Dragging clips to bins is very slow in Premiere CS6

I just upgraded to Premiere CS6 from CS 5.5 (no thank you, CC) and have problems with very slow speed when dragging clips from one bin to another in the Project panel. Here are the specifics:
I have about 1500 clips in a bin that I'm sorting through in the Project panel, putting clips into other bins as I classify them. If I have the 1500 clips sorted by the Name field, there's no delay as I move a clip or clips from the big bin to one of the smaller bins. If, however, I sort the 1500 clips by Media File Path in the Project panel (which puts the clips in chronological order because the file names reflect date and time), then doing the same work results in an 8-second delay every time I try to move a clip between bins.
I get the 8-second delay each and every time I drag a clip between bins. It occurs whether I select a single clip to drag or drag multiple clips. As soon as I sort in the panel by Name field instead of the Media File Path field, dragging has no delay.
I have no such trouble with delays in CS5.5, so I'm at a loss. I need to have the bin sorted by Media File Path, because I need them in chronological order as I evaluate them. But an 8-second delay each time I move a clip bogs me down so much it's impractical to get any sorting done.
I suspect this is a bug. I've upgraded to CS6.05, but that didn't fix it. Does anyone have a workaround?
Thanks,
Mike Boom

A good suggestion. I did try that earlier, but alas, no luck.
Sorting works across all bins in the Project panel, so once you sort on the Media File Path, drags are slow from all bins, even if you segment into bins as small as two clips.
Premiere is doing something bad with sorts after CS5.5. Looks like Adobe fell down on regression testing for the updated version. Then again, it's got to be hard to regression test as many features as Premiere has.

Similar Messages

Clips Skipping, stuttering and very slow play back

I understand I'm new to AE but why does every video or clip I try to work with seem to playback very slow and skipping? I'm getting kinda frustrated...please someone tell me how to fix this issue. I have a brand new iMac so I dought if its my system compatability with the software in regards to processing.

Read this.....
....and this.
The second one may be even more important than the first.

Fast color correction effect is very slow in Premiere CC

I have been working on the new premiere cc and the color correction effect is very slow when I make color adjustments on the wheel anyone else having this issue???

I have noticed some response lag with the Effect Controls panel in comparison to CS6 on the same machine.

Files from IDML or CS5, 5.5 become very slow in InDesign CS6

Windows 7 64 bit, core 2 duo, 8 gb ram, plenty of open space on the hard drive.
Files work just fine in CS5 and CS5.5. Opening one of them in CS6 and working in them when just opened is also fine. After saving the file as a CS6 document, closing, and reopening in CS6, selecting text becomes extremely slow...merely putting the cursor in a text frame results in significant delay--the toolbar goes blank and takes several seconds before it redraws. Proceeding to select text and typing changes causes similar behavior.
Opening an IDML file causes similar behavior after the file is saved as CS6 and closed.
Files created in CS6 do not have this problem. It only seems to happen to files converted from previous versions or from IDML.
Does not happen consistently, so I suppose it could be a font issue, although the files in question were originally built on a Mac and are being opened on the PC.

OS is Win7 64 professional.
Turned off Live Preflight etc., tried the .idml export, same problem.
It's only on these specific files that have been opened from a .idml source which came from a Mac system. I had to replace fonts since we did not own the typefaces provided with the packaged files, so I am definitely suspecting a font issue. The original typefaces were OpenType and have been replaced with Adobe versions, although the problem does occur with the OpenType fonts in place.
For now I can work in them using CS 5.5 with no trouble. When time permits I may rebuild these from scratch in CS6, as they are simple layouts anyway, although I also want to figure out exactly what is the cause. Fonts are the chief suspect even though I have them installed locally. I am going to try replacing them with completely different typefaces from newer sources to see if that makes a difference.

Saving tiff from Raw file is very slow (10 min) CS6?

MY OS is 10.7 and using CS 6, Raw 8.3.0 . I am having difficulty saving files from my RAW file, it is now taking up to 10 min just to do a simple save in photoshop. I have 32 GB of Ram and 2700GB on an internal scratch disk. The process of saving will stop at about 50% then stall and at about 8-10 min the file will save as a tiff. What is going on, this just started in the past week?
I reinstalled all programs and OS and updated CS6

anmacka wrote:
MY OS is 10.7 and using CS 6, Raw 8.3.0 . I am having difficulty saving files from my RAW file, it is now taking up to 10 min just to do a simple save in photoshop. I have 32 GB of Ram and 2700GB on an internal scratch disk. The process of saving will stop at about 50% then stall and at about 8-10 min the file will save as a tiff. What is going on, this just started in the past week?
I reinstalled all programs and OS and updated CS6
Whenever I begin to experience a slow-down in my system (Mac OS) I launch "Activity Monitor" which shows me where all my CPU and RAM resources are being allocated and how much. This is where I will usually find the resource hog. There is probably an equivalent system utility for Windows OS.
The next thing I would check (often alluded to by the resource allocation check above) is what programs are being automatically loaded at launch -- your Start-Up list. For a Mac this can be found in the User info. I believe Windows also has this list, maybe somewhere in the Control Panel.
Next, I will do as R_Kelly suggests and replace my preferences files for both Photoshop and Bridge. I have a good copy of each file saved where I can reload it when necessary.
Last I will do a diagnostic hardware test, available on Mac OS by accessing the recovery disk. Not sure about Windows, probably in System Accessories folder or in the Control Panel. Once I discovered I had a bad stick of RAM memory that was slowing things down and even causing Photoshop to crash. Also check to see if your Scratch Disk is clean and defragmented. I re-formated my Scratch Disk once and that cleared up a problem I was having with Photoshop.

Very slow performance in CS6 X64 compared to CS5 X64 and temp file very big

Hello to everyone,
I have the same problem as described on this link and the same "solution" to move to layer "easily without delay" !
http://forums.adobe.com/message/4290563
the solution to remove these huge delays is:
http://forums.adobe.com/message/4290563
"1. Go the Layers Palette fly-out menu and select Panel Options... "
"2. Set Thumbnails to "None"
My computer setup:
Windows 7 x64 SP1
CPU Core i7 (@3.7 GHz)
NVIDIA GTX295 (latest drivers)
Total 12Gb RAM (8Gb for system + 4Gb for RAMDISK R:\)
C:\ = SSD
D:\ = Velociraptor 150Gb
E:\ = Velociraptor 300Gb
R:\ 4Gb (temp files for windows, user, winzip and more)
My tests with file 66.4 MB with much layer, text, group. Photoshop is already running and I use the menu "File / Open" :
IN CS5 (12.0.4) X64:
about 6.13 seconds
size of the temporary file on C:\ = 2951296 KB
Setup in photoshop:
10943 Mo memory seen
Percent of possible use memory 82% (8974 Mo)
IN CS6 X64:
about 137 seconds
size of the temporary file on C:\ = 20216832 KB
Setup in photoshop:
10991 Mo memory seen
Percent of possible use memory 82% (9012 Gb)
Sorry for my bad English, I do my best to explain the problem identified.
Steve

Hi Adam,
I did the test and that's exactly the right solution. Actually if I put "128" (which is default in CS5) instead of 1024 (which is default in CS6), charging is as fast as with CS5 and in addition the temporary file is also much less fat (the same size with CS5 !)
I note that the speed problem that I mentioned is not really a problem, but only because of a difference in configuration "default" of the two versions.
Still the problem of activation or none of "Thumbnails" which creates delays (even unable to work properly) to move layers or group. Problem mentioned (and shown in video) on the link I put in my first message !
Thank you,
Steve

Since last Friday, Type tool is VERY slow in InDesign CS6 8.0.1

Since last Friday, any time I try to switch to the Type tool or using the Type tool try to switch from one text box to another I get the spinning wheel icon and the Control Panel goes blank for 30 to 60 seconds. Double-clicking acts like single-clicking and triple and quadruple-clicking act like double or single-clicking. I'd never had this problem before last Friday and it happens inconsistently. Page thumbnails and instant redraw are turned off and display quality is at Typical. I am using Windows 7 x64 Professional SP1 on a machine with Dual Intel Xeon 3 GHz processors and 8 GB RAM.

Do a system restore to last Thursday....

Final Cut won't let me drag clips to the viewer window

So I'm new to Final Cut and for some reason it won't let me drag clips from the browser to the viewer window or drag clips into bins. It's driving me crazy. Is it possible that I turned off the drag and drop option somehow?

Yes, the selection tool was selected. I actually restarted FC and it's letting me drag clips now so whatever I did is undone. Thanks.

How do I drag clips to a bin?

All of a sudden I did the updates and I can't drag clips from my timeline to a bin? Help?
Creative Cloud Subscription

Why do you want to do this?
The clips are already in the Bin before you started.

Very slow scrolling window thumbnails clips

Very slow scrolling windows with thumbnail clips. The more files in the event, the worse it gets. It is very frustrating. Is in others it is the same? I have MacOookPro i7 early 2011, thunderbolt drives RAID0, 16GB memory, FCPX 10.0.7. After the hardware is decent.
Give some feedback, thank you.
P.S. I might add that this disadvantage are found from version 10.0.0.

You might want to look at either booting from your install dvd (insert, restart and hold 'C' down) and running disk repair from Utilities. Alternatively, and I always suggest any Mac user should have at least one, a 3rd party disk utility like DiskWarrior (there are others) is extremely useful.

InDesign CC 2014 very slow performance when dragging images and changing text

InDesign CC 2014 very slow performance when dragging images and changing text.
Running on 2010 Macpro 2.4GHz. 8GB RAM. Any solutions? I've read through many forums on this and tried several fixes.

Have exact same issue on my Windows 7 machine. Resetting preferences is a workaround.
So I start InDesign whilst holding down these keys.
Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + Shift (Mac)
Whilst inDesign is usable again with this fix- I have to do it every time so it trashes all my preferences so NOT GOOD long term fix. Otherwise InDesign freezes and can only be stopped by forcing a quit.
I have manually deleted the preference files and I have created a brand new admin account - but still no luck - will be onto support tomorrow

Screen moves very slow when i drag a window from one corner to other.

Hi,
We are taking RDP to windows server 2008 R2 standard using Thin-clients.
If I drag a window of explorer or browser to other end of screen it is very slow.(it will work as desktop without video drivers).
Is there any solution for this.
And By the way what is application getting accelerated mean.
Thanks in advance...........

Hi,
Please check if a normal physical computer has the same issue. If not, I’m afraid that the issue is related to the performance of Thin Clients.
Please update the firmware and drivers of your thin clients to the latest and try again.
Thanks.
Jeremy Wu
TechNet Community Support

Flash Movie Clip Run Very Slow

I have about 10 of "coconut tree" Movie Clips, 1 clouds movie
clip, 1sea movie clip. The problem is when i run all of the movie
clips together, the animation run very slow. Can anyone help me
please................................................
thanks

It's hard to tell without knowing what those movie clips
contain. If they contain raster images (bitmaps), have tons of
points, utilize a lot of alpha tweening, etc. it could be the
cause. How does it run with each movie clip running by itself? Are
coconut trees vector or raster? If vector, can you optimize the
shapes any to reduce the number of points?
(Modify>Shape>Optimize)

Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.

Upgrade FCPX

My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      2% iTunes
      2% WindowServer
      0% coreaudiod
      0% fontd
      0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Dragging clips to bins is very slow in Premiere CS6

Similar Messages

Maybe you are looking for