Dragged Regions in Main Window Yank Leftward

I"m finding that when I drag a region down or up from track to track in the Main window of Logic Pro , the region yanks off to the left of its grid line slightly instead of going straight down. I have both Limit Dragging preference checkboxes checked, so this shouldn't be happening.
It's a workflow-killer, since if I'm dragging MIDI regions around, the back of the previous region gets chopped off, and for every drag I have to very slowly and carefully drag the region I'm moving back to the right to its grid line or the content in the dragged region is (obviously) out of sync. This happens at all maginfications, AFAIK.
Any ideas?

Just solved my own problem. Smart snap was on, though I wonder how smart it really is. I set snap to Bar, and I'm all good again. I have to dig into the snap options some more in the documentation. With great power comes...

Similar Messages

How can I make a movable transparent main window (HTML, not FLEX)?

Hi all-
I'm new to AIR and coming up to speed quickly. I got a sample application up and running right away and was able to give it a transparent main window so that the corners are rounded and there is no window title bar.
However, I can't figure out how to make it so the user can drag the application around their desktop when they click on it.
I've seen a few FLEX examples of this but I have to work in HTML.
Does anyone know how to set this up in HTML?
Thanks,
Nicholas

"Works pretty much as I'd expect, except clicking and dragging one of the child controls in my window (e.g. a button) moves the whole window as well."
Most user interface events (mouse up, down, etc.) "bubble" up from child elements to their parents. Since you are listening on the body element, your handler is called for every mouse down in the page since the body is the highest parent in the document.
You can either:
Attach the event listener directly to the element used to drag the window.
Check the event target property to check whether the target of the event (the element moused) is a drag control.

T-Bird keeps automatically switching from composition window to main window while I am typing, which leads to typed letters being interpreted as hotkey commands

Hi,
Since I switched to Windows 8, I've had this problem with T-Bird. Updates and safe mode have not fixed it.
Basically, while I am composing a mail, t-bird automatically switches to the main window. Because I am in the middle of typing, it usually freezes for a moment, sometimes longer and goes transparent and a (Not Responding) appears, but usually unfreezes and then interprets all the intervening keystrokes as commands. All sorts of damage is done: messages deleted, threads hidden, sometimes a "go to last unread message" box appears. It's a real drag.
I thought it might be a keystroke combination that is making the program change windows, but I'm fairly sure I've seen it switch when I just have the composition window idly open. I think it may be switching whenever T-bird checks for new mail.
One thing to mention: I often switch between US English keyboard layout and Portuguese language layout. I haven't systematically tested whether it happens in one or the other, but the POR layout has some accent marks here and there. still, I've been careful not to accidentally touch the CNTRL key and as I say, I've seen it switching while idle.
Any help is appreciated. It's getting to the point where I can't really use T-Bird any more and am sadly looking for alternatives.
Thanks,
BL

Create a new profile as a test to check if your current profile is causing the problems.
*https://support.mozilla.org/en-US/kb/profiles-tb
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
*http://kb.mozillazine.org/Profile_Manager

Unable to print main window and associated secondary windows in next page

Hi All,
iam print line items values in first page by using main window (table) and associated terms &condition in second window(template).
But i want terms & condition to printed in other page.I tried to create COMMAND to manually trigger second page but it doest work.
Kindly suggest.
Attached is snap shot of current output(Shaded region are space of dat window).Also attached is overlapping of main and secondary windows.
Since i need to increase the above template sizes i shifted main window and other 2 secondary window downwards so i wanted them to print in next page.

Hi abhijeet,
Add Programming lines before Command before loop statement,
In that Count the itab using describe table.
Add condition if count EQ Sy-tabix.
pass to command line.
Try this,
Regards,
Venkat.

Problem in printing main window

Hi all
i have to print first four coloums with multiple records and fifth coloumn with data shown below ,how can i print this
i have to display like this(ABCDE are my five coloumns)under coloumn E , i have to display text and values like shown,and first four coloumns are like shown.and heading for coloumn e is not required.i have to print this in main window.
A-B-C--D----E
1-1-11----point of departure = india
2-22-2----
point of arrival-US
3-3-3--3--
truck number=3442
4-444---
5---55-5----
6--6-6-6---

Hi gopaludu,
Create the table in that draw the cells for the 5 columns.
In table --> Header area : Declare the fields for all 5 fields.
Main area : In the 5th columns drag and drop the
fields required.
Regards,
Sravamthi

Page Protection in Main window of smartform using Folder issue

Hi Experts,
We can fix the page protection issue of records in main window by checking the No Page Break check box at the line type level in a smartform.
I tried to solve this issue by using the folder option. I created a folder inside the table of a main window and checked the page protection check box. Save and activated the layout. When i tried to add the table to the folder, the check box for page protection was reset to blank.
Why does this happen? Cant we use page protection inside main window using folder ??
Thanks

Hi friend,
We can do page protection functionality inside table of main window using Folders option. Follow the below steps,
1. Assume rows are created inside table in a main window, with corresponding line types.
2. Create a folder named PROTECT inside table, for example in Main area of table.
3. Just drag and drop your Row(s) into folder PROTECT and simply click page protection check box of the folder PROTECT.
4. This will help you to add the required functionality using Folders option in smartform.
Try this and update me in case of any concerns. Hope this will solve your problem.
Check the attachment also for your reference.
Cheers...

Main window data to be page protected in smartform

Hello Experts,
I want to make Main window data to be page protected.
But page Protection check box is in Noneditable mode .
Please let me know, how to make main window data to be page protected.
Regards
Mohit

Hi,
    Try this way
    Under the Main Table node, you will find, Header, Main Area and Footer.
    Select Main Area, right click Create> Folder
    Drag the Row item inside the Folder
    Select the Folder node, for Folder node out put options, you can select Page Protection check box.
Main Window
    Header
    Main Area
      Folder
        Row Items
    Footer
Regards
Bala Krishna

Safari main window not showing up in my user account when launched

Safari main window is not showing up when launched in my user account.
For some unknown reason, there must be a bug with Space and Safari as when I switch from Space 1 to Space 2 (and vice versa) I can see the Safari main window for less than 1 sec but could not fix it to show up and stay in the foreground in any of the 4 Spaces areas.
I have tried to desactivate Space or change some settings in Space but could not fix the issue.
Last but not least, Safari is working well for all other user accounts on my Mac.
I have updgraded my OS to 10.5.7 and Safari v4 last patch but I have the same issue for 1 month

HI and Welcome to Apple Discussions...
Try deleting this file. com.apple.safari.plist
/Users/YourName/Libary/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and restart your Mac. See if that helps...
Carolyn

AIR Drag and Drop between Windows

I cant seem to get a simple use case to work:
I have an AIR app that has two <mx:Window> built as separate MXML components, one is called DragSourceWindow the other DragTargetWindow. Inside the DragSourceWindow is a canvas that can be dragged out of the window and dropped into the DragTargetWindow.
Code:
Main AIR App: http://pastie.caboo.se/private/wxcsvvxglm7aabf3xqta
DragTargetWindow: http://pastie.caboo.se/private/ysgv3kpr6suiakutnvt4g
DragSourceWindow: http://pastie.caboo.se/private/yybaslwsfz12znygyjvva
SVN Repo: http://zclguialvgrid.googlecode.com/svn/trunk/examples/DragManagerIssue/
Inside each <mx:Window> are some trace messages to see what is going on:
   1. When a DragManager.isDragging is true
   2. When you drag into a drop target
   3. When you drop an item into a drop target
However, once you drop the canvas into a window and mouseover it again the DragManager still thinks a drag is active.
I am using the release versions of FB and AIR.
What am I doing wrong?

Nevermind, you can't use DragManager at all in AIR it seems if you leave a window. You have to directly use the NativeDragManager.
Strange because it seems like the DragManager singleton manages that for you -- but it doesn't.

How do i seperate media browser from main window in Pro X

How do i separate media browser from main window in Pro X, it only lets me drag project audio tab from main window..
Regards
James.

hello, this is usually caused by adware on your pc.
please run a scan of your system with [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & also manually check that you don't have any suspicious entries like 3rd-party-toolbars presently installed under ''firefox > addons > extensions'' (adware like babylon also might install some unwanted stuff that comes under the names "Browser Manager", "Browser Protector", "Bprotector", "Object Installer", etc.) or in the windows control panel > programs section.
afterwards install the search reset addon - it will revert the most common customziations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/
[[Remove a toolbar that has taken over your Firefox search or home page]]

Smartforms: Page break in main window

Hello all,
I am working on a smartform that has a loop in the Main window which finally shows a table with serveral rows. I would like to have a page break if one group of lines doesn't fit on the page anymore.
I did some research on that and found the following solution:
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page.
I did all this and activated the form. But when I go the generic output issue to see the form, following error message comes up:
Output could not be displayed (it may not be complete)
Any ideas why this is happening? (If I delete the folder with the "page protection" mark, then it is working fine again..)
Thanks a lot
Anne

Hey Anne,
If you are getting the error as soon as you check the box for page protection, it indicates that its not placed at correct position.
I think you placed the folder at a wrong node. I placed the folder under the main area of the table and placed the row types under the folder. Then i checked the folder for page protection.
Its working for me. I am working in ECC 6.0. I dont know if we have that provision in 4.6 C.
Create the folder under the main area of the table node.
put the row types under the folder and check the box for page protection.
Thanks,
Vamshi.
Edited by: vamshi p on Jan 31, 2008 9:19 PM

Trouble getting thumbnail to open fully in the main window for editing.

I updated to 6.0.6 iphoto and I can't find a way to have my thumbnails taking up the whole main window...not the full screen. Previously when I double clicked on a thumbnail the pic opened in main window, taking up all the space in that window. Now it is just a small pic in the main window and I can't see enough detail to edit the pic.

The files in the Data file are the thumbnails used by iPhoto. The ! you're getting is because iPhoto has lost the link between the library and the original files that will be in the Originals folder.
I don't think it will work but you can try to rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
If that doesn't work you'll have to start a new library and import the files in the Originals folder from the old library. Here's how:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the desktop into the open iPhoto window.
This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar crash all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Opening new Mail message in the main window

Hello,
When I get a new mail message notification banner in the right top corner of the screen and click on it, this message is opened in a popup window. I want it to be opened in the main window, like it does when you click on a message if you are already in the Mail app.
Is this possible? I can't find any option to change this in System Preferences or Mail settings.
Thanks!

If the Mail app is frozen then have you tried closing the app via the iPad's multitasking bar and seeing if it works properly when you re-open Mail ?
iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the Mail app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

ITunes 7 can't add artwork to multiple items in main window like iTunes 6

In iTunes 7 I can no longer add the same artwork to multiple items in the main window. For instance, I want the same cover art added to every track of a certain album. I select all the tracks, and the artwork window says "Drag Album Artwork Here", but when I do, nothing happens.
This used to work fine in iTunes 6. Is this a bug, a setting I am missing or something else? I know I can edit the artwork in the "Get Info" window but that's inconvenient when ripping a lot of CDs.
PowerMac Dual 1.42 GHz G4 Mac OS X (10.4.7)

Negative, Bill.
Even with "selected item" checked, it will not add artwork to multiple items. The method I am using is the method I have always used - highlight the whole album and drag a jpg from a web browser straight in. It makes a brief HD noise as if something is being accomplished, but the songs do not acquire any artwork.
However, if you only select one song, it will drag in seamlessly as always.

Mail main window appearance

When I use to go to my mail box and clicked on a message, it appeared in the bottom half of the main Mail window. However, that no longer happens, I now have to double click on a message and it appears as a separate window. I then have to close or delete the message to return to my mail box. How do I get back to the original setting with the message appearing at the bottom half of the main Mail window?

Greetings and welcome.
At the bottom of your main window, under where the list of e-mails is there is a bar. Double click it, or click and drag it up.
That will open the preview pane and let you read your e-mail there.
If you look carefully in the middle of it you can see a small dot.

Dragged Regions in Main Window Yank Leftward

Similar Messages

Maybe you are looking for