Drag&Drop & Windows 7

Hi,
I'm testing Flex Builder (last release) on Windows 7 RC1, I have troubles with the native drag&drop functionality of an AIR application inside the development environment, the d&d doesn't works while testing the application with 'run' and 'debug' options inside the builder, d&d actually works if I deploy application and test it with the 'standard' AIR framework.... same code works on Vista and so on on the fly...
I have checked the forum and found another user having the same 'issue', perhaps some OS settings or security levels to grant to flex builder?
I know that W7 is not yet a RTM and is not supported so far, btw any suggestion is welcome.
TY.

Did you try a clean boot?
And does this works in safe mode or only a problem in normal Windows Mode?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Thank you for your reply!
The answer to your question is Yes, I tried it in Safe Mode and it does NOT work there either. (Please note that I made sure to say this in my OP, where I wrote: "The problem
DOES occur even in Clean Boot and Safe Mode!").
I hope you can help!

Similar Messages

Resizable and drag & drop window

Hi!
I need to build a window with title bar and close button to
display an internal movieclip (mc is in the same movie). Window
must be custom resizable and drag & drop. I don' t want to use
window component. Please, help me. Thanks in advance...

Here.
You can work out the rest of the kinks. Good Luck.

Magic trackpad won't drag-&-drop

Just find that i can't double tap-&-hold to use drag-&-drop. i can double click, but can't drag-&-drop.
However, i can use three fingers to drag-&-drop windows position, even files in finder.
Why? how to solve this? I'm using the latest iMac and Mavericks with Magic Trackpad.

If third-party software called "Air Display" or "AirParrot" is installed, remove it according to the developer's instructions, then reboot. Back up all data before making any changes.

Bridge CS5 Windows crashes when I command/move or drag/drop files internally

Bridge CS5 crashes with a Microsoft "report error" dialog whenever I drag images from one folder to another inside of Bridge, or use the right-click "Move To . . ." mouse command. After months of successful use of the Bridge CS5, this behavior suddenly began. Unfortunately, I can't now remember whether I did anything to my Windows environment at that time. Bridge does not have trouble with dragging or command/moving files into Photoshop, but dragging image files (jpg) from a search screen or the Windows Explorer can also end in a crash.
I'm running Windows XP SP3 32-bit on a 4-processor machine with adequate ram and lots of hard drive/scratch drive. I deinstalled every trace of Bridge and reinstalled the upgrade 4.0.2.1, which makes me up to date. Working with Adobe Support I also cleared and uninstalled, and then reinstalled Photoshop, Bridge, etc. to fix some other problems.
I have experimented with purging the Bridge cache for individual folders I was dragging from and to, but didn't purge all caches. Typically, the crash appears a few seconds after dragging/moving a file - continuosly sucking-me into thinking things are at last repaired. On occasion images are lost - i.e. really destroyed, or dropped into some limbo somewhere.
I'd be truly grateful for any ideas to try, no matter how extensive or simple.
Thanks!

Hi Robert,
I'm a developer from Br team. Thanks for reporting Br. problems.
It seems like a memory issue. Please try this to help us identify the root cause:
1. Disable all startup scripts (Edit->Preferences->Startup Scripts->Disable All), then restart Br.
2. When Br is running, kill "SwitchBoard" process in task manager.
3. When do Copy&Move operations, don't use Drag&Drop, try to use "Move To / Copy To" menu. (A known issue of Bridge, should be fixed in later versions)
Does the crash still happens?
Thanks very much!

Windows Storage Server 2008 - unzip with drag & drop from Windows 7 client fails

Hello.
As i asked this question in German and got no answer so i try it in English now.
I have the following problem:
We have a Windows SBS 2008, where we store our files. If somebody opens a ZIP-file on a network share from a Windows 7 Client (64 Bit) it is possible to drag & drop the content (multiple files) to a directory. So far everything works as expected.
We now have an additional Windows Storage Server 2008 integrated in our domain (Buffalo Tera Station WS-QV8/R5), where we also store files. If somebody opens the same ZIP-file on a network share of this server from a Windows 7 Client and tries to drag &
drop the content the following happens:
1. only one file is extracted and to display the file a refresh of the explorer view is needed.
2. when the drag & drop action is repeated a second file is extracted
Not alle files are extracted and there is no error message or indication why this happens.
The behaviour is reproducible from another Windows 7 Client (32 Bit).
If we try to drag & drop the files from the ZIP-file on the Windows Storage Server network sahre to a directory on the SBS network share all files are extracted correctly.
On the Windows Storage Server itself all files are extracted without problmems. Therefore it must be a problem with the combination of Windows Storage Server und Windows 7 Client accessing the files via network shares.
Are there any ideas where this problem could be located? Has anybody the same phenomenon and maybe a solution for it?
Thanks in advance
Michael Pruss

Hi Michael,
Thank you for clarifying the issue for us.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Regards
Kevin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.

PSE7 with Windows 7 - Drag & Drop Problems

Hello,
have some people experince in PSE 7 with OS Windows 7?
I have some problems with the Drag & Drop function. If I drag a picturce from the explorer into PSE7, PSE7 freeze and need two minutes to come back. Have somebody any idea / solution?
--> No updates available for the product (PSE7)
Greetings Daniel

Hi, It works good for me. can you please make sure that the file you are dragging is not too large or is not currupt. can you please confirm that it is opening fine in other applications like Windows picture viewer?

Drag&Drop between two windows

Hi
I am interested to know if in the latest version of abap webdynpro it is possible to do drag&drop between two windows?
And if it is possible to have a floating part of a window ( that I can move it around the screen )?
Thanks
Nitsan

Hi
Thank u Thomas and Chris for your helpful answers!
Still there is something I want to be sure about, the interaction that can be done between this floating window
and the opening window.
Can both window stay active and communicate between them?
Ill give an example of what I mean:
Lets say that I have window with few tables from this window I open another window with a list. now I want to dynamically
move an item from this list to one of the tables in the parent window or move an item from one of the tables to this list.
Can this scenario be implemented in abap webdynpro?
Thanks,
Nitsan

My Finder window doesn't display properly after drag & drop

When I do a drag/drop - maybe to add a mail attachment or insert a picture into Powerpoint - the Finder window changes/freezes in that it I can no longer scroll up or left - any ideas what might be going wrong?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Drag & drop stops working when I drag outside the top-level window

I have implemented drag & drop in my application, using the pre-JDK 1.4 approach. It works fine until I drag outside the top-level window, then back in again. My drop target receives a dragExit, but doesn't get a dragEnter when I drag back in. It then gets frequent calls to dragOver - but the DropTargetDragEvent says there are no DataFlavors available.
Is this a known problem with d&d? Is there a known workaround?
Thanks
- rick cameron

I could really understand that it annoys you. I tried it on my machine and the "save as" dialog box is placed correctly. I couldn't pull the box out of the monitor because the menue bar keeps me under it.
Do you have the application frame activated? Try turning it off. "window > application frame"
The problem might be here: The behaviors of the menu bar and dock are adjustable. Go to the system prefs and try playing around with the Mission Control settings. At work I have menu bar and dock on both monitors. At home I set the prefs so that only the main screen has menu bar and dock.
I'm just guessing. Don't beat me if this doesn't help.

Having trouble dragging/dropping files from my MacAir to a shared drive window, when I try to drag/drop gets bounced out. Can anyone help with advice on how to drag/drop or otherwise copy files to a shared drive? thanks in advance

I am having trouble dragging/dropping or otherwise copying files from my MacAir to a window for a shared drive.
When I try to drag/drop, files get bounced out.
Anyone know how to drag/drop in such a case, or otherwise copy files from MacAir to a shared drive (which I do not believe is on a Mac, not sure if that matters).
Any help much appreciated, thanks in advance
J.

I am having trouble dragging/dropping or otherwise copying files from my MacAir to a window for a shared drive.
When I try to drag/drop, files get bounced out.
Anyone know how to drag/drop in such a case, or otherwise copy files from MacAir to a shared drive (which I do not believe is on a Mac, not sure if that matters).
Any help much appreciated, thanks in advance
J.

Zen windows xp spk 3 drag & drop

$Zen windows xp spk 3 drag & drop I just installed my ZEN 4 GB but it will not allow me to combine files in the music files using drag & drop. Therefore I have multiple files for the same artist based upon CD name.
How do I make the Drag & Drop work so I can combine files?

> It works for the most part.
> I believe there are some advanced XP policies that may not be there
fully, but
> anything you try and do in Windows2000 will work under XP. ( Including
> policies)
> In normal operations, I have not found anything that does not work, but
I'm
> sure there are a few things here and there in group policies that are XP
> specific.
>
>
> [email protected] wrote:
>
> > Does Zen 3.x support Windows XP Pro? I am particularily interested in
> > group policies. Currently we have NW 5.1, Zen 3.0 SP1 and Windows 2000
> > workstations with 4.83 SP3. I have a user policy setup with Windows
2000
> > Group Policy. I will be installing some XP Pro workstations soon. We
use
> > Remote Control alot too. Just wondering what kinds of gotchas I may
be in
> > for.
> > Thanks
>
> --
> Craig Wilson
> CNE3, 4, 5 - MCSE - CCNA
> NSC Sysop (http://support.novell.com/forums/)
>
> Tech Writer - http://www.ithowto.com
> (I Peter 4:10)
>
>
Thank you for the quick reply. I will keep this stuff in mind throughout
my testing. I am under the impression that in order for the policies to
work, I will have to copy the GroupPolicies folder from an XP machine to
a network drive then open C1 on a W2K machine, and browse to that location
from the Windows 2000 Group Policy (Edit Policies.. button). Does this
sound right? Is this how you created the policies for XP?
Thank you

I deleted the "desktop" in tiger, can't "alias", "copy" or "drag & drop" anything to it now, I get a message that "desktop can not be changed"

I was trying to make an alias of "SAFARI" icon to have on the desktop & in the dock as well, I managed to make the safari icon appear on the desktop, but when I wanted to switch from firefox to safari it wouldn't open / start safari, so OK, no big deal, I moved it the trash, ( by rt. click,>move to trash>click ) the horror starts here, everything on the desktop disappeared into the trash !!!!! ......
So I have tried to "drag & drop", "alias", "copy", "duplicate" to get things back out of the trash, but every attempt is met with a message "the desktop con not be changed", and whatever I try to bring anything out of the trash window, it gets a "minus - sign" added to it when it crosses over the edge of the trash window, and of course it jumps right back into the trash when the mouse button is released.
I think (barely) I will need the do a "clean install", or a "restore" from the install DVD to restore / get the desktop back.
And while the only thing on the desktop now is the HDD icon, clicking it open does not show the desktop in the Lf. column of the window where it should be, or any OS X folders when clicking on anything, but the OS is is running for this post and yahoo, etc., and there is a upward facing arrow next to the "network" name in the left column, that doesn't go away, like after installing some software, this is weird !!
Any solid ideas welcomed, and Thanks for reading my driveling post, ..... wayne146 .........
this is happening on my back-up machine, a G4 400mhz PCI, OS X TIGER 10.4.11 & 9.2.2 in classic ( all the 9.2.2 stuff does still show in the hdd when clicked )
I am having bigger troubles with my QS 800 dp, so I need this one to stay online, Please help !!!

to safari it wouldn't open / start safari, so OK, no big deal, I moved it the trash, ( by rt. click,>move to trash>click ) the horror starts here, everything on the desktop disappeared into the trash !!!!!
I am confused by what you did.
open / start safari
What did you do? This looks like a terminal command.
Or, did you click on the safari icon then right click on the safari icon then click on open?
I do not understand how you that moving to the trash would be helpful.
I suspect disk corruptions.
I run disk utility verify the file system on your starup disk. See below.
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK. Macintosh-HD -> Applications -> Utilities -> Disk Utility Start up disk utility. On the left pane view, you will see a list of all your disks. click on your startup disk. Click on the First Aid Tab. Click on verify. Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk First Aid from there to attempt to repair your file-system.

Can open Topics by drag & drop, but not by double-clicking in the DITA map

Hi,
evidently I made an error somewhere in my structure app, the result is that I cannot open DITA topics by double clicking them in the DITA map anymore (Framemaker does simpy nothing). I can, however, open them by dragging the xml files onto the Framemaker window. If I use the standard DITA 1.2 application everything works fine so I guess the problem is in my mapping.
Here is what I tried to achieve:
We need certain variations of the normal 'topic' type topic. The DTD should be identical, however different structures should be auto-inserted when creating a topic and the topic should have certain attribute values predefined.
The idea is that the author can select one of these topic types when creating a topic, but when opening an existing topic simply edit it with the standard topic temple.
Here is what I did:
I duplicated the topic.template.fm, renaming it say "topic_a.template.fm", "topic_b.template.fm" etc. (just an example).
I made adjustments to the EDD of these templates, changing the auto-insertions and the default values of some attributes.
In the structapps.fm file I added XML applications for these new topic types, mapping each application to one of the new templates, but to the original topic DTD and r/w rules. E.g. the application "DITA_1.2_topic_a" is mapped to the "topic_a.template.fm" template, and to the original "topic.dtd" and "topic.rules.txt" files.
In Framemaker I then created corresponding application mappings in the DITA options. E.g. the topic type "A" (which defines the visible text in the "New topic" menu) is maped to the XML application "DITA_1.2_topic_a".
The result:
It works as intended in every way when creating topics. The topics are saved with the standard doctype 'topic'. However for when I try to open topics from the DTD by double-clicking then nothing happens. Opening topics by drag & drop works fine though and they are opened with the normal (general) "topic.template.fm" template as desired.
Any ideas? Was this confusing or am I completely off somewhere?
Robert

Hi Robert...
When you say that you need "variations" from the normal topic type .. are those structural variations or just formatting? FM associates structure apps with XML files based on the doctype (root element). If your files all have the same root element, then they will all open with the same structure application (unless you specify a different one when opening the file or by importing a new EDD). It sounds like you really should be creating a specialization for each alternate topic type. If you don't, you'll end up getting the wrong "model" assigned to the wrong file.
Multiple EDDs (structure apps) can share the same DTD, and one EDD (structure app) can support multiple models. This is how the "ditabase" app works. There are lots of ways to set this up, but I think what you've done is probably not quite right.
The default structure app setup in FM11 and FM12 is very complicated to work with. I recommend creating a single app that supports many models. This isn't always possible, but it sounds like in your case it should be. I've set up one app that supports 13 different specialized topic models and it works fine.
Note that even though you've added structure apps for each model, if you end up opening the files using the default template, you are no longer using those modified models.
Sorry, but this is a bit more than can be dealt with appropriately in a forum post. If you'd like more help with this, feel free to contact me off list.
Cheers,
…scott
Scott Prentice
Leximation, Inc.
www.leximation.com

Unable to double-click or drag/drop files to open.

I'm running Photoshop CC 64 on a Windows 7 64 machine and am only able to open files in Photoshop by going to File->Open. Double-clicking from Explorer doesn't work and i can not drag/drop files into the open application window or taskbar icon. Right clicking on files and selecting "Open with" also doesn't work.
I checked file associations and made sure to choose CC 64. If I right click on the shortcut and choose "Run As Administrator" which I have to do in order to get files to open between Lightroom and Photoshop (both need to be Run As Administrator), I'm still unable to open from Windows Explorer. However, if I check the box to "Run this program as administrator" in the shortcut's Compatibility tab, I can double-click to open from Explorer but am prompted with a UAC warning every time. Dragging/dropping into the open app still doesn't work.
Opening between Bridge and PS works as expected so long as both programs are "Run As Administrator"
Been searching the forums here and seen suggestions of similar but not the same issue, at least not that I've found.
Anyone else experiencing? Suggested remedies?

This is an OS permission problem. Make sure you have ownership of the HD. Do a web search on how to check. External HD can be a problem for permission.

How can cocoa app get attachment in Drag & Drop email(s) from Mail?

HI all,
I would like to drag and drop one or more emails from Apple's Mail application to a cocoa application and have the cocoa application find the path to the attachments in those emails. If I drag & drop a message from Mail to Text Edit, it creates a link with the message subject. If I hold the pointer over the link in Text Edit, it shows the contents of the link, which has the form:
message:%[email protected]%3E
If I click that link, it opens a new Mail window with the message. None of that is the message number as shown in Mail's viewer window.
I've also looked at what Pasteboard Peeker shows given a Drag & Drop from Mail. The above link data is from the public.url pasteboard type. Some of the others look interesting, but Pasteboard Peeker truncates the data read from the pasteboard, and the pasteboard types are probably nothing that we "supposed" to have access to since they have names like "Someone's super-secret pasteboard type". Any other ideas?

Thanks, a brody.
That tip takes me further down the field. And, I am able to do stuff like indent and change font color of my comments which is very helpful.
However, the big disappointment is that by dragging the original message to the Draft mailbox and then back to the original one after the edits is that it removes the original sender's name and puts mine in along with changing the heading info on date and time. That is, it creates a new message, rather than allowing me to modify the original one to suit my needs.
All the same, this was a very helpful tip. Thanks again.
Anyone know of a plugin?..............or two?....

Drag&Drop & Windows 7

Similar Messages

Maybe you are looking for