Dragging tabs from one Terminal.app window to another

In Safari, you can drag a tab off and "tear" it off from one window to another. Is there a way to make that work in Terminal.app? It doesn't seem to work on my end with Leopard OS X 10.5.5.

g-pod wrote:
That worked, thanks! I see what happened now. I tried to detach the tab by dragging the tab upward instead of downward, but didn't drag it up far enough for detachment.
I discovered the "bug" with Safari - about dragging "up."
I used the two tab example because it works more easily. But dragging "up" works even when the target terminal has no tab. It's a cool thing
I suspect that the tab portion of termina (or Safari) only opens when "attacked" from below.

Similar Messages

TS1702 Change from one country App Store to another country

How doe one change from one country App Store to another country ????

When I try to change my country in the Account section of the App Store (and the ITunes Store) I receive the message "You have a store credit balance; you must spend your balance before you can change stores."
I am unable to understand the reason for this and can't find a way around this. The amount of credit remaining in my account is less than the price of any App or Song.
I am also concerned after reading other threads that if I change countries, whether the Apps purchased in one country will still be available in the new country.
Some have proposed using credit cards to change the country for the account, but accounts funded through vouchers exclusively should be able to be able to change countries without this requirements.
Thanks in advance for any solutions or comments.

How do I move tabs from one window to another window?

With the previous version of firefox, I could drag a tab from one window to another window. (and if there was only one tab left in that window, it would automatically close that window because there were no more tabs open in it)
With the latest version of firefox, '''How do you drag or move a tab from one window to another window'''

Hi,
To move to the next tab it's '''Ctrl''' + '''Tab''' or '''Ctrl''' + '''Pg Dn''' (Page Down). To go to the previous tabs (reverse order) it's '''Ctrl''' + '''Shift''' + '''Tab''' or '''Ctrl''' + '''Pg Up''' (Page Up) keys. More about this and other keyboard shortcuts [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts here.]

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

How to move tabs from one screen to another?

Just started to group tabs. How can I move tabs from one screen to another to consolidate them into the groups?

See Tab Groups (new in Fx4) (Panorama) [http://support.mozilla.com/en-US/kb/what-are-tab-groups What are Tab Groups] (video included)
From one Window to another Window, by drag & drop
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

Running MacOS 10.8.4 Contacts 7.1 (1170) can't drag cards from one folder to another.

I am running 10.8.4 with contacts 7.1 (1170). I find I can't drag cards from one (any) group to another group. When I restart it shows the card and indicates that it should accept it as it isn't in that group. But doesn't move cards. Then it no longer gives any indication the cards are moving when I drag. When I shut down and restart it gives indication the cards are moving but none move and then no longer gives any indication when I drag. I am syncing with icloud.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below on this page to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

Can i drag files from one computer to another

can i drag files from one computer to another

You can, if you want to transfer files between macs I advies to use AirDrop(wi-fi needs to be enabled). Use shift+command+R, this will take you to your AirDrop in finder. Do this on both computers and you should see the user of the mac where you want to transfer files to.
If the seconds computer is a Windows, you can alway use a USB Drive, External Drive, through Dropbox(install dropbox on both computers and download the files that you need on the second computer) and if the file is small even mail.
Regards,
Jeroen

HT2688 How can I "click and drag" songs from one shared library to another?

I have home sharing activated on my mom's computer and mine and before the newest version of itunes, we were able to click and drag songs from one users' library into the other. We are not able to do that now and I wanted to know if there was a way to do this in the newest version of itunes.

I am using a Windows computer first off, not sure if that makes a difference, When you say "click import" where is import. I can not find anything that says "import" to click.

How to copy a tab from one tab group to another?

In Tab groups view, drag and drop allows one to move one tab from one group to another. But how to copy a tab?

Press '''CTRL''' while dragging to copy instead of moving.

When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?

When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?
I don't mean the ability to see what tabs are open on another device (I know how to do this). But if I am at work and find something that I want to read at home, it would be helpful to 'send' the tab to my home PC so that when I return home, it will automatically open that tab for me.

Can anyone help?

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

This is planned to be fixed in the next release.

Using FDM to transfer data from one HFM app to another

We are facing a project in which we need to load data from one HFM app to another. There're some mapping going so it was advised that FDM be used.
However, the HFM extract files contain all data on the rows. While for the FDM multiload, the data from different periods need to be layed out on the columns. Also, we have multiple scenarios/years of data to handle. What would be the best approach? Has anyone had similar experience to load data from one HFM app to another using FDM? Thanks!

It appears that this is some kind of migration project due to the scope of the data contained in the single file? If so whatever you do is like ly to be trow away once the migration of data is completed.
You have a couple of options:
1) Get the data extracted from HFM in multiple files instead of one bulk file, broken down by scanario,year & period
2) Take the single data dump file produced by FDM and manipulate it yourself to get the data in a more usuable format for processing through FDM.
Option 2 could be achieved via any ETL tool or a custom file parsing script. What may be more attractive to you and allow you to fully leverage your investment in FDM is that you could use the PULL adapter that ships as part of the FDM adapter suite to perform this transformation exercise. The PULL adapter takes a flat file input and allows you to use all the in built functionality of FDM to transform it and output a modified flat file (or series of flat files). You could use it to produce multioload files or a series of files broken down by scenario,year,period.
Whatever you do I would suggest that break the single data file down into smaller chunks as this will help with the iterative debugging process you will inevitably have to undetake whislt migrating the data to the new application.

My ipod jumps from one screen / app to another on it's own. Sometimes I can't unlock or even shut off. I've tried the reset, I've tried back up, even tried restoring to factory settings and is still having problem. Any ideas of what I can do.

My ipod jumps from one screen / app to another on it's own. Sometimes I can't unlock or even shut off. I've tried the reset, I've tried back up, even tried restoring to factory settings and is still having problem. Any ideas of what I can do.

When you still have the problem after restoring to factory defaults/new iPod then you very likely have a hardware problem and an appointment a th Genius Bar of an Apple store is in order.

Sending mail from the terminal app

I was wondering if anyone could tell me how to send an email message from the terminal app. I've been trying to figure it out from the man pages and a book I bought, but I can't get anywhere. I don't mean using OSX Mail, but composing an email message and sending to someone else.
I've been trying to make sense of the man pages (mail and sendmail), and tried to, for example send a message to my gmail account, according to what I thought I understood from the man pages:
mail [[email protected]]
Subject: Test (then I pressed control -D)
EOT
Null message body; hope that's ok
but when I check my gmail account, there's nothing there.
What am I missing?

Jun T. wrote:
But there is a (high) possibility that Gmail's server requires authentication (or certification) to connect to it.
I wonder if they're simply silently dropping emails in certain cases. I forgot earlier that I have a Gmail account. If I send an email from the command line on my home computer, which is on Comcast, the mail log shows that I successfully connect to Gmail, the message is sent and accepted by Gmail, but the email never arrives in my inbox. I've tried several times with the same result.
However, emails from a web server from work get through to Gmail without a problem. So I'd bet it's a case of them not delivering mail from Comcast IP addresses.
For grins, I also tried sending to my Yahoo email account from my home computer and their server at least refuses the connection and I get an error message stating that it's because it's a residential IP address.
In this case you need an SMTP client (=a software which directly sends the mail to the Gmail server) which supports authentication.
I think this might also be possible with Postfix by editing the configuration files. I know I had to set up authentication to send emails to my work address directly from my home computers, but I haven't been able to get the same thing to work with Gmail yet. If I get a chance, I'll look into it again later tonight.
charlie

Dragging tabs from one Terminal.app window to another

Similar Messages

Maybe you are looking for