Drag line/connect question

Hi,
Is it possible to make a drag line question:
Attached screenshot is what we want.
We want to drag a line from left to right and when the question is right, a picture pops up.
When it is wrong a sentence telling it is wrong will show.
is this possible within Captivate ?
Joep

I managed creating matching questions for someone once (consulting task) using the interactive Drag&Drop widget from InfoSemantics. That was a question that had to lead to reporting, even with partial scoring which is not possible with the default matching question slides. And then you have total control of course. It means that you need knowledge of variables, advanced actions.
Do you need reporting, or a "zwart-wit" one if everything is correct? Or is just the appearance of the captions important? Maybe then the built in Drag&Drop will suit your needs.
Lilybiri

Similar Messages

New line connection question

I am currently in the process of moving my exisiting line and broadband over from Sky to BT.
My current line is connected directly to an exchange which is over 5km away, resulting in very poor and very slow broadband. Even through streets right next to mine have infinity!
As my current line is an exchange only line (EO) I am not going to be able to get any sort of high speed broadband at any time in the near or distant future
Hence my question...
If i request to have a 2nd line installed at my property, is there any way that this line could be connected to a local street cabinet (three within a stones throw of my house) so that I could then get infinity.
Many thanks

It all depends on the current line plant.
If there are spare cables coming from the exchange via the same route your line takes, you'd be connected to one of them. if there are no spare pairs then OR MIGHT connect you to a cab but it's a very long shot.
There's no way to request this when the order is placed either.
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Wireless vs. Hard line connection - Question

Hi. I've had my Mac Mini connect wirelessly for a month or so now. Today I ran a network cable directly from the Mac Mini to the back of my Router - I guess I'm hoping to increase performance of internet video playback. Would I see any performace improvements doing this?
So my wireless is on and I ALSO have this direct connection to my router. Do I have to do anything to ensure the Mac Mini uses the hard network connection instead of the wireless?
I don't want to turn off the wireless because I still want to connect to it wirelessly with some other devices, like my iPod Touch. Any insights would be greatly appreciated!

Reliability of the connection is the major advantage of hard-wired ethernet in your situation.
If there is a major mismatch between the speed your ISP provides you (Wide Area Network: WAN) and your internal Local Area Network (LAN), then you are correct that your LAN can't really speed up internet streaming. The WAN remains the bottleneck. Unless, reliability has been an issue. Then hardwired ethernet may improve streaming at times vs. wireless.
When dealing with LAN transactions between equipment in your house, hard wired ethernet will be faster than wireless, and more reliable.

Where is my line connected ??

Hi folks,
I am posting this again as it appears not to have gone live on the forums. I am getting conflicting information when I ask this question. Is my line connected to the Headford exchange or to the HRD1_002 cabinet ?
One person in sales have told me that I am connected to the exchange while other say they cannot tell. Here is a part transcript
"BXXXX: thanks for holding Damien, I have checked your address and as yet efibre is not enabled , there , you are connected to exchange Headford , I am checking exchange now for update"
I can send you the full script if you need.
Also I have recently seen some post here where you have confirmed the connected cabinet etc.
I have PM'd EircomAlan on this as he seemed to answer the above posts I have read. Can I find this answer out please.
Thanks for your time.
Damien

Hi IrishOmen
Your line is connected to the cabinet number "HRD1_002"
Cheers
Al

OAPs - Any special deals with line connection / re...

Hello - I think I may know the answer but are there any special BT deals available for OAPs regarding line connection and rental.
My inlaws have just returned to the UK after 30 years in Cyprus - moving to their own flat here in the UK - both aged 82
Solved!
Go to Solution.

Hi stevedan,
If your in-laws are in receipt of a pensions credit they may be eligible for the BT Basic service.
Cheers
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Post Moved Failure-to-get-a-new-line-connected

Postst moved to Phones Board http://community.bt.com/t5/Phones/Failure-to-get-a-new-line-connected/td-p/876554
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I know. I actually passed an OpenReach van 500 meteres from my house today. Stopped and asked if there was any way, at all, the guy could help me out or check on the status of the BT marked manhole cover outside my house (<1 min away). Was told 'Sorry, not my job, can't help you, I'm here to sort out another property and I'm lost'. I said I fully appreciated he had other work, but was there any chance he could take just 5 mins to help me out. I was told 'no way, not my area, sorry'. Said that OpenReach would need to commission a 'survey' of my property to sort this out. Frankly, he couldn't get out of there quick enough.
Sad thing is, my neighbour had an Engineer out (as I was promised by BT) and it was all sorted in a few minutes and was simply activating a connection in the exchange box (or whatever it is) outside my house.
Crazy thing, is they will just end up sending another OpenReach van out to sort this out. At some point. Maybe.
As you say . . . OpenReach just do what they want. I don't blame this guy specifically, but it would be nice if he took a second out to help everyone out.
BT call centre, meanwhile, just helplessly say that they can't tell me any more for 36 hours.
<rant over>

Safari connection question

I got my iMac a couple of weeks ago and it is my first Mac computer. I believe I set up my network connection correctly but whenever I load Safari I almost always get the error message saying I am not connected. Once I wait a few seconds it will connect automatically and take me to my home page. Is this normal? Is there a setting I can change so I don't get the error message and it will load properly? I have Safari 3.2.3 if that helps. Thanks.

Hi
Welcome to Apple Discussions and Mac Computing
Safari is particular about the server codes supplied by Internet Providers. Seems to function better by adding other codes. To add the codes, go to Apple Menu>System Preferences>Network. Click on your internet connection - either Ethernet or Airport, then select the "advanced" button. In the DNS panel enter on separate lines the following OpenDNS codes: 208.67.222.222 and 208.67.220.220. There may be codes from your IP, which ought to be greyed-out. No need to change them. Select "OK", then "apply".
In the Network panel, if Ethernet or Airport (whichever you use) is not at the top of the list, click on the "gear icon" at the left bottom. Select "set service order". When the help box opens drag your connection type to the top of the list. Select "apply" when complete.
Restart Safari.
To better familiarize yourself with your new Mac, have a look at this Apple support page.

New line installation question

I live in a house that has never had a line connected, so I am having a new line fitted. I am having phone and infinity 38Mb. Will the installation engineer just fit one master socket to be used for the phone and modem, or will they fit a seperate point for the modem in another area of the house? If they do, would this be an additional charge?
Thanks

So usually an extension would be counted as additional work then? In that case I may be better to just buy this DSL extension kit from ebay for £10 and do it myself. 15M BT ADSL INFINITY FIBRE OPTIC RJ11 TO BROADBAND MODEM EXTENSION CABLE LEAD

3D Line Graph.vi not displaying line connecting data points.

I'm having trouble getting 3D Line Graph.vi to display the line connecting my data points. I'm collecting latitude, longitude, and depth data from a binary file, loading this data into arrays with a while loop, and sending those arrays to 3D Line Graph.vi. When I tried doing it with arrays created by random number generators, the line is displayed, but when I use it with my actual data, no lines are displayed. I can only see where the data points are when rotating the 3D graph. Any ideas on this would be appreciated.
Thanks,
Morgan
Attachments:
Plot Depth.PNG ‏61 KB

Karunya,
Thanks for the info on the 3-D Curve VI. I tried it and it works. I think I was able to find the problem with 3D Line Graph.vi. It has something to do with plotting very close points away from the origin and scaling the axes to view the line. I have attached an example of where the vi breaks down. In this example, you can see that part of the line is drawn, but when you rotate the graph, you can see that the line is not drawn through all of the points. If you change the scale of the axes, then you eventually get the line to go through all of the points, but then the graph is not very "readable" at that point. It's when you try to zoom in really close to the plotted points.
Thanks!
Morgan
Attachments:
3d Line Graph Error.vi ‏16 KB

Line connecting two bars of a floating bar chart

Hi All,
I am using floating bar chart for one of my functionality showing flows over time...
I need to draw one dashed line connecting two bars ..
Attaching the image for reference ..
Pls guide me how shd I achieve this ...
Thanks

Morning Art,
I hope you had a good weekend.
Yes! I know what you mean because I have the same issue. If for example there is one record out of 10 records, the chart fills the whole width of the page with blue rectangle within the chart, and showing 1 on the x-axis (one big blob of blue colour within a chart).
It looks very bad though I didn't find any solution to the problem either. however if I do, I will let you know.
Regards
Jehanzeb

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Hi, do you mean a real Dial-up Modem as in the old days?
As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
http://www.zoomtel.com/products/dial_up_external_usb.html
Or is the Modem on the other end Cable/DSL/FiberOptic?

Drag and drop questions in scjp

hi all,
i m planning to write scjp this month..
can anyone tell me what 'drag n drop' questions like?
and what kind of questions are generally asked?

Well you can't change your answer for the drag and drop i mean you can but if you try to go back and try to see your question again for drag and drop then your answer is going to be deleted and then you had to redo the whole thing.
So i suggest please make your decision at the same time. Drag and drop are not hard i mean something like this
System.out.printf("Pi is approxmicately", Math.PI);
Pi is approximately ______
Place the value for PI 3.14
3.145
Something like that Good luck

Drag and Drop Questions in ocjp6

Hi friends, I'm about to take my ocjp6 exam the following month. Does the exam has DRAG AND DROP questions or I have no need to worry about it? Any latest exam takers? or any one who's aware of it kindly help me with your guidance friends.

If you think that article implies that ALL drag and drop questions were removed from the tests you need to reread it.
The fact that you are not prepared is manifest from the question that you ask and the lack of preparation that you showed by not having reviewed the official information that was available.
As has been frequently stated in the past Oracle is always free to include or exclude ANY topic from ANY exam at ANY time without prior notice. Exam takers are expected to have knowledge in ALL of the fundamental areas of their topic.
Most people preparing for an exam would take one of the many preparatory courses and trial exams that are available.
The fact that you have not indicated that you have done ANY of that is what indicates your lack of preparation.
Attempting to 'shoot the messenger' might make you feel better but it won't overcome your lack of preparation.

Adobe Presenter 10 Drag and Drop questions - only grey box when trying to create

Hi,
I try to create drag and drop questions in Presenter 10 and after clicking on Add Question -> Drag Drop, the new window opens but where I should be able to define the questions etc, the screen is just grey. Have the same issue on three other systems as well.
Flash is updated to latest version and so is Presenter 10.
Weirdly the installed Flash version is 15, but a right-click into the grey box shows me version 11.
Any ideas?
Thanks,
Chris

Just in case someone else has the same problem, a chat with Adobe brought the solution:
On the gray screen, Right click and go to Global settings
Go to advanced tab
Scroll down and click "Trusted location settings"
On the "Trusted location settings" window, click "add" on the bottom
Click "Add Folder" and select "Local disk c"
Click "Ok" and Confirm on "Trusted location settings" window
Worked for me (on three different machines) like a charm!

When I clicked on the Newest version of itunes something happened and now when I try to access the itunes store I get an error (-32-12) and it says to check my conectivity. I have three ipods and the problem is with the on line connection with itunes.

After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.

... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Drag line/connect question

Similar Messages

Maybe you are looking for