Drag&Relate in EP6 SP2

Hi all,
I am looking for information about how to enable Drag&Relate iViews in EP6. I am wondering if there is some step by step hands-on document available for this?
I saw that in EP5 a unification server was required to enable Drag&Relate. What about in EP6? Can I drag an object from an iView and drag it again onto another one as Input?
Any hints are welcome!
Thanks and Best Regards!
L.Liu

That's a bit misleading. For EP6 on less than the NW04 release, Unification still requires the separate unification server and ss basically Unifier5.0 based. With NW04, unification will be incorporated into the architecture (ie. no longer a separate server(s)). I am in EP6 cert. class right now and the instructor just covered this. He was in class last week for the new NW stuff and this was covered but was still even in beginning stages (ie. no working example in class). Hope this helps.
CS

Similar Messages

  • Define main objects for Drag & Relate between BW 3.1 and EP6

    hi all.
    We are trying to implement Drag & Relate between BW 3.1 and EP6.
    We have 2 different BW reports based on the same object "0MATERIAL". One of them should be a source and the other is the target. When creating the iViews for these reports the "main object" property has no values, therefor we don't see any symbol near the object we want to drag. The import of the "0MATERIAL" object from BW to the portal was successful.
    Is it related to customizing the BW system or the portal?
    thanks,
    Sagi

    I solved the problem - I added the BW alias before the main object name in the main object property. For example "BW.0MATERIAL" when BW is the BW system alias and 0MATERIAL is the object name.
    Sagi

  • Portal Runtime error during 1, 2, 3 Drag & Relate?

    Hi,
    I have successfully install SR1 version of the EP6.  I am attempting to complete the "1, 2, 3 Drag&Relate" weblog.  During one of the steps you have to go to User Administration > User Mapping to set the Everyone group user mapping.
    I am using sa id and the password I set during my SQL installation.
    As I click save button after entering the input I get this error:
    Portal Runtime Error
    An exception occurred while processing a request for:
    iView:
    pcd:portal_content/administratrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
    Component Name: com.sap.portal.usermanagement.admin.UserMappingAdmin
    User Mapping not fully available..
    Exception id: 2:07_11/01/2005_0001_4582650
    See the details for the exception ID in the log file.
    Any ideas why this error is occuring?
    Thanks,
    Jin Bae

    Hi Jin,
    I think SAP note number 796540 will be helpfull to you.
    It was known User Management issue which is not connected to any Unification feature.
    Personal advice: try to restart Portal server.
    Regards,
    Julia

  • Como alterar o título dos menus Drag & Relate? (Urgente)

    Prezados,
    Alguém poderia me auxiliar se é possível ou não alterar o título das linhas do menu Drag & Relate?
    Uma vez que eles não são tratados como Menu, ou sejam, não possuem um MenuID, para fazer a alteração como a de um menu padrão.
    Alguém já passou por esta situação, que poderia me auxiliar?
    Agradeço,
    Francislaine M. Souza

    Francislaine,
    Depois de muito tentar posso te assegurar que até o PL 36, não existem funcionalidades para isto.
    Marcus

  • SAP B1 Drag & Relate causes DMP Error

    SBO Version: 8.82 PL09
    Forum,
    We have noticed for windows 7 / windows 8.1 machines that when we come to use the 'Drag & Relate' facility, it is causing those SAP clients to crash with the following error:
    I have found on this forum a thread which indicates this may be a bug, fixed in 8.82 PL10. Is anyone able to provide me with the SAP Note number?
    Thanks,
    Sarah

    Hi,
    Please attach found thread here to check. Also check SAP note:
    1755387 - Overview Note for SAP Business One 8.82 PL09
    Thanks & Regards,
    Nagarajan

  • License in Failover/Backup Portal - Ep6 SP2

    Hello,
    We run EP6 SP2 and we copy the database and portal server file system to different hardware as a diaster recovery method.  We we bring up the portal on this new server it loads fine, but it says that it is not licensed since the Hardware key is different. 
    Does anyone know if I can import a license on the current server with the hardware key of the DR Server so that it will be licensed when you start it?
    Any ideas / suggestions?
    Thanks,
    Keith

    Keith,
    Kindly check note 181543 (License key for high-availability environment).
    Regards,
    James

  • Incorrect access restriction in Drag & Relate

    Hi,
    I am encountering an access issue in Drag & Relate function. I have created two numbering series for Purchase Orders. PO and YPO. "User 1" can access the Purchase Orders with the series PO and "User 2" can access the ones with "YPO". I have set the authorisations for Series for the mentioned users.
    When "User 1" tries to view the Purchase Order for an item in Drag & Relate, the system displays the list of Purchase Orders for this item regardless of the Series. If the "User 1" tries to drill down the Purchase Orders with series "YPO", the system correctly blocked the user from accessing the details as he has no rights to view the series "YPO".
    However, if there is one Purchase Order for the searched item, in Drag & Relate the system does not block the user to drill down and view the details.
    How can I restrict access if there is one Purchase Order for an item and user is not supposed to see the mentioned Series?
    Thank you.
    Regards,
    Yadana

    Hi Yadana,
    You may refer to the following thread first:
    Re: Data Ownership
    Hope this helps
    Kind Regards
    Victor

  • Drag&Relate with error 'no matching records found'  when adding UDF columns

    in SBO 2007A I added a large amount of UDF fields to marketing documents title section. Then I tried Drag&Relate, as result i got only the error 'no matching record found ....'.
    I removed some of the UDF Fields and Drag&Relate works correct. It seems to be a length problem of the table row. But I have no information about such a restriction and the error message dont say anything about length problem.
    Does anybody know about this behavior and the maximum length of table rows, or is there any other solution to fix this problem?

    Hello,
    there are approximatly 170 fields and most of them are alphanumeric (internaly nvarchar(max)) - when i remove 2 fields it works.
    Best regards
    Klaus
    Edited by: Klaus Steinkellner on Jan 13, 2011 4:27 PM

  • Item Filter in Drag & Relate menu is case sensitive

    Hi All,
    I'm  trying to do Filter Table in Drag & Relate - Sales Order Details with this criteria Item Description contains = 'color', the filtering did not give me any record. Instead i must key-in 'COLOR' in big caps. Does anyone try this? Thanks
    rgds,
    vin

    Hi Melvin,
    The way drag and relate works is as follows:
    1.You click on Drag and Relate.
    2. You can click on say Sales -A/R to expand its submenu items
    3. You double click on say Sales Order, it opens up all the sales orders for all the customers. You can close this if you want now.
    4. You now have to open something else, suppose you want to find out all sales orders for a busines partner then you click on open BP either through modules tab or drag&Relate tab. Your choice.
    5. Place your curser on BP code and press and hold left mouse button. Now drag that code and drop it on the SaleOrders submenu within Sales-A/R of DragAndRelate.
    Result Voila, you got your sales orders for that BP (Customer).
    The way you are using does not seem right. You can not arbitarily drag and drop everything and anything. You can drag and drop BP Code, Item Code etc.

  • Enhancements made in EP6 SP2 patches 28 & 29.

    What are the enhancements made in EP6 SP2 patches 28 & 29.
    What I mean to say is that what are the new features added in Patches 28 & 29. here I exclude Bug fixes.
    I can go to the central note for patch 28 : 793582 and can get a list of notes which indicate bug fixes done in Patch 28
    Similar way,  I can go to the central note for patch 29 : 803871 and can get a list of notes which indicate bug fixes done in Patch 29
    What I am really concerned is regarding new features added in these two patches (Patch 28 & 29) separately.
    Are there any new features added in these two Patch releases. If yes, Where are they documented.
    Are they documented separately or their respective guides are updated.
    Your help is really appreciated.

    Hi Robert, hi Suneel,
    > Patch 28 & 29 are not listed there yet.
    Not quite right, Robert, I don't know what a dreadfully old version you have looked on... It is listed, but it is explicitely said that both patches, 28 & 29, have
    "no new features or enhancements to existing functionality. It is cumulative as of Patch 5. Please refer to Patch 5 and Patch 27 documentation for information about previous enhancements."
    The document is retrievable without access to service.sap.com: http://help.sap.com/download/documentation/netweaver/ep/FeaturesEP6SP2Patches_v2.5.pdf
    It's a pity that SAP publishes the version name within the link, so if a new version exists, one has to know (or to look via service.sap.com).
    Hope it helps
    Detlev
    PS: Suneel, please consider rewarding points for people like Robert Thanks in advance

  • Integrate CRM 4.0 and EP6 SP2

    Hi,
    Can anyone let me know the steps to integrate CRM 4.0 with EP6 SP2 on windows 2003 server.
      Thanks in advance,
    regards,
    Payal

    Payal,
    There is excellant documentation available at SAP Help site on this. Here is the top level link for SSO
    http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
    and here is a link to most common scenario
    http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8e7af2f11d5993700508b6b8b11/content.htm
    Antoher thing it would be good to have access to BASIS skills while doing SSO to SAP Systems.
    Cheers
    Pankaj

  • Drag&Relate in SAP Portal 7.0

    Hello experts,
    I have a problem in SAP EP 7.0. I need to use Drag&Relate technology but in this version is not possible because this functionality is discontinued. The reason is that there is a technical reengineering of the Distributed Query Engine (DQE) technology.
    But, what can I do? Is there any way to reproduce similar functionality?
    Thanks in advance,
    Belen

    Hi there Belen,
    I have the same problem, only that I am using EP 6.0 SP16. The DQE doesnt start because of the "Technical reengineering" and there are a number of related functions that are not available in the portal..
    For example, I am not able to add Drag and Relate targets to iViews, there is no option for adding it in the detailed Navigation. There is also no Unification section in System Administration. I am really frustrated about it..
    Have you found out anything regarding Drag and Relate technology and if it will be continued again in the future? Do let me know if you have found anything regarding it.
    Thanks,
    Sameer

  • Drag & relate problem in Query Iview

    Hi,
    I just trying the weblog
    1-2-3 Drag&Relate (or D&R for dummies)
    So all the steps mentioned in that i have followed properly but in Content Admin --> unification under Business Objects i do get sales and stores and i define them according to weblog as source and destination but under edit mode Relation Type is Empty which i think should be manual or something and all the other things are same as shown is screen-shot of the weblog and also in the enduser screen i get message
    <b>Query execution failed. Exception message: Error trying to execute a query statement against MetaMatrix: Error trying to establish connection to the EIS : null</b>
    So i have no clue what could be possible problem
    Kindly Help
    Regards,
    Ricky

    Hi shivasankaran ,
    we also face this problem some times. at this particular issue...
    we should make report 4r month  wise only y because our excel sheet contains 65000 lines limit if ur drilling down more fields
    from free characterisitc. it cant display.
    IF ur case is mandetory to drag 2moths r 3months. just try to reduce drill down fields (r) if this also mandetory, use 2010 microsoft sheet 4r reporting this can use up to 1lac line.
    if this also not working. just do this, let me give one example if we r drilling down material & customers 4r   3-4months. one customer can buy N number of material so it will eceeds. just see wht ur  drilling down first material (r) customer. if first material & customer this is not working, drill customer & material.
    think this will help, any way let me know wht happen.
    Regard's
    venky

  • Repointing "Help" link to a different source in EP6 SP2

    Hi all,
    I am using EP6 SP2 Patch 4 HF 7. I need to re-point the "Help" link in the top of EP6 SP2 to an different source. Presently it is pointing to http://help.sap.com and since mine is an intranet portal..cannot point to that.
    Any idea where do I have to change the link ?
    Regards,
    Rajan.K

    Hi!
    You can customize this link by editing:
    Content Administration - Portal Content - Portal Content - Portal Users - Standart Portal Users - Default Framework Page.
    In popup menu choose "Edit". Select "Masthead iView" and press "Edit" link. Then in "Property Category" choose "Navigation" and in "Help Link URL" enter link you preffer.
    WBR, Lnk.

  • Error in DB migration : EP6 SP2 NW SR1.

    Hello All,
    I am doing migration from EP6 SP2 > NW SR1.
    While doing the DB migration on the Target server, I encountered the below error:
    ============================================================
    1118066281203#INFO.- Reports button clicked at MainMigrationFrame
    1118066281203#INFO.- SAP System Name is SR1
    1118066281203#INFO.- using tool version 0409.0.20050405174947.0000/877
    1118066281203#INFO.- using system installation at d:\usr\sap\SR1
    1118066281218#INFO.- Processing migration info
    1118066309031#INFO.- Processing migration info finished
    1118066315531#INFO.- ETC Migration button clicked at MainMigrationFrame
    1118066318062#INFO.- DBMigration button clicked at MainMigrationFrame
    1118066327500#INFO.- starting db migration run ...
    1118066327500#INFO.- jdbc driver: com.sap.portals.jdbc.sqlserver.SQLServerDriver
    1118066327515#INFO.- jdbc driver url: jdbc:sap:sqlserver://10.34.137.16:1433;MaxPooledStatements=100;DatabaseName=WCM;SelectMethod=cursor;longDataCacheSize=524288
    1118066327515#INFO.- using database schema 'WCM' on host '10.34.137.16' at port '1433' with user 'SAPWCM' as the database source
    1118066343546#INFO.- retrieved drv name: SQLServer (version: 3.2.006922003414004423)
    1118066343578#INFO.- MSSQL lock timeout adjusted
    1118066343609#INFO.- src cur ver: SP2.CM.1
    1118066343609#INFO.- src db version is SP2.CM.1 (17 patches newer than SP2CP.UWL.1)
    1118066343609#INFO.- running EP6SP2 -> NW04 migration
    1118066343625#INFO.- starting backup of configuration ...
    1118066347203#ERROR.- null - ConfigException: error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
         Inner exception is:
         A problem occurred while exporting the configuration: java.lang.NullPointerException
    stack:
         error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
         Inner Stack is:
         java.lang.Exception: A problem occurred while exporting the configuration: java.lang.NullPointerException
              at com.sap.netweaver.config.offlinetool.ConfigurationCmsTool.exportConfiguration(ConfigurationCmsTool.java:111)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              at java.lang.reflect.Method.invoke(Method.java:324)
              at com.sap.netweaver.bc.migration.ui.Migrator.backupCfg(Migrator.java:186)
              at com.sap.netweaver.bc.migration.ui.Migrator.run(Migrator.java:414)
    1118066347203#ERROR.- no valid configuration backup - rejecting db migration
    =====================================================
    Any help is highly appreciated.
    Warm Regards
    Suneel Razdan

    Hello
    I have resolved it !!!
    That's usually caused by the database not containing a valid config framework tree. In all cases so far this happened as part of the user killing the java vm in a situation where one should have waited for the cancel button to return.
    I restored the target database with the backup
    taken before started the migration and rerun the tool on
    the target. You can continue to use the MigrationInput.zip file.
    Suneel

Maybe you are looking for

  • Import XML document in MS Access through Jsp

    Hai, Can any one please tell how to import/store XML document into database, I have tried a lot, but failed to get the result. So please can anyone send me the related code for storing the XML document into database. Thanking you in advance, Praveen

  • My Wishlist for Lifelog

    1. Ability to Export Data (pdf/excel/csv), any format; I may need to store/analyse gain insights/correlation to improve health and life from all this information. 2. In-built analysis and recommendation... ie running vs quality of sleep etc. 3. Would

  • "instance of" a class

    I'm writing a test program for our lab using LVOOP. All instruments are child classes of a general device.lvclass. I want to be able to save and load the specific system configuration (what instrument are used). In order to know which specific child

  • I received a gift card as a present but it is not activated. How do I fix this?

    .

  • H.264 problems...

    When I click file - share - select quicktime icon - select expert settings - followed by now saving where ever and making the "export" as "movie to quicktime movie" and "use" as "broadband - high" These settings make a not to compressed H.264 movie.