Drag&drop datagrid - autoscroll

Hi,
I have two DataGrid with 5 rows visibles but with 20 data.
I enabled the drag&drop functionnality between two
DataGrid
and this is the following code for the dropping operation:
// avoid the default behavior
evt.preventDefault();
// remove the black line when dropped
evt.currentTarget.hideDropFeedback(evt);
[other code that will insert the row inside the datagrid, not
important...]
So, when dropping a row inside the other DataGrid, this
component will auto-scroll when I move the mouse up or down even if
the cursor is outside of the component. This never stop.
I don't know if it's a feature or a bug , but I'm trying to
list all eventlistener from this component so I can remove events
MOUSE_UP and MOUSE_DOWN in drop event so I can stop it.
Is anyone having similar issues ? Do you have any tips on how
I can list all evenlistener from a component?
Thank you!

"mr_bleu" <[email protected]> wrote in
message
news:gnelom$gpc$[email protected]..
> Hi,
>
> I have to boxes with 5 rows visibles but with 20 data.
>
> I enabled the drag&drop functionnality between two
DataGrid
> and this is the following code for the dropping
operation:
>
> // avoid the default behavior
> evt.preventDefault();
>
> // remove the black line when dropped
> evt.currentTarget.hideDropFeedback(evt);
>
> [other code that will insert the row inside the
datagrid, not
> important...]
>
> So, when dropping a row inside the other DataGrid, this
component will
> auto-scroll when I move the mouse up or down even if the
cursor is outside
> of
> the component. This never stop.
>
> I don't know if it's a feature or a bug , but I'm trying
to list all
> eventlistener from this component so I can remove events
MOUSE_UP and
> MOUSE_DOWN in drop event so I can stop it.
>
> Is anyone having similar issues ? Do you have any tips
on how I can list
> all
> evenlistener from a component?
I would think that this would be related to mouse_move?

Similar Messages

Drag & Drop on singleCell in Advanced Datagrid

Hi There
Is it posible to make a "Exel" like flex app where you drag from one cell to another cell to organise you data ?
Regards
T

Hello Cedric,
I'm sorry but I had the confirm from people at NI France support that you can't trigger an event drag&drop on the whole XCTL.
You can only trigger this kind of event concerning individual controls inside the XCTL. It trigger the event structure in "facade.vi". from there if you can get a queue to communicate between the xctl and the containing VI, you can get your state machine doing the event you want (with a producer-consumer structure).
It's not perfect but it is the only workaround we found at Nerys.
Sebastien DEVISSCHER - Nerys

Able to drag drop items of combobox but want to disable 1st item

Hello Sir,
I am able to drag drop elements of the combobox.
Here is my code...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" xmlns:local="*" xmlns:utils="adobe.utils.*" xmlns:controls="qs.controls.*" initialize="init()">
<mx:Script>
<![CDATA[
import mx.events.DragEvent;
import mx.events.ListEvent;
import mx.controls.dataGridClasses.DataGridColumn;
import mx.controls.ComboBox;
import mx.controls.Alert;
[Bindable]
public var str:String = "";
public var comboLength:int;
public function init():void
var xml:XML = <test>
<col>
<col1>one</col1>
</col>
<col>
<col1>two</col1>
</col>
<col>
<col1>three</col1>
</col>
<col>
<col1>four</col1>
</col>
<col>
<col1>five</col1>
</col>
<col>
<col1>six</col1>
</col>
<col>
<col1>seven</col1>
</col>
</test>;
cb1.dataProvider = xml;
comboLength = xml.col.length();
cb1.rowCount = comboLength;
str = (xml.col[0].col1.toString());
cb1.prompt = str;
public function closeHandler(event:Event):void
if(MouseEvent.DOUBLE_CLICK)
// Alert.show("Click Event");
public function changeHandler(event:ListEvent):void
// Alert.show("Single Click Event");
public function doubleClickEvent(event:MouseEvent):void
Alert.show(event.currentTarget.toString());
Alert.show(event.target.toString(),"Double Click");
public function dragEnterFunction(event:DragEvent):void
Alert.show(event.target.parent.toString());
]]>
</mx:Script>
<mx:ComboBox id="cb1" prompt="prashant" doubleClickEnabled="true" doubleClick="doubleClickEvent(event)"
close="closeHandler(event)" dragEnter="dragEnterFunction(event)" >
<mx:itemRenderer>
<mx:Component>
<mx:DataGrid itemClick="outerDocument.cb1.text = this.selectedItem.col1.toString();itemSelected(event)"
dragEnabled="true" dropEnabled="true" dragDrop="draDropHandler(event)" dragMoveEnabled="true" headerHeight="0" showHeaders="false"
creationComplete="init()" click="clickable()"
itemDoubleClick="doubleClickEvent(event)">
<mx:columns>
<mx:DataGridColumn dataField="col1" headerText="" id="da" disabledColor="white" />
</mx:columns>
<mx:Script>
<![CDATA[
import mx.controls.DataGrid;
import mx.events.DropdownEvent;
import mx.events.ListEvent;
import mx.events.DragEvent;
import mx.controls.Label;
import mx.controls.Alert;
public function clickable():void
//Alert.show("clickable");
public function itemSelected(event:ListEvent):void
Alert.show(event.itemRenderer.data.col1,"Single Click");
public function draDropHandler(event:Event):void
Alert.show(event.target.parent.toString());
public function dragEnterFunction(event:DragEvent):void
Alert.show(event.target.parent);
override public function set data( value:Object ) : void
this.dataProvider = value.col;
//outerDocument.cb1.text = this.selectedItem.col1.toString()
//myList.addEventListener(ListEvent.ITEM_DOUBLE_CLICK, onItemDoubleClick,
public function doubleClickEvent(event:ListEvent):void
Alert.show(event.itemRenderer.data.col1,"Double Click");
]]>
</mx:Script>
</mx:DataGrid>
</mx:Component>
</mx:itemRenderer>
</mx:ComboBox>
</mx:Application>
But now i want to disable drag drop of the 1st item and the last item.
And also add double click of each item.
Can someone please help me out.
Awaiting your reply.
Thanks in advance.

Hello Sir,
Thanks a lot for your reply.
I have implemented some thing can you please help me out with this?
In this can you help me out with the double click event????
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"
xmlns:local="" xmlns:utils="adobe.utils." xmlns:controls="qs.controls.*"
initialize="init()">
<mx:Script>
<![CDATA[
import mx.events.DragEvent;
import mx.events.ListEvent;
import mx.controls.dataGridClasses.DataGridColumn;
import mx.controls.ComboBox;
import mx.controls.Alert;
import mx.controls.listClasses.ListBase;
import mx.core.UIComponent;
public var str:String = "";
public var comboLength:int;
public function init():void
var xml:XML =
</mx:Application

WPF DataGridComboboxColumn selction fails if Drag&Drop is used

I've got a Usercontrol with TabControl including Datagrid for each tabItem. The Datagrid has 3 Columns, one as a combobox column.
Now I've implemented some Drag&Drop function for moving rows using PreviewMouseLeftButtonDown and Drop event. With that the Drag&Drop
is working fine. But I can't select from the combobox any more, the box opens and I can see the content but if I want to select an Item with the mouse it's selecting the datagridrow beneath the selectedItem of dropdown list. With the up/down key from the keyboard
I can select.
private void ConfigurationFileView_PreviewMouseLeftButtonDown(object sender, MouseButtonEventArgs e)
DependencyObject source = e.OriginalSource as DependencyObject;
while (source != null && !(source is System.Windows.Controls.ComboBox))
source = VisualTreeHelper.GetParent(source);
if (source != null)
// don't know what to do here....
else
DataGrid dataGrid = (DataGrid)sender;
rowIndex = GetCurrentRowIndex(dataGrid, e.GetPosition);
if (rowIndex < 0)
return;
dataGrid.SelectedIndex = rowIndex;
ParameterVM selectedEmp = dataGrid.Items[rowIndex] as ParameterVM;
if (selectedEmp == null)
return;
DragDropEffects dragdropeffects = DragDropEffects.Move;
if (DragDrop.DoDragDrop(dataGrid, selectedEmp, dragdropeffects) != DragDropEffects.None)
dataGrid.SelectedItem = selectedEmp;
private void ConfigurationFileView_Drop(object sender, DragEventArgs e)
DataGrid dataGrid = (DataGrid)sender;
int index = this.GetCurrentRowIndex(dataGrid, e.GetPosition);
if (index < 0)
return;
if (rowIndex < 0)
ParameterVM newParameter = e.Data.GetData(typeof(ParameterVM))as ParameterVM;
if (null == newParameter)
return;
ObservableCollection<ParameterVM> parameters = dataGrid.ItemsSource as ObservableCollection<ParameterVM>;
if (!parameters.Any(p => p.Name == newParameter.Name && p.Type == newParameter.Type))
parameters.Insert(index, newParameter);
else
if (index == rowIndex)
return;
if (index == dataGrid.Items.Count - 1)
MessageBox.Show("This row-index cannot be drop");
return;
ObservableCollection<ParameterVM> parameters = dataGrid.ItemsSource as ObservableCollection<ParameterVM>;
ParameterVM changedParameter = parameters[rowIndex];
parameters.Move(rowIndex, index);

Drag and drop within a datagrid is rather an unusual thing to do.
I would suggest your problem lies in choosing to do something which will cause complications.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Drag/Drop Question

I have implemented drag & drop using a datagrid and a list control. The items that need to be dragged are a simple value object that conatin data. Everything works as far as the drag/drop operations, however, I need to be able to know which item has been dropped. It's probably simple, but I can't find it. Can anyone help?

Just give each item an id
and listen to the
<s:List id="destList"
dragDrop="destList_dragDropHandler(event)"

Urgent : Drag Drop Functionality

Hi All,
I have a datagrid with the drag drop enabled. My requirement is that when I drag the items I shouldn't see the dragged item ( the entire dragged row as such ) but by default Flex has the functionality which shows the entire dragged rows content on mouse move. Please help me out like how can i make thie entire row's visibility to false when i move the mouse with the selected item in the Datagrid

When you perform drag and drop, you doesnt want to see the item which is getting dragged. Then don't specify the proxy (it can be image, data) which reflects while dragging.
On mouse move handler of the dragging object you will specify DragSource
For ex:
private function doDragOperation(evt:MouseEvent):void
var img:Image = evt.currentTarget as Image;
var temp:Image = new Image();temp.source = no_icon
temp.width = 1;
temp.height = 1;
var dsource:DragSource = new DragSource();dsource.addData(temp,
'img');
DragManager.doDrag(img, dsource, evt,temp);
Message was edited by: VijiNaga

Pb : WindowedApplication + item drag in datagrid

Hello,
I've a problem with my datagrid when i use it in the air application WindowedApplication.
When i use dragMoveEnabled="true" dragEnabled="true" dropEnabled="true" in the datagrid with scrollbar, i can't drag my item in the datagrid over the visible scrollbar.
It seams there is no bug in the flex application but there is in air application.
Is it a bug ?
thxs

Hello,
Is it possible to get some sample code and/or a short movie showing the behavior you've described? I just tried building an AIR app with the SimpleDataGrid.mxml example in the DataGrid documentation, and the drag/drop behavior over the DataGrid's scrollbar appeared to work correctly. Please feel free to post here or email me at [email protected]
Thanks,
Chris

ITunes crashes when try to add songs to library both drag-drop and Add folder/file option

I got the old iTunes updated, it crashed when open. Then I uninstall and download the newest iTunes. Restart my laptop.
I even start iTunes in safe mode but it keep crashing.
I try Add folder first, then Add file, then drag and drop. None of them work and I only have 700MB total of songs, no vids
There were no pop up for error code or anything, iTune just crash when I try one of those add options.
If anyone can help I would really appreciate

after I got offline yesterday, I tried drag-drop again, it worked.

I deleted the "desktop" in tiger, can't "alias", "copy" or "drag & drop" anything to it now, I get a message that "desktop can not be changed"

I was trying to make an alias of "SAFARI" icon to have on the desktop & in the dock as well, I managed to make the safari icon appear on the desktop, but when I wanted to switch from firefox to safari it wouldn't open / start safari, so OK, no big deal, I moved it the trash, ( by rt. click,>move to trash>click ) the horror starts here, everything on the desktop disappeared into the trash !!!!! ......
So I have tried to "drag & drop", "alias", "copy", "duplicate" to get things back out of the trash, but every attempt is met with a message "the desktop con not be changed", and whatever I try to bring anything out of the trash window, it gets a "minus - sign" added to it when it crosses over the edge of the trash window, and of course it jumps right back into the trash when the mouse button is released.
I think (barely) I will need the do a "clean install", or a "restore" from the install DVD to restore / get the desktop back.
And while the only thing on the desktop now is the HDD icon, clicking it open does not show the desktop in the Lf. column of the window where it should be, or any OS X folders when clicking on anything, but the OS is is running for this post and yahoo, etc., and there is a upward facing arrow next to the "network" name in the left column, that doesn't go away, like after installing some software, this is weird !!
Any solid ideas welcomed, and Thanks for reading my driveling post, ..... wayne146 .........
this is happening on my back-up machine, a G4 400mhz PCI, OS X TIGER 10.4.11 & 9.2.2 in classic ( all the 9.2.2 stuff does still show in the hdd when clicked )
I am having bigger troubles with my QS 800 dp, so I need this one to stay online, Please help !!!

to safari it wouldn't open / start safari, so OK, no big deal, I moved it the trash, ( by rt. click,>move to trash>click ) the horror starts here, everything on the desktop disappeared into the trash !!!!!
I am confused by what you did.
open / start safari
What did you do? This looks like a terminal command.
Or, did you click on the safari icon then right click on the safari icon then click on open?
I do not understand how you that moving to the trash would be helpful.
I suspect disk corruptions.
I run disk utility verify the file system on your starup disk. See below.
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK. Macintosh-HD -> Applications -> Utilities -> Disk Utility Start up disk utility. On the left pane view, you will see a list of all your disks. click on your startup disk. Click on the First Aid Tab. Click on verify. Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk First Aid from there to attempt to repair your file-system.

Can open Topics by drag & drop, but not by double-clicking in the DITA map

Hi,
evidently I made an error somewhere in my structure app, the result is that I cannot open DITA topics by double clicking them in the DITA map anymore (Framemaker does simpy nothing). I can, however, open them by dragging the xml files onto the Framemaker window. If I use the standard DITA 1.2 application everything works fine so I guess the problem is in my mapping.
Here is what I tried to achieve:
We need certain variations of the normal 'topic' type topic. The DTD should be identical, however different structures should be auto-inserted when creating a topic and the topic should have certain attribute values predefined.
The idea is that the author can select one of these topic types when creating a topic, but when opening an existing topic simply edit it with the standard topic temple.
Here is what I did:
I duplicated the topic.template.fm, renaming it say "topic_a.template.fm", "topic_b.template.fm" etc. (just an example).
I made adjustments to the EDD of these templates, changing the auto-insertions and the default values of some attributes.
In the structapps.fm file I added XML applications for these new topic types, mapping each application to one of the new templates, but to the original topic DTD and r/w rules. E.g. the application "DITA_1.2_topic_a" is mapped to the "topic_a.template.fm" template, and to the original "topic.dtd" and "topic.rules.txt" files.
In Framemaker I then created corresponding application mappings in the DITA options. E.g. the topic type "A" (which defines the visible text in the "New topic" menu) is maped to the XML application "DITA_1.2_topic_a".
The result:
It works as intended in every way when creating topics. The topics are saved with the standard doctype 'topic'. However for when I try to open topics from the DTD by double-clicking then nothing happens. Opening topics by drag & drop works fine though and they are opened with the normal (general) "topic.template.fm" template as desired.
Any ideas? Was this confusing or am I completely off somewhere?
Robert

Hi Robert...
When you say that you need "variations" from the normal topic type .. are those structural variations or just formatting? FM associates structure apps with XML files based on the doctype (root element). If your files all have the same root element, then they will all open with the same structure application (unless you specify a different one when opening the file or by importing a new EDD). It sounds like you really should be creating a specialization for each alternate topic type. If you don't, you'll end up getting the wrong "model" assigned to the wrong file.
Multiple EDDs (structure apps) can share the same DTD, and one EDD (structure app) can support multiple models. This is how the "ditabase" app works. There are lots of ways to set this up, but I think what you've done is probably not quite right.
The default structure app setup in FM11 and FM12 is very complicated to work with. I recommend creating a single app that supports many models. This isn't always possible, but it sounds like in your case it should be. I've set up one app that supports 13 different specialized topic models and it works fine.
Note that even though you've added structure apps for each model, if you end up opening the files using the default template, you are no longer using those modified models.
Sorry, but this is a bit more than can be dealt with appropriately in a forum post. If you'd like more help with this, feel free to contact me off list.
Cheers,
…scott
Scott Prentice
Leximation, Inc.
www.leximation.com

Unable to double-click or drag/drop files to open.

I'm running Photoshop CC 64 on a Windows 7 64 machine and am only able to open files in Photoshop by going to File->Open. Double-clicking from Explorer doesn't work and i can not drag/drop files into the open application window or taskbar icon. Right clicking on files and selecting "Open with" also doesn't work.
I checked file associations and made sure to choose CC 64. If I right click on the shortcut and choose "Run As Administrator" which I have to do in order to get files to open between Lightroom and Photoshop (both need to be Run As Administrator), I'm still unable to open from Windows Explorer. However, if I check the box to "Run this program as administrator" in the shortcut's Compatibility tab, I can double-click to open from Explorer but am prompted with a UAC warning every time. Dragging/dropping into the open app still doesn't work.
Opening between Bridge and PS works as expected so long as both programs are "Run As Administrator"
Been searching the forums here and seen suggestions of similar but not the same issue, at least not that I've found.
Anyone else experiencing? Suggested remedies?

This is an OS permission problem. Make sure you have ownership of the HD. Do a web search on how to check. External HD can be a problem for permission.

Reinstalling CS2, and dragging/dropping files does not work

I have Photoshop CS2. Or at least I
had it. I had updated my operating system to Tiger, and it just caused a bunch of files to change, nothing really bad. It gave me an error message upon opening photoshop that "files necessary for running Photoshop were missing from the Application Support folder"
So I read the advice on this FAQ:
Scott Weichert, "Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)" #, 29 Dec 2003 2:45 pm
And did what it said. I trashed the CS2 folder, and now when I try to re-install it my serial number won't work. Is my $400 serial number now permanently registered on a nonexistent platform?
As an active photographer and graphic artist, I need Photoshop constantly. So any advice would be greatly appreciated as soon as possible. Thank you.

The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
One way to get it back is to reinstall Photoshop, the other is to add this file again.
You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
It is only 3,7 KB big.
You put the file you download here:
[hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

How can cocoa app get attachment in Drag & Drop email(s) from Mail?

HI all,
I would like to drag and drop one or more emails from Apple's Mail application to a cocoa application and have the cocoa application find the path to the attachments in those emails. If I drag & drop a message from Mail to Text Edit, it creates a link with the message subject. If I hold the pointer over the link in Text Edit, it shows the contents of the link, which has the form:
message:%[email protected]%3E
If I click that link, it opens a new Mail window with the message. None of that is the message number as shown in Mail's viewer window.
I've also looked at what Pasteboard Peeker shows given a Drag & Drop from Mail. The above link data is from the public.url pasteboard type. Some of the others look interesting, but Pasteboard Peeker truncates the data read from the pasteboard, and the pasteboard types are probably nothing that we "supposed" to have access to since they have names like "Someone's super-secret pasteboard type". Any other ideas?

Thanks, a brody.
That tip takes me further down the field. And, I am able to do stuff like indent and change font color of my comments which is very helpful.
However, the big disappointment is that by dragging the original message to the Draft mailbox and then back to the original one after the edits is that it removes the original sender's name and puts mine in along with changing the heading info on date and time. That is, it creates a new message, rather than allowing me to modify the original one to suit my needs.
All the same, this was a very helpful tip. Thanks again.
Anyone know of a plugin?..............or two?....

R6034 error Photoshop CS2 drag & drop

I've had this problem for some time. I'm on Vista-64-SP2 running Photoshop-CS2 When first installed PS-CS2 worked fine. I got no errors when starting the program and I could drag & drop icons from the desktop or windows onto the Adobe taskbar icon and the photo would load normally.
Then I let Adobe automatically upgrade my CS2 and other Adobe products (Dreamweaver CS4, Illustrator CS2, GoLive6, Reader, Flash browser plug-in, etc.) and then I started getting a windows error message R6034 saying that "An application has made an attempt to load the C runtime library incorrectly." Microsoft says the fix is to recompile the application. Yeah right!
OK, so I delete Photoshop and other applications and reinstall them all and the problem goes away ... until I let Adobe automatically update the products and the problem comes back. Yes, I can probably live with an unupdated virgin version of Photoshop CS2 but there should be an answer from Adobe or at least someone else to validate that my complaint is not unique.
Another problem that may be related is that I've seemed to have lost the ability for Adobe GoLive6 to open Photoshop images for editing
Also I've lost the ability to drag & drop from the desktop or a window onto an open Photoshop application or onto its icon on the taskbar.
I've searched the web and find nothing similar. The solutions I have found were unrelated to my situation or were for a Macintosh. I've searched the forums here and find nothing that gives an answer.
I know pretty much what I'm doing around computers and I keep a clean system. Informed replies are most appreciated.

I don't think you will have much luck on that one. The problem here clearly is the way 32bit DLLs need to be piped on 64bit systems, which for some reason does not seem to work in your case, probably due to soem registry key being changed and then it messes up the wghole OLE/ DDE/ COM shebang. It may be further complicated by some dispaly routiner incompatibility. Since CS2 was never developed with Vista 64 in mind, you can't even exactly blame someone and this seems a common problem with an assortment of legacy apps, not just Adobe programs. What you could try is to download Sysinternals' Process Monitor, establish a filter rule specific to the updater and see, which registry keys it changes, which DLLs it replaces etc. this may then offer some clues as to which ones you need to salvage before the update and may possibly put back into place thereafter. May work, may not, but in any case you are doing it on your own responsibility....
Mylenium

Bridge CS5 Windows crashes when I command/move or drag/drop files internally

Bridge CS5 crashes with a Microsoft "report error" dialog whenever I drag images from one folder to another inside of Bridge, or use the right-click "Move To . . ." mouse command. After months of successful use of the Bridge CS5, this behavior suddenly began. Unfortunately, I can't now remember whether I did anything to my Windows environment at that time. Bridge does not have trouble with dragging or command/moving files into Photoshop, but dragging image files (jpg) from a search screen or the Windows Explorer can also end in a crash.
I'm running Windows XP SP3 32-bit on a 4-processor machine with adequate ram and lots of hard drive/scratch drive. I deinstalled every trace of Bridge and reinstalled the upgrade 4.0.2.1, which makes me up to date. Working with Adobe Support I also cleared and uninstalled, and then reinstalled Photoshop, Bridge, etc. to fix some other problems.
I have experimented with purging the Bridge cache for individual folders I was dragging from and to, but didn't purge all caches. Typically, the crash appears a few seconds after dragging/moving a file - continuosly sucking-me into thinking things are at last repaired. On occasion images are lost - i.e. really destroyed, or dropped into some limbo somewhere.
I'd be truly grateful for any ideas to try, no matter how extensive or simple.
Thanks!

Hi Robert,
I'm a developer from Br team. Thanks for reporting Br. problems.
It seems like a memory issue. Please try this to help us identify the root cause:
1. Disable all startup scripts (Edit->Preferences->Startup Scripts->Disable All), then restart Br.
2. When Br is running, kill "SwitchBoard" process in task manager.
3. When do Copy&Move operations, don't use Drag&Drop, try to use "Move To / Copy To" menu. (A known issue of Bridge, should be fixed in later versions)
Does the crash still happens?
Thanks very much!

Drag&drop datagrid - autoscroll

Similar Messages

Maybe you are looking for