Drag Select Inside Points With The Direct Selection Tool While Above An Object?

I'm trying to modify a path in InDesign CS5 (Fig. 2), as it is now I have to select each point individually. Becasue while you're zoomed in (Fig. 1), you can't drag and select the points. When you attempt to do that, you end up dragging the whole image.
Is there a way to drag select inside points with the direct selection tool while your directly above the image with the paths you want to select?
Fig. 1
Fig. 2

FAIL #1:
No. When you copy paste the Cliiping Path [NOT the frame] into Illustrator, then alter the path and paste back into Indesign, it pastes it back as a FRAME, NOT a CLIPPING PATH.
FAIL #2:
Why do people comment on this stuff without first testing what they are suggesting?
What you suggested doesn't work or even make sense.
Apprently in InDesign, you can't have a CLIPPING PATH without an IMAGE there to begin with. When a FRAME OBJECT contains an IMAGE the option to convert the object to an UNNASSIGNED OBJECT is greyed-out, as in UNSELECTABLE, as in NOT POSSIBLE, which is another way of saying IMPOSSIBLE, which in most circles pertains to MAJOR FAILAGE.
When you CUT [hold command then press X] the CLIPPING PATH, from the FRAME/OBJECT you can then unassign the object, but when you paste the CLIPPING PATH back in, it invariably pastes the IMAGE along with the CLIPPING PATH, and once again the UNASSIGNED OBJECT is simply an ordinary frame with an image, and thus NO LONGER AN UNASSIGNED FRAME.
People like you make life harder dude, seriously.
Again, like some of the folks above, you're confusing a FRAME PATH [that you can alter and create with the pen tool as well] with a CLIPPING PATH. They are NOT the same thing.
Know the difference between the two before you feel inclined to respond.
My kingdom for someone out there with some merit and sense of accountability.
It's like, where do you people work? Are you serious? SMH.

Similar Messages

How do I constrain anchor angle when I tug on a path with the direct select tool?

How do I constrain anchor angle when I tug on a path with the direct select tool like it did in every version of Illustrator since 1988? New behavior is costing me time.

That solves it!
I was not able to find this in the online materials about the pen tool. In fact, Illustrator Help | Adjust path segments does not show the new functionality at all. They need to update that article.
Better way to implement the new functionality
It would have been nice if Adobe added to the chording controls for the direct select tool the ability to toggle this setting temporarily by holding down the space bar after mouse down to drag a segment.
Before mouse down this would give the user the hand tool.
If, after mouse down, I could hold space bar and have the behavior switch from the historical capability where dragging a segment cannot change adjacent segments to the new behavior where dragging the segment cannot move anchors but can rotate them, I am sure I would find times when the tool saved time. If, before mouse up, I release spacebar, turn the constraint back on with anchors pointing in their new directions and allow me to stretch the curve protecting the new shapes of adjacent curves.
Using space bar for this would be intuitive to me because holding down the space bar is something I already do to organically drag the page around with the hand tool. The new tool allows me to more organically stretch artwork around, something that is distantly analogous, but close enough to remember.
For long time Illustrator users, the chording features holding Ctrl/Alt/Shift/Space or Ctrl/Command/Shift/Space in different combinations while using the direct select tool and pen tool is the killer app part of Illustrator that keeps us using it. This what we did on Illustrator 88 on a Mac Plus in 1988 and is still the most productive way to produce vector art when precision is required.

Gradients gets cropped with the Direct selection tool

I discovered another strange thing with gradients in InDesign.
I could see this problem in both CS6 and CC.
1. Make a gradient fill and apply it to a square object
2. Use the Direct selection tool and select two corners
3. Move the corners and you will see the gradient fill being cropped away
4. Change to the Selection tool and make the object wider. It does not reveal any more colors. They are cropped away for good now.
According to the color palettes this is still a gradient fill but it looks like one color now more or less. I couldn't find any way to release the cropping. I suppose it would have to be reveresed with the Direct selection tool.
The gradients in Illustrator stay inside the object when using the Direct selection so both selection tools works the same way. I also tried with vector objects in Photoshop and the gradient fill effect. Both selection tools in Photoshop works the same way as Illustrator. Gradient stays inside the object.
So is it a bug or feature?

Adobe has provided a very large tool box. Why not just do this in
Illustrator and place or copy/paste the frame. You obviously don't like
InDesign's way of doing things and you have at your disposal a tool that
does work the way you like.
I like InDesigns way of doing things very much. It's easily my all time favorite software after 25 years in this business.
And I can understand different behavior between the Adobe apps. This app can only do a little bit of what the other app can do.
But it don't like when three apps have the exact same tools, and one app is programmed to do something else with these tools, when it just as easily could have been programmed to do the same thing.

Please fix the direct selection tool that you broke

When you create a curved path with at least four anchor points that is not a complete circuit, clicking on that path with the direct selection tool only selects a portion of the path, whereas before, it would select the entire path. This odd new behavior, whether intentional or not, is a result of the new Path Segment Reshaping functionality.
The problem is, it is very annoying to have only a portion of the path selected because it makes it look like the path is non-contiguous. (Selecting with the regular selection tool isn’t necessarily a solution if your paths are grouped, since it will always select the entire group, and not just the one path you’re interested in.)
This does not happen with closed paths, and it does not impede the Path Segment Reshaping functionality at all. Therefore, there is no reason why open paths shouldn’t/couldn’t behave the same way — the way they previously did before this update.

Thanks for thoroughly explaining the problem. I can reproduce the issue. I blamed it on improper screen redraw. I've noticed other screen redraw issues in 17.1.

Script for Always Calling the Direct Selection Tool?

Ok, so first forgive me if this isn't necessarily a scripting question, but I'm hoping it is...
Would it be possible to write a script that, while using the pen tool, would force Illustrator to always switch to the Direct Selection (white) arrow when holding down Ctrl (Cmd)? In my workflow, I never have use for accessing the regular Selection Tool while I'm using the pen tool (or very rarely). In essence, I would just love if Illy's pen tool behaved the same as InDesign's and Photoshop's! Anyone know if something like this is scriptable?
Thanks in advance!
Andy

Google "illustrator pen tool direct selection" , for example the following...
http://vector.tutsplus.com/tutorials/tools-tips/illustrators-pen-tool-the-comprehensive-gu ide/
Select the Direct Selection tool before selecting the Pen tool. Press and hold Command (Ctrl)
to give you access to the last tool selected (in this case the Direct Selection tool) for editing
of paths and handles without deselecting the path.
Is that what you mean?

Help! I can't delete anchor points with the Delete Anchor Point Tool

I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
Any ideas what's going wrong here?

Another thought. If there are multiple nodes in that one spot, you may have to use the remove anchor point repeatedly to get rid of them all. It looks like you deleted the point and nothing happens, but really you are just seeing another node that was very close to the one you just deleted.
If you select drag over them with the white arrow tool and choose remove anchor points it will remove them all at once.

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

Illustrator is snapping to point without the option selected.

Illustrator is snapping to point without the option selected. Anyone else noticing this and what is the solution. Yes I have restarted illustrator.

slange,
Then it may be time for the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

ID CS 3.0.1 (838) crashes every time I use the Direct Selection Tool

We have recently installed an upgrade to InDesign CS for being able to open documents generated by newer ID versions, thus turning the InDesign version into CS 3.0.1 (838).
Since then, every time we start to use the Direct Selection Tool (white arrow) the program crashes.
As this is a relatively old upgrade (2005), I was hoping to find the solution on the Internet but had no success.
Does anyone know what should we do to solve this problem?

Yes, I did. Even though we're in Brazil, we prefer to use the softwares in their native language (english) in order to get eventual updates more quickly. This also applies to the operational environment (Windows XP Professional - SP3, with the most recent updates installed)

To add new row with the checkbox selected ....

Hi All,
In my project I have to create a table with 2 columns, 1 column is checkbox and other column is String type. In the same JFrame one textarea and one add button should be there. When we type text in the textarea and click add button, it should add a new row in the table with the checkbox selected and the 2nd column containing the text.
I want to use AbstractTableModel.
Please help me to solve this issue. If you have sample code that will be more helpful.
Thank you,
Regards,
mkumar

It would be better if you extend from DefaultTableModel rather than from Abstract Table Model. That is because DefaultTableModel provides functionality to add a row. In fact, you can directly use DefaultTableModel .
In the button's action performed,
public void actionPerformed(ActionEvent e)
if(e.getSource() == bAdd)
    Vector newRow = new Vector(2);
    newRow.add(new Boolean(Boolean.TRUE));
    newRow.add(" ");
    DefaultTableModel dm = (DefaultTableModel)yourTable.getModel();
    dm.addRow(newRow);
}Note : For the above code, Initialize the JTable with a DefaultTableModel parameter than directly with Vectors/ Arrays.
This is because when we try to cast from TableModel to DefaultTableModel as in the above code, there is a possibility of an
Exception if the Table is not initialized without a model.
For the CheckBox in the first column, you need to set an editor and a renderer so that you can manipulate and see your boolean values as the state of the check boxes.
JCheckBox b = new JCheckBox();
DefaultTableCellRenderer dr = new DefaultTableCellRenderer(b);
DefaultTableCellEditor de = new DefaultTableCellEditor(b);
yourTable.getColumnModel().getColumn(0).setCellEditor(de);
yourTable.getColumnModel().getColumn(0).setCellRenderer(dr);That should do it !
Cheers

If I select multiple images to apply a change to all Aperture it does so only with the first selected. Why?

If I select multiple images to apply a change to all openings it does so only with the first selected. Why?

You probably have Primary Selection only on.
Aperture identifies the images you’ve selected by displaying them with a white border. When you select a group of images, the actively selected image, called the primary selection, appears with a thick white border and the rest of the selected images appear with thin white borders.
Primary Only button: Click this button to make changes to the primary image selection only.

SELECT FOR UPDATE with the SKIP LOCK clause

Hi,
I have a query regarding the SELECT FOR UPDATE with the SKIP LOCK clause.
Whether this will be really good for parallel processing.
Also if we are selecting a set of records in a cursor whether the lock will be done at the records level once we fetch the records?
Also do we have any known issues with this one?
We are trying to figure out whether this will fit for business requirement, we are trying to do a implement a threading kind of thing for our stored procedure invocation in background using shell script.
Any suggestion or feedback on this will be helpful for us.
Thanks a lot for the support given....
Regards,
Basil Abraham.

http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html
Please read the above thread for few information...Thanks!

Cannot find the Quick Selection Tool (previously paired with the magic wand tool) on Illustrator CC (newest version installed on October 14, 2014)

I have just installed a new version of Illustrator CC and CS6 on October 14, 2014 and I couldn't find the Quick Selection Tool on this version, previously this tool is located with the magic wand tool

I don't remember a quick selection tool in Illustrator. Are you sure this was in Illustrator?

Why can't I move artwork with the perspective selection tool?

I created a carpet and decorated it with symbols. When I tried to place it in the perspective grid with the perspective tool, it wouldn't move. I can move it fine with the selection tool and there's a bounding box but nothing happens when I use the perspective selection tool.
Need help. Thanks.

You have to make sure that one of the grids (Left, Right, Horizontal) is active.
Just check the widget that appears when you select the Perspective Grid Tool. You can click on those sides of the cube with the Perspective Grid or the Perspective Selection Tool to make one of them active. You can also press the key 1, 2 or 3 to make either of those grids active.
If you click on the circular portion outside the cube, none of the grids is active. Then you can't move the artwork with the Perspective Selection Tool. You can press the key 4 to make none of the grids active which is especially useful when you don't want your artwork to distort in perspective while still working with the Perspective Grid showing on the artboard.

J1INUT Error - No data exist for processing with the given selection option

Hi Guru's,
I am using transaction J1INUT utilization of provision of TDS on Services for which in have made the provision with the help of J1INPR, But when I am executing J1INUT transaction .The following error message is displaying:
No data exist for processing with the given selection options
I have followed the below steps.
1) ME21N - OP Creation
2) ML81N - Service Entry
3) J1INPR - Provision of TDS
4) MIRO - Invoice Posting
I have checked the Table J_1IEWTPROV In that system is updating the table also. Even I have activated table TRWCA for field IND
But still I am getting the same error. Any suggestions to resolve this.
Appreciate your inputs. Thanks in Advance
Regards,
DeepaK

Hi Deepak,
Refer the below link and follow the steps - Provision for Taxes on Service Recieved.
Re: Provision for Taxes on Service Recieved
Hope it may useful to you.
Regards,
Govind Bhaskaran

Drag Select Inside Points With The Direct Selection Tool While Above An Object?

Similar Messages

Maybe you are looking for