seen this behavior before in Project Prof. 2010.
     Thanks!
JTC
JAckson T. Cole, PMP, MCITP

    Thanks for the response, Shiva!
    User community is on MS Project 2010 (14.0.7011.1000) SP2, MSO (14.0.7128.1000)
    To reproduce the problem, MS Project user will select multiple task rows by selecting first row, then holding MB1, and "sliding" to the last row desired. The problem manifests itself by NOT turning the cursor into the "four-arrow cross"
after selection is accomplished. If only one row is selected, the ability to move that row alone is available.
     Again, only a couple of users (that have called me!) are seeing it. Their officemates are not having an issue.
     FYI ...
JTC
JAckson T. Cole, PMP, MCITP

Drag and Drop operation of SWT is not working in windows 7

I have created VB script to elevate all administrator permissions to user and launched my application but not able to drop image to label in my application on Windows 7. It works fine if I remove User Account Setting (UAC). Please help how I can solve it.

WTF? What are you talking about?
Drag and drop of what from where to where does not work how?
- What are you dragging?
- From Where?
- To Where?
- What do you expect to happen?
- What happens?
- Why do you expect that to happen?
- What technologies are you using?
Basically, read [_How To Ask Questions The Smart Way_|http://www.catb.org/~esr/faqs/smart-questions.html].

File can not be moved by drag and drop in the finder when not open Finder windows

With the operating system OSX Snow Leopard, it was possible, for example, a file from the desktop to pull drag and drop on the Finder icon, the page opened after a short and you could put the file in a folder.
At this stage I must first open the Finder to drag a file into the destination folder.
Is it a setting or is there anything wrong with my Mountain Lion properly?
It is often the case that several windows of other applications are open or in Fullscreen are, then I would, as I also already knew and am accustomed, for example a file regardless of the location from which drag drag and drop in the Finder without leaving the / program / site to open the Finder, before returning to the file then select I wanted to move.
Note: For all other programs it works.
Finder not only in where it makes the most sense.
   Picture 1: Finder window opens when you drag a file to the Finder icon
   Picture 2: Finder icon flashes but the Finder window does not open. Finder windows have previously by clicking on the icon in the Dock will be open to pull a      file into it.
   Thanks in advance for your help :-)

Yes, all I can tell you is that Finder does not have that function in ML. Your system is "working as expected".
You can file feedback here.

Trying to drag and drop a text parameter, but it only applies to one letter

Hiya,
In Motion 3, you could drag and drop a Text - Style Parameter to another text object.
Now, in Motion 4, when I try to drag a Parameter it only applies to the first letter of my text object.
So when I drag my Glow from one object to another, my Bleary In Behavior has a blue glow on T in THIS and a yellow glow on HIS in THIS.
I'm guessing this has to do with the ability to adjust each letter with the glyph tool. However, it won't allow me to drag the Parameter to each individual letter...
Which I see a need for...
But why would I want to do a time consuming thing like that?
It's stupid.
Any advice is much appreciated!
Thank you

Well, I'm not sure what to say. I can't replicate your problem. I can drag the outline parameters onto a text object in the viewer, layers pane, or timeline and it copies it exactly as it did in Motion 3, over the entire text object.
However, if I have the glyph tool selected and try to do the same thing, it crashes Motion 100% of the time.
Neither situation is what you're reporting though. It helped me find a bug, and something to avoid however.
Andy

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

Drag and Drop iPod Movies. Why Not?

You know, I have been wondering something for a very long time and I am amazed that I cannot find any threads anywhere by folks with the same thought process...
Why are there not commercially-available, pre-encoded, drag and drop files of movies and DVDs for iPod?
They make the PSP movies. Wouldnt this be a natural, with the sucess of the iPod and iTunes??
One goes to their neighborhood DVD retailer, buys an iPod-ready CD or DVD, takes it home and drag and drops the files into the iPod. Instead of wasting hours converting the DVD....
Food for thought during this commercially exploited holiday season....

This can happen if you don't have write access to the source folder, or if the source and destination are on different drives. Select the folder you're trying to move files from in the Finder and choose Get Info from the File menu; you can check and change the permissions in the Ownership & Permissions section.
(19396)

Drag and drop issues. I'm not alone.

So clearly I'm not the only one dealing with this, I've seen other topics with people running into this problem.
All of a sudden last night I was unable to drag and drop stuff around, copy and past, run a new program and I have no Spotlight. I've restarted Finder, the whole Mac, reset the PRAM, and even rand DU and repaired the disk. Nothing. Stil can't do stuff on it, and it's starting to get on my nerves.
Does anyone know of a solution to this? I've read many "temporary fixes" that haven't done anything for me.
Thanks!

Inaki wrote:
So clearly I'm not the only one dealing with this, I've seen other topics with people running into this problem.
All of a sudden last night I was unable to drag and drop stuff around, copy and past, run a new program and I have no Spotlight. I've restarted Finder, the whole Mac, reset the PRAM, and even rand DU and repaired the disk. Nothing. Stil can't do stuff on it, and it's starting to get on my nerves.
When you say, "All of a sudden" what were you doing on the computer? Do you have any 3rd party software installed. Any recent installs?
Does anyone know of a solution to this? I've read many "temporary fixes" that haven't done anything for me.
Create a new user and see if the problem exists with the new user. If not, then you most likely have a corrupted .plist or other file.
If the problem exists with the new user, then it's a deeper issue - more system related.
Your topic is a bit misleading - you have multiple issues - spotlight and the inability to run a new program. Is it possible that this new program is the problem?
Message was edited by: nerowolfe

Drag and drop from Contacts into Numbers not working - any solutions?

I'm trying to get my Contacts into a Numbers spreadsheet. According to the Help files, I should be able to select the Contacts and simply drag them into a Numbers sheet (after deleting the default Table). I've tried this many times over and the drag and drop feature doesn't seem to be working. I can select the contacts and drag them over, but the little contact card remains red when I drag it into Numbers and never turns green to allow me to drop into Numbers. It's the same whether I'm trying to drag one contact or many contacts at the same time. I've also tried exporting a vcard and then dragging that file from my desktop into Numbers, but that doesn't work either. I've tried quitting and reopening both applications, as well as restarting my computer. I'm running OSX 10.8.3 and have installed all new software updates, so I'm just at a loss for what to try next.
Does anyone have any solutions for this problem, or an alternative way to get my Contacts into a Numbers file?
Many thanks in advance!

When I tried, it put up a dialog asking me if I wanted to allow Numbers access to my Contacts. Is it possible you tried this and dis-allowed it access?
You might check, anyway. Open Security & Privacy System Prefs, select Privacy tab, and select Contacts from the list of items. Is Numbers listed and is it checked?
Another way to get the contact information into the clipboard is to create an Automator workflow like this:
Open Automator and select Workflow from the options presented.
Drag in the above actions and set the properties as you like. For the Get Contact Information action, you must set the export format to Spreadsheet (tabs).
For the new Text File action, I had to set the Encoding to Unicode (UTF-8) or it would fail.
Select all the contacts you want and then click the Run button in Automator. You can then open the text file with Numbers.
If you envision doing this often, start with an application instead of a Workflow and save it somewhere. Then, you can select your contacts and double-click the Application to export the contacts each time.
The benefit of this method is that you can select all the fields you want to include (at least more than is provided in Drag and Drop).

Drag and drop in newly shared folders not working

Hello,
Is can find some similar issues with GW8 Webaccess in the forum from some time back but not quite like what we are experiencing.
We are unable to move message into newly shared folders for which we have all the rights. No problems with folders that were shared before (GW7) only with new created ones. No problems in the desktop client.
What to do?

mazzel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Why does drag and drop between instances of Safari not always work?

I can drag a link from one instance of Safari to another and then without reason, it just stops working. Yet, if drag the link in one window to the address bar of the second it works just fine. If I start a new instance of Safari I can drag to it just fine. If I start a new tab, I can drag to it fine (until it fails too). Any idea as what may cause this?
Windows 7

Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
If not - please describe exactly what the problem is.

Drag and Drop BAPI service to workspace not allowed

Hi guru,
I'm following the VC modeler guide and try to make the first example (Sales Order) work.
After overcome some Sytem alias and Usermapping issue on Portal side, I finally can see a list of BAPI service when I click "Find Data" and then choose my client. Now I can search and see the BAPI_SALESORDER_.... services in the list.
However, I drag one of them to worksapce,..the mouse icon always shows "not allow(like traffic sign)" and I cannot add any BAPI service to my model.
Anyone encountered the same issue before ?
Anything I forget to enable ? ...like permission...
Thanks

Hi,
You cannot drag a BAPI directly to VC story board. Create an iview and drill down it and then add BAPI into that iview.
Regards
Basheer

Mass drag and drop in RF monitor

Folks,
All my 999 movements come into a general queue. From there, I move the 999 TO's into other queue's. Is it possible to move a bunch of TO's in 1 go into another queue without having the user to change queue?
MZ

Hi,
LRF1 transaction is for monitoring queue of warehouse persons & supervisor push the TO's from one queue to other queue.This transaction is a tool for controlling workload of particular queue. The transfer of TO's take place by drag & drop. I am doubtful about transferring mass To's to queue without manual intervation.
Regards,
Prashant

Drag and Drop to Source Monitor but not Double Click?

Similar Messages

Maybe you are looking for