Dragging photos into iMovie '08 quit working

I have been working on making a movie that is basically a slide show with music using iMovie '08. I drag the picture into place from iPhoto and all was going well until this morning.
When I drag the photo, it looks like it'll work, but bounces back into the iPhoto window. Even if I try to drag a photo that work yesterday, same problem. All photos are .jpg
HELP!!! I need to finish before my daughter's wedding next week!

When things go wrong with iMovie (any version), the first thing I would try is to delete (trash) iMovie's preference file. It's in your User>Library>Preferences folder and is named "com.apple.iMovie.plist" or similar. With iMovie '08 the name is probably "com.apple.iMovie7.plist". If not look for any .plist file containing the iMovie name. The '09 version uses iMovie8 in the .plist name. Be sure to close iMovie before trashing the .plist file.
Don't worry, when next opened iMovie will create a new version with the default settings. You may need to change some settings to suit your own preference.
The preference file can sometimes become corrupted, causing iMovie to behave oddly.
John

Similar Messages

  • When I drag photos into iMovie, the image quality is degraded.  Can I somehow prevent the degradation?

    When I drag photos into iMovie, the image quality is degraded.  Can I somehow prevent the degradation?

    Hi
    A very common origin to jumpy picture is
    • Recorded material in one frame rate e.g. 29.97fps (NTSC) and iDVD set to do a 25fps (PAL) project - OR the other way around.
    It delivers a DVD but a very bad one.
    I do convert all my material to same fps as the DVD I want to do (e.g. PAL) - before any editing etc.
    I use JES_Deinterlacer or Compressor to do this and the result is so much better.
    JES_Deinterlacer is free on Internet and makes a Great job - Professional alternatives comes at an astronomical cost and the quality is not hardly no better.
    Yours Bengt W

  • Trying to drag photo into iMovie project, It shows the correct picture in the time line but plays the adjacent picture in the viewer ?

    trying to drag second set of photos into project. It shows the correct picture in the time line but plays the adjacent,previously imported,picture in the viewer

    I notice that in the photo then has a tick in top left corner.
    Please describe in other words - or add a screen photo so that I get it.
    Howto trash the iMovie pref files - they are two or more.
    • Delete iMovie pref. file
    iMovie pref. file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    and is named. (one or more of these)
    com.apple.iMovie.plist
    com.apple.iMovie3.plist
    com.apple.iMovie7.plist
    com.apple.iMovie8.plist
    com.apple.iMovie9.plist
    com.apple.iMovieApp.plist
    and find
    com.apple.iApps.plist
    While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
    Now restart iMovie.
    If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
    ( It can be done like this: Open Terminal, then enter: chflags nohidden ~/Library
    Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
    Yours Bengt W

  • Dragging photos into imovie

    scanned photos show up in my library but imovie won't allow me to drag them in. any ideas?

    What format are they in? Try converting them to JPEG. You can do this in the Preview app.

  • Help! can't drag photos into or within imovie

    I have a couple hundred pictures in imovie already.  everything was working fine, and now I am unable to drag photos into the project.  it shows the green line and the plus sign as if its adding it but nothing happens.  it has been freezing and i have tried restarting it which worked initially but not anymore.  I can add music and videos, just not pictures. I also realized that I cannot drag the photos around within the project now. I have to present this on Monday! I make a slideshow/movie every year and this is a brand new MacBook so I can't believe I am having problems when my old computer worked fine!

    Any of the Following:
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Again...  photos into imovie...   why doesn't this work at all???!!!

    alright.
    made it a couple times. no problem. but for right now either i have a problem with my mac or here are some nervewrecking coincidences going on to make my life just that more complicated:
    as in every youtube-tutorial about how to get pictures into imovie and in lots of macusers logic to get a photo into imovie you do this with the function of the mediacenter at the center-right. so you go there click on the iphoto and to fast forward everything go for the searchbar and look for the photo you want, drag it to the upper left side or if you changed setting bottom left side and then, what comes next...    yep...   right...   you drop it....   well yeah, if there would be the possibility => i got no possibility to drop my pictures.
    however, this is no problem for me with my videos, with my audio but for some random reason photos are unpossible for me to drag there.
    somebody an advice? something with the setting? it's normal jpeg, it's imovie from the year 2009 which is version 8

    alright, you guys, forget about what i just said...   i know why it's not working, it is a file that is not as a quadratic picture but one that is just cut out of a quadratic picture. so it's probably that's why it is not working....
    so let's take this thing to a different level:
    how can i get things that i cut out from editors like gimp and made a jpeg file out of it get into imovie when they are not quadratic? 
    My idea is to make a video and add in the foreground some little pictures. something like a logo that i can't make with the writing software of imovie. So hoy can i add such a thing or is it even possible?

  • I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

    I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

    The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
    The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
    Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
    This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

  • Can't import photos from new "Photo" into iMovie 9.0.

    Since upgrading to the new Photo app, iMovie 9.0 only recognizes Photo Booth.  Previously I could drag and drop selected photos into iMovie, but now can't import them that way or through the Photo Browser in iMovie.  Any suggestions?

    Thanks for your insight.  Over the course of about a week, I did persistently try to upgrade to iMovie 10 but, despite the help of the Apple Support Community, could not get all my projects to migrate properly from iMovie 9 to 10.  Many of them Many of the 300 short projects come in a jumbled mess.  So I'm stuck with iMovie 9, which, in turn, means Photos won't connect properly when working with iMovie.  At least I know to stop trying and I'm able to go back to iPhoto without suffering any repercussions.

  • Import non-iPhoto photo into iMovie

    How do you import a non-iPhoto photo into iMovie? I cannot figure out a way to do this.
    I use Adobe's Lightroom for all of my photo needs and would like to avoid iPhoto if possible.

    You can drag and drop a photo into your project from the Finder. JPEG or PNG will work best.

  • How do you import photos into imovie?

    How do you import photos into imovie?

    If you can open a Finder Window to your photos, you can drag them in to an iMovie project from the Finder.
    Some third party apps might support drag and drop, but I haven't got Lightroom to test it. If drag and drop from LightRoom does not work, try exporting from LightRoom into a Finder folder and drag them in from there.

  • Can't Drag Photos Into Email

    I have '09 and use Entourage as my email client. For some reason when I updated to '09 I can't drag photos into an open email.
    Not sure if it's an issue with Entourage or iPhoto, but it did work fine prior to my upgrading.
    Any suggestions??
    Also, aside from beginning an email from iPhoto what is the best way to add pictures to an existing (fwd.) or new email not originated from iPhoto??
    Much thanks in advance.

    Any of the Following:
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Photos into iMovie: yes, it's been addressed, but...

    ... I can't find exactly my issue, at least not recently.
    Many of the posts on this topic seem to be about exporting to iDVD, but that's not my problem. It starts earlier. My photos get compressed and look terrible as soon as they're imported into iMovie. I have '09, but the local Apple Store didn't think upgrading to '11 would help, because -- such as I understand -- a single large photo is much bigger than a frame of video or something more or less like that.
    Now, I pretty much just want to do slideshows, high-quality slideshows, and I don't even care about Ken Burns effects. But before you say: DON'T do this in iMovie! That's not what it's for! Do it in something else! Consider:
    -People I know who use Final Cut Pro (which is more than I want to invest, anyway) say that it, too, has problems importing and manipulating photos. No one I know has Final Cut Express to play around with, and there's no Free Demo, obviously.
    -I've now dabbled in both FotoMagico and Photo to Movie, and they seem to have some things going for them, but I can't seem to control audio in them as well as in iMovie, and that's a huge problem. I need to control fades precisely, and I need multiple audio tracks to layer and cross-fade.
    -Other programs I've dabbled with, such as Aperture 3 and Sounds Slides, also have limited ability to manipulate sound and/or adjust the length of individual slides.
    -One responder in a forum last year named Klaus  suggested an elegant work-around: create the slideshow in Photo to Movie (which he uses) or FotoMagico (which he guessed would work ok), and then bring it back into iMovie as a .dv video clip for sound editing and finishing. I tried this, but P2M compressed the images when I saved as a .dv (back to square one), and I couldn't figure out a way to export in FM that iMovie would recognize.
    So . . .
    Is there a better way to import photos into iMovie to preserve integrity? (I don't think so)
    Is there a better way to export video out of FotoMagico or P2M into iMovie?
    Is there something I'm missing about their sound editing capabilities?
    Can Final Cut Express do what I want without much more excess capacity than I need and a huge learning curve?
    Are there any other programs?
    Klaus, Bengt, others -- please weigh in!!!
    Thanks, Danke, Merci . . .
    Fred

        Understanding your data use is important, Rustyhinges! There are many things that can factor into a sudden increase in data. Thank you for ensuring Facebook Video is off. You can also view which applications are using the most data by going to Settings, Data Usage and scrolling to the bottom. As Android_Optimizer mentioned, making sure the device is not syncing to cloud services and restricting background data are great steps to keeping the phone data use, controlled. Please let us know if you have further concerns on this. Thank you.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • Cannot drag photos into iPhoto '09

    I just got a new MacBook Pro and I installed iPhoto '09 and I noticed something odd. I cannot drag photos into iPhoto to import them. I remembered in the previous version on my old MacBook Pro I was able to drag photos to the app (in the photo area) and it would import them. Now the only way dragging works is if I drag the photos to the iPhoto icon on the dock.
    Anyone see this before? I think I might have some strange dragging problem because I can no longer drag attachments from Entourage and save them to folders I have to manually click the save button. I'm not sure if this is related. Thanks
    Message was edited by: Austin-Ben

    It was my Helvetica and Helvetica Neue fonts. They got jacked some how. I moved them and then copied them back and then rebooted. That fixed it. I guess you used to be able to disable and renable them from font book but they were locked so I did it manually. Fixed it.

  • Trouble Importing Photos into iMovie

    I am trying to import photos into iMovie and am having trouble. They look like they are importing OK, and when the import is through (the red bar has finished loading) the picture disappears and the clip becomes blank. This is happening when I import from the finder, from iPhoto, or from FILE>Import, and with lots of different photo sizes, none seem to work. My iMovie project file is located on an external drive with tons of space. I have plenty of space of the startup disk, so I don't know why this is happening, and it was working fine a few days ago. Any ideas?

    I had this problem last year (August-Sept 2007), and I'm having it again now (August 2008). When I import jpeg photos from iPhoto to iMovie, they turn black and are not accessible in iMovie. In addition, this time when I imported several photos, the replay of the iMovie became jerky. When I threw out the photos, the movie became smoother, the way it was originally. There seems to be some sort of bug that has not been fixed in over a year.

  • Trouble inserting photos into iMovie

    I am trying to import some photos into iMovie that I copied from a website. When I try to insert them from a file on my desktop, where I saved them, I only get a portion of the photo. I went back to the folder and opened each picture outside of iMovie and they are complete pictures of high resolution. When I insert them, they turn out to be a part of the photo in low resolution. Ideas?

    You might also try dragging the folder into iphoto and see if they will import there. Then access them from within imovie. If iphoto won't see them then you will need to convert them like was already suggested.

Maybe you are looking for

  • Report for deliveries with price zero

    Hello, the client I'm currently working for is using pricing in deliveries and they would like to have a report that they can use to check which deliveries have price 0 to avoid creating the shipments for them. They are currently finding the deliveri

  • Hyperion products not showing in Services

    Hello Gurus, I have installed and configured the epm system planning, reports, hss but I do not see them in SERVICES, Is thre anything I need to do after the configuration? Thanks

  • Safety Stock Issue

    Hello Gurus, We are in SCM 4.0 and currently we are facing an issue in safety stock calculation. We run a macro to calculate the safety stock. The safety stock for a particular bucket is calculated by the sum of total demand of next consecutive 4 buc

  • Is there any limitation

    Is there any limitation to number of parameters to be passed to a procedure (when submitted using htp post ) Thanks, NPR

  • REPORT showing the RE contract status

    Hi All, Is there any report/table  in SAP REFX which shows the contracts status. Regards Sri