Dragging video to the Timeline or Canvas from the Viewer

After placing In and Out points in the Viewer, I'm just curious if there is any real benefit to dragging the resulting video to either the Canvas or the Timeline? Is it just a matter of preference? Is one way a better way than the other to get into the habit of doing?
Thanks.

You have control over the track your putting it on if you drag to the timeline. You can also drag it to anyplace in the timeline where if you drag it to the canvas without any in or out point marked in the timeline, it will edit at the playhead. There are probably other differences, but that's what I can think of at the moment.

Similar Messages

Audio won't play in the Viewer but will in the Canvas from the timeline.

If I select a clip from the timeline to open in the viewer, I cannot hear the audio even though both video and audio are selected. This only happens in certain projects. Anyone know why?

In the View menu, make sure the Audio Playback is set correctly.

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

HT5096 where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one?

where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one? At the moment when I try to do it, the window that appear doesn't allow me to continue. it only says "the volume has the wrong case sensitivity". thanks

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

Display employees details in the stacked canvas from the content canvas

Hi all,
       I want to display employees details in the stacked canvas from the content canvas,where i passed the empno & click on the find button , i have 2 blocks(emp,control), in control block only find button there, I have only one table i.e;emp
BEGIN
    GO_BLOCK('EMP');
    Set_block_property('EMP', default_where, 'Empno = :EMP.EMPNO');
     Show_view('EMP_DET_CAN');
    execute_query;
END;
Thank You

Hi Andreas Wieden,
Andreas Weiden wrote:
When you query on the EMP-block, yiou cannot include a WHERE-condition to that block as the block is cleared when the EXECUTE_QUERY starts. If you want to have a different find-block where you enter your search-condition, you have to include that item in your separate find-block. Otherwise use the standard-search-mechanism with ENTER_QUERY and EXECUTE_QUERY.
You are right, so where clause is not possible in the same block, right?.I have to take empno column where it is a search column into the control block right?
Please suggest me i want to retrieve records into the stacked canvas when i pass the empno & click on the find button in the content canvas? Is this not possible? If possible please let me know? I mean i want to take the search column in the EMP Block & find button in the control block..
Thank You

HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

How do I use cookies to control which part of the timeline to play from?

Hi there,
I have created an animation with Adobe Edge. My site uses Concrete5 and I am pulling in the Edge content into an IFRAME on my home page (there my be a better way to do this and I'm open to suggestions). I want the animation to play from the start when someone first visits the site, but if during their browser session they navigate back to the home page, I want the animation to only play a shorter segment of frames near the end.
My question is, how do I use cookies to acheive this? I'm new to javascript/jquery.
I've included the following code on compositionReady, (found in another post on this forum) but don't have a clue how to continue...
// insert code to be run when the composition is fully loaded here yepnope( { nope:[ '/js/jquery.cookie.js' ], complete: init } ); function init() { //create your cookie's initial values here }
My temp site is here - http://79.170.40.43/nutcrackerdesign.co.uk/
On revisting the homepage, I only want to play from when the green 'How can we help?' button drops in.
Many thanks!
Russ

Hi, Russ-
I found this article, which seemed really helpful in describing how cookies work in JavaScript:
http://www.quirksmode.org/js/cookies.html
Remember that JS works just fine within Animate, so on your compositionReady, you can read your cookie and then set the play based on that. You should probably uncheck the autoplay for your Stage and control the play of your Stage from the compositionReady.
Good luck!
-Elaine

If I want to keep the quality of the original captured footage(from the tapes),what format should I?

I captured canon hv20 by firewire to my computer with adobe premiere elements 11. After capture, I have cutted clip three times. Then I want to export my computer because of I watch on my 46 inches full hd lcd television. If I want to keep the quality of the original captured footage (from the tapes), what format should I? I choosen mpeg 1440x1080i 24, it alerts error. Or i chosee avchd 1920x1080p, then it is too larger than captured scenes. I think it is 20000MB but captured scened (without cut) only 11.2 gb. Please help me. Thanks very much.

YCLCS
File size and Bitrate and Quality are interrelated. From what I have read, the bitrate for your HDV footage from the PAL Canon HV20 camcorder should be about 25 Mbps (megabits per second). If you did a HDV data capture firewire into Premiere Elements, you should MPEG2.mpg file on the Timeline.
When you did your export
Publish+Share
Computer
MPEG
using Presets = MPEG2 1440 x 1080i25, did you make any changes in the settings under the Advanced Button/Video Tab of the preset?
When you look at the settings in the Export Settings dialog for the MPEG 1440 x 1080i25 preset, you will see the default bitrate settings
Minimum = 18 Mbps
Target = 25 Mbps
Maximum = 30 Mbps
The program's export bitrate may be higher than that of your source media, resulting in the increased file size. You can check out the bitrate, using the properties readout from a free program such a MediaInfo
http://mediainfo.sourceforge.net/en
You could experiment with different bitrate, trying to maintain the quality as you decrease the maximum bitrate from 30 Mbps downward to reduce the file size.
The file extension of your export should be .m2t, .mpg. So, your export is MPEG2.m2t. I find that that type of file will playback in Windows Media Player, but not QuickTime (latest version). This particular export would be the closest to the source media properties.
But, right now I would try to perfect the MPEG2 1440 x 1080i25, experimenting with the bitrate to bring the file size into line with the source file and still maintain video quality. The AVCHD.mp4 suggested by Ann Bens is a prime candidate quality wise. If size becomes a factor, you might want to explore a 1920 x 1080i25 or 1440 x 1080i25 Windows Media Video 9.wmv file which we can discuss in more detail depending on how things are going.
Please review the above and then let us know how we can help.
Thanks.
ATR

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

Forms 6i prints ugly when using the Forms print command from the menu

When we use the Oracle Forms print built-in to print the screen-shots, the print-out turns out to be ugly with lots of dots all over.
We are using Forms 6i (6.0.8.11.3) running on 9iAS on Windows 2000. The version of JInitiator we are using is 1.1.7.31. The forms open up in a separate frame.
The interesting thing is when we print from a Windows 2000 machine, the screen-prints are OK. But they are messed up when we use a windows 98/95 machine.
Any suggestions folks? Thanks

Craig Bagley1 wrote:
Any clues? I don't find anything in the Finder Help files to explain the Print command's use.
If in the Finder I pull down the "Help" menu and type "Print" in the "Search" box, I see one "Menu Items" entry and five "Help Topics". If I click on the one for "Printing a closed document", it shows information that discusses printing one document at a time. I don't know if it's possible to print more than one document that way.
Try this: Open the "Print & Fax" panel of System Preferences. Drag the printer's icon from the list on the left onto your Desktop. The result will be an icon that is an alias for the printer. Now try dragging several documents onto that icon.

I am attempting to make a 2013 calendar from my 2009and wanted to transfer material but all the dates have disappeared from the caldendar pages. I know they must be there. How do I retrieve so I do not have to retype info.?

I am attempting to transfer material from a 2009 calendar project to my 2013 but seem to have lot the printed date info from the original project. Any idea How I might recover it?

Alright, I got the centering figured out, so this is what ive got so far-
   import javax.swing.*;
   import java.awt.*;
   import java.lang.Math;
    public class Memory extends java.applet.Applet
      private int xMouse;
      private int yMouse;
      private boolean mouseClicked = false;
      private boolean firstRun = true;
      private static final int WIDTH = 100;
       public void init()
         setBackground(Color.BLACK);
       public void paint(Graphics canvas)
         if(firstRun)
            buildBoard(4);
            firstRun = false;
         else
            displayGame(canvas);
            if (mouseClicked)
               displayHit(canvas);
               mouseClicked = false;
       public boolean mouseDown(Event e, int x, int y )
         mouseClicked = true;
         xMouse = x;
         yMouse = y;
         repaint();
         return true;
       public void update ( Graphics g )
         paint(g);
       public void buildBoard(int s)
       public void displayGame(Graphics canvas)
         canvas.setColor(Color.WHITE);
         for(int i =0; i < 400; i+= WIDTH)
            for(int j = 0; j < 400; j+= WIDTH)
               canvas.drawRect(i, j, WIDTH, WIDTH);
       public void displayHit(Graphics g)
         g.setColor(Color.BLUE);
         int x = xMouse / WIDTH;
         x *= WIDTH;
         int y = yMouse / WIDTH;
         y *= WIDTH;
         g.fillOval(x+30, y+30, 40, 40);
   }

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

IMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.

iMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.
Any ideas?

You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
most common cause of your not finding them is bad sort - view menu ==> sort events
Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
YOu can alwasy find the event a Photo is in by selecting it and selecting show event
LN

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

About seven weeks ago when I was in China the "Favoriter" (Favorites) disapeard from the tool bar. What to do to get "Favoriter" back?

About seven weeks ago when I was in China the "Favoriter" (Favorites) disapeard from the tool bar. What to do to get "Favoriter" back?

If you have a problem with the bookmarks then see:
http://kb.mozillazine.org/Lost_bookmarks
* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

Dragging video to the Timeline or Canvas from the Viewer

Similar Messages

Maybe you are looking for