Dragon edition 2 .. please help
hello
well ... i have bought a new laptop (dragon edition2 ) GT70 2OD
ITS CUSTOMIZE .. AND I WANT TO MAKE SURE WHAT I DO HAVE NOW
THE SCREEN IS 17.3 FUD NON-GLARE TYPE ( IS THIS MEAN ITS ANTI-GLARE ?)
MY HDD IS : 750GB 7200RPM + 128 SSD SUPERRAID ( IS THIS TH SUPERRAID 2? )
FINALLY CAN I ADD ANOTHER SSD HARD DRIVE ?MY CURRENT SSD IS 128GB ONLY WITH A 750GN 7200RPM
FROM WHERE I CAN DOWNLOAD AND UPDATE MY LAPTOP DRIVER ? I WANT TO SEARCH BY PRODUCT CODE
NON-GLARE TYPE ( IS THIS MEAN ITS ANTI-GLARE ?)
Yes it means non-glare type,
SUPER RAID supports two SSD, SUPER RAID supports three SSD.
if you want to add more SSD better use the same types of SSD to ensure the reliability. Better through service center otherwise the warrantee may violate.
Similar Messages
-
Hi,
i cant seem to be able to edit any of the profile.. when i go to profile-advanced-normal- it freeezes and i have 2 restore my fone.. and when i restard it i get a message saying
blackberry problem Uncaught exception:application net_rim_bb_profiles_app(192) is not responding,process terminated
i am able to change profiles but is stuck on silent. for example when i change from vibrate to normal its still quiet and no notifications..
please help.Hi and welcome to the forums.
I would reload the device.
Use the following procedure.
Thanks,
Bifocals
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Please read TANZIM'S POST
http://supportforums.blackberry.com/rim/board/message?board.id=General_Functions&thread.id=3209
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Not able to use oracel database 11g express edition ? please help !!!
after installing oracel database11g express edition , i am not being able to use it ,because when i click on get started with oracel database 11g express edition it will divert me to ip http://127.0.0.1:8080/apex/f?p=4950 and after this it show
Oops! Google Chrome could not connect to 127.0.0.1:8080
so please help me out , as i am beginner and new to this , so i don't have deep knowledge of this ,so please help me out ,as soon as possibleHi,
Provide more info like os and its version - https://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
Did installation complete successfully?
check if database is up
start command prompt
sqlplus / as sysdba
select open_mode from v$database;
check the status of listener
lsnrctl status
Post the output of above commands here
Regards
Yoonas -
Making a Table cell editable. Please Help
Hello there,
I have written an Inner class called CallHeaderRenderer
which is used to select to highlight a row from a table.
But i am unable to edit the column data I click on.
Please can any one tell me how to edit the column value when you double click on it??
Attached is my Inner class used to select the concerned row.
I am unable to edit the concerned column.....
Please help.!!!
What is the statement to make the cell editable!!!
class CallHeaderRenderer extends DefaultTableCellRenderer{
public CallHeaderRenderer(){
super();
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column){
// Set the highlight for record chosen.
super.getTableCellRendererComponent(table,value,isSelected,hasFocus,row,column);
return this;
}A renderer has nothing to do with editing the cell. I suggest you read this section from the Swing tutorial on "Using Tables" for an explanation of how tables work. The tutorial will give one method for making a cell editable:
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
Here is an alternate way to make a cell editable:
table = new JTable( ... )
public boolean isCellEditable(int row, int column)
// All columns, except the first, are editable
if (column == 0)
return false;
else
return true;
}; -
My internal video camera stopped working on my envy 13 beats edition . Please Help.
My internal video camera stopped working. It will not start and the light doesn;t come on anymore. Please Help ASAP. Thank you.
HP Envy 13 Beats Edition
Windows 7 64-bit
No changes made to systemHello Jamienix,
We've an article that can help resolve most issues you may encounter with activating Messages.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen -
Audio and Video out of sync during editing. PLEASE HELP
I am using a MacBook Pro. Specs are:
- OS X version 10.9.2
- 2.5GHz Intel Core i5 Processor
- 4GB 1600MHz DDR3 RAM
When I import a video into AfterEffects CC, the audio and video are out of sync. The audio and video files are the right size, length etc. but are way out of sync. By the end of a 2 minute video, it can be out by up to 5-6 seconds. This applies to videos imported from any device. iPhone, USB and even videos I've recorded directly from my computer. Most files I try and import are MP4 files, but I've found the same issues with all other video files. I've even tried importing them separetely as an audio file and then as a video file. Nothing seems to work. I am also experienceing the same issue with Premiere CC.
Please help. I am needing these programs to work for assessment items.
- AndrewWithout knowing the specs of your videos it is hard to say. I'm also running a Mac and am having no such issues.
My first thought is that you have something from a 3rd party installed that is causing conflicts. If all else fails try transcoding your mp4 files to a frame based codec using the Adobe Media Encoder. Pick one of the Apple production codecs or Jpeg compressed QuickTime.
Are you running a ram preview? Did you render your Premiere timeline? Are you new to AE? -
Table Editing Problems--- Please Help!!!
I have implemented a table model that adds an extra blank row . Now when
i enter some value into the first row and press enter i find that the value is lost. (the row goes blank and a new row is not added).the table model stores the new value though.
The table has 1 column and its header is set to null
here is the code
class ReportTableModel extends AbstractTableModel
Object[][] data;
Vector rows ;
public ReportTableModel(Vector rows) {
this.rows = rows;
setTableData();
public int getColumnCount() {
return 1;
public int getRowCount() {
return rows.size()+1;
public String getColumnName(int col) {
return null;
public boolean isCellEditable(int row,int col)
return true;
public Object getValueAt(int row, int col) {
if (row == 0)
return "";
return data[row][col];
public Class getColumnClass(int col) {
return "".getClass();
public void setValueAt(Object value, int row, int col) {
data[row][col] = value.toString();
rows.add(value.toString());
setTableData();
public void setTableData() {
data = new Object[rows.size()+1][1];
for (int i=0,k=1; i < rows.size(); k++,i++) {
data[k][0] = rows.get(i).toString();
this.fireTableDataChanged();
Please help!!!!
Thank you,
Phani KanuriDo you add the new table to the scrollpane? Generally, it is wise to use table in constructor of JScrollPane.
JScrollPane jsp = new JScollPane(myTable);
// assuming myTable has been instantiated already
Cheers
DB -
I want/need to get my bookmarks, fill forms, etc. from comodo dragon to comodo ice dragon with help. I am not sure how to do it because I tried telling it to import it from Chrome since regular dragon is based on that, but obviously it didn't work. I need help please.
Probably best to use an intermediate HTML-format file. I found these directions on Comodo's site:
(1) Export from Comodo Dragon
* Click the Comodo Dragon icon located at the top-left corner
* Select 'Bookmark manager' from the menu.
* Click 'Organize' and select 'Export bookmarks' from the menu.
* Choose a location where you want the bookmarks to be saved and click the 'Save' button.
* The bookmarks will be saved as a HTML file.
Source: [http://help.comodo.com/topic-120-1-279-2553-Importing-And-Exporting-Bookmarks.html Comodo Dragon - Importing And Exporting Bookmarks | Web Browser]
(2) Import into Comodo IceDragon
* Click the IceDragon button at the top left corner:
* Select 'Bookmarks' from the menu > Show All Bookmarks.
* Click the 'Import and Backup' tab on the Library window.
* Click 'Import Import Bookmarks from HTML'.
* Navigate to the HTML file saved in your computer and click 'Open'.
Source: [http://help.comodo.com/topic-169-1-413-4483-importing,-exporting-and-baking-up-bookmarks.html Importing and Exporting Bookmarks, History Page | Web Browser & Internet Solutions]
Does it work?
If you previously used Firefox, I'll be curious to hear your comments about how IceDragon is different. -
SOS problem using one Entity bean for editing records. please help me
Hello
I have one great problem using one entity bean 2.1 and i am working with this problem several days and i dont solve it.
i am using this jb 2.1 for add new records to one oracle database and for editing records.
I have one great problem for editing records
I have one objets that is as one of my database table. (PersonaObj.java)
//personaObj.java
public class PersonaObj implements Serializable{
private Integer id_persona; //this ishte database table autonumeric
private java.lang.String nombre;
now the set/get methods.
One field of this objets (bean) is the primary key of the table, and this field is one part of the pk from the entity bean.
From one session bean i call the entity bena passing the objet
into the entity bean (interface) i have one methods:
public getPersona getT56aaat04();
public void setPersona(PersonaObj obj);
into the entitybean bean i have:
public PersonaEntityPK ejbCreate(PersonaObj obj) throws CreateException {
this.setT56aaat04(obj);
public abstract Integer getId_persona();
public abstract void setId_persona(Integer Id_persona);
public abstract java.lang.String getNombre();
public abstract void setNombre(java.lang.String Nombre);
public PersonaObj getPersona() {
PersonaObj obj = new PersonaObj();
obj.setId_persona(getId_persona());
obj.setNombre(getNombre());
return obj;
public void setPersona(PersonaObj obj) {
setId_persona(obj.getId_persona());
setNombre(obj.getNombre());
But i have one graet problem.
adding new record to the database i runs well but if i want to edit one recor appears this error:
=> Error <=
java.rmi.RemoteException: EJB Exception: ; nested exception is: javax.ejb.EJBException: EJB Exception: : java.lang.IllegalStateException:[EJB:010144]The setXXX method for a primary key field may only be called during ejbCreate.
at PersonasEJB_a43o8n__WebLogic_CMP_RDBMS.setId_persona(PersonasEntityEJB_a43o8n__WebLogic_CMP_RDBMS.java:328)
at PersonasEntityBean.setPersona(PersonasEntityBean.java:114)
at PersonasEntityEJB_a43o8n_ELOImpl.setPersona(PersonasEntityEJB_a43o8n_ELOImpl.java:45)
at PersonasSessionBean.editarPersona(PersonasSessionBean.java:849)
at PersonasSessionBean_bszo9t_EOImpl.editarPersona(PersonasSessionBean_bszo9t_EOImpl.java:208)
at PersonasSessionBean_bszo9t_EOImpl_WLSkel.invoke(Unknown Source)
into the session bean i make this (the session recibes one PersonaObj obj):
T56aContactosEntityLocal personaLocal ;
try {
personaLocal = personaHome.findByPrimaryKey(new T56aContactosEntityPK(obj.getId_a04()));
T56aaat04Obj objTmp = new T56aaat04Obj();
objTmp.setAp1_a04(obj.getAp1_a04());
objTmp.setEstado_a04("false");
personaLocal.setT56aaat04(obj);
Please can you help me to solve this problem?Hello Werner,
The mappings seem to be alright at a first glance.
Have you tried out un- and redeploying your application? Sometimes values appear to be cached in the server. So if you have deployed the application before you entered DB_BANK as alias this might solve the problem...
BR
Daniel -
I bought this phone from someone and then I unlocked it using that gevey sim i think -- using it for T-mobile..
I can't get Imessage to work on my phone number because the old number is there and it is grayed out and cannot be edited.
I can use it but not with my phone number, only with email.
Can someone please tell me how to fix this so that I can send with my number?
Thanks so muchThe advisor should not have told you this for legal reasons. There is no way of tracking the iPhones just of finding out which SIM cards were used to activate them and if they were activated at all. Court can authorize Apple to release this information to the count. There is no legal way without involving a judge.
-
Spry Menu Bar Editing Links PLEASE HELP
Ok I am a new user and this is my first site and I have a question regarding creating links in the spry menu bar.
I created my home page with a spry menu bar and I have begun creating pages to link to my home page.
My question is when I navigate to another page from my home page my spry menu bar on the second page does not have the links set for the spry menu. Do I have to input all the links again on each additional page or is there an easier way to copy from my home page.
I am creating an online store and my homepage menu bar has over thirty links to products pages. Each page has the original banner and spry menu bar from my home page but the links arent set on any of the products pages. Do I have to go into each one of my thirty pages and create the thirty links to the other pages? and if that is the case what if I want to change or add additional links to the home page for new products launching? Do I have to update the links and spry menu bar on all of the additional pages as well?
If anyone can help me out I would greatly appreciate it. Any answer would be helpful even if its not the one I want.If you're not using DW Templates to spawn site pages or Server-Side Includes for sitewide menus, you definitely must edit each menu on each page and upload to your server. Tedious.
Server-Side Includes are a huge time saver. Learn to use them.
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Nancy O. -
XML dynamic editing. Please Help
I have an XML file being returned back from a function.
This function is called twice,there by returning back
2 XML which are then added together and returned
as a CLOB.
sdiXML CLOB;
xml1 VARCHAR2(250);
xml2 VARCHAR2(250);
xml1 = createXML(.....); // function using DBMS_XMLQuery to create XML
XML2 = createXML(.....); // ""
sdiXML = appendXML(xml1,xml2);Code for function appendXML is:
CREATE OR REPLACE FUNCTION append_xml(
clob1 IN OUT CLOB,
clob2 IN OUT CLOB)
RETURN CLOB
AS
BEGIN
DBMS_LOB.APPEND(clob1,clob2);
RETURN Dest_clob;
END;All works fine.
I get 2 outputs integrated into one CLOB.
<?xml version = '1.0'?>
<SDIEXTRACT>
<SDIOWNER>THEIRS</SDIOWNER>
<CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>
</SDIEXTRACT>
<?xml version = '10'?>
<SDIEXTRACT>
<SDIOWNER>OURS</SDIOWNER>
<CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>
</SDIEXTRACT>
Now,the problem is that when I try to open the this file in an XML Editor,
this displays the error 'XML not well formed'.
So I need to delete the 1st XML's </SDIEXTRACT> and the 2nd XML's <xml version..>
and <SDIEXTRACT> manually, so that the XML looks like and which is well formed.
<?xml version = '1.0'?>
<SDIEXTRACT>
<SDIOWNER>THEIRS</SDIOWNER>
<CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>
<SDIOWNER>OURS</SDIOWNER>
<CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>
</SDIEXTRACT> Is there a way by which I can merge these 2 docs toegther as a WELL FORMED thru the
application itself without the hassle of manually editing the XML code?
Has anyone understood my point?
Please suggest an option.SQL> CREATE OR REPLACE FUNCTION merge_xml RETURN CLOB IS
2 --
3 -- Merge XML2 into XML1 and return the result
4 --
5 xml1 CLOB := '<?xml version = ''1.0''?>' || '<SDIEXTRACT>' || '<SDI>' ||
6 ' <SDIOWNER>THEIRS</SDIOWNER>' ||
7 ' <CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>' || '</SDI>' ||
8 '</SDIEXTRACT>';
9
10 xml2 CLOB := '<?xml version = ''1.0''?>' || '<SDIEXTRACT>' || '<SDI>' ||
11 ' <SDIOWNER>OURS</SDIOWNER>' ||
12 ' <CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>' || '</SDI>' ||
13 '<SDI>' || ' <SDIOWNER>YOURS</SDIOWNER>' ||
14 ' <CONFIRM_ONLY_FLAG>H</CONFIRM_ONLY_FLAG>' || '</SDI>' ||
15 '</SDIEXTRACT>';
16
17 dom1 xmldom.DOMDocument;
18 dom2 xmldom.DOMDocument;
19 p xmlparser.Parser;
20 n xmldom.DOMNode;
21 nn xmldom.DOMNode;
22 t_lob CLOB;
23 BEGIN
24 p := xmlparser.newParser;
25 xmlparser.parseClob(p => p,
26 doc => xml1);
27 dom1 := xmlparser.getDocument(p => p);
28
29 xmlparser.parseClob(p => p,
30 doc => xml2);
31 dom2 := xmlparser.getDocument(p => p);
32 xmlparser.freeParser(p => p);
33
34 n := xmldom.getFirstChild(n => xmldom.makeNode(xmldom.getDocumentElement(doc => dom2)));
35 WHILE (NOT xmldom.isNull(n))
36 LOOP
37 nn := xmldom.importNode(n => dom1,
38 srcNode => n,
39 deep => TRUE);
40 nn := xmldom.appendChild(xmldom.makeNode(xmldom.getDocumentElement(doc => dom1)),
41 nn);
42 n := xmldom.getNextSibling(n => n);
43 END LOOP;
44 dbms_lob.createtemporary(lob_loc => t_lob,
45 cache => TRUE);
46 xmldom.writeToClob(dom1,
47 t_lob);
48 xmldom.freeDocument(doc => dom1);
49 xmldom.freeDocument(doc => dom2);
50 RETURN(t_lob);
51 END;
52 /
Function created.
SQL> SHOW ERRORS
No errors.
SQL> SELECT merge_xml FROM dual ;
MERGE_XML
<?xml version = '1.0'?>
<SDIEXTRACT>
<SDI>
<SDIOWNER>THEIRS</SDIOWNER>
<CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>
</SDI>
<SDI>
<SDIOWNER>OURS</SDIOWNER>
<CONFIRM_ONLY_FLAG>N</CONFIRM_ONLY_FLAG>
</SDI>
<SDI>
<SDIOWNER>YOURS</SDIOWNER>
<CONFIRM_ONLY_FLAG>H</CONFIRM_ONLY_FLAG>
</SDI>
</SDIEXTRACT>
1 row selected.
SQL> -
Hi All,
Premiere Pro CC has been crashing for me repeatedly for several months now, and I'm completely out of ideas to try to fix the problem. I have several projects that I'm attempting to work on, and all of them involving syncing up twenty or thirty clips by audio. Every time I try to sync, the progress bar will show a small amount of "progress" and then it will freeze and crash. Any ideas what may be causing this?
Below are the specs on my system. I've never had trouble with Premiere syncing before, but this just began around the time of the Yosemite update. Is there a known-issue with the new operating system and Premiere?
Thanks for any ideas, I appreciate it very much!
Model Name: MacBook Pro
Model Identifier: MacBookPro10,1
Processor Name: Intel Core i7
Processor Speed: 2.6 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB
Boot ROM Version: MBP101.00EE.B07
SMC Version (system): 2.3f35
Serial Number (system): C02JT6BDDKQ2
Hardware UUID: 14BB54EC-EA30-5606-A211-4F04CB8319A0tell us more, like what kind of media? The audio might not be the problem, maybe type of media. With just the media alone, does Premiere play all fine? Does your media frame rate match? All the same, like progressive or interlaced. I am not knowing because I have never Premiere crash when auto audio sync'ing, but have had Premiere crash with lots of other situations.
-
I need to know how to view a question I asked earlier. How do I uninstall an APP from my PC.
Your system is not working. No one has replied, yet you are asking me to reply.
-
Urgent iMovie 6 Question--PLEASE HELP!!!
Hey everyone in the Support Community,
I was recently editing a school project on iMovie 6 (on a Mac OS X Tiger 10.4.11) when the screen just froze. Nothing on the entire screen would respond. So I foolishly pulled the plug on the computer, and when I turned it back on, I was unable to open the movie file. I would double click on the icon, it would load about a third of the way, and then iMovie would quit. Because it always stopped loading and quit at the same point, I figure I corrupted a file by pulling the plug. So, basically, I screwed up an iMovie file and now can't open it.
(This is where it would always lock up)
(And here's what happened)
I am really clueless about what to do. I tried searching web forums, spent a half-hour just trying to brute force it, and even called the Apple Support Hotline (they apparently don't offer assistance for computers/apps as old as mine ) If I haven't been clear enough about the problem, I'd be happy to give any additional information.
I would super-appreciate any help. This project needs to be completed by this coming Tuesday (it's currently Friday) and I have a couple other guys relying on me to finish up the editing. PLEASE HELP ME!!! I WOULD BE FOREVER GRATEFUL!!!
-DannieUnless you saved the project it will have become corrupted by that sudden shut-down.
You may need to re-create the project.
But first try this:
Close iMovie. Go to to Home/Library/Preferences and delete the file com.apple.iMovie.plist
Restart iMovie and reset all your preferences, then try opening that project again. -
Help needed urgently .. Please help...
I am using JTable in my project where i am overriding the default editor to my own custom editor.
The problem is, when i am using tab key or mouse click, the cursor does not immediately move the next/clicked editable cell. I have to press the tab key twice to move to the next cell. After debugging i saw that the focus goes from the cell editor to the table and then on the second click to the next editor.
My project requires a single click/single tab key pressed to make the cells editable.
Please help..
Thanks in advance..
Preeti.Hi!
I really have to get this Tab thing working.
This is what I have tried, and it works partially.
public boolean isManagingFocus()
return true;
public boolean isFocusCycleRoot()
return true;
* Captures tabs and moves focus to the next or previous cell, depending
* on whether the <Shift> key was also pressed (i.e. tab or back tab).
public void processComponentKeyEvent(KeyEvent e)
if ( (e.getID() == KeyEvent.KEY_TYPED) && (e.toString().toLowerCase().indexOf(",tab") >= 0) )
if (e.isShiftDown())
tabToNextEditableCell(BACKWARD);
else
tabToNextEditableCell(FORWARD); // tab
e.consume();
else
super.processComponentKeyEvent(e);
* Sets editing focus onto next editable cell.
* When moving forward, traverses cells from left to right then top to
* bottom
* @param direction FORWARD or BACKWARD
private void tabToNextEditableCell(int direction)
int x = getSelectedRow();
int y = getSelectedColumn();
//Added
clearSelection();
if ( direction == FORWARD && x < getRowCount() )
editCellAt(x+1, ATTRIBUTE_VALUE_COL);
else if (direction == BACKWARD && x >0)
editCellAt(x-1, ATTRIBUTE_VALUE_COL);
Let me describe what is happening..
When I click tab, it moves 2 rows down, The table still highlights the next cell, but since it is not editable, I cant do anything, when I click Tab it moves to the next editable cell, which means that if the current cell is editable the table highlight moves to the next cell (which is not editable), and on the next tab it starts editing the cell.
I dont know if I made too much sense... but I reallly need help with this.
Maybe you are looking for
-
Authorization in struts application, how to do it simple and elegant?
hey all, I am trying to implement a sturts application with authorization. The basic idea is this: users has permissions to execute commands based on their given privileges (stored in db). one possibility I have is to check their permission in the me
-
Attempting to download the trial version
I've been attempting unsuccessfully to download the 180day trial version of SharePoint from http://www.microsoft.com/en-us/evalcenter/ I've registered I see it in the evaluation center but it does not allow me to download it. Is there a direct link t
-
GPIB-ENET not working in Windows NT 4.0
I have a GPIB-ENET device and I want to configure it with Windows NT4.0 I have install everything like it is said in the NI web site and everything seems to be fine. When I try to talk to the instruments with Win32 Interactive Control (IBIC) it works
-
CRS 10.1 with Endeca 3.1.1 - How to import CRS Endeca Site to Dev Studio?
I'm new to Endeca and I'd like to get familiar with Endeca Developer Studio. I'd like, if it possible, to import CRS Site configuration to Endeca Developer Studio. So, I created New Project in Developer Studio, then in Workbench settings selected my
-
This script is the problem Script: chrome://mozapps/content/downloads/download.xml:68