Dragging folder of photos does not create new roll

The help system says if I drag an entire folder into the photo viewing area, iPhoto 4 creates a new roll. But when I try it, it just sorts them all into by date year folders -- often incorrectly.
Can someone tell me what I'm doing wrong?
Thanks.

Thanks for the tip on viewing rolls, but with the dates not sorting properly, it's really kind of messing me up.
Each separate import creates a new film roll. If you select multiple folders and drag into iPhoto, you will get a roll for each folder. If those folders contain subfolders, they may confuse iPhoto. It's best to do this with folders that do not have subfolders.
Also, what I really need is to drop a whole folder in and have that be accepted as a roll by itself, i.e., no further date sorting.
That IS what happens. You can check this for yourself. Immediately after importing a folder, select the "Last Roll" smart album. (If your version has this, it is near the top of the Source Pane just below Library.) Be sure that you have Film Rolls selected for your View, and you'll see the roll and its title. The title should be the same as the name of the folder you imported. Select the roll (click it's title header) and look at the date of the Film Roll. Note that there are 3 dates there: "date" just below title, and "from" and "to" dates below "time." The from and to should give the date of the earliest and latest photo in that roll. To edit those dates, you must select each of those photos and edit the photo date.
What you should check is that first "date". It is the date which represents the entire Film Roll. You can edit it there in the Info Pane. That date is independent of the photo dates. It can be handy to change it, because Film Rolls will display in your library in chronological order based on this date. It can also be confusing if this date is wrong, because a roll you expect to find at the top or bottom of your list may be filed somewhere else. Correct the roll date, and you correct that problem. As I said before, this date could be causing your photos to be filed into the wrong Year Smart Albums, even if the dates on the individual photos are correct.
Regards.

Similar Messages

  • Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

    Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

    The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
    That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
    Ernie

  • ARD 3.3.2 does not create new reports

    Hi all!
    I am running ARD 3.3.2 on my MacBook Pro with Mac OS X 10.6.2
    All my clients are on ARD client 3.3.2 as well but run Mac OS X 10.4.11 or 10.5.8.
    Since I've updated to 10.6 and ARD 3.3.2 i am not able to create new reports (with rebuild with new data check box activated) on any client system. ARD starts the task and stays in the status "waiting for report data" (which is translated from its German version and might be called a little different in English).
    And there it stays--- for a very long time until I get an task failed message.
    All clients are in the same network segment as I am. I am able to observe and control all machines as well as copy and install software onto them. Clients have no firewall activated.
    All clients have one Admin User installed , which is allowed to make full use of ARD functions. When adding the clients to my ARD Computer list I used this Admin User credentials.
    Does the new ARD doesn't support older OSses any more??
    Any ideas , how am I able to solve this and get reports going again???
    Thanx
    Holger
    Message was edited by: Holger Bartsch (added some more detail to client setup)

    I manage 400+ computers at a University using ARD 3.3.2 with Client 3.3.2. I can not generate reports and haven't been able ever since Snow Leopard came out. We also have a developer account and there is no upgrade or version 4 in the works. Perhaps Apple's focus on giving iChat remote access has made them forget about Apple Remote Desktop, which is a shame because it's such a wonderful product.
    We've been looking at Net School Support [http://www.netsupportschool.com/audio.asp] It's not as robust, but I can't continue spending money on a product/company that doesn't care about it's customer's problems. In general Apple's enterprise software efforts seem to be losing functionality instead of improving. OS 9 ARD had audio chat features, non-freezing screen lock and of course, working report generation.

  • Mail dock icon does not create new message when a file is dragged onto it

    After installing Snow Leopard, dragging a file to the the Mail icon in the dock no longer creates a new message with the file attached. Mail is brought forward as the active application, just no new message window.
    This was the behavior in earlier versions of mail.
    Is there a preference, or any other change, that can be changed to allow drag-and-drop of a file to create a new message with an attachment?
    --James

    There are some issues with drag and drop. I was having the same issue with Mail with SL, but I didn't check after 10.6.1. However, I just installed a new hard drive, and migrated. Mail works for me, now.
    It didn't work with my 10.6 which had been upgraded with multiple builds in the beta. I assumed it was related to the other drag and drop issues. Now that I check it again, I don't think so.

  • Petalinux pthread_create does not create new thread?

    The attached test program creates two detached threads. When I run the app and look at the processes in top, I cannot find individual entries for each thread. I tried typing H with top running, but this did not show me any additional information.
    Does this mean that my pthreads are not being created as separate threads somehow?
    A side effect of this is that if the ioctl call made by each thread is blocking, the entier process blocks until the ioctl returns, not just the thread that made the call. In the example below, I have worked around this by making the ioctl non-blocking, but now the process consumes the CPU, which is, of course, undesirable.
    Thanks, in advance, for your help.
    Well, for some reason, the system won't let me attach my source file, so here it is...
     * Placeholder PetaLinux user application.
     * Replace this with your application code
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <errno.h>
    #include <unistd.h>
    #include <fcntl.h>
    #include <sys/types.h>
    #include <sys/ioctl.h>
    #include <sys/socket.h>
    #include <net/if.h>
    #include <pthread.h>
    #define FP_IOCTL_CMD  SIOCDEVPRIVATE + 14
    #define PPS_IOCTL_CMD SIOCDEVPRIVATE + 1
    void* wait_for_frame_pulse(void* arg) {
      int sd;
      int ioctl_result = 0;
      unsigned short fod = 0;
      int flags;
      // setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, "ad160", 5);
      struct ifreq ifr;
      memset(&ifr, 0, sizeof(struct ifreq));
      if ((sd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
        printf("Socket error!\n");
        pthread_exit(NULL);
      flags = fcntl(sd, F_GETFL, 0);
      /* if (fcntl(sd, F_SETFL, O_NONBLOCK) < 0) { */
      /*   printf("fcntl error! %s\n", strerror(errno)); */
      /*   pthread_exit(NULL); */
      strcpy(ifr.ifr_name, "ad160");
      printf("About to start frame pulse waiting cycle.\n");
      while (1) {
        /* printf("Waiting for frame pulse: %d\n", fod%200); */
        while (ioctl(sd, FP_IOCTL_CMD, &ifr) == -1) {
          if (errno != EWOULDBLOCK) {
        printf("AD16NET FP IOCTL failed: %s\n", strerror(errno));
        pthread_exit (NULL);
        /* printf("%d: GOT A FRAME PULSE!\n", fod%200); */
        ++fod;
      pthread_exit(NULL);
    void* wait_for_pulse_per_second(void* arg) {
      int sd;
      unsigned short sod = 0;
      int flags;
      // setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, "ad160", 5);
      struct ifreq ifr;
      memset(&ifr, 0, sizeof(struct ifreq));
      if ((sd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
        printf("Socket error!\n");
        pthread_exit(NULL);
      flags = fcntl(sd, F_GETFL, 0);
      /* if (fcntl(sd, F_SETFL, flags | O_NONBLOCK) < 0) { */
      /*   printf("fcntl error! %s\n", strerror(errno)); */
      /*   pthread_exit(NULL); */
      strcpy(ifr.ifr_name, "ad160");
      printf("About to start pulse per second waiting cycle.\n");
      while (1) {
        /* printf("Waiting for pulse per second: %d\n", sod); */
        while (ioctl(sd, PPS_IOCTL_CMD, &ifr) == -1) {
          if (errno != EWOULDBLOCK) {
        printf("AD16NET PPS IOCTL failed: %s\n", strerror(errno));
        pthread_exit (NULL);
        /* printf("%d: GOT A PPS!\n", sod); */
        ++sod;
      pthread_exit(NULL);
    int main(int argc, char *argv[])
      int s, thread_id_pps, thread_id_fp;
      pthread_attr_t attr;
      struct timespec sleep_time;
      sleep_time.tv_sec = 1;
      sleep_time.tv_nsec = 0;
        printf("Hello, PetaLinux World!\n");
        printf("cmdline args:\n");
        while(argc--)
            printf("%s\n",*argv++);
        s = pthread_attr_init(&attr);
        if (s != 0) {
          perror("pthread_attr_init");
          exit(-1);
        s = pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
        if (s != 0) {
          perror("pthread_attr_setdetachstate");
          exit(-1);
        s = pthread_create(&thread_id_fp,
                   &attr,
                   &wait_for_frame_pulse,
                   NULL);
        if (s) {
          perror("pthread_create 1");
          exit (-1);
        s = pthread_create(&thread_id_pps,
                   &attr,
                   &wait_for_pulse_per_second,
                   NULL);
        if (s) {
          perror("pthread_create 2");
          exit (-1);
        pthread_attr_destroy(&attr);
        /* wait_for_pulse_per_second(); */
        /* if (pthread_detach(thread_id_fp)) { */
        /*   perror("pthread_detach 1"); */
        /*   exit (-1); */
        /* if (pthread_detach(thread_id_pps)) { */
        /*   perror("pthread_detach 2"); */
        /*   exit (-1); */
    #if 0
        int pid = fork();
        if (pid == 0) {
          wait_for_frame_pulse();
        else if (pid > 0) {
          wait_for_pulse_per_second();
        else {
          printf("fork() failed!\n");
          return 1;
    #endif
        pthread_exit(NULL);
        /* while (1) {nanosleep(&sleep_time, NULL);} */
        /* return 0; */

    Actually, that's what I did. I typed "H" while top was running. I just tried it again, and pasted the result, below. Pressing "H" only refreshes the display, nothing else. Also, when I type "top -H" I get the Usage statement, which tells me that the "-H" is not supported.
    Also, since this is a network device, it doesn't appear that there is an option to do an "ioctl_unlocked". The only ioctl specified in struct net_device_ops is "ndo_do_ioctl."
    Of course, being a newb, I could be missing something.
    Mem: 36824K used, 995664K free, 0K shrd, 734928K buff, 734976K cached
    CPU: 13.2% usr 83.6% sys  0.0% nic  3.0% idle  0.0% io  0.0% irq  0.0% sirq
    Load average: 2.39 0.68 0.23 3/45 882
      PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND
      877   873 root     Z        0  0.0   1 96.6 [AD16NET_test]
      873     1 root     S     2956  0.2   0  0.0 -sh
      882   873 root     R     2956  0.2   0  0.0 top
      817     1 root     S     2852  0.2   0  0.0 /sbin/inetd
      857     1 root     S     2764  0.2   0  0.0 udhcpc -R -b -p /var/run/udhcpc.et
      875     1 root     S     2764  0.2   1  0.0 /sbin/httpd -h /srv/www
        1     0 root     S     1860  0.1   0  0.0 init [5]
      393     2 root     RW       0  0.0   1  0.0 [kworker/1:1]
        6     2 root     SW       0  0.0   0  0.0 [kworker/u4:0]
       17     2 root     SW       0  0.0   0  0.0 [kworker/u4:1]
        7     2 root     SW       0  0.0   1  0.0 [rcu_preempt]
       49     2 root     SW       0  0.0   0  0.0 [kworker/0:1]
        2     0 root     SW       0  0.0   1  0.0 [kthreadd]
        3     2 root     SW       0  0.0   0  0.0 [ksoftirqd/0]
        4     2 root     SW       0  0.0   0  0.0 [kworker/0:0]
        5     2 root     SW<      0  0.0   0  0.0 [kworker/0:0H]
        8     2 root     SW       0  0.0   0  0.0 [rcu_sched]
        9     2 root     SW       0  0.0   0  0.0 [rcu_bh]
       10     2 root     SW       0  0.0   0  0.0 [migration/0]
       11     2 root     SW       0  0.0   1  0.0 [migration/1]
     

  • AX does not creat new network?

    Trying to set up 2 AX to extend an existing wireless network (created by an modem/router), I instead chose to have one AX create a new network and have the second AX extend the one created by AX 1. Ax #1 - BASE - is connected to the router by cable, and is configured to create a new network. Configuration is fine - Green light and no problems. However - no new network can be found. My MacBookPro only finds the original network created by the router - not anything created by the AX.

    Please check your settings on AX#1 using AirPort Utility - Manual Setup.
    Click the Wireless tab below the row of icons
    Wireless Mode - Create a Wireless Network
    Wireless Network Name - Your choice
    Check mark next to Allow this network to be extended
    Channel - Automatic
    Radio Mode - Your choice
    Security - Your choice
    Password - Your choice
    Now click the Internet icon at the top of the page
    Connection Sharing at the bottom of the next page must be set to "Off (Bridge Mode)"
    Update to save settings
    On AX#2 AirPort Utility - Manual Setup
    Wireless Mode - Extend a wireless network
    Wireless Network Name - Select the network created by AX#1
    Check mark next to Allow wireless clients
    Security - Exact same setting as AX#1
    Password - Exact same setting as AX#1
    Please post back on your results.

  • Create Save to folder if it does not exist

    I have a script that will save a file to a folder up one level.  In other words if the original file was in client/jpg I wanted it saved in client/digipics.  The client folder will always have a different name.
    I want to add code that will create the "digipics" folder if it does not exist.  Here is what I have so far that works as long as I have the "digipics" folder already created:
    #target photoshop
    var AD = app.activeDocument;
    var imgName = AD.name;
    var CurrentFolder = activeDocument.path;
    var parentFolder = decodeURI(activeDocument.path.parent);
    // Write file up one level into "digipics"
    saveFile = new File(parentFolder + '/' + "digipics" + "/" + imgName)
    saveOptions = new JPEGSaveOptions();
    saveOptions.embedColorProfile = true;
    saveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
    saveOptions.matte = MatteType.NONE;
    saveOptions.quality = 8;
    AD.saveAs(saveFile, saveOptions, true,Extension.LOWERCASE);
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
    What code can I add as an IF statemnt incase I forget to create the folder first.  It would create the folder then save to it.

    #target photoshop
    var AD = app.activeDocument;
    var imgName = AD.name;
    var CurrentFolder = activeDocument.path;
    var parentFolder = decodeURI(activeDocument.path.parent);
    var digiFolder = new Folder(parentFolder + '/' + "digipics");
    if (digiFolder.exists == false) digiFolder.create();
    // Write file up one level into "digipics"
    saveFile = new File(digiFolder + "/" + imgName)
    saveOptions = new JPEGSaveOptions();
    saveOptions.embedColorProfile = true;
    saveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
    saveOptions.matte = MatteType.NONE;
    saveOptions.quality = 8;
    AD.saveAs(saveFile, saveOptions, true,Extension.LOWERCASE);
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
    Should do the job…

  • IPhoto '11 9.4.2 does not recognize new photos on iPhone 4 iOS 5.1.1

    Today when i connected my iPhone 4 the iPhoto app does not recognize new photos from my photo library on my iPhone. Help! Thanx!

    Today, I did try something, i changed to a different USB port and connecting cable from my iPhone to my iMac and with iPhoto already open the photos were visible and i was able to download my newest iPhone photos to my iMac. I did this due to the fact that i had this same connectivity problem with the external back up device i use and when i switched that device to a Firewire cable (from a USB) i can now do external backups. Not sure if the issue is with the cable or the USB port, but this worked for me!

  • I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

    I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

    You can't activate any GSM iPhone without a valid sim card installed in the phone.
    So, yes, you need to get a sim card.

  • Captive runtime -target bundle does not create the package fails after creating a .tmp folder

    Hi Adobe Team, Experts,
    I cannot create a captive runtime package successfully on windows.
    This is the command I am using to create a captive runtime package for windows
    adt -package -keystore CodeSigning.pfx -storetype pkcs12 -storepass password -target bundle TestPackage Test-app.xml Test.swf
    The issue is the above command creates a .tmp directory "adt5072057577475387637.tmp" but does not create a directory by name "TestPackage" .
    Another observation is the above command works in-consistently it seems to create the directory sometimes but fails for the most.
    Funny enough !! It worked when I was creating a POC but  now when I am trying to release it stops working on me.
    It is the same machine I did POC on.
    The application descriptor has
    <supportedProfiles>desktop extendedDesktop</supportedProfiles>
    I have also tried
    adt -package -keystore CodeSigning.pfx -storetype pkcs12 -storepass password -target bundle TestPackage.exe Test-app.xml Test.swf
    as mentioned here -  http://www.riaspace.com/2011/08/bundling-air-3-runtime-in-air-desktop-applications/
    Flex SDK version - 4.6.0
    AIR SDK version - 3.1
    JDK version - jdk1.6.0_18
    Please advise as to how to fix this issue.
    Thanks,
    vshare

    Hi vshare,
    did you ever find a solution to this? I'm running into the same problem with no apparent solution.
    Thanks!

  • Photo does not open in Photoshop as before from Iphoto

    I have a large library with approx 9700 pics. In the past, I was able to double click on a photo in Iphoto and it would open Photoshop CS (PS). PS opens but the chosen photo does not open. I have also noticed that all of the albums in Iphoto are not seen in the PS file browser and that the photos are in numbered folders that I did not create.
    thanks for any help.
    joel wilman

    Hi jwilman,
    To answer your first question:
    You must have done an Archive and Install and the Scripting folder for PS did not get put back where it belonged. You must find that folder and put it back in the root library. or reinstall PS to get the folder.
    Try this suggestion I copied and pasted from MacFixIt first
    "Photoshop CS: Fix for file opening problem Yesterday we reported that since installing Mac OS X 10.4, Photoshop CS refuses to open any new files or create any new documents, reporting a "program error" when one tries to do so. Our previously reported workaround involved re-installing Photoshop CS, but MacFixIt reader Bryan Schappel now offers a faster solution:
    "This happens because the Archive and Install option does not copy over a necessary folder for Photoshop. The critical folder is called 'ScriptingAdditions' and is stored in the main Library folder. This folder contains one file 'Adobe Unit Types' that makes Photoshop open files that have been double-clicked or dragged to the PS icon in the Dock.
    "Simply move this folder (and file) from the 'Previous System' backup to the Library folder, relaunch Photoshop and all is well again. No need to completely re-install.""
    I copied an pasted instead of putting the link in because it is not on the front page and you would have to search around to find it. Hope it is ok to do that here.
    To answer your second question:
    iPhoto 5 now stores the Album information in a data xml file. The Albums folder within the iPhoto Library folder is no longer used. At some point, usually after a rebuild, you will no longer have that folder in the Finder.
    If you need to access photos from an album it is very difficult for a third party application to navigate the iPhoto Library in order to find the photo you need. You will have to know the date of import in order to find the photo.
    There are some third party applications that can read the xml file and can navigate the iPhoto library and show you the Albums. Hopefully more applications will be revised to read this file.
    Until then you will have to Share/Export the photos to the desktop. You can then navigate to the desktop to use the photos (example: web uploading from online photo site)
    If your application supports drag and drop, you can drag the photo from an open iPhoto Library window into your application.
    For email you can also use the email icon within iPhoto to open a message with the highlighted photo attached.
    You can also use spotlight to find images in an Album...
    This is what I have done using Spotlight to find my images that are in iPhoto albums without opening iPhoto..
    In iPhoto, select the album, then select all, go to Photos/batch change.
    Change the comments to text. In the text field I put the name of the Album.
    Do this for each album.
    Close iPhoto.
    Open Spotlight and put in the name of the Album ( you have to remember the names of the albums or have then written down)
    In the spotlight search results. click on "show all"
    Under "Images" click on the "xx more" to show all the images in the album.
    Make sure you have it in icon view, the icon view box is the last one on the blue images line.
    Now you can control click on the image to "reveal in finder", open in iPhoto or Mail, etc.
    I am not sure if this is going to make you happy and it is a little more work, but you can find images in albums and even view them in a slideshow (by clicking the play arrow at the end of the Images highlighted blue line) using Spotlight, all without opening iPhoto.
    One important thing to know is you can set up a graphic program to be an external editor (when you double click an image in the library} such as PhotoShop or PS Elements. You set up that within iPhoto Preferences. Just make sure you save the image flattened and with the same name. The edits will then be relected in iPhoto when you hit "save".
    Two Apple kbs for you to read
    Don't tamper with files in the iPhoto library folder
    About the iPhoto Library folder
    This is a view of how the iPhoto Library looks in the Finder.
    It is organized by Year folders. Inside the Year folders are Month folders. Inside the Month folders are the days of the Month. Inside the day folders are the photos you took on that day. If you imported video clips and RAW files on that day they will be in an Originals folder. If you have edited any photo imported on that day, the original will be in that folder also.
    Lori

  • Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File

    This was working in the previous release.  After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
    This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
    Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
    Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file.  Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
    Report created:
      7/9/2014 1:54:12 AM
    Project name: highup.aep
    Source files collected to:
      P:\temp\highup folder
    Source files collected: All
    Collected comps: 
      Thomas Falke - High Again High On Emotion)
    Number of collected files:  1
    Size of collected files:  63.4 MB
    Collected source files:
      C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
    Rendering plug-ins:
      Classic 3D
    Effects used:  1
    Effect:  Detail-preserving Upscale

    The dialog box has been slightly refactored.  You must click "Allow watch folder rendering" and then all is good.  Hope this helps anyone else.  Thanks to Rafil at customer support chat for this.

  • Photos does not let one edit in external editor ....

    I'm shocked , taken aback indeed , Photos does not allow editing in external software , i.e. Photoshop , .... or am I wrong.
    If it is the case it does not allow external editing , especially in RAW , then I am not impressed .
    iPhoto was rubbish ... really it was .. but if Photos does not allow editing other than within it'self ... well I'm sorry.... it's pure mince ( as we say in Scotland .

    Yes, it's terrible. They've basically ripped away much of the key functionality of iPhoto making it really hard to "get" your photos.
    All you can do until someone hopefully provides a third party plug in (or Apple sees sense) is to try and locate the photo file manually:
    1. Locate Photos Library.photoslibrary
    2. Right click and select Show Package Contents
    3. Open the Masters folder
    4. Three ways to find it:
    Delve manually: in this folder, all your photos are organised by year, month, and supposedly day, and then various subfolders within that but actually it's inconsistent and/or the photos and video are using different time zones*. So you may need to check the previous day or a day later.
    Search within Masters, eg "Created date" is "within last" "5 days" or whatever suits you
    Right click the photo in Photos to get its file name, and search for that as a Finder search. However the photos are so "locked away" that you can't even click Command to see the file path in the search results (as you can usually do with search results). You will need to click "show all in Finder" and then finally you'll get to the actual image (and be able to see the file path).
    As an example, this is what the file path looks like for an image of mine:
    Photos Library.photoslibrary -> Masters -> 2015 -> 04 -> 12 -> 20150412-100955 -> IMG_1881.PNG
    *Note on subfolder craziness:
    As an example, I took two photos on my iPhone today within one minute of each other.  They are in two different subfolders.  A week ago I took six photos over three hours, and they are all in the same subfolder. So it's a complete mess.

  • Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

    Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

    iPhoto does work and there is an upgrade:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Photo does not show up in Adobe Elements

    I have a MacBook and have iphoto set up to open the edit with Adobe Photoshop Elements and not with iphot oediting tool. I had version 8 of APE and upgraded to APE 9 - now the photo does not show up in the Adobe window when I try to edit. How do I fix this ?

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Maybe you are looking for