Drag & Relate Issue.

Hi All,
We are on EP 7.0 and SP13. Definately we are able to use drag and relate feature as from SP12.
I have imported BO ( BUS0008 PLANT, BUS 2004 PLANNED ORDER, KNA1 CUSTOMER)
2 Transaction ivew were created as of on bus2004 (order), kna1(cusomer)).
Unification relation is mannual (bus2004 as source) , (kan1 as target) , Alias_1.OBJECTKEY=Alias_2.OBJECTKEY
Problem is when i drag ORDER no from planned order iview to Customer (which is visible as target iview with green icon beside it) i get a message **** The following capability is not supported: Full Scan****
Has anyone faced this issue ? Any possible solution. Last quest when the system object to * SAP R/3* is defined do we need to aslo specify (Drag & relate SERVER) parameters ? If so wht will the paramters.
Already gone through blogs so any thing other than that will help.
Thanks in advance.
**RAJ**

In case it matters, we are on BW 3.5 SP 18 with SAP GUI 6.40 Patch 22.
I don't know how to change this globally, so I will have to leave that to other gurus...
To change this setting for a query, go to Query Designer and open the query. Click on the Query Properties button at the top of the screen, then choose the "Display" tab. At the bottom of the Display Options section at the top left is the "Display Drag&Relate Links" option. Make sure the checkbox for this option is not selected (unchecked).
Hope this helps...
Bob

Similar Messages

Incorrect access restriction in Drag & Relate

Hi,
I am encountering an access issue in Drag & Relate function. I have created two numbering series for Purchase Orders. PO and YPO. "User 1" can access the Purchase Orders with the series PO and "User 2" can access the ones with "YPO". I have set the authorisations for Series for the mentioned users.
When "User 1" tries to view the Purchase Order for an item in Drag & Relate, the system displays the list of Purchase Orders for this item regardless of the Series. If the "User 1" tries to drill down the Purchase Orders with series "YPO", the system correctly blocked the user from accessing the details as he has no rights to view the series "YPO".
However, if there is one Purchase Order for the searched item, in Drag & Relate the system does not block the user to drill down and view the details.
How can I restrict access if there is one Purchase Order for an item and user is not supposed to see the mentioned Series?
Thank you.
Regards,
Yadana

Hi Yadana,
You may refer to the following thread first:
Re: Data Ownership
Hope this helps
Kind Regards
Victor

Portal Runtime error during 1, 2, 3 Drag & Relate?

Hi,
I have successfully install SR1 version of the EP6. I am attempting to complete the "1, 2, 3 Drag&Relate" weblog. During one of the steps you have to go to User Administration > User Mapping to set the Everyone group user mapping.
I am using sa id and the password I set during my SQL installation.
As I click save button after entering the input I get this error:
Portal Runtime Error
An exception occurred while processing a request for:
iView:
pcd:portal_content/administratrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name: com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 2:07_11/01/2005_0001_4582650
See the details for the exception ID in the log file.
Any ideas why this error is occuring?
Thanks,
Jin Bae

Hi Jin,
I think SAP note number 796540 will be helpfull to you.
It was known User Management issue which is not connected to any Unification feature.
Personal advice: try to restart Portal server.
Regards,
Julia

Drag & relate problem in Query Iview

Hi,
I just trying the weblog
1-2-3 Drag&Relate (or D&R for dummies)
So all the steps mentioned in that i have followed properly but in Content Admin --> unification under Business Objects i do get sales and stores and i define them according to weblog as source and destination but under edit mode Relation Type is Empty which i think should be manual or something and all the other things are same as shown is screen-shot of the weblog and also in the enduser screen i get message
<b>Query execution failed. Exception message: Error trying to execute a query statement against MetaMatrix: Error trying to establish connection to the EIS : null</b>
So i have no clue what could be possible problem
Kindly Help
Regards,
Ricky

Hi shivasankaran ,
we also face this problem some times. at this particular issue...
we should make report 4r month wise only y because our excel sheet contains 65000 lines limit if ur drilling down more fields
from free characterisitc. it cant display.
IF ur case is mandetory to drag 2moths r 3months. just try to reduce drill down fields (r) if this also mandetory, use 2010 microsoft sheet 4r reporting this can use up to 1lac line.
if this also not working. just do this, let me give one example if we r drilling down material & customers 4r 3-4months. one customer can buy N number of material so it will eceeds. just see wht ur drilling down first material (r) customer. if first material & customer this is not working, drill customer & material.
think this will help, any way let me know wht happen.
Regard's
venky

20 inch Duo Safari scroll box drag related jumbled display rectangles

Hi,
I was an early poster regarding the speed bump issue.
There is a related issue I've seen infrequently, maybe a few
times a day.
I've found if I scroll in Safari by slowly dragging the scroll box,
I'll intermittently see a region of jumbled copy rectangles
below and to the right of where
the speed bump appears. I sometimes drag slowly because it
lessens the speed bump effect. As noted in other threads, using
the scroll button on my Mighty Mouse has neither of these problems,
though (to my eyes) the scrolling is not quite as smooth
as when I drag the scroll box.
Now the unfortunate thing about this case is that when you stop
scrolling the display remains jumbled/corrupted, unlike the speed
bump case. I tried to shoot a screen image of this via, ShiftOption4,
but as I dragged the mouse the highlighting of the region "fixed" the
display refresh.
Anyone else see this?

Nope. My iMac does not do that. Sorry to hear that you are having a problem . Did you try repairing permissions or running the Apple Hardware Test? This could tell you if it is a software or hardware problem.

Purpose of Drag&Relate in Portal

Hi Experts,
I am started learning with Drag&Relate, I noticed help.sap links. I didn't get clearly the purpose of Drag&Relate.
What is the purpose of Drag&Relate?
What is the Difference Between Related Links and Drag&Relate?
And Which ServicePack need to work Drag&Relate in EP7.
I am working in EP7 SP9, it is not showing Drag&Relate Option..
It's very urgent, Please guide me regarding this.
Thanks & Regards,
Art.

Hi,
For your issue this FORUm message will help
[Re: Install Unification Server in EP7;
and
[http://help.sap.com/saphelp_nw70/helpdata/en/9d/02b2b4de384af8ae759e55738296f7/frameset.htm]
Also know more about Drag & Relate from
[http://help.sap.com/saphelp_nw04/helpdata/en/38/0f3f28be7c5d47802f951c65d7a6f7/content.htm]
Related links are defined as "Links that access information which is topically related to the content currently displayed in the portal content area." they Helps users to quickly find information relevant to the context in which they are working.Automatically appears when the portal object they are linked to is part of a portal page.
Working in the Related Links Editor of the Portal Content Studio, the content manager can assign iViews and pages as related links to other iViews or portal pages. At runtime, the related links of all the visible iViews and pages in the content area, are accumulated and inserted into the Related Links iView of the navigation panel. The end user can click these links to pursue a specific topic
Whereas in case of Drag & Relate , relationships between iViews is based on Business objects.
Using Drag&Relate, iViews can be started from other iViews. The iViews are related to another with Business Objects. In a Drag&Relate operation, a Business Object is transferred from one iView (Drag&Relate Source) to another iView (Drag&Relate Target) as a parameter. Transfer and starting of the iView is done using by dragging the specified DRAG symbol with the mouse.
A Drag&Relate Source is an iView that contains Business Objects. Drag&Relate compatible Business Objects are designated with the symbol . In SAP BW, Business Objects correspond to InfoObjects of type Characteristic. With a Drag&Relate operation, the characteristic, a characteristic value and the logical system are transferred. When you only click on the DRAG symbol in a BEx Web Application without dragging it to another iView, the master data with attributes from the InfoObject Characteristic are displayed.
[http://help.sap.com/saphelp_nw04/helpdata/en/49/27e6418b7eca17e10000000a155106/content.htm]
Reward points if helpful.
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 4, 2008 11:12 AM
Edited by: Shailesh Kumar Nagar on Jan 4, 2008 11:36 AM

Como alterar o título dos menus Drag & Relate? (Urgente)

Prezados,
Alguém poderia me auxiliar se é possível ou não alterar o título das linhas do menu Drag & Relate?
Uma vez que eles não são tratados como Menu, ou sejam, não possuem um MenuID, para fazer a alteração como a de um menu padrão.
Alguém já passou por esta situação, que poderia me auxiliar?
Agradeço,
Francislaine M. Souza

Francislaine,
Depois de muito tentar posso te assegurar que até o PL 36, não existem funcionalidades para isto.
Marcus

Can we set up a forum for Security related issues?

I know many of us think security is a Windows related issue, but from time to time there are security issues that may come up. I had a question so I looked and couldn't find a forum, so I posted in one of the OS X 10.6 sub forums.
Thanks!

I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
I am not aware of any other forums that deal with OS X security issues
exclusively, so this forum could be a good place to bookmark and visit from time to time.

To everyone with IOS6 Sound related issues & Others

If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
I am on the phone with apple care now. They seem to not be aware of the problem at all.
While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

Many Sporadic Preview Related Issues

Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
Preview panel "preview" freezes indefinitely.
App very slow to load while creating new previews. (previews take forever to create and update)
Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
The official forum for reporting bugs and making feature requests is at the web link below.
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

SAP B1 Drag & Relate causes DMP Error

SBO Version: 8.82 PL09
Forum,
We have noticed for windows 7 / windows 8.1 machines that when we come to use the 'Drag & Relate' facility, it is causing those SAP clients to crash with the following error:
I have found on this forum a thread which indicates this may be a bug, fixed in 8.82 PL10. Is anyone able to provide me with the SAP Note number?
Thanks,
Sarah

Hi,
Please attach found thread here to check. Also check SAP note:
1755387 - Overview Note for SAP Business One 8.82 PL09
Thanks & Regards,
Nagarajan

Unicode related issue in 4.6c to ECC 6.0 upgrade

Hi
I am doing upgrade from 4.6c to ECC 6.
Here I am getting one unicode related issue.
"The data object A948 does not have a component called ZZMATWA.".
This type of issues , how can I resolve.
I am very new to upgrade, Plese do help me.
Regards
Sandeep Reddy.

Hi,
Can you give the error what you are coming across.
Regards,
Suhas

Drag&Relate with error 'no matching records found' when adding UDF columns

in SBO 2007A I added a large amount of UDF fields to marketing documents title section. Then I tried Drag&Relate, as result i got only the error 'no matching record found ....'.
I removed some of the UDF Fields and Drag&Relate works correct. It seems to be a length problem of the table row. But I have no information about such a restriction and the error message dont say anything about length problem.
Does anybody know about this behavior and the maximum length of table rows, or is there any other solution to fix this problem?

Hello,
there are approximatly 170 fields and most of them are alphanumeric (internaly nvarchar(max)) - when i remove 2 fields it works.
Best regards
Klaus
Edited by: Klaus Steinkellner on Jan 13, 2011 4:27 PM

Item Filter in Drag & Relate menu is case sensitive

Hi All,
I'm trying to do Filter Table in Drag & Relate - Sales Order Details with this criteria Item Description contains = 'color', the filtering did not give me any record. Instead i must key-in 'COLOR' in big caps. Does anyone try this? Thanks
rgds,
vin

Hi Melvin,
The way drag and relate works is as follows:
1.You click on Drag and Relate.
2. You can click on say Sales -A/R to expand its submenu items
3. You double click on say Sales Order, it opens up all the sales orders for all the customers. You can close this if you want now.
4. You now have to open something else, suppose you want to find out all sales orders for a busines partner then you click on open BP either through modules tab or drag&Relate tab. Your choice.
5. Place your curser on BP code and press and hold left mouse button. Now drag that code and drop it on the SaleOrders submenu within Sales-A/R of DragAndRelate.
Result Voila, you got your sales orders for that BP (Customer).
The way you are using does not seem right. You can not arbitarily drag and drop everything and anything. You can drag and drop BP Code, Item Code etc.

How to add data in related issue field in issue tracking list sharepoint 2013

Hi,
I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Drag & Relate Issue.

Similar Messages

Maybe you are looking for